Database Users

finally audio out from ms stack

hi, finally there is software to enable the audio out from ms stack to bluetooth headset. but i tried on xdaii wm5 still cannot. can anybody especially buzz fix this? Get the software from below link.
http://www.beyondthetech.com/blogs/kjam/

audio out to headset
BTAudio Utilities
These utilities will allow you to turn on/off the redirection of all system audio audio to your Bluetooth Headset.
This requires NO other hacks or modifications to your i730.
The attached ZIP file contains 3 files:
BTAudioOn.exe
BTAudioOff.exe
BTAudioToggle.exe
DONATIONS
If you find these programs useful and would like to send me money, you can donate via PayPal here.
INSTRUCTIONS:
Unzip and place these files on your i730.
- To redirect all sound to your BT headset, run BTAudioOn.exe
- To stop redirecting sound, run BTAudioOff.exe.
- To toggle the redirection on and off, run BTAudioToggle.exe.
- The effects are immediate and the program will not display anything unless there is an error.
NOTES:
BTAudioToggle.exe does not authoritatively know what the current state of audio redirection is, it simply turns the redirection on or off, alternating each time it is run. It uses a temp file, \BTAudio.tmp, to track whether it should next turn on or off. Thanks to johntchow for the icon.
The /v command-line argument will display a sucess message. Failure messages are always shown. Also, if you know how to set up a shortcut, you technically don't need both .exe's. You can run BTAudioOn.exe with the /off argument and it will do the same thing as BTAudioOff. But since each file is less than 4k, which I think is the block size for the RAM file system, it would not actually save any space so what's the point.
This was made possible mostly due to the information at http://blogs.msdn.com/cenet/archive.../12/451012.aspx
Note; Buzz or any expert out there.Please make this utility work with xdaii wm2005c. Please.....Buzz?

:lol:
It works great on my K-Jam. Too bad it is only mono. But still better than nothing!
Wouter

ya. u r luckey fren. working on your k-jam, right?. but why it didnt work on xda11wm2005c with hs820? the mic got responses from the utility but the sound still havent transfer to the bluetooth headset. Ooooo....someone who know software, please help to make this utility work. Moat of the people without widcom installed already started to enjoy all audio transfer to their headset except xda11. Buzz, are u there?

this is the original thread from pdaphonehome.com http://pdaphonehome.com/forums/showthread.php?s=&threadid=54951

When i try to turn the audio on it writtes "Failed to enable BT audio".
What have o done worng. I have put the files in Application Data. It is a Qtek 9100

Did you first turn on your bluetooth?
Sometimes this happens to me too but I now only use the BTaudioToggle tool. I made a shortcut on the todayscreen and it works great!
Wouter

Will this transfer the mic too? I would like to use it for my voip program.
John
www.skynetworks.gotdns.com

I can still use my headset for phonecalls but I don't know if it will work with a computer and VOIP. Haven't tried that one yet!
Wouter

Doesn't work on i-mate jam though
Hey, guys. Found out this great featured hack and still haven't been able to toggle ALL audio out of bluetooth headset on my i-mate jam. Doesn't work! I can only redirect audio from GSM source to headset and back, but can't redirect music from audio players.... seems to be the problem of JAM bt stack...
Who has the same problem please respond

audio out to headset
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino

Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?

hi guys
don't suppose anyone has tested this stack on the IMATE JASJAR ?
Cheers

ANy one tried this on an MDA compact UK, or MDA PRO UK
I sure hope T-mobile relase a new ROM with A2DP , streaming support now MS have officially improved their own stack.
http://www.theunwired.net/?itemid=2762

tgmweb said:
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?
Click to expand...
Click to collapse
I've managed to do it by using the information that can be found at http://forum.xda-developers.com/viewtopic.php?t=33756. If you set the registry value then the files work a treat (but are a bit redundant because you can switch the audio to/from headset using the button on it).
Cheers,
Steve.

have you guys tried VJVolubilis? It should work in the same manner.
V

Hi Guys!
Uuupppsss ....
unfortunately the download of the ZIP file is still not working. could anyone of the honourable sirs share it with me?
Thanks in advance.

Possible solution - Listen MP3 via bluetooth headset

I find this bluetooth headset which the company said that it can be used to listen music via bluetooth headset. Simple installed a program call MSI BluePlayer for WM 5.0 and pair their headset.
Product : MSI Free Style FS110 (Attached photo)
Web site : (Chinese Only)
http://cweb.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=619&kind=8
Non-official Web site : (English)
http://www.mobilewhack.com/reviews/msi_fs110_and_fs120_bluetooth_headest_music_transmitter.html
I tested my 818pro which cannot work properly. Actually, it can connect my i-tech R35 & 818pro and listen mp3 (stereo sound)....only 30s and said it only support MSI Product. (Attached a screen shot).
I need to buy this product and test whether it work. I will be updated this post.

Easier Fix
Try this program it just keeps your headset connected to your pda so you get streaming audio. good luck

sas90850 said:
I find this bluetooth headset which the company said that it can be used to listen music via bluetooth headset. Simple installed a program call MSI BluePlayer for WM 5.0 and pair their headset.
Where i can get the above software for testing ???
Can u give me link to get it?
Thanks
Click to expand...
Click to collapse

Somehow, my bluetooth headset from Sony Ericsson has always been able to pick up mp3's and system sounds from my Prophet.
Don't know why that is, or if it is supposed to do that...

thulsey said:
Somehow, my bluetooth headset from Sony Ericsson has always been able to pick up mp3's and system sounds from my Prophet.
Don't know why that is, or if it is supposed to do that...
Click to expand...
Click to collapse
how do you do with your headset? I've a sonyE headset but i can do with my prophet.

Asturias said:
thulsey said:
Somehow, my bluetooth headset from Sony Ericsson has always been able to pick up mp3's and system sounds from my Prophet.
Don't know why that is, or if it is supposed to do that...
Click to expand...
Click to collapse
how do you do with your headset? I've a sonyE headset but i can do with my prophet.
Click to expand...
Click to collapse
That's a good question - it used to do it when I didn't WANT it to, and it hasn't in a long while... I would hit play in Windows Media Player and it would pipe through to my bluetooth headset.
I'll look into it - but off the top of my head I am guessing it was because I uninstalled Cyberon Voice Commander and the button map still held...
The sound wasn't all that great, but it functioned...
I'll see if I can reproduce it. I have reinstalled Voice Commander since.

did you mean you uninstall voice commander and system sound transfer to headset. How to uninstall voice commader, remove it from extrom???

A2DP for Alpine

Is there a download for A2DP for the Imate PDA 2 that is available and reliable ?
I see some of the other devices are getting this to work, but I haven't seen for the Alpine ? I'm trying to get this to work with a Bluesonic Blue ant bluetooth speaker. It works with the speaker in phone mode but the audio qulity is poor (phone quality).

A2DP is perfectly work on Alpine. Even with keys support!!!

Hmmm- I've had a reasonable go at trying. Anywhere i can get some information on how I should be doing this ? Maybe I am missing something ?

my xdaIIi run A2DP perfectly.
After you install the patch, setup an extra partnership with your BT earpiece or speaker whatever with the high quality audio mode under the BT manager.
After the setup, connect the device and press the talk button in your earpiece, play the music and the sould is perfect (almost)

A2DP for Alpine... where is this patch?
Hello,
So... it works perfectly... but with a patch. Good news.
What patch is that?
Where can we find it?
How do we install it?
Thanks in advance!
-Lostgweilo-

Re: A2DP for Alpine... where is this patch?
lostgweilo said:
Hello,
So... it works perfectly... but with a patch. Good news.
What patch is that?
Where can we find it?
How do we install it?
Thanks in advance!
-Lostgweilo-
Click to expand...
Click to collapse
here is it. After installation, you can find the high quality audio and keyboard setup in the bluetooth manager

My I-Tech R35 works nearly perfectly with the alpine. Every now and then the sounds cuts out for a second or two and then comes back. As if there is not enough 'bandwidth'
Any ideas? Any reg tweaks?
Thanks

Sounds like a CPU priority issue...

I found out what the problem was....
Wifi interferes with the bluetooth
Doh! Can't stream BBC Radio 1 anymore lol
Thanks

moghisi101 said:
My I-Tech R35 works nearly perfectly with the alpine. Every now and then the sounds cuts out for a second or two and then comes back. As if there is not enough 'bandwidth'
Click to expand...
Click to collapse
Hi, could you use the forward and backward keys on your i-Tech R35?

I use r35 also, but can not use >&< or pause keys

frankrick said:
moghisi101 said:
My I-Tech R35 works nearly perfectly with the alpine. Every now and then the sounds cuts out for a second or two and then comes back. As if there is not enough 'bandwidth'
Click to expand...
Click to collapse
Hi, could you use the forward and backward keys on your i-Tech R35?
Click to expand...
Click to collapse
No, I could not. The play/pause also did not work. However, I believe that they do work with TCMP (I use PocketMusic). Volume buttons work regardless. Also, the A2DP profile does not pair automatically with the R35 even if I press the Multi-Function Button!! But damn, the audio quality is amazing now.
All the media buttons work when used with my A2DP hacked Wizard (o2 XDA Mini S)
cya

moghisi101 said:
No, I could not. The play/pause also did not work. However, I believe that they do work with TCMP (I use PocketMusic). Volume buttons work regardless. Also, the A2DP profile does not pair automatically with the R35 even if I press the Multi-Function Button!! But damn, the audio quality is amazing now.
All the media buttons work when used with my A2DP hacked Wizard (o2 XDA Mini S)
cya
Click to expand...
Click to collapse
Thx, I got it! I might have a try with TCPMP player on my XDA IIi. I just wonder why they don't provide the AVRCP patch at the same time.
Anyway, I checkd the picture of XDA IIi's PCB board and found that the bluetooth module of XDA IIi is UGXZ5 which manufactured by ALPS, a japanese company. This UGXZ5 supports the Ver1.2 of bluetooth spec. However, HTC utilizes the bluetooth driver software that coming from Broadcom.

This may be an obvious question, but how do you install the BT patch mentioned above?
Cheers;
pc

Download the CAB file to your PC, then transfer it with Windows Explorer or ActiveSync to your PPC (Go to My Computer and then Mobile Device or click Explore in the ActiveSync window) and then on your PPC use a file manager program (File Explorer) to browse to the directory you saved the CAB file to, and then click it. It should automatically install and then delete the original CAB afterwards.

Flawless; Thanks a lot.
Cheers;
pc

Hi,
Is there a patch that will allow the BT to work without the phone being on, as currently need the phone on to use BT.
Thanks
Gordon

has anyone got A2DP to work with the htc820 + windows media player? I have had it working with tcmp but after taking a call the audio isn't rerouted via the headset?

Just pause TCPMP before answering phone. And then music will resume ok.

Play music through bluetooth headset?

Is it possible to play music through a bluetooth headset? Not a stereo headset, just a normal, mono headset.
If so, does it automatically pause the music when you get a call?

yes you can using the bt audio software on http://www.htcwizardweb.net/system/files?file=btaudio.zip
download it unzip it and copy the folder to your storage card or your pda and enable or disable it at your convinience. hope i was helpfull

I tried that BT Audio app with the 750, and it doesn't work. I also tried every media player I could find...still nothing.
Has anyone had success with this theory working? I need it in a BAD way.

Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!

What I do for my 8125 is activate the BT toggling program and then Mortplayer. I tie the two programs together using MortScript and then activate a playlist through voice command by creating a shortcut into the Programs file.

usng bt headset with htc wizard with fafio crossbow
yes it is capable to do this i have wizard htc running clocking at 286 speed, tomtom mobile 5, with the jabra 2020 bluetooth earpiece all works great gps every single thing to do with sound comes through ear piece even key tapping try this program called btnav you can download it then allocate one of the the buttons to activate it as i do. my normal day using gps system intails switching on earpiece then wizard, pushing allocated button my earpiece beeps then start tomtom all works great then when at work i can listen to audio tracks aswell great little toy hope this helps

zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
BEAUTIFUL THING

Bluetooth Audio
I've downloaded the bluetooth audio to my Samsung Blackjack II and installed it. I have tried several combinations of steps to get the music to play through my headset but I cant get it to work. Do you have any suggestions for me? Is there a specific bluetooth headset I need to get? Or did I just mess something up?

Hey thanks alot for this cab because I've been looking for this cab all over and finally you had the solution to my problem.....

I just installed that cab file and while it seems to function correctly by sending music to the earpiece on the phone, it does not send it to the BT device. The BT device acknowledges when the program is turned on and when it is turned off, but no sound is coming out.
I'm using a Blackjack2 and an Isymphony BT headset/speaker which is not stereo.
I just want to be able to hear my phone on my BT headset/speaker.
Is there some setting I'm missing? Does this program not work? Why for some and not others? Where can I find documentation? Who made that program?

Well, I dont know why you blackjack people are here(this being the Wizard forum and all!), but what I used to use on my Excalibur is the little shareware program called:BTAUDIO(link at bottom of post)
Its shareware in the fact that it only works for 30 minutes at a time, but it does indeed send ALL audio that the phone emits to your bluetooth headset.
Instructions:
1-Install BTAUDIO .cab to your phone
2-Activate your bluetooth headset, and put it in "find" mode
3-Goto your phones comm manager and turn Blueooth on
4-Now pair your headset with your phone
5-Start BTAUDIO
6-Follow the instructions on the screen and BAM, you are done!
I hope that helps!
DOWNLOAD LINK FOR BTAUDIO=
http://www.megaupload.com/?d=9MLLW0MC

Thanks for the reply.
I gave this program a try and it didn't seem to work either. I'm guessing it's a BlackJack problem. That download appeared to be pretty much the same thing as the other link to the "BTaudio" program by Triangle but is limited to 30 minutes, like you said. The first link was not limited to 30 minutes. (so you might want to check that one out)
As for why the Blackjack guys are coming here I'm guessing it's the same reason I found this place. A Google search.
The Blackjack forums don't seem to have any solution other than... "go spend another $75 on a new set of headphones"
Myself, I want to use a BT mono speaker for listening to mono recordings and don't really want a stereo headset.
Thanks for all your help!

THANX for the CAB file
REaly thank you for the cab file works gr8.......................................

Thanks...
This one is very nice. I can't speak for others, but here is what I've learned in a short time....
My personalized ring tones are now coming through the BT, along with the called annoucement. Sorta disorienting, but I like it. I bet if I disable call annoucements, this will fix it. I'll look around..... Thanks for this tweak....
I love it!

thanks
hi this is the first time i am using this site hope it works

I just intalled this cab on a Samsung Ace i325 6.1 (Sprint). I'm using the Jawbone II bluetooth and it works perfectly! Thanks for the cab file.

Hi ,
i really appreciate you cooperation about this issue
i have the same problem but with java platform phone SE w550i) with bluetooth headset
i need a java application that let me hear the music via bluetooth headset (application like msi blue player) in jar format
Can any one help (regarding that my bluetooth headset support a2dp and w550i has no problem with that just need application to stream audio through bluetooth headset)
thanks in advance
my mail is [email protected]

THANX for the CAB file

zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
thank you bro you solved my problem

This application works awesome... Great work
One issue occurred.... The BT Audio is switched ON, i receive a call, i answer/end it. After the call ends, the music is routed back to the phones speaker. I have to switch ON BT Audio again.
Keep up the good work

Bluetooth Mono Headset + Redirect sound to it

Hi,
I been trying the BtAudioNav to redirect sound to my bluetooth hands-free but it doesn't work on my Trinity.
Anyone has try it with success?

Most mono-headsets do not support the A2DP profile.... so it is to be expected that this doesn't work for music and stuff...
However, i had it working once on my old Fujitsu Loox 600...can't remember how i did that though, but it has a different BT stack anyway...
Or do you just mean the phone-calls being redirected does not work ? Please try to be a bit more specific

Phone-calls works but for example redirect sound from GPS soft to headset not!!. With BtAudioNav should works but with my Trinity not.

Not all phones are capable of directing all audio to the mono bluetooth headset using the handsfree/headset audio gateway profile. Many of them are designed to ONLY stream voice calls. I'm not sure if this is due to the hardware or software (possibly a combination?), but some phones are capable of streaming/redirecting all audio entirely (as well as mic input) to the mono headset. I guess the Trinity doesn't. I've only heard of a few phones that actually work with that BT audio utility you're using, and they seem to be mostly older models, but that's just a guess. Anyway, perhaps there's a way to redirect all audio through the stereo bluetooth profile instead?

1. Copy the folder BTAudio and its contents to \Program Files
2. Using a registry editor amend the following entries from:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
3. Softreset

What does the above tool do exactly?

Tiemen said:
What does the above tool do exactly?
Click to expand...
Click to collapse
Yeah...i'm very curious to what this does too...
Could this by any chance connect a Stereo BT headset in Audiomode by just clicking the .exe ? (ie not having to go into BT settings in the comm manager screen ?)

Moaske said:
Yeah...i'm very curious to what this does too...
Could this by any chance connect a Stereo BT headset in Audiomode by just clicking the .exe ? (ie not having to go into BT settings in the comm manager screen ?)
Click to expand...
Click to collapse
Yes, can you please be more specific as to how this works? Does it interfere with voice dialing or making/receiving calls?
I have an Axim X50v which works just great with Skype and my mono Flamingo BT headset. Now I have an HTC P3600 and Skype won't work through the headset.
Bloody technology seems to go backwards :-(
Thanks.

qyach said:
1. Copy the folder BTAudio and its contents to \Program Files
2. Using a registry editor amend the following entries from:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
3. Softreset
Click to expand...
Click to collapse
After editing, VoiceCommand function is LOST .
All sounds will be re-directed to the blutetooth headset when you press the button(voice dial) on the headset.

Guys, please DO read my past articles and/or use the forum search engine to look for them. At http://forum.xda-developers.com/showthread.php?t=281977 , I've explained everything you need to know.

Did anyone get BTaudio working on their Trinity?
BtAudioToggle opens a link with my mono headset ( I hear hissing in ear piece) but media still plays through Trinity speaker.
I read the Hermes forum about a different reg hack. http://forum.xda-developers.com/showthread.php?t=278778
Whats working for people?

Perfect audio re-direction with Jasjar & Jabra BT250v
that was very neat & BRILLIANT !!!
got my Jabra BT250v without knowing these issues. on discovering that my jasjar was not capable of audio re-direction to Jabra.....I was shattered. ROM upgrades r scary to say the least.
after a day of frantic search & many failed softwares, this one did the trick. 'qyach'.....many thanks for this.
now my Jasjar & Jabra work perfectly with TCPMP & Skype. Voice command continues to work from the Jasjar mic.
I couldn't ask for more.
THANK U ONCE AGAIN !!!

Tried VJVolubilis, Bluemusic and BTAudio (with both of the 2 registry hacks referred to in this thread). None of them worked on my Trinity. Would very much appreciate someone shed more light on this issue.

qyach said:
After editing, VoiceCommand function is LOST .
All sounds will be re-directed to the blutetooth headset when you press the button(voice dial) on the headset.
Click to expand...
Click to collapse
Doesn´t work on my Trinity
Edit: don´t know why but now it works. Only that I have to press the voice dial button twice (?)

Hi,
I got the Motorola T305 to connect to my TyTN and the audio gateway routed to the T305. Everything sounds great but I get this annoying beep once every 5 seconds. Does anybody know how to get rid of it?
Thanks,
Sean

JUST SORTED IT on my TRINITY all workin fine
Only problem is, as the article suggest it disables the voice commands!! I can live with this as I only want to stean the TOMTOM voice when using the satnav while walking or on my bike.
What I had in mind was a a couple of icons, one to make the registry changes for the BT Audio streaming and the other icon to toggle back (ie change the registry back to voice comand via the BT headset). As far as I can see (once BTaudioOn.exe is copied to my Trinity) the only difference between turning my Jabra BT250v into an audio streaming headset and a phone headset are the two registry changes; and then change them back to give me a Phone headset again.
Can anyone tell me if this is possible to use a .REG file?
Can it be written on a PC and then copied to the Trinity so that it runs?
Will reg files run the same on a PDA and they do on a PC?
Thanks in advance

New app?
Can anyone make an app in which you can configure which feature you want?
1) Change to Voice Dail
2) Change to Voice Command
3) Change to a redirection program like BTAudio.
and got to set the delaytime too

Destination Gotland Bluetooth Mono Sound.cab
I installed this, no registry changes, etc. and it works great. you toggle between unit speaker and the headset by hitting the button on the BT headset. It is great for Skype.
The Cab is in the Zip. I think I picked it up off the tutorial here:
http://forum.xda-developers.com/showthread.php?t=281977

Battery Problem
OK, the solution I posted does work well. However it just killed my battery life. I think that whenever the BT is paired, even in the regular mode (not streaming to the mono BT) it uses the full amount of battery as if it was streaming to it. I think the battery life was even reduced without a paired headset as long as BT was not disabled.
I guess I am still looking for a better solution too.

qyach said:
After editing, VoiceCommand function is LOST .
All sounds will be re-directed to the blutetooth headset when you press the button(voice dial) on the headset.
Click to expand...
Click to collapse
THANK YOU !!!! works purrrrrrrrrrfect !!