Related
Hi I recently got a S110 since using it (very basic usage) I have encountered some problems can anyone help?
1.When I plug the mains charger into the S110 and it begins to charge the backlight does not work when I try to turn it on it does turn on as I can see the today screen very dimmly I then have (struggle) to go to the settings/backlight and tick and untick the check boxes there to bring the backlight on. I have to do this every time the charger is plugged in and I want the backlight on.
2. My Phone does not switch off even when I hold in the power button for 2 seconds as the manual says.
3. I am unable to start a new message or create a new contact from the today screen it makes the noise but the application does not open
4. When somebody phones me they hear it ringing in their ear for 20 rings and it only rings so that I may hear it for 8 rings
5. I am unable to use transcriber when writing text messages I write on the screen it beeps as though it has been recognised but does not write the printed text to the screen.
Please can anyone help
Problems Q110
Just received mine this am, generally happy with it although I will look at the problems you listed. I have discovered that it can't be turned off as well as you!
Will post more when I have had a chance to experiment.
S
@Duncan.M
the 2 second power hold to turn off the phone is an error in the manual.
holding the power button actually switchs the backlight off/on. which could help with your backlight issue.
can you actually use contacts and messaging at all? can you use the HW buttons to open either function? from your problems it sounds abit like not all the default software was installed the first time you turned your pda on.. well except for the ringling issue, i havent heard of that problem before.
SpeedN
@SppedN
My first question would then be. If I want to how do I switch my phone off if it is not holding the top right hw button for two seconds?
In response to your questions after taking two minutes to rtfm a soft reset fixed my inability to create a new txt message or new contact from the today screen & the issue with the backlight not working whilst connected to mains power
HOWEVER THE SOFT RESET HAS NOT FIXED.....
Problem 4 & Problem 5. (please see original thread subject)
@HeronLen OR Anyone else who has the CD Ver.A 06.2005
I would like to try a hard reset to see if that fixes the problems that still exist with my S110 except MY CD player on my PC will not read the CD that came with the phone would you be able to make a copy of your CD and if you have broadband upload it to an FTP/WEB SITE for me or if not even post a copy to me.
Heelo Duncan! I don't understand problem 4.
Do you mean, that when you make a phone call, your device rings x times, but the person you call's device actually rings y times?
I'd try a Hard reset to fix problem 4... it could be telco related delay possibly i guess. you dont actually need to have your pda attached to your pc to perform a hard reset. all the default software for you pda is stored on your pda in the extended rom. so a hardreset wipes the memory and begins a clean install.
for problem 5 can draw in notes with the transcriber? eg even simple straight lines? if transciber doesnt recognise your handwriting it can take a long time or even not display your writing.
oh and to turn the phone off you tap the reception icon in the middle of the start bar and turn on flight mode.
SpeedN
@helterskelter
Hi no I mean the other way around. When somebody calls me the phone rings in their ear 20 times yet it is only audible to me for 8 rings, which means that a) I have to have voicemail turned off otherwise voicemail picks it up after I have heard it ring only twice or b) with voicemail turned off I have to hope that the person calling is persistent (wait for a lot of rings in their ear) for me to get to the phone and pick it up.
I think it is a telco problem as speedn suggests that combined with slow software of the phone function of the S110.
Any suggestions are still welcome - How does everybody elses phone react?
@speedn
Problem 4. I know that I do not need to have my pda connected to my pc to do a hard reset though I would like to make a backup of my appointments etc onto pc before I do the hard reset this I cannot do without having a sd card (which I do not) or connection to my pc
Problem 5. I can draw in notes using transcriber but as theyre supposed to they stay in my handwriting (I think thats supposed to happen) The problem is that transcriber does not convert my handwriting into typed text. I have configured transcriber start>settings>input and it still doesnt work. I have also gone into word with transcriber as my preffered input method clicked on the letter shapes button selected the way that i write my letters and numbers and it still doesnt work, I write on the screen example, A (UP STROKE, DOWN STROKE, ACROSS STROKE) S110 BEEPS but the letter A is not typed on the screen it is stiil displayed in my handwriting. I really need to try a hard reset.
you can set your divert no answer to 30 seconds via your telco or in the settings>phone call forwarding section. and you can download activesync 3.8 from microsoft website. you can also backup appointments and contacts etc using permanent save in settings>system or xbackup to storage..just the appointments and contacts, a whole backu wont fit.
SpeedN
@speedn
Thanks for the flight mode answer.
We must be insync ourselves I was just reading about permanent save in the user manual. Ill try that
I ve also decided Im gonna go over to my mums house and put the cd in her laptop/share her cd drive and usinq wifi copy the entire contents of the cd onto my hard drive and try the install from hdd.
Ill let you know the results
Thanks for your help
Q110
I am not sure how I can contribute further, it would be good to get a fix for the off thing. I am not sure if many airlines will be happy with 'its off but not really' argument! Having interesting problems configuring gprs, why do MS make it so hard!
S
Re: Q110
heronlen said:
I am not sure how I can contribute further, it would be good to get a fix for the off thing. I am not sure if many airlines will be happy with 'its off but not really' argument! Having interesting problems configuring gprs, why do MS make it so hard!
S
Click to expand...
Click to collapse
actually funny you should mention that, i was flying interstate here the other day, and i noticed a new comment from the flight stewards. it was about devices that use flight mode...please make sure flight mode is on.
flight mode switchs off all the gsm radio its the same as switching off your mobile phone. mind you there was also a major Imate Jam advertising campaign throughout the whole airport, 2 metre tall Jams everywhere.
Speedn
I decided to see if I had any of the problems you listed. It turns out I had #5. I opened a note, selected Transcriber and tried to write something. It beeped like it recognized it but no text showed up. I then did the following:
1) reselected Transcriber as my input method
2) Selected Letter Shape Selector (didn't change anything here)
3) tapped OK
4) Selected each of the menu options at the bottom (just to see what they were)
5) After opening and closing each one, it started working
It seems there may be a software bug in this version of transcriber that causes it to not work unless a certain variable is initialized (by going to each, or one specific menu item first). FWIW, it worked form me.
@roblyman
no that didnt work for me.
Looking at an MDA Vario, on the homescreen you can "lock" the device.
I'd like to be able to PIN Lock my device by pressing a key, like I used to my C500 - or a button on the homescreen would be even better. The C500, just pressed the power button and chose "Device Lock" - nice and easy way of securing the phone, preventing anyone from using it.
Whilst I've got the timeout set on my MDA Pro, it doesn't always seem to kick in, and I'd like to be able to lock it manually, but can't find the way...
Can you help?
I agree...
The Qtek 9100 has this nice function as well. Why can't we use it in Universal as well?
set the time to 0 minutes, and then simply switch the device off. This will lock it.
lbendlin said:
set the time to 0 minutes, and then simply switch the device off. This will lock it.
Click to expand...
Click to collapse
I think the point is, we want to have the "OFF and LOCK NOW" option to click whenever we feel like it, without the inconvenience of having it lock every single time we turn it off.
I see. Looks like a simple program would do that registers for a wakeup event, sends the unit to sleep and then blocks the device until a PIN is entered. However, that can be circumvented easily by a more sophisticated user...
What if a user of a Qtek 9100 (Wizard) could take the Lock Device.exe they have in their ROM's and give it to us???
Wouldn't that solve the problem? :?:
well, let's try !
Anyone??? All we need is the Device Lock.exe I believe from a Wizard...
There is no such file in the Wizards ROM. many have been looking for it, because we want to bind it to a hardware button and remove it from the Today screen. However, none of us have been able to find it. Posting it to you is therefore not possible, sorry.
Koksie said:
There is no such file in the Wizards ROM. many have been looking for it, because we want to bind it to a hardware button and remove it from the Today screen. However, none of us have been able to find it. Posting it to you is therefore not possible, sorry.
Click to expand...
Click to collapse
I didn't know that my friend... That's unfortunate...
Thank you for your reply though
I don't even want to bind to hardware - just the software would be good for now!
I installed the latest UK TMobile Rom, and the lock device today plugin or something like that suddenly appeared... and works perfectly
So I have been looking around the internet and on this site, and I found a few programs that lock the phone including the two programs created by vijay555 and armstrom but they just don't do what I am looking for. This is what I am looking for:
1) When I press the power button I want my phone go into sleep mode and lock
2a) When I press the power button again I want it to turn the screen back on and advance me to the screen where i just press unlock on the touch screen( not unlock on the soft keys and then to unlock on the touch screen. I would like to skip the soft key press.)
2b) Instead of the need to press the touch screen to unlock it would be great if when I hit the power key to turn back on that it allowed me to press the middle nav button(such as the lock on the palm 700 wm)
Hope someone can help! Thanks alot! I have a Cingular 8525!
well now once you hit the power button to sleep it will only leave the power button active, so you dont have to lock it before you put it to sleep.. also the latest version of battery status has an option that will lock the phone upon wake up.. now i know you are looking for something to lock it prior to sleep and unlock during wake up, but personally i think unlocking during wake up could cause issues if the phone is on your pocket.. you can also still answer calls while the phone is locked
VJDeviceLock locks on power off if required. Advancing to second stage could be done. Making device unlock on pressing enter is possible but semi-complex. I don't know if Matt is still developing, but I could update mine if required.... I'm very busy and pre-occupied, but if enough call for it I'll give it a go.
V
that would be amazing if you could look into it. I would really appreciate it!
hi, vijay555. does your device lock affect activesync synchronization? the one i tried always give out an error message, so i had to remove the program.
Don't know if it does. If it does anything at all, it should do the same as the normal device lock today screen plugin. Let me know if it does something else.
V
i have yet to find a device lock that kills activestink on the phone
shogunmark said:
i have yet to find a device lock that kills activestink on the phone
Click to expand...
Click to collapse
this one (included in the addon folder), when installed and set up, disrupts synchronization on my phone (xda2s on helmi's 3.2 rom). but i can still explore the phone via activesync.
i will try vijay555's program. thanks.
raymonds said:
this one (included in the addon folder), when installed and set up, disrupts synchronization on my phone (xda2s on helmi's 3.2 rom). but i can still explore the phone via activesync.
i will try vijay555's program. thanks.
Click to expand...
Click to collapse
ok, you are referring to the AS on the pc getting disabled... or let me state that better, when you use that app to lock your phone it halts synch between pc and phone.. thats odd.. i will pull apart that cab and see whats up with it, however im not well versed on versions earlier than WM5.. but in theory it should work the same way.. i will report back
**EDIT**
wait, im an idiot, i dont need to pull it apart to answer your question, dont know why i didnt think of this earlier, when you put your device to sleep it should kill the connection over usb (why your able to browse via AS is still beyond me). i have experienced that on all the WM5 devices i have owned farrady, wizard, hermes...
**2nd EDIT**
That cab is doing exactly that, when you activate the device lock it puts the phone into sleep mode via reg key HKLM/Software/Devicelock and the dword "SuspendAfterCheck". now with that being said there may be a reg key to also disable power save modem on the active sync connection, but im not sure if it exists for earlier versions of WM
thanks, shogunmark. btw, my unit is already on WM5... and i got lost on the 2nd EDIT, lol!
raymonds said:
thanks, shogunmark. btw, my unit is already on WM5... and i got lost on the 2nd EDIT, lol!
Click to expand...
Click to collapse
oh, i thought your particular device was wm2003 device, my bad.. that 2nd edit showed a registry setting that suspends the phone when using that app, if you have regedit you can try to play with that setting and see what happens, the HKLM is HK local machine key in the registry.. its currently at a value of 0. from this app, you could try changing it to a 1. but then again that program may overwrite that value each time its ran, but i dont think so, its worth a shot
okay so now that i have played with my phone for a couple of days i know exactly what i want now. I would really like a program that would lock my phone and then shut it off with just the simple press of the power key on the side. I have used both the programs for vijay and the other device lock and they both will lock after device awakens, but I would really like it to lock before then. If that could be possible, i could then use the device lock program to run a program when the phone wakes, i will run vijays button press to press the left soft key and then all i will have to do is press the screen to unlock, thus exactly what i need is taken care of. Hopefully everything is understadable. I am super tired right now, but i have been testing all day and wanted to update the post.
@lance18: i'm not sure if i read correctly, but maybe you could opt to have your unit power off after a certain amount of time, without using the power button
start>settings>settings>power>advanced
@shogunmark: thanks for the idea. i just realized i could have one program run after locking my unit, so i chose activesync. i now have
no more problems synchronizing
My MDA IS GOING CRAZY!! Every time I press the power button to take the phone off of the standby mode the phone seems to randomly just open up contacts and then try to delete one of the ones that are first on the list. Also the two soft buttons aren't working. the keyboard, some of the letters aren't working either, and every time i press the left softkey on the keyboard the menu on the right always opens up when I am on the internet. For some reason it just started acting like that when I increased the size of the cache. This one time all the keys worked for like 5 minutes the other day, then they went back to not working. I already did a virus scan and nothing came up, so yea. I am willing to pay if needed to the person through paypal, whoever helps me fix up my mda. NEED HELP!!!!
Have you tried updating to a newer firmware?
Are there any magnets in the immediate vicinity of the MDA?
I know it sounds crazy but even the magnet on the included t-mobile case can do things like switch the screen to landscape or bring up the calender.
It's just a thought and a possibility.
nope no magnets, and the rom is the 2.6 one, the newest rom, dunno what wrong with the phone, im willing to pay to fix it up. whoever helps me fix it up, i will pay them.
if i were you, (thankfully i'm not because i have had enough problems with my XDA!! lol) i'd do a hard reset, but i'll assume you can't do that because of the mind of its own issue, so power down the phone, and leave it on charge so there's atleast 50% battery in the phone. meanwhile, goto the t-mobile website and get the latest rom (or re downlownload the rom that's already installed...2.6 i think u said?) and try to upgrade using bootloader. todo this, hold the camera and the power buttons until a funny screen comes up, run the update utility, and then plug in the phone to the firewire cable (then onto the usb) on the first screen of the program (if that makes sense). then run the update utility and that should work.
there's no reason why it shouldn't. i had a similar problem with a se w800i about a year ago, and it turned out a button was stuck down, so check that.
i hope you get it sorted, as i kno how frustrating these phones can be.
thepolice
thizzmaster said:
My MDA IS GOING CRAZY!! Every time I press the power button to take the phone off of the standby mode the phone seems to randomly just open up contacts and then try to delete one of the ones that are first on the list. Also the two soft buttons aren't working. the keyboard, some of the letters aren't working either, and every time i press the left softkey on the keyboard the menu on the right always opens up when I am on the internet. For some reason it just started acting like that when I increased the size of the cache. This one time all the keys worked for like 5 minutes the other day, then they went back to not working. I already did a virus scan and nothing came up, so yea. I am willing to pay if needed to the person through paypal, whoever helps me fix up my mda. NEED HELP!!!!
Click to expand...
Click to collapse
Ok, you need to give more info. What IPL/SPL, Radio, version, etc. etc. What other steps did you follow? Downgrade to 1.08 unlock? CID unlock? Upgrade to 2.26? Then flash whatever ROM you are using...and which ROM is it? What other apps have you loaded? How old is the phone? Who is your service provider? What is your bank account number? (ok maybe we don't need that one haha) What SD card are you using? Have you dropped the phone?
--M
uuh, i haven't dropped the phone at all. Its unlocked, and I changed the network settings so that I get unlimited internet and other data transfers for free. I have Tmobile prepaid. Other than that I am going to try to hardware reset it, tried it already, it didn't work. So, I will try to update the rom, the phone is unlocked, so if I update the rom hopefully it wont become locked again.
It won't become locked again, it sounds like a hardware problem it is most likely a button or key on the keyboard is getting stuck and/or shorting every so often causing this behaviour.
Have you recently loaded any apps? Maybe changed the key settings? Deleted a file by mistake?
How large did you make the cache? What program did you use to change the cache? Did you change anything else besides the cache?
uuh i made the cache to 4 MB and I did change the settings for the IE but I changed them back, I used Resco Registry Editor, also I went to this website to find the registry tweaks http://www.pocketpctweaks.com/pocketpc_tweaks/
Then I went to the 2 performace tweaks:
http://www.pocketpctweaks.com/pocketpc_tweaks/speed_up_your_pocketpc
http://www.pocketpctweaks.com/pocketpc_tweaks/increase_performance_speed
I also did this one on the IE using Resco Registry Editor:
http://www.pocketpctweaks.com/pocketpc_tweaks/change_pocket_internet_explorer_6
Other than that I haven't done any other ones, I tried overclocking by using a software called Omap Clock, but that software sucked, it would be overclocked for a while, and it would return back to the default speed whenever I would press the power button to put it on standby.
if i were you..
if you are willing to pay for those who ever fix you phone, i'd rather pay my nearest service center to fix my device.
Here is a tiny program to soft-reset your phone without having to take the back cover off the phone. You access the program from the programs menu (Start--Programs).
http://www.clickapps.com/moreinfo.htm?pid=19165§ion=PPC
@Beards: I added it to the wiki list, but for some reason the table structure of the item following is messed up (the version appears in the comments cell). It was my first time editing the wiki, so let me know if I did something wrong.
Chris Cross said:
Here is a tiny program to soft-reset your phone without having to take the back cover off the phone. You access the program from the programs menu (Start--Programs).
http://www.clickapps.com/moreinfo.htm?pid=19165§ion=PPC
@Beards: I added it to the wiki list, but for some reason the table structure of the item following is messed up (the version appears in the comments cell). It was my first time editing the wiki, so let me know if I did something wrong.
Click to expand...
Click to collapse
The thread http://forum.xda-developers.com/showthread.php?t=450643
has a soft reset app i wrapped. It has no prompts, and just F.D.I
I have to say this does exactly what we need, no fuss, it just works.
Thanks.
Power button will do also
If the unit has not frozen completely, you can long press the power button and get the dialog box asking about losing data and asking Yes or No to continue.
This is actually the first time I have ever seen a built-in option of actually shutting the entire unit completely off! Just like removing the battery!
I tried this method a few times when it looked like the whole thing locked up (experimenting with old/incompatible apps) and it worked like a charm. I have had to remove the back cover only once to use the reset button.
Regards,
Gordo
Yes, this is the method I use and it is very convenient. Even when my screen freeze or the unit seems to hang, holding the button will still allow me to shut down. Hold again to restart.
http://forum.xda-developers.com/showthread.php?p=3034819#post3034819