Qtek 9090 and Claro - Networking

As STK do not work in WM5, I can't get mms/email/internet configurations from Claro, for my 9090.
Then I ask: someone knows what is the exact configuration for Qtek 9090 and Claro ??
I've searching the fóruns and found the configs for 9100, but I think it's not exactly the same in 9090....
Thanks.

cellphone companys dont have special settings for each phone on their network
1 setting to rule them all

Rudegar said:
cellphone companys dont have special settings for each phone on their network
1 setting to rule them all
Click to expand...
Click to collapse
I know that. But the point is were you write these configs change from one phone to another....
An I want my 9090 to use internet in many forms, like USB connction, wifi/bt share and GPRS...
If I put the configs in wrong place, I think that will not work as I want....

i go into connection advanced when i want to choose if i use my internet for my isp or my network

Ok. And how to make that auto ?
Like that: I have Wifi and GPRS connections established. When I start PIE it connects by wifi. If I have BT and GPRS, it connects by BT. Only connects by GPRS in case I have only GPRS up...
Priority order:
1 - Wifi
2 - BT
3 - USB cable
4 - GPRS
9090 can do this automatic?

Related

WIFI and GPRS connection priorities

Hi all,
I have an XDAII from the Spanish carrier Movistar (TSM500). I want the device to access internet. I have WIFI in my office, so I would like to use this infrastructure in the device instead of GPRS.
I have a SDIO card from SOCKET that works correctly with the device and I can connect internet via proxy.
I would like to know how must I configure the connection settings in order to make it transparent. I mean, if there is WIFI the device must use WIFI it not the device has to use GPRS.
Does anybody know the settings I must to apply to the device network configuration (work,internet…) in order to get this WIFI, GPRS priorities?
Thanks and regards from Spain
...and to make your question more complicated, to setup wifi with proxy, gprs with no proxy and mms connection with no proxy. All these together?
so be it - manemoi
T,
Exactly!
Hey Manemoi, that's EXACTLY What I would like!
Is there a way to have the Magician choose this automatically? For instance, I can use my Sandisk SD WiFi 256 only when I set both my ISP and Work settings to an emtpy profile. It then seems to know it should use the WiFi connection available. I can then Internet, send mail Everything! Perfect! When I take out my WiFi card and activate my Active Synch with BlueTooth, it works too, Can internet over Active Synch without problems. But Mail will connect but then not send mail for some reason...
Whenever I want to use GPRS, I gave to goto connections and then manually change the modems there for ISP to my GPRS Modem Setting. Isn't there an easier way? Can't Internet explorer be told to use whatever conection available? Instead of ALWAYS connection to whatever is set under the My ISP setting?
I'd be interested if you ever got an answer to this as I am now at the same point
I'd be interested if you ever got an answer to this as I am now at the same point
Anyon e work this out?

MDA Pro WLAN connected but he want go online with GPRS

hi, i have the problem, that my mda pro is connected via wlan (DHCP, correct ip and i can use some ip tools to make tracerout etc, so this is working fine.
only internet explorer and icq and agile messenger want to make connection by gprs.
why?
what i am doing wrong?
any idea?
thank you, Wolf
I also have the same issue. Havent had time to work it out yet!
My router settings have all been checked:
MAC address filtering
WEP 128 encryption
DHCP
I can join my home wireless network but like you said no surfin once connected.
Very frustrating. :evil:
i think i found the problem:
if i switch on the mobile phone radio, it works.
it seems to me that only than he can choose between gprs or wlan if radio is on...
please check it...
wolf.
Sorry but what do you mean by switiching the radio on?
Do you mean the wifi?
Surely you need the wifi on in the first instance to be able to join the network?
he means the phone (i.e not in flight mode :wink: )
I have a similar problem but that is for file exploring on a networked pc it keeps trying to dial gprs :x
I tried again lastnight and it maybe becuase I have WEP 128 enabled on my router. I dont really want to go any lower than 128 encryption because the security on that is already pretty pants.
I'll give it another go on just standard WEP just to ease my conscience!

Q: Laptop->WM5->GPRS ?

Appologies in advance for the daft question. I was wondering if its possible for me to configure my Wizard as a gateway to the internet?
From my Wizard, once I've established a GPRS connection I can browse/surf the internet, but I'd like to be able to connect with my PC and browse the intenet.
Any ideas?
Thanks in advance and once again, sorry for the newb question.
Adam
I won't have a Wizard. But, let me guess
Try switching on your Wizard IR and point it to your PC. It things goes well, your PC should say some hardware detected.. and it should have a modem class hardware, which should enable you to connect to the net. Try fiddle with it. That is what's on offer from my SonyE phone.
Is it possible to make a connection through usb cable?
jep, you can use youre wizzard als a gprs modem for youre laptop.
start with going trough
[start]
[programs]
[modem link]
plug in the usb on bove sides (wizzard and pc)
youre pc will find a new deviece.
Insert youre cd from t-mobile with applications. On that cd is also a set of drivers for the wizzard modem function. (just tell windows to search the cd the rest will be done automaticly)
go to connections on youre pc.
create a new connection.
make sure it's pointing to youre new added modem (wizzard).
use for the phone number *99#
have a little patience and wola youre welcome on the world wide web.
ps if you are dutch try this post on a dutch forum which is maybe more clear
adam_j_bradley said:
Appologies in advance for the daft question. I was wondering if its possible for me to configure my Wizard as a gateway to the internet?
From my Wizard, once I've established a GPRS connection I can browse/surf the internet, but I'd like to be able to connect with my PC and browse the intenet.
Any ideas?
Thanks in advance and once again, sorry for the newb question.
Adam
Click to expand...
Click to collapse
Both IrDA and USB will work as described above. IrDA, on the other hand, is not the way to go if you have EDGE - IrDA's maximal 115 kbps is slower than the maximal about 175 kbps of EDGE.
If you have Bluetooth support in the notebook, you will want to read this tutorial on setting up the Wizard as a Bleutooh modem: http://www.pocketpcmag.com/blogs/index.php?blog=3&p=510&more=1
"Modem link" worked a treat - thanks!
For Vodafone Australia, I needed to send the following init string
"at+cgdcont=1,"IP","vfinternet.au"
Adam
Pity the GPRS counter doesn't work!
Any Drivers for OSX for my powerbook?
Interesting topic...
is there similarly a way to use WiFi from the Wizard on a laptop, via IR or USB?
Couldn't get this to work while recently at a hotel where the laptop couldn't see the hotspot anywhere in the room, but the wizard could see it everywhere in the room! =)
No.
What you need to do that is known in the Winblows world as "Internet Connection Sharing", or "ICS", and its not in the WinCE build. At all.
Going the OTHER way however - having your Windows laptop serve up the GPRS connection to a whole host of other machines on an ad-hoc Wifi network - that DOES work!
HI there i donot have modem drivers in my cdrom. Please if any one can post the drivers file on this page it will help a fellow pda user a lot.
Thank you very much in advance.
Here you go, enjoy. Tried it and I got 150 - 175 kbs at www.dslreports.com/mspeed @ 200k and 600k tests. Granted it was at 12:37 a.m. and not a big load on the network cause everyone is probably asleep.
Hmm, becuase of this, now I want to sell off my unlocked sierra 775 edge card because it's of no use to me now. Man I love this phone more and more!
Cheers,
Mike
Hi all,
I am able to use my MDA Vario as modem for my laptop connecting the MDA Vario via USB but when I connect I do not see the GPRS connection on my MDA Vario connecting or being used so a big G stands in the top of my screen instead of a G with two arrows below it.
I use as modem settings:
Dial number *99#
Extra initialization command +CGDCONT=1,"ip","internet","",0,0
Is GPRS used now?
If not how can I configure the MDA Vario or modem on my laptop in such a way that is use GPRS?
I think the "G" icon does not change even if it is connected.
in the modem setting replace the word " internet " with your providers GPRS setting,
in the case of t-mobile it will be " internet2.voicesream.com"
and that's it!
When I change "internet" into "internet2.voicestream.com" I am not able to connect at all and when I have this setting set to "internet" I am able to connect and use my MDA Vario as Modem.
The only thing I am very interested in is how do I know if I am using GPRS or normal modem as connection? This because I have a GPRS abo and I do not want to use my normal phone abo for modem connection.
Does anyone know if the internet setting is OK and how I can see if GPRS is used?
Thanks.
yes, that I know it will use the GPRS or EDGE conection, It is only convinient if you have an unlimited data plan.
I dind't notice that you where in the us, look up in you photo what you use to connect to your GPRS setting, and then use the same onenceon the computer in the HTC modem window.
internet2.voicestrem.com is only for the unlimited data plan in the USA with T-mobile..
http://www.taniwha.org.uk/gprs.html
this is a link with some setting
The page you have mentioned http://www.taniwha.org.uk/gprs.html mention to use internet-act for settings in modem and I am not able to connect using internet-act. I only use internet as setting in initialization string and I can connect.
I am located in the Netherlands and I assume that this is the correct configuration to use my MDA Vario as modem for my laptop and connect via GPRS. Will see on my next bill. .
kuykhoven said:
Extra initialization command +CGDCONT=1,"ip","internet","",0,0
Click to expand...
Click to collapse
And what does these paraqmeters all mean? Any reference "manual" to them?
Having my Wizard GPRS/EDGE working fine through Bluetooth. Anyone else having iteruptions in the connection?
HI there
i am using O2 atom and i cannot connect through modem link. Please help.

GPRS Always ON Hack and WIFI

I've used the Registry Hack in order to have the GPRS connection always ON...whic is great on daily time.
However now, at home, while I want to use the WIFI connection, I've the feeling that WM5 is using the GPRS connection and not the WIFI one...as both of them are active, and when I start IE as exemple,...the system try to conenct againto GPRS.
How to define priorities between both? How to controk which connection s used?
Finally...I cannot really obtein the Disconnect from GPRS Button. I Have an Orange M3000 on WM5.
Thanks for your support
francesco

XDA 2 with T Mobile - GPRS Problems

Hi
I apologise in advance because I'm sure my problem is simply solved but I;ve not used the XDa for a while and I'm back to square 1. I have tried searching for the anser but I think my question is just to basic.
My XDA2 is unlocked and I use a T-Mobile sim in it. The problem I have is with the TOMTOM. When i try to update traffic info on the fly I get a message saying modem hung up (or something similar). It works fine when connecting via the cradle and my PC.
Now I think this is because the XDA2 is trying to connect using the O2 settings when I am on the road.
So my question is how do enter and then I get the XDA2 to use the T-Mobile settings?
EDIT: Sorry forgot to say so far I have done the following:
Start
settings
connections
Add new modem connection
enrtered T-Mobile
selected cellular line (GPRS)
entered access point as general.t-mobile.uk
user name as user
password as wap
Ok and update
seems it is connecting after all. Problem is I have to connect via GPRS first then up date the traffic. It's not picking up the connection if I just update direct from TomTom
any ideas?
I don't think you can do much about that, cause the tomtom, must automatically try to establish the GPRS connection.. like Internet Explorer does, it automatically checks if you have GPRS or Wi-fi connection, if not connected for you automatically. after reading your post. it does not start your GPRS connection, have you look into the settings of the tomtom, to see if he has an option that you can let it connect through your GPRS automatically?

Categories

Resources