Hi All,
please correct me, if I'm wrong: is there two revisions of Magician with Samsung and Toppoly display? And those displays are NOT interchangeable?
Or there are different displays only on S100 and S110?
I don't know about specific brands but there have been reports that there are differences between some Magicians regarding the Display. One is said to produce a better picture when in darker environments (I guess the older display that I also own) and the other is said to work better in direct sunlight but produces a less good picture in the dark.
Ok, now everyone is ought to disassemble his unit and have a look at the display brand and to what chip it is connected :lol:
s110 and s100 LCDs interchangable?
so are those LCDs interchangable (s110 and s100?)
anyone tried to mount LCD from qtek s110 into qtek s100?
best regards,
nographix
I suppose there are two versions of LCDs -
p/n 60H00032-00M - LCD Module, (LTP280QV-E01 Samsung)
p/n 60H00037-00M - LCD Module, (TD028STEB1, Toppoly)
This information is from Wizard Service manual; these LCDs are supposed to be interchangeable between Wizard and Magician but it seems that the are not. I tried to replace broken 60H00032-00M on my Wizard (O2 mini-s) with 60H00037-00M, but it does not work right - screen lights up but is all white. Another 60H00032-00M works fine, however.
So in fact I have spare 60H00037-00M LCD unit in case anyone needs to replace. It should be in working order but it is possible that it is malfunctioning after all. To replace you need to be able to open your pda and also to do some fine soldering to connect touchscreen module (what I have is LCD only).
Was this debate ever resolved?
My touchscreen is broken - it appears to be the Toppoly part TD028STEB1 (60H000037-00M)
I see many places selling reasonably cheap LCD's but they're neither Samsung or Toppoly - will they work with an S100??
If you still have your screen for sale kristsp then we can do a deal on that...
Cheers
Related
hi. i have an 8125 and i was painting and fell from the ladder. i wasn't hurt all that much but the the screen on my 8125 cracked and now there is bleeding everywhere inside my screen.
does anyone know if i can replace the screen easily by myself or where i can even get a screen?
i think someone was going to sell me a broken MDA (screen good) and wondering if that screen would work for the 8125.
thank you.
Hi!
There was similar discussion some time ago:
http://forum.xda-developers.com/viewtopic.php?t=51395
Actually I broke my screen too this weekend I ordered replacement from ebay, such as this one:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140005879931
I am going to try to replace it by myself according to Wizard service manual. In my case only touch screen is damaged - not LCD, but it seems that these come as one unit. If I will find that these can be separated, I will have spare LCD part. In my case I have O2 XDA mini s - I do not know if lcd is the very same as in Cingular 8125 you have.
theorist said:
hi. i have an 8125 and i was painting and fell from the ladder. i wasn't hurt all that much but the the screen on my 8125 cracked and now there is bleeding everywhere inside my screen.
does anyone know if i can replace the screen easily by myself or where i can even get a screen?
i think someone was going to sell me a broken MDA (screen good) and wondering if that screen would work for the 8125.
thank you.
Click to expand...
Click to collapse
Gutted for you m8. Hope you manage to get hold of something cheap.
Update to my previous post - after much tinkering I was able to replace broken touchscreen of my mini-s.
Some notes:
According to Wizard service manual there are two LCD versions:
p/n 60H00032-00M - LCD Module, (LTP280QV-E01 Samsung)
p/n 60H00037-00M - LCD Module, (TD028STEB1 Toppoly)
It seems that these are not interchangeable but I might be wrong. I was trying to replace my 60H00032-00M with new 60H00037-00M (whole module with lcd & touchscreen), however it did not work - LCD switched on but was all white. Then I managed to separate touchscreen from new module and replace it with my broken one. Seems that it is working now. It is possible to replace just touchscreen but care must be taken not to break it and some very fine soldering must be done.
To theorist - if you want to replace LCD by yourself you should check for exact part number of your LCD and find similar one - that should work.
So now I have spare and useless for me 60H00037-00M LCD Module (LCD only without touchscreen) that probably is in working order as I suppose that it is just not compatible with my mini-s.
In the US, HTC America can fix it. http://forum.xda-developers.com/viewtopic.php?t=49361&highlight=
Greetings !
I am the proud owner of Qtek 9000 for sometime now.
Recently i was given a second unit, that at first look has a broken lcd.
The person who gave me the broken Qtek 9000 said that it had fallen off and then started to have the screen problem.
When powered on, the lcd displays blue and white lines during the width of the screen and the backlit does not come on.
If i plug the device to a Win XP machine, its get recognized and trying to sync
I assume the device must be working and this is an lcd only problem, although i have not synced it.
After reading around the forum and looking at the service manual on the wiki, i have disassembled the unit to see if any of the lcd connects got loose during the fall.
It seems that all connectors are in place, so my next task is to find if the lcd screen or lcd harness (cables) are broken.
Does anyone have any idea what i should replace ?
I have the same problem with red and white lines
Do you find what is wrong ???do you change the screen?
Welcome to forums
Try to do a hard reset (instructions on the Wiki), if not working perhaps you have to replace it, have a look on marketplace, one member is selling one
Good luck,
After obtaining a replacement touchscreen for my Touch HD; (no problem, $45 Australian ex Hong Kong) and after much searching, can still not find any reference to replacing the screen only. Can it be done or does one have to dismantle the whole thing as demonstrated in the service manual? It looks as if the touch screen and LCD screen are glued or taped together, but presumably can be separated. Has anyone managed to do this repair? Just need a few more clues as to it's feasibility. My screen is merely cracked due to pressure. All still functioning. This is obviuosly not a unique problem, but the answers are elusive.
heres the service manual, hope be helpful....
enjoy..
http://mikechannon.net/PDF%20Manuals/HTC_Blackstone_Service_Manual.pdf
manual
Thanks for trying but as mentioned, I have the manual and its does not help. The question remains, does anyone actually have experience of replacing the screen?
Himalaya have two different Main Board?
I have two O2 XDA II, first one with broken LCD and the second one with broken LCD's connector. When I try to combining them, I found that the main board is different.
First one have LCD with P/N : 60H00022-03 and the second one have LCD with P/N : 60H00011-00, that's mean the main board series is different also.
I read the manual service, and it said the P/N is : 60H00011-00. Is that true that Himalaya published with two different series?
Please help me...
i have here my old tytn broken a part...the LCD screen in a brand new condition...i was wondering if it will fit on my kaiser?
looks pretty same...
HoLy4EvEr said:
i have here my old tytn broken a part...the LCD screen in a brand new condition...i was wondering if it will fit on my kaiser?
looks pretty same...
Click to expand...
Click to collapse
The only way it can work is if it is identical, not just similar. Even TyTn screens cannot be used with all other TyTns. The reason is that the TyTn for example had 3 different manufacturers of screen. Each one of those had a compatible digitizer circuit to match the screen. So, you might well find that a screen fits, the ribbon cable connects, but all you get is a white screen (because the screen is mismatched with the digitizer circuit) Manufacturers include the likes of Toppoly and Hitachi.
So, you need to check the product numbers on the back of the screens. Or indeed search these forums, I'm sure someone will have given details for the Kaiser or linked to a site that gives the product number (either the HTC code or the Manufacturers code). I'd check myself, but time is short.
Mike
mikechannon said:
The only way it can work is if it is identical, not just similar. Even TyTn screens cannot be used with all other TyTns. The reason is that the TyTn for example had 3 different manufacturers of screen. Each one of those had a compatible digitizer circuit to match the screen. So, you might well find that a screen fits, the ribbon cable connects, but all you get is a white screen (because the screen is mismatched with the digitizer circuit) Manufacturers include the likes of Toppoly and Hitachi.
So, you need to check the product numbers on the back of the screens. Or indeed search these forums, I'm sure someone will have given details for the Kaiser or linked to a site that gives the product number (either the HTC code or the Manufacturers code). I'd check myself, but time is short.
Mike
Click to expand...
Click to collapse
Finally I found you!!!
I think you are the expert that may help me
I have a broken Tytn ii LCD and i bought the replacment and the tools for dismantle from ebay.
everything is ready but what i lack is the method
I heared and read many threads that say there is a method to replace the LCD only with undo the 4 screws (without dismantle the base) and this what i want exactly.
Could you provide me with any instructions, photos, details that would help me ???
Thanks in advance
Hi all, my Hermes/JasJam LCD screen and front panel stopped working a while back with the whiting out issue, funny artifacts and non working buttons. I have pulled it apart quite a few times to make temporary solutions but none have lasted enough.
So now I'm looking to buy a used Hermes and jack the screen part off it and place it on mine. Now I know how to do this but what came to my mind was:
Buy the newer version of the Hermes and place it's front part on my old jasjam which would be like a mixed/modded Hermes.
So I saw the O2 Zinc and the TyTN II and i really like the front panels better than the original hermes ones. So, before I buy one of them, does someone know if the ribbon cable is the same as the original one that connects to the phone's mainboard?
Any help much appreciated!