Database Users

Tmobile GPRS with XDAII

I have gotten a XDAII and have it setup and working, however the gprs only connects when needed and won't stay permantley on. Has anyone else found this to be true, or is there a way to make it stay connected?

you have an o2 XDA II or an Imate or a MDA II?

andygee said:
I have gotten a XDAII and have it setup and working, however the gprs only connects when needed and won't stay permantley on. Has anyone else found this to be true, or is there a way to make it stay connected?
Click to expand...
Click to collapse
I dont have any other known answer to that to fix it but there's a program on PocketGear.com called GPRS Keep Alive. $2.45 to buy it and there's a trial too so give it a try.
Her's the link incase you want it:
http://pocketgear.com/software_detail.asp?id=12673
But if you guys have alternate fix let us know, pls.

Here's a solution I've done to my XDA II with T-Mobile GPRS problem. I don't know who came up with this solution, but thanks to my friend who suggested this at PDAMobiz.com.
1. After a hardreset and completing the initial screen alignment, interrupt the auto-installation process by softreset your XDA II (you have 3 seconds before the files in Extended_ROM will automatically install).
2. Make your Extended_ROM viewable, whether by using the Extended ROM Viewer from http://www.ppcw.net or Extended ROM Switcher (sorry I forgot the link).
3. Now, install each cab files, except TMD_AP_NL.sa.CAB. In fact, I also disregarded, Caller ID, and some other TMD stuff.
As a result, the GPRS is now always-on as it should be.
Cheers,

How do I revert back to MDA PRO from I-Mate Jasjar?

It seems that I can't make 3G call anymore after flashing it with I-Mate Jasjar's rom.
Is there in anyway to revert back to the MDA Pro?

I went to the wiki for Universal earlier and it seems no-one has uploaded the flashing-upgrade file for t-mob yet.
I can upload the ext-rom from my MDA pro for you if needed, but I suspect there's more to it than running a few .cab's.
Joe

Thanks Joe (^__^)
I just figured out how to make 3G calls work..
Settings>Connections>Advanced
and set up the 3G connection (just take the gprs connection username (user) and password (one2one))
and it should work (3g i mean )

It's definitely one of the i-mate cab's that enables 3G calls.
I hard reset my JasJar, and hit the soft reset button before ANY cab's installed and my video call option disappeared...
I hard reset it again, and let the first two cab files install before hitting the soft reset button, and video calling was back again (along with the i-mate skin for the phone dialler, and the SmartDialler app) can't remember what the cab's were called, but one of the first two that are installed after a hard reset on the JasJar is definitely the one that enables video calls.

Anyone else having GPRS problems ?

Hi,
I would like to know if anyone else has GPRS problems with the QTEK 9100 ? It hangs up as it wants (once every 10min, once every 24h) If it is connected and I want to sync, it doesn't work, I have to hang up in order to reconnect and sync.
Anyone knows something about this ?
Micman

I guess it depends on the operator. GPRS on my 9100 doesn't want to work with MTS. Megafon SIM card solves the issue.

Don't got that problem, got another problem. How do you disable the gprs connection easy ? any know can't find a way to do it easy.
Right now i need to go to /settings/connections/gprs and start changing the settings and push cancel to disable it.

Try this one: http://www.gb-soft.cz/XDAII/default.htm
Works very well for mine , even under WM5
Need answers , hit me ;-)
Micman

Moonsower said:
I guess it depends on the operator. GPRS on my 9100 doesn't want to work with MTS. Megafon SIM card solves the issue.
Click to expand...
Click to collapse
I have MTS but no problems :wink:

Thanks Micman. Workin great

q-biq said:
Don't got that problem, got another problem. How do you disable the gprs connection easy ? any know can't find a way to do it easy.
Right now i need to go to /settings/connections/gprs and start changing the settings and push cancel to disable it.
Click to expand...
Click to collapse
Just press and hold the red end key for more than 3 seconds and the GPRS-connection is terminated. I have even tried to install GB softtweak wich is able even i WM5.0 to bring the disconnect button to the gprs-bubble and it work.
Powershot-g2

Zamsky
I guess Tver's MTS GPRS differs from Moscow's. I heard they're testing EDGE here. This might be the cause. 9100 hangs on GPRS every time until reset or flight mode on/off.

Yes, the same situation...
In very random moments GPRS hangs ... I'm with Vivatel, Bulgaria...
Have you found solution ?

Micman said:
Try this one: http://www.gb-soft.cz/XDAII/default.htm
Works very well for mine , even under WM5
Click to expand...
Click to collapse
Nice utility thanks

GPRS CONNECTION

Hello everybody.
I have a Qtek S110 and my question has to be with GPRS connection or let say disconnection..
I don´t know how I have to do to stop the GPRS connection. The only way I have found is activating the fly mode, then disactivating it (plus enter pin code, plus...).
Does anybody know the right (and quick) way to do it?
Thanks a lot !! (sure that it´s a very simple question, but after 1 month using it, this is my most important doubt).

simply press and hold the disconnect button for 2 or 3 seconds and that should solve your problem.

Thanks for the reply but this doesn´t do anything.
Any other idea??

I never used the small program by Ampda, but maybe will try it out if and when I need to do a hard reset. I use a small program called GB-Soft Tweak.
check out this thread http://forum.xda-developers.com/viewtopic.php?t=33305.

the trick of holding the disconenct button for 3-5 seconds works, but only from the today screen. and obviously, if there is any program running in the background that uses GPRS (like the blackberry connect i use on my t-mobile uk compact) it will just start up again.

WIFI not active on Tytn !!

Hi,
I have a problem with my Tytn. When I press the WIFI Icon on the Comm Manager appears the Windows ball but the Icon is ticked, and I'm not able to switch on the WIFI module.
Has anyone had the same problem? Really is very annoying because this unit has less than month.
Things that i did without success were: Hard reset, Install WM 6.
I really don't know if can be a registry problem. I noticed that problem after install Hubdog software.
Thanks if somebody can help me.
Next step will be send the unit to the Service Technical Assistance.
Regards

Hi, welcome to XDA Developers. Please take notice of the search function. Meanwhile you can read these threads...
http://forum.xda-developers.com/showthread.php?t=304004
http://forum.xda-developers.com/showthread.php?t=299451

If you have the Touch or Kaiser Comm Manager please use a registry editor for the TyTN and check the following key:
\HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN\DeviceName
mine is:
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1
turning WLAN on/off in the Comm Manager is working for me.

Thanks for your comments.
Finally, I was not able to revieve the Wifi module and I sent my unit to the Technical Service.
I will upgrade with news if I hear something new and unknow.
Regards

JR_de said:
If you have the Touch or Kaiser Comm Manager please use a registry editor for the TyTN and check the following key:
\HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN\DeviceName
mine is:
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1
turning WLAN on/off in the Comm Manager is working for me.
Click to expand...
Click to collapse
Hi,
I have the same problem with the Wlan... I can't activate it...
As you ask, I check this Key, and I have the same ...
If someone has a solution...Thank you !

I upgraded my Jasjam with the original HTC Asia ROM (Doopod).
I too cannot switch on my WiFi anymore. Before the upgrade this was working perfectly.
Regards

Fellas, read the links I posted above.....there is a method there to determine which problem you have and some research on a possible solution...