Can't access Internet via dial-up - 8125, K-JAM, P4300, MDA Vario General

Hello,
I just bought a SPV M3000 that I unlocked, find if really great, but have one major issue, I used to connect to Internet with a dial-up number with my Qtek 9090 and wanted to do the same with my SPV, but impossible, I configured everything correctly (even tried 2 different Internet providers), but nothing, the SPV just dial the number and then nothing happens, it just says after 1 minute appr. that the connexion is impossible and I should check my parameters...
Is there a correlation to the fact that I unlocked it ? Or is there an issue with my modem and if yes how could I check that my modem doesn't work ?
thanks for any info on it.

Related

http timeout errors

Orange SPV M1000.
A large number of our users, all in different parts of the country seem to connect to gprs ok but when trying to connect to any web addresses, after a minute or so get 'Browser warning. Cannot read page. HTTP request timeout' errors.
I have an SPV myself and am getting the same problem. However if I put the SIM from the SPV into my own personal Orange P900 I can connect to web addresses okay. Which points to the SPV M1000 itself. I know the aerial in the SPVs are rubbish at the best of times, but for them all to have worse problems than normal all at the same time seems a bit odd.
As usual Orange are denying there's a problem with their orangeinternet GPRS network.
Any ideas anyone ??????? Pleeeeease.

Using a jasjar for internet on PC through bluetooth

I can seem to get this to happen, when I setup a bluetooth connect from my laptop to my Jasjar all the laptop see the Jasjar as is a modem and wants me to fill in a number to dial, I want to just make a connect so I can use the Vodafone connect software on the laptop so it can use the 3G connection through the phone, I can use a usb connection as my usb port is broken, so unusable, any one know what I am doing wrong?
So you want to browse thew internet on your laptop, using the universal as a 3g modem?
If so when Vodaphone connect asks for a number use *99# That should make the phone use it's default 3g GPRS connection.
Hi and thanks for the reply but I am still having problems, I even tried and used my Jamin and it seems to do the same thing, create a modem connection and thats it. I have a Vodafone Mobile Connect account and when i try to run the software it can't find the phone through bluetooth because i can pair the phone and the laptop as I think all the laptop wantes to do is connect to the phone if it needs a modem. I don't really understand what is going on here. Has anyone done this before?
Hows this for crap, I just phoned i-mate and they told me you can't use any i-mate phone as a modem over bluetooth connection, you have to use the USB connection to use the phone as a modem. I find that very stupid. :evil:

Vario II Bluetooth internet connection with PPC...?

I have a Ipaq 4700 and have managed to pair it up with my Vario II and able to go online and browse with the Ipaq but will I be charged as I havent entered any dial up number or selecting bluetooth modem, is this using a differnt connection as to the web&walk? maybe wap instead of 3g ? I dont fully understand these diffrences so I'm not to sure
I have sussesfully used it as a usb modem for my laptop for awhile and everythings ok there, as the laptop conection dials *99# and uses the web&walk.
Thanks for any advice, Chris

Qtek 9090 and Claro

As STK do not work in WM5, I can't get mms/email/internet configurations from Claro, for my 9090.
Then I ask: someone knows what is the exact configuration for Qtek 9090 and Claro ??
I've searching the fóruns and found the configs for 9100, but I think it's not exactly the same in 9090....
Thanks.
cellphone companys dont have special settings for each phone on their network
1 setting to rule them all
Rudegar said:
cellphone companys dont have special settings for each phone on their network
1 setting to rule them all
Click to expand...
Click to collapse
I know that. But the point is were you write these configs change from one phone to another....
An I want my 9090 to use internet in many forms, like USB connction, wifi/bt share and GPRS...
If I put the configs in wrong place, I think that will not work as I want....
i go into connection advanced when i want to choose if i use my internet for my isp or my network
Ok. And how to make that auto ?
Like that: I have Wifi and GPRS connections established. When I start PIE it connects by wifi. If I have BT and GPRS, it connects by BT. Only connects by GPRS in case I have only GPRS up...
Priority order:
1 - Wifi
2 - BT
3 - USB cable
4 - GPRS
9090 can do this automatic?

Help! Dopod 838pro internet connection via bluetooth problem

Need help from expert here. Help me to analyze this problem. Before that, i have to explain the way i used my phones 1st.
I have 2 sim cards. i call it SIM 'A' and SIM 'B'
SIM 'A' - Maxis - used for normal voice call, sms etc
SIM 'B' - Celcom - data unlimited only.
To utilize this 2 SIMs, i use SIM 'A' on a PDA phone and SIM 'B' on a bluetooth enable phone.
To surf internet, i configure my PDA phone to connect to the phone with SIM 'B' via bluetooth.
In another word, i use the bluetooth enable phone as a modem only.
Okay, here is my problem.
Dopod 818pro connect to V3xx - no problem. Can surf up to 30min without being disconnected.
Dopod 838pro connect to V3xx - being disconnected all the time. Can't even surf more than 1 min.
Dopod 838pro connect with Sony Ericsson Z600 - no problem. Can surf up to 1 hr without being disconnected
The annoying thing is every time being disconnected, i must restart the v3xx in order to be able to reconnect again.
So, what will be the most possible problem?
Although both dopod 838pro and v3xx are still under warranty but it is very difficult to do the troubleshooting by both service center..

Categories

Resources