Hello everybody.
I have a Qtek S110 and my question has to be with GPRS connection or let say disconnection..
I don´t know how I have to do to stop the GPRS connection. The only way I have found is activating the fly mode, then disactivating it (plus enter pin code, plus...).
Does anybody know the right (and quick) way to do it?
Thanks a lot !! (sure that it´s a very simple question, but after 1 month using it, this is my most important doubt).
simply press and hold the disconnect button for 2 or 3 seconds and that should solve your problem.
Thanks for the reply but this doesn´t do anything.
Any other idea??
I never used the small program by Ampda, but maybe will try it out if and when I need to do a hard reset. I use a small program called GB-Soft Tweak.
check out this thread http://forum.xda-developers.com/viewtopic.php?t=33305.
the trick of holding the disconenct button for 3-5 seconds works, but only from the today screen. and obviously, if there is any program running in the background that uses GPRS (like the blackberry connect i use on my t-mobile uk compact) it will just start up again.
Related
I have gotten a XDAII and have it setup and working, however the gprs only connects when needed and won't stay permantley on. Has anyone else found this to be true, or is there a way to make it stay connected?
you have an o2 XDA II or an Imate or a MDA II?
andygee said:
I have gotten a XDAII and have it setup and working, however the gprs only connects when needed and won't stay permantley on. Has anyone else found this to be true, or is there a way to make it stay connected?
Click to expand...
Click to collapse
I dont have any other known answer to that to fix it but there's a program on PocketGear.com called GPRS Keep Alive. $2.45 to buy it and there's a trial too so give it a try.
Her's the link incase you want it:
http://pocketgear.com/software_detail.asp?id=12673
But if you guys have alternate fix let us know, pls.
Here's a solution I've done to my XDA II with T-Mobile GPRS problem. I don't know who came up with this solution, but thanks to my friend who suggested this at PDAMobiz.com.
1. After a hardreset and completing the initial screen alignment, interrupt the auto-installation process by softreset your XDA II (you have 3 seconds before the files in Extended_ROM will automatically install).
2. Make your Extended_ROM viewable, whether by using the Extended ROM Viewer from http://www.ppcw.net or Extended ROM Switcher (sorry I forgot the link).
3. Now, install each cab files, except TMD_AP_NL.sa.CAB. In fact, I also disregarded, Caller ID, and some other TMD stuff.
As a result, the GPRS is now always-on as it should be.
Cheers,
Hi,
I've just upgraded my O2 Xda II mini to the latest ROM (1.11) and found a problem.
Previously, I could end a GPRS session by tapping on the icon at the top and then clicking on the "Disconnect" button in the dialog bubble.
On the latest ROM, the "Disconnect" button has gone from the dialog bubble. It's simply not there any more.
I called the O2 Helpdesk and they have not had any other reports of this, and simply told me to hold the red "end call" button. While this works, it also backs me out of application I have open and active, which is a nuisance.
Does anyone else have this problem?
Yes you are right my MDA Compact came with the latest rom from factory and I was wondering why there is no disconnect button...? now I can see that it's common problem in 1.11 made by some mistake or something.
I guess they remove it because of the "GPRS connection problem" as I used to have problem on GPRS re-connection (after disconnected), however, after upgrade to 1.11, the problem no longer exist !
Thanks for your responses, Shamus and waiting4u.
I posted a message on the Mtek forum in Australia and one user there has the latest ROM and does not have this problem. Maybe it only happens to upgraded minis as opposed to new ones that came with 1.11?
Would really like this back. O2 support was no help and didn't even know it was a problem.
But this is obvious stupidy always on GPRS connection drains battery as a charm, I omitted the problem by installing SPB Gprs Monitor but disconnect shoud be implemented in system. M$ stupidy is enormous :evil:
PeterW mine MDA came with 1.11 it wasn't upgraded!!!
shamus said:
But this is obvious stupidy always on GPRS connection drains battery as a charm, I omitted the problem by installing SPB Gprs Monitor but disconnect shoud be implemented in system. M$ stupidy is enormous :evil:
PeterW mine MDA came with 1.11 it wasn't upgraded!!!
Click to expand...
Click to collapse
Hi Shamus,
In that case, it must be a stupid Microsoft oversight. I checked my colleague's Xda mini this morning - he is still running 1.03 ROM, and he does have the disconnect button. Very frustrating. :evil:
this little fine proggy finally makes me happy
http://www.gb-soft.cz/XDAII/product_gprs_tweak_en.htm
Thanks Shamus! Will give it a try.
PeterW said:
Thanks Shamus! Will give it a try.
Click to expand...
Click to collapse
Yes, it works well and gives me back the Disconnect button. Thanks again.
No problem
Hi all,
i just took my O2 Exec and i have some basic questions that seek for an answer quickly...
I cannot understand whether there is a simlock there or no... i put in there my sim card (Voda UK) and some strange things happen. i sometimes get a UMTS vodafone uk signal and other times a gprs one... Like every five minuits the G turns in to a U and so on.... What do i need to do???is there a simlock and if so how do i unlock?
How do i hard reset my phone and what ROM should i use?
Were can i get the Voda UK settings for mms and gprs?
Is there anything else that i should set in order to have a fully functioning mobile for sms, mms, voice calls?
and a not important one... shouldnt there be the skype software in my phone?
I know that i should search and find what i want but i am in the the midle of an assignment and i do not have the time to do so... Just need to have my phone functioning properly until i have the time to dig out the rest of the things that i want.So just forgive me for asking insted of searching.Wont happen again.
HELP ME
Excuse my bad english...
Thanx all
i put in there my SIM card (Voda UK) and some strange things happen. i sometimes get a UMTS vodafone uk signal and other times a gprs one... Like every five minuits the G turns in to a U and so on.... What do i need to do???is there a SIMlock and if so how do i unlock?
It is just moving between UMTS and GPRS. Mine does it too. If it can't get a good enough signal on UMTS it switches to GPRS. If it sees a better UMTS signal, it switches back.
How do i hard reset my phone and what ROM should i use?
Two soft buttons while pressing stulus reset hole. Nothing wrong with the O2 ROM so stick with that.
Were can i get the Voda UK settings for mms and gprs?
http://www.filesaveas.com/gprs.html
Is there anything else that i should set in order to have a fully functioning mobile for sms, mms, voice calls?
See above
and a not important one... shouldnt there be the skype software in my phone?
Only the JASJAR and MDAPro come with Skype IIRC.
Thank you for the extremely fast and accurate reply.
So there is no problem with the U and G thing. Ok then i will just get used to it. It was that i have never seen the U before.
U means 3G and fast data speeds.
it seems that i cannot manage to do the right settings so that my sms,mmsa dn gprs works. I found the settings but...no combination worked.
Anyway, is there a how to or something that i can check out?
Any other ideas?
Many thanx
ta_ said:
and a not important one... shouldnt there be the skype software in my phone?
Click to expand...
Click to collapse
You can install Skype yourself from the Skype website, but IMHO it's not ready yet. It's very slow and buggy, and the connection quality is questionable.
Wait a month or two until Skype is fully compatible with WM5 and the experience will be much better!
I am getting really confused here......
I managed to fix my gprs 3g settings (following a wm 2003 quide and using the settings from filesaveas) and i can surf the net but i still cannot receive and send any mms.
Any ideas????
HELP!!!
edit: Also is there anybody that has active sync 4.1? i cannot even syncronise my contacts.!
Hi,
I would like to know if anyone else has GPRS problems with the QTEK 9100 ? It hangs up as it wants (once every 10min, once every 24h) If it is connected and I want to sync, it doesn't work, I have to hang up in order to reconnect and sync.
Anyone knows something about this ?
Micman
I guess it depends on the operator. GPRS on my 9100 doesn't want to work with MTS. Megafon SIM card solves the issue.
Don't got that problem, got another problem. How do you disable the gprs connection easy ? any know can't find a way to do it easy.
Right now i need to go to /settings/connections/gprs and start changing the settings and push cancel to disable it.
Try this one: http://www.gb-soft.cz/XDAII/default.htm
Works very well for mine , even under WM5
Need answers , hit me ;-)
Micman
Moonsower said:
I guess it depends on the operator. GPRS on my 9100 doesn't want to work with MTS. Megafon SIM card solves the issue.
Click to expand...
Click to collapse
I have MTS but no problems :wink:
Thanks Micman. Workin great
q-biq said:
Don't got that problem, got another problem. How do you disable the gprs connection easy ? any know can't find a way to do it easy.
Right now i need to go to /settings/connections/gprs and start changing the settings and push cancel to disable it.
Click to expand...
Click to collapse
Just press and hold the red end key for more than 3 seconds and the GPRS-connection is terminated. I have even tried to install GB softtweak wich is able even i WM5.0 to bring the disconnect button to the gprs-bubble and it work.
Powershot-g2
Zamsky
I guess Tver's MTS GPRS differs from Moscow's. I heard they're testing EDGE here. This might be the cause. 9100 hangs on GPRS every time until reset or flight mode on/off.
Yes, the same situation...
In very random moments GPRS hangs ... I'm with Vivatel, Bulgaria...
Have you found solution ?
Micman said:
Try this one: http://www.gb-soft.cz/XDAII/default.htm
Works very well for mine , even under WM5
Click to expand...
Click to collapse
Nice utility thanks
I have an unlocked Cingular 8125 that I am using on TMobile. I can't seem to figure out how to get my Data plan working on it. Can anyone explain what settings I need to change, i.e GPRS and MMS. Thanks.
For GPRS/EDGE setting in T-MO USA do the following:
Press start then go to settings then connections and then connections.
Then add new modem connection
Under select a modem pick cellular line. then click next.
Under phone number insert internet2.voicestream.com
no no no......internet2 will only cause problems later on.....here just do the following....
Hard Reset your device after which before it starts installing all of the cingular customization quickly soft reset (This is where it sayd installing applications in 3...2...1..)
After you soft reset just install the files in the order I have them listed saving the registry cab for the end. Once you have done all this press and hold the power button until it says "data loss can occur...blah blah balh" hit OK and the unit will switch off. When it switches off count 3 and just press the power buton one time to turn the unit back on.
You should be in the clear now.
lvlolvlo said:
no no no......internet2 will only cause problems later on.....here just do the following....
Click to expand...
Click to collapse
What do you mean internet2 will cause problems later on? I used to use internet3 here in New York, then all of a sudden I could not connect to the internet using the GPRS unless I was in say Washington, DC. Upon on reading something in a chatroom regarding various settings, I saw the internet2 specified, and switched the official tmobile cab set network obtained from club imate from internet3 to internet2 and it has worked ever since. But I have noticed when traveling up and down the Eastern Seaboard that I do have to change the setting.
wap.voicestream.com is T-Mobile's main data line....from there you get to hop onto internet2 or internet3. It is best to have it set to wap.voicestream.com as you would benefit from this the most.
The reason why I said it would cause problems later on is that what if T-Mobile changes something or applies some changes (like reserving internet3 only for VPN customers) then you would be effected by this change.....so it's better to leave somethings default but tweak the hell out of the rest of th deivce!
A note about internet3....this is reserved specifically for those indivduals who have added VPN access to their accounts...you know the plan that allows you to use VPN access i think it's an additional 5$-10$ more per month....
you are probably right about the wap.voicestream.com I just posted what works for me. thanks for the cab, i will probably use it after i do a future rom upgrade.
no no no......internet2 will only cause problems later on.....here just do the following....
Hard Reset your device after which before it starts installing all of the cingular customization quickly soft reset (This is where it sayd installing applications in 3...2...1..)
After you soft reset just install the files in the order I have them listed saving the registry cab for the end. Once you have done all this press and hold the power button until it says "data loss can occur...blah blah balh" hit Ok and the unit will switch off. When it switches off count 3 and just press the power buton one time to turn the unit back on.
You should be in the clear now.
Click to expand...
Click to collapse
any specific area i should install this on the phone? folders? thanks.
1. Download the file
2. Unzip the file
3. Right click the folder just before you see the files and make it "Read Only"
4. Transfer to device (I personally like keeping them on a storage card)
5. Open File Explorer and install one by one
a. Tap on file
b. Leave default setting of installing to Device
c. Tap Install
d. Tap OK (top right corner after successful install)
e. Repeat a-e for all cab files
6. Press and hold down power button until data loss message box comes up
7. Tap OK (unit will now power-off)
8. Power unit back on....enjoy life....
Although I must say you should consider flashing your device with the iMate 2.16 ROM....I have it running and I'm loving it! If you don't need it at least consider flashing your device with the original T-Mobile ROM available here. What's the point of doing either...
iMate - Faster, included Java support, AKU2 (MS Security/Push Technology)
T-Mobile Original - Other than physical appearance your device will function just like a stock T-Mobile MDA
i have the latested tmobile rom, can i just flash the iMate 2.16 ROM? what else do i need?
hi, i just updated my o2 mini s to the new rom from o2 uk.. ive been able to conect to tzones before.. now i cant.. PIE will stay at Locating before popping up an error message.. anything i can do to fix it? or get my tzones working again? thank you
the same for Cingular 8525 for t-mobile US
Will the t-mobile file in the previous message install t-mobile settings to work on an unlocked Cingular 8525? If not, does anyone have the settings? I could not get the ones at t-mobiles US or UK site to work. I will be brave and install while in Windows Mobile 5 (against my better judgememt)
Thanks!
FYI:
I did not hard reset it but simply installed the files in the order within the zip. I did get a waring on the registry edits.cab about being designed for an earlier version of windows. Anyway, I did the Power + OK button reset. Upon loggin, the HotSpot Login shows in the Connections and I was successfully able to send a MMS message my gmail account!
Thanks
I'm happy and relieved to say that this still works. I just updated my cingular 8125 with t-mobile service. Thanks lvlol!
lvlolvlo said:
1. Download the file
2. Unzip the file
3. Right click the folder just before you see the files and make it "Read Only"
4. Transfer to device (I personally like keeping them on a storage card)
5. Open File Explorer and install one by one
a. Tap on file
b. Leave default setting of installing to Device
c. Tap Install
d. Tap OK (top right corner after successful install)
e. Repeat a-e for all cab files
6. Press and hold down power button until data loss message box comes up
7. Tap OK (unit will now power-off)
8. Power unit back on....enjoy life....
Although I must say you should consider flashing your device with the iMate 2.16 ROM....I have it running and I'm loving it! If you don't need it at least consider flashing your device with the original T-Mobile ROM available here. What's the point of doing either...
iMate - Faster, included Java support, AKU2 (MS Security/Push Technology)
T-Mobile Original - Other than physical appearance your device will function just like a stock T-Mobile MDA
Click to expand...
Click to collapse
100% Correct use the wap.voicestream.com and follow the instructions above
Thanks lvlolvlo
Hey lvlolvlo thanks for the tmobile file....really helped. I spent a lot of time googling settings with no luck, i tried calling tmobile with no luck....but your post really helped. thanks!
Sorry if this is a horrible question but...
When trying to flash my 8125 I'm receiving an invalid vendor ID message and I'm told the updater can not update my device.
Any help would be awesome.
Thanks :: M
help
ok. ive been reading these posts all week and still need help. i have a 8125. i do not have cingular, i have tmobile. i have unlocked the phone. when i had my tombile phone i paid for pic and vid txts and AIM. i didnt pay for internet. how did i change the settings on my 8125 so i can send and reiceve pic and vid txts. i have tried following almost every step ive read and cant get it working. ive called tmobile and they have sent all types of IP numbers andect. but i have know idea where to input them. every despription isnt how i see it on the phone. someone plz help.
dan wilson
help me too
mrdanboone said:
ok. ive been reading these posts all week and still need help. i have a 8125. i do not have cingular, i have tmobile. i have unlocked the phone. when i had my tombile phone i paid for pic and vid txts and AIM. i didnt pay for internet. how did i change the settings on my 8125 so i can send and reiceve pic and vid txts. i have tried following almost every step ive read and cant get it working. ive called tmobile and they have sent all types of IP numbers andect. but i have know idea where to input them. every despription isnt how i see it on the phone. someone plz help.
dan wilson
Click to expand...
Click to collapse
i have the same problem please help!!
-Bart
Ok, i think im getting this, i also like everyone else here has a 8125 with T-Mobile. But i cant access the itnerent or send MMS.
So dose this mean i have to flash my cell phone with either the iMate or hte toehr MDA rom?
if i do will all hte wifi and all hte drivers work still like bluetooth and such?
t mobile settings
alright everyone, if you have the 5.99 tzones, 1. enter wap.voicestream.com in the apn info, 2. make sure you set the PROXY: 215.155.165.50 port 8080 for http and default ports for the rest, 3. make sure you change the default Internet connection to the one with the proxy under connections/advanced/select networks. and for email with the tzones you have to change the settings for your email to connect with the proxy connection or every time it checks email it'll disconnect and reconnect, and then you'll have to disconnect and reconnect to surf the web.
now for the full internet plan you dont need the proxy, the internet2 and 3 are for the blackberry plan and vpn plan if memory serves me correctly.
Nice thread!
Just used to configure a 8125 that I got of Craigslist yesterday, everything is working now on T-Mobile MMS SMS and internet.