I used the new rom from i-mate JASJAR_WWE_13076_164_10900_wwe_ship, it gave me an error message error 116, i followed instructions to recover, no use, i cannot even hard reset any more (it gives me the white screen, and when i press 0, it just goes back to be switched off).
I am going to put back the previous rom if it works...
anyone had this problem? any suggestion how to solve it?
help much appreciated
Nabil
Can u put back on bootloader menu?
In my upgrade it did the same, but it could go to bootlader... then i tryed to flash it again and it worked ok.
bootloader how?
I only get a white screen when i hard resest with x and 0 option...
how do i get to bootloader?
help much appreciated
Reset (stylus) + Power + Light
A thing like that
Bootloader mode: Hold light and power buttons together and reset with stilus.
i get the usb bootloader message
thanx for the tip...
i get the message on the device upgrading the radio stack, so i have access to the bootlaoder, then i get an error message on the pc side...
so i made progress, but still not working to completion
started working at third attempt
hope it works thanx a million dude u really rock!
steps
Since this helped me, I will write the procedure again here:
You need to have access to the bootloader.
Connect the jasjar to pc usb
Access bootloader
To do that u press together the power button and the light button (light button is 3rd button in the front) and reset button (with stylus), u might need to put stylus in mouth to do that as it is a bit fiddly.
The screen will be dark but if u use flash light on it u can see usb written on the screen
Then start the upgrade from PC, u might need to try all of this a few times, it took me three attempts to get the upgrade started
You will also be able to see the message upgrade in progress on the jasjar screen which will be still dark.
Nabil out
Glad that your universal is up.
:lol:
Related
Ok got my phone doing some funky stuff...
Before I turned off the phone, the phone was default, with extra programs that is all. Basically i was doing my thing, then the phone kept trying to record a new sound file, in the notes section.
I turned off the phone and back on, now the phone starts in the bootloader, 3 color screen.
I can successfully patch ROM files to the phone, but I can't get past the bootloader. I have pulled all the casing off the phone, just to see if anything was holding the buttons in, but no such luck either.
IPL 2.20
SPL 2.20
Loaded on some of your rom's cause it's about time i did this.
I can hold the camera key, and get to the reset factory default, but when i press the green key nothing happens. Anyone got any idea's what is going on
fixed with a hard reset
how to hard reset this model ?
com button, power on +camera ;keep them
how to do this ??? and what - where is the Com button
how to do this ??? and what - where is the Com button ?
what is ???
please reply to this email [email protected]
Hi: This is my first posting and I am new on this board. I have had an MDA that I got as a gift from my Dad and I love it. However, I used it last week and for some unkown reason, it is stuck in the:
'Press Send to Restore Factory Defaults, Other Key to Quit.'
I have been trying to get past this for 4 days and am not having any luck.
I got to the Align Screen and that happened only once. Then I could not get past that. It keep showing the Align Screen and I kept tapping and it just kept going round and round from the Center Tap to the sides and back.
My battery is fully charged, I have read this forum and still I am lost. I would really appreciate any help. Thank you so much.
Toni
Do a Soft Reset or Hard Reset.
Cheers!
zabardast_1 said:
Do a Soft Reset or Hard Reset. Cheers!
Click to expand...
Click to collapse
Thank you for trying to help me. However, I have done both of the resets over and over and I keep getting the same result. 'Press send to restore factory defaults, other key to quit.'
I can get no further than that display regardless of what key or keys that I hit.
I have even tried the two ways of doing a Hard Reset:
1. Hold Com and Voice while pressing Soft Reset Button for 5 or more seconds until I get that display.
2. Hold Com, Voice and Camera while pressing Soft Reset Button for 5 or more seconds until I get that display.
I cannot get past that display regardless of what key or keys I press.
It seems frozen at that display point.
Tried again this am to hard reset my MDA. Now it goes and shows the T-Mobile screen with the IPL/SPL etc. Then goes into Windows and to the Align Screen and for some reason will not recognize the Screen Tapping to align the screen.
I did try to use my PC to recognize the MDA, but it would not. Downloaded WST and that would not recognize my MDA either. I understand that until I get past the Hard Rest my MDA will not be recognized by my PC due to ActiveSync being requried to connect my MDA to the PC. I don't know what else I can try. Search all day yesterday and could not find any solutions. Will continue today. Any suggestions, Please. Thank you.
Tonis said:
Tried again this am to hard reset my MDA. Now it goes and shows the T-Mobile screen with the IPL/SPL etc. Then goes into Windows and to the Align Screen and for some reason will not recognize the Screen Tapping to align the screen.
I did try to use my PC to recognize the MDA, but it would not. Downloaded WST and that would not recognize my MDA either. I understand that until I get past the Hard Rest my MDA will not be recognized by my PC due to ActiveSync being requried to connect my MDA to the PC. I don't know what else I can try. Search all day yesterday and could not find any solutions. Will continue today. Any suggestions, Please. Thank you.
Click to expand...
Click to collapse
Use the love rom to set phone back to "zero". Therefore you must press press the voice and camera buttons if joy reset youre phone.
You get some collored bloks om youre phone and then you can use the love rom.
After that you can use youre original rom updater
sleurhut said:
Use the love rom to set phone back to "zero". Therefore you must press press the voice and camera buttons if joy reset youre phone.
You get some collored bloks om youre phone and then you can use the love rom.
After that you can use youre original rom updater
Click to expand...
Click to collapse
Did a search for Love Rom and Wizard_Love ROM and only came up with 103 results consisting of some Threads with 1570, 898, 618,787, 893, 464........postings on the first page for Threads 1-25.
Now I do have a Red, Green, Blue, White Screen with RUU in the top right corner of the Red Bar with IPL 2.26 and SPL 2.26 in the Red Bar. Nothing is in the Green, Blue or White bar.
I tried to Hard Reset and Soft Rest and nothing happens. I removed my Battery and then tried again and still nothing happens?
Where can I find Wizard_Love ROM and what do I do when I find it. My PC will not recognize my MDA and I used WST and that cannot located my MDA.
I am at a complete loss of what to do next.
Thank you in advance for taking the time to try to help me get my phone operational.
sleurhut
Use the love rom to set phone back to "zero".
do not confuse guys with this statement.Wizard_love_Rom is a patched rom which is flashed to recover back the phone in some stuck up phones,but it doesn't set the phone back to 'ZERO',but its an italian language rom.
Tonis
The multicolor screen is the bootloaders with IPL/SPL 2.26 displayed,this is the mode from where you can flash another rom.There's no need to get the phone activesync,cuz it won't activesync in bootloaders.But when in bootloaders,connect the phone with pc via usb cable and watch small usb appear at the bottom of the bootloaders,if its there then you are good to go and can flash a rom.
Now,download the official T-mobile 2.26 from the link below and get the phone in bootloaders,check usb appear at the bottom and flash it to recover back to the default status of the phone.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
zabardast_1 said:
sleurhut
Use the love rom to set phone back to "zero".
do not confuse guys with this statement.Wizard_love_Rom is a patched rom which is flashed to recover back the phone in some stuck up phones,but it doesn't set the phone back to 'ZERO',but its an italian language rom.
Tonis
The multicolor screen is the bootloaders with IPL/SPL 2.26 displayed,this is the mode from where you can flash another rom.There's no need to get the phone activesync,cuz it won't activesync in bootloaders.But when in bootloaders,connect the phone with pc via usb cable and watch small usb appear at the bottom of the bootloaders,if its there then you are good to go and can flash a rom.
Now,download the official T-mobile 2.26 from the link below and get the phone in bootloaders,check usb appear at the bottom and flash it to recover back to the default status of the phone.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
Click to expand...
Click to collapse
Thank you again for your help. Prior to this posting I found:
epimazzo Posting at: http://forum.xda-developers.com/showthread.php?t=294107&highlight=bootloader #1 and this is what cleared up my problem and now my MDA is running GREAT!!!!!!!!
This was the same thing that you posted for me, too.
Maybe some of you are already aware of this procedure, maybe not.
Anyway, it worked for me and I decided to share how to do it. Simple.
This procedure should only be used in case you really need enter into a bootloader mode (Red, Green, Blue, White Screen) and all other ways to do it has failed! Hold Camera button is one of these I am mentioning.
1. Make sure your Phone is not Connected to the PC and remove the dummy card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your Phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t use the IrDA or Bluetooth for the Upgrade)
4. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
So, Thank you all for your time and help. I do hope this helps others to find a way to correct their problems.
Thanks !
Yes.thats exactly what I wanted you to do
I'm glad you got it up and running fine
Cheers!
zabardast_1 said:
sleurhut
Use the love rom to set phone back to "zero".
do not confuse guys with this statement.Wizard_love_Rom is a patched rom which is flashed to recover back the phone in some stuck up phones,but it doesn't set the phone back to 'ZERO',but its an italian language rom.
Tonis
The multicolor screen is the bootloaders with IPL/SPL 2.26 displayed,this is the mode from where you can flash another rom.There's no need to get the phone activesync,cuz it won't activesync in bootloaders.But when in bootloaders,connect the phone with pc via usb cable and watch small usb appear at the bottom of the bootloaders,if its there then you are good to go and can flash a rom.
Now,download the official T-mobile 2.26 from the link below and get the phone in bootloaders,check usb appear at the bottom and flash it to recover back to the default status of the phone.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
Click to expand...
Click to collapse
I does everything you do but
I don't have the cradle :S
so that means a problem?
or there a nother way?
Hi!
I got an mada vario 4. How can I upgrade the rom on it? Or can I change the t-mobile touch flo to manila 2.5? Thx! Zoli
with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote
muslim2009 said:
with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote
Click to expand...
Click to collapse
Hi
Sorry to hear your problem, try to read this guide http://forum.xda-developers.com/showthread.php?t=406721 and the stickies in the Elf Upgrading
Hope you can save your device
i have read it but i dont find the sollution :=(
can you help me plz ????
muslim2009 said:
i have read it but i dont find the sollution :=(
can you help me plz ????
Click to expand...
Click to collapse
Hi
Does it go into bootloader (3 colors )?
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(
nothing again
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco
muslim2009 said:
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco
Click to expand...
Click to collapse
Hi muslim2009
I tried a few searches but all the results say you need the bootloader screen , are you sure you didn't miss a step in hard reset or bootloader mode :
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
I sincerely hope it helps
I was also born in Morrocco at Casablanca and lived there until age 16. Anyway I'll continue searching.
Tito
thanks for help,but it won't work :=(..
[email protected]
add me if i can show you my htc ..
thanks from morocco
I'm not sure if it's possible with the HTC Touch, but I know when I was playing around with an old iMate SP3i (smartphone) I was able to do a ROM upgrade from files on the memory card.. Took me a few attempts to get it right, but it worked. I think I also upgrade my SP5 to WM6 from WM5 that way, but I'm not too sure about that.
Either way, a basic idea of what I'm talking about can be found here, but that is obviously for a different phone.. Maybe some of the more common members here would have better luck finding a similar process on a Touch....?
maybe its will be workin but what marterial i will need for this opperation??
On some HTC devices (cheetah, for example) if you put the ROM file (.bin) in the root directory of the SD card, the phone will flash directly from the SD card.
I think you do require to put the phone into bootloader for that to work though ... not 100% sure, but probably worth looking up.
Ok... Been trying to search for more information for you, but with not really knowing all the correct terminology it's taken me a while longer than I thought. I've found two threads that have some of the information I was looking for:
Recover / Revive your dead / bricked HTC ELF or ELFIN
Recover HTC Touch from tricolors RUU boot-loader (Mtty)
The second link is actually found inside the 2nd post (I think) of the first thread I mentioned here, looks like they are linked in some way. Your best bet is to read through and see if it is something that may help. Let us know if this works for you...?
thanks you man,i was read the first link befor..i will see for the second
hope will work.thank you again
My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
I have tried to connect using MTTY also but it is not detected using usb. help less now with no bootloader.
pravin.kamdi said:
My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
I have tried to connect using MTTY also but it is not detected using usb. help less now with no bootloader.
Click to expand...
Click to collapse
don't panic
to enter boot loader just on device
press and hold camera button and press soft reset button .
deepv84 said:
don't panic
to enter boot loader just on device
press and hold camera button and press soft reset button .
Click to expand...
Click to collapse
No luck. I have tried to go to bootloader using press and hold camera button and press soft reset button
pravin.kamdi said:
No luck. I have tried to go to bootloader using press and hold camera button and press soft reset button
Click to expand...
Click to collapse
remove battery and then hold power button for 20 seconds (this will remove stored power from device )
then insert battery
press and hold camera button then press power to bootloader
hope this will work
Pravin,
What happened??
Did it work?
no bro i have tried power cycling also nothing is working.
ok dude did it worked?
if not tell me i'll help you via team vewer to unbrick it
dont worry just dont panic i've unbricked mine too
what happen
hey bro ,,
what happen, r u able u restore u r set...... if not tell us ...
bye
My Gene also dead
Please help me,,
i try to update rom but it fail,
now when i start my gene it show color screen...
please help me what i do
my yahoo chat id [email protected]
added you on yahoo
hey amit ,,
can u explain more in detail what u do exactly with u r handset..
.......
When i try to update my rom, i don`t know what happan but now, my phone not start when i try to start only blue and red light flash. nothing.
when i press reset with camera button i saw three color screen.
Tell me what i do..............
hello gurusingh,
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
hi gurusinghbrar,
My Htc p3400, can not start......
i was updating this rom "RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship" after 100% complete it turns off , but not start only Green and red light flash during press reset button...
i was try all methods,#remove batery 20 sec and then start with camer button & both camera and voice button. but result is same...
#No indication during Charging.,no usb detected in PC.
please help how i can recover my device.....
sanmukh singh
[email protected]
HTC P3400i GENE100 Dead
I have a HTC P3400i GENE100. I successfully installed orefkov SPL and then upgraded my original ROM WM 6.0 to cooked wm 6.5. After installation my device was too slow than before hence I flashed it with RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe. After flashing it 100 % my New Gene restarted, but didnt boot to booting screen. Its not going into bootloader mode also. It shows blank screen i.e. black. I tried several combinations of keys (Camera + Power button or Camera + Reset or by pressing both "-" button + Reset) for going it to bootloader mode. But none of them working. When I plug in charger the green & red light blinks once and nothing else. Same if I press reset with stylus, the green & red light blinks once and nothing else happens. I know that I have bricked my New Gene, when I flashed the ROM, which was meant for Old Gene, which I came to know after reading the posts in this forum. I have to use JTAG Method for recovering my Gene. Hence I have read many posts about it in this forum. But can any one of the great masters here, help me with a proper guide that can help me recover my Gene 100%.
Thank you for spending your valuable time in reading this post.
Regards
Parag Gawali
prgawali said:
I have a HTC P3400i GENE100. I successfully installed orefkov SPL and then upgraded my original ROM WM 6.0 to cooked wm 6.5. After installation my device was too slow than before hence I flashed it with RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe. After flashing it 100 % my New Gene restarted, but didnt boot to booting screen. Its not going into bootloader mode also. It shows blank screen i.e. black. I tried several combinations of keys (Camera + Power button or Camera + Reset or by pressing both "-" button + Reset) for going it to bootloader mode. But none of them working. When I plug in charger the green & red light blinks once and nothing else. Same if I press reset with stylus, the green & red light blinks once and nothing else happens. I know that I have bricked my New Gene, when I flashed the ROM, which was meant for Old Gene, which I came to know after reading the posts in this forum. I have to use JTAG Method for recovering my Gene. Hence I have read many posts about it in this forum. But can any one of the great masters here, help me with a proper guide that can help me recover my Gene 100%.
Thank you for spending your valuable time in reading this post.
Regards
Parag Gawali
Click to expand...
Click to collapse
check ur mail
Gene back to life
Thanks to Sumeet...
I got my HTC P-3400i New Gene back to life. It works better too. Sumeet is the man, who has given life to my entirely dead gene. I thank to him and suggest needy to contact him in their cases.
Thanks to XDA-developers Forum too...
Regards
Parag Gawali
same problem i had pls help me
Fido/Sumeet, please help me my gene got bricked when i was downgrading my gene from 6.1 to stock rom. after successful rom update my gene doesnt got restarted i'm getting black blank screen.
pleaseeeeeeeeeeee guys help me.....
hi, i am in need of som serios help, im a total noob n i flashed my first ROM with Duttys_Leo_Sense_2.5_5.21905.5.0.93_2.13_Radio_2.10.50.26_HG_V3.4.exe
i then last night decided i wanted to switch over to Miri_Steve0007_Elegancia_V8.5
and now the phone will not reset and has a million crashes! iv been trying to go back to the Dutty ROM bt it dosnt let me. can som1 upload what it is that i need to get the dutty rom bak. thank u in advance
when you say crashing, can you give a bit more info? is it locking on a cirtain screen? or in a constant reboot?
you may want to also read through a few of the stickys as if you use the search you most likley will find the cause.
RE: HELP!
More info would be appreciated but I've had issues before and did this:
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
From that my phone turned on and I was able to create an activesync connection again to flash another ROM.
__________________
Blog: jonathanstowell.com
Rasheduddin said:
hi, i am in need of som serios help, im a total noob n i flashed my first ROM with Duttys_Leo_Sense_2.5_5.21905.5.0.93_2.13_Radio_2.10.50.26_HG_V3.4.exe
i then last night decided i wanted to switch over to Miri_Steve0007_Elegancia_V8.5
and now the phone will not reset and has a million crashes! iv been trying to go back to the Dutty ROM bt it dosnt let me. can som1 upload what it is that i need to get the dutty rom bak. thank u in advance
Click to expand...
Click to collapse
I flashed many roms and never experience like that as long as you do it as per instruction/ guide in the relevant ROM.
I would suggest you to go into bootloader screen (turn of you phone, then press vol up and down together with the power on button).
Install HSPL (only if you havent installed it), perform task 29, flash the radio (check the radio version required by the ROM), and flash the ROM you want.
Everytime the process reach 100%, you press the vol down button to go into bootloader screen so you dont need to pull out the battery or the cable (but for the last process (flashing the rom), you should press vol down and up together (it will go to hard reset). And for better result, please make sure your battery above 50% and use win xp.
Hope you can solve it.