Hi. This has worked for me, and solved a massive problem. Hope it helps someone else too.
Step 1:
Ensure you are trying to fix the same problem as I was by looking at the symptoms, which were:
- HTC Wizard synchronizes OK when you plug it in the first time
- It stays in sync if you leave it plugged in
- If you unplug it and then plug it back in at any time later, XDA goes s-l-o-o-o-w and then freezes and will NOT re-sync
- If you unplug it and soft reset before reconnecting then it's fine
Essentially, the Wizard was requiring a soft reset between every connection to the USB cable, or it would crash and require a reset anyway!
These issues have been discussed in about 10 threads on this board, and on pretty much every other resource for Wizards and Pocket PC devices on the net. I was, however, totally unable to find something like this which directly addressed the problem.
Step 2:
Download a program called Dr. TCP from here: http://www.dslreports.com/drtcp
Run it to open a dialog box with loads of fields with strange techy names... no, i didn't understand it either. However, I've been searching the net for days and I found an article here: http://www.pcworld.idg.com.au/index.php/id;504222574;fp;2;fpid;1277378924 which told me how to work the numbers out...
In the bottom drop-down box, select "Windows Mobile-based Device" and enter 1492 in the box next to that. That's your maximum "MTU".
Here are the settings which work for me (from the top). If i don't mention a setting, I didn't change it!
Tcp Recieve Window: 261360
Dial Up (RAS) MTU: 1492
Path MTU Discovery: Yes
Save and Exit Dr. Tcp.
Step 3:
You need to open "Network Connections"... in XP, that's Start > Connect To > Show All Connections. I'm sure you can find it yourself. Anyway there should be an icon called "Local Area Connection (x)" with "Wireless Mobile-based Device" written in grey underneath.
Right click on that and select DISABLE. This will close your USB connection to your Wizard so those MTU settings can be applied.
Now unplug your Wizard from its cable. Here, I tried right clicking on the connection and selecting "Enable", but it just errored. So you need to unplug it.
Step 4:
Reconnect and see what happens. I am now happily disconnecting and reconnecting as many times as i like and it just keeps on synchronising itself. MAMMA MIA!
If this solves your nasty "i need to reset every time I disconnect" problems then please post here to say so. If it doesn't work then post here also, I guess. If this is a solution for you then credit for this is not mine - it's just the sum total of a lot of searching across this and other forums, websites and message boards. THANKS!
not working
These steps did not work for me.
I still have to reset the device otherwise I get this message after about 5 minutes.
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
It appears to be only a problem syncing as I can still explore the device.
well...
...that's depressing. I genuinely thought that would work for other people too.
Did you read that PCWorld article I linked to? it explains how I got those numbers... they could be different for you, perhaps?
I'll keep thinking...
I did not look at the article. I'm having other issues trying to get my 2 computers synced with my mobile device http://forum.xda-developers.com/viewtopic.php?p=234189. Once I get those resolved I can try some different things.
On my home computer I am only synchronizing favorites and files and it doesn't appear to be a problem.[/url]
Oh right ok. I read your other post too, but I only have 1 PC for home and work so i can't help with that.
Has anyone else tried this?
I am no longer having the problem since I fixed my other sync issue (multiple computers issue). I had reinstalled activesync and did a hard reset on my device so maybe something else got cleared up. I am also having much better luck with the way my device is running. Before I was getting frequent slowdowns and lockups. I am a much happier customer and will be sticking with my cingular 8125. I just love all the features, but the activesync issues and slowness was starting to get to me. I'm so glad it is all behind me now and I can start to really enjoy the thing. Although I have yet to connect my bluetooth headset, that may have caused me issues too. Sorry I couldn't be more help testing this out.
I and a work college have had this problem on both our systems and found that it was being caused by Avantgo.
It would work fine and sync every time for days until we installed Avantgo.
After these we both had the symptoms you describe in the first post until we did a hard reset and re installed everything except Avantgo, it was then fine again. As a test I then reinstalled it and it started not syncing again, my college who has not reinstalled it has had no further problems.
I have now been running for 3 weeks with no problems and no Avantgo.
If you have it installed it may be worth trying it without for a wile and see if it helps.
Didn't work for me. Still no connection when plugging in for the 2nd time. MTU value changes back to blank when opening the Dr.TCP again, the other values are ok though. But thanks anyway for the hints!
Greetings,
Andreas
Didn't work for me neither...
just to check (i know this sounds daft) but you did DEFINITELY press the SAVE button in Dr TCP before you pressed the EXIT button? can't imagine why it wouldn't store the data.
aaaaaaaaanyway i guess it's not the ubersolution i thought it was
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Any updated? I'm having this same problem, except my device won't connect at all! Even after a reset. It connected once and that was it.
Hi Silentz,
sure, I saved the settings. I'll try the ActiveSync clean install-method and report the results. 'Hope that MS will put out an update or better version soon! Rumours out there?
Greetings,
Andreas
tried and failed...
tried the above TCP solution- Not working for me either...
Found best solution. Go try the latest imate rom. You can then plug out/in the cable as many times as you want & it'll just work fine.
Bebbo said:
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Click to expand...
Click to collapse
It seems to be as soon as you access the internet through the passthru connection on Activesync. So installing AvantGo/PocketWeather might explain this to a certain degree as they may be accessing the internet.
Incidentally, how could Microsoft have stuffed up so badly with Activesync? It's a tiny program but works so badly - Couldn't a third party come up with a different version of Activesync or something? I'd pay for it if it worked better than this crock!
Just for info, the latest iMate ROM (With Push Email) does indeed seem to fix this issue. Obviously it was with the WM5 side rather than anything that could be fixed on the PC side.
My Active-sink probelms disappeared since upgrade to the latest iMate ROM. Has been working like a charm with all apps and utilities installed, Tweaks2k2, Spb Pocket Plus, Pocket Informant, Worldmate Pro, etc...
told you it works
cheers
I am running the 2.08 (Qtek test) rom and have this issue since last friday. before that never had it!!
What I changed on thursday was: enable exchange server sync and use it. because push-email si no solution for me I just disabled it and dropped the association.
Then (on friday) the trouble started.
I tried DrTCP...and ended up with a broken netlogon (secure client) service on the pc. The IS solution for that was a new image . . thank you very much.
I am back on track with the pc now, but AS still slows down my device.
Are any of you having this trouble using or have used:
-Push email
-Blackberry
What is the amount of free program memory on your device? Mine is around 6MB (probably caused by Blackberry install which I cant remove). . . .
Related
Hi,
If anyone can spare some time to look at my problem.
Basically : I have received my new O2 XDA EXEC and have tried a few times to synchronise it using
- the included 4.0 Activesync
- the download 4.1 Activesync
Problem is : when I plug the USB to the device, it is recognise and Activesync start spinning and displays "Connecting..." but would just keep connecting without moving further (as screenshot below).
I looked for issues like this on various website and here, but nothing really looks like what I am experiencing, anyone has an idea where to go from now ?
I checked
- firewall (activesync is in the list of exception)
- uninstalled activesync, reboot pc, reinstall, reboot pc.. still no luck
- install activesync on a second PC and do the same: no luck
- used a different mini USB cable, no luck so it's not the cable.
Do you think I should send my XDA back ? everything else seems to work (GPRS, Wifi, BT..)
Thanks a lot for your suggestion ?
PS: the device is recognised as I can ping it too from the PC.[/b]
Well you seem to have hit all the usual suspects. Regarding the firewall issue, in ZoneAlarm I also watched the logs, found a blocked connection attempt that seemed to be my device and set that to the trusted/allowed zone which helped back when I was having problems. The next step might be a hard reset on the Exec.
Try disabling your firewall and test the connection.
For some firewalls you have to do more than just allow ActiveSync.
Try diabling the password. That cofused my activesync the first time I tried my replacement handset
Disable firewall completely, than retest if activesync will work. Helps in 99%.
HTH
Chris
I'm currently having "issues" with ActiveSync too. Every time I try to sync when there are more than about 25 changes that need updating, my JasJar decides to open an ActiveSync window on the JJ (for no apparent reason).
It only manages to show the top half of the ActiveSync window (The "Connected" section with the progress bar are missing) then it freezes, requiring me to do a soft reset.
The only way I can currently sync all details successfully is to kill all non-essential processes with a process manager, and remove all today plugins (!), then it works with absolutely no problems. Not a very elegant solution, but it works for now, and as I've tried absolutely everything else I can think of in THIS thread, it'll have to do for now...
it works fine now ! I have disabled the firewall and also ..
uninstall Cisco VPN client, so not sure which one it was that caused the connexion problem.
Thx to all your fast responses.
I have mine Sync successfully after removing the anti-virus software. Not sure whether it works or not to install the anti-virus back on. I have followed all the instruction in Microsoft website, but with Trend Micro installed, it just couldn't Sync. That's why I removed it completely.
Maybe this will help You (or me ) further :
I can sync at home without problems, W-XP ASync 4.1, Internet through a Linksys Firewall/Router.
If I come to the office I get exactly what You have, visible, but no syncing.
I use W-XP there as well, same ASync 4.1, Internet through the Office Network.
When I disconnect the network cable, Microsoft Office will immediately notice and complain. I wait between 30-60 second and ASync will actually connect and sync. It will not sync to a Exchange Server though, as this is disconnected with the cable.
I would have come with this issue here, but probably a little later, as other problems are of higher priority to me now, but maybe this information helps here.
regards,
Ruud
Perhaps this hint may help you under certain conditions: http://forum.xda-developers.com/viewtopic.php?t=39002
regards
df2jh
Hi df2jh,
thanks, interesting read. I was able to solve my issue in the meantime.
My firewall, MS is restricting the programs used by MS ASync and therefore does not allow syncing.
Solution for me :
Disabled processes wcescomm.exe and rapimgr.exe in the Windows Task Manager
Wrote a text-file in the directory where ASync is in !! which will be searched for by the firewall (do not recall the name of this file, but can check it out if somebody needs it.) This file has one entry to disable the firewall in concern of rapimgr.exe.
Then run rapimgr and wcescomm by hand and, WOW, WCESMgr.exe will run itself and syncing it working flawlessly.
What I did not understand until then :
1) this special file should be in the ASync directory, not in the firewall directory
2) this special file is only searched for when ASync is run (PC boot), not when the USB is connected
For me this is solved, though not everything else in my sync problems.
Hope this helps others,
Ruud
Might not be the same issue but you may find my post in this topic of use
http://forum.xda-developers.com/viewtopic.php?p=225939#225939
Might not be the same issue but you may find my post in this topic of use
http://forum.xda-developers.com/viewtopic.php?p=225939#225939
Had same problem on Kaiser and Wizard
I fixed it by going into Settings>Connections>USB to PC (in WM6.1, USB to PC is in system). Uncheck Enable Advanced Network Functionality. Fixed my active sync not connecting problems on both phones.
Hope that helps some of you!
escapemcp
Is there a credible alternative to Activesnc 4.1 anywhere ? I am absolutely sick and tired of this cr*p.
I want to be able to sync calendar, tasks, notes and files - reliably. That's all. That's not too much to ask is it?
Any ideas ?
TIA, DBo.
I'd be interested in one, been looking for a day or two but pretty new to the PPC thing and not making much progress.
Atm the only surefire way to ActiveSync seems to be, soft reset before sync, again after. It's quite a 1 shot deal, once it's synced, it won't again without a soft reset of the PDA. Note: Never needed to restart the PC used, I have tried this, no difference.
Have you read this?
http://forum.xda-developers.com/viewtopic.php?t=41955&highlight=activesync+solution
Solved that problem for me.
reading the other post now ... my activesync kills itself too i need to reboot my pc to make it work again ... apart from that it wont even synch all my contact ... it misses out random ones all the time
Can't tweak my TCP settings
I'd love to do this, but I can't go messing about with the TCP settings on my company laptop. Not if I want to keep my job.
I need a decent alternative to AS 4.1 even if that means AS 4.2
Silentz:
Yeah, tried that (amongst several hundred other things). I already use DrTCP for optimising my lans due to me using gigE with jumbo packets, so am pretty familiar with it on that ground. I also tried many other reg tweaks (on the PC not PPC) regarding networking etc. to no avail.
From all the tests and tweaks I've done I'm no further into solving this issue, which doesn't half stick in my side. PC m$ os with m$ software talking to a PPC with m$ os with m$ software, who the hell is writing this utter drivvle software?
I have concluded however that the PC / ActiveSync 4.1 side of things does not fail or lockup, regardless of reboots or no reboots or net settings used. It is the PPC's running ActiveSync which borks, stalls then grinds to a halt. I suppose it's possible m$ will fix the PC 4.1 software to not bust the PPC but I've also pretty much resided myself to needing a ROM update to fix the PPC half
This of all things annoys me, I've fixed almost everything else wrong with this phone but turning it off on a regular basis just takes the biscuit, like who does that nowadays? :roll:
Yeah that's right - it's the PPC which goes funky, but in my case it was down to the PC (i think) cramming data at it.
If you switch off (untick) all elements of the today screen it also works better, although that's not really a solution!
Microsoft do need to release ActiveSync 4.2 asap.
Yeah, tried all that, I only have MSN on today page anyways but have tried it with nothing. I only sync contacts anyway and even then only about 100 - still hangs if not the first time...
What about this?
Device Manager
Hi,
I was successful in resolving a "stubborn" active Sync, by doing the following:
Remove USB Cable to K-jam.
Open device manager.
Go to Network adapters.
Disabling adapter called: "Windows Mobile Based Device".
Re-enabling adapter called: "Windows Mobile Based Device".
Plugging USB cable back in.
Kind regards
Adrian
I was successful in resolving a "stubborn" active Sync, by doing the following
Click to expand...
Click to collapse
But for how long?
I find that AS is very unstable.
I have installed the latest ROM and still get problems with both my devices.
If I play an MP3 in Windows Media Player, AS drops the connection and I have to unplug my MDA Vario (or my XDA Mini S) and reconnect it again.
If I soft reset for any reason while still connected to AS, it drops the connection and on re-connect it hangs at 'Looking for changes' and I have to re boot the PC to get a connection again.
Other times without warning it will drop the connection and not re-connect without a re-boot of the PC
etc. etc etc.
Fortunately all my contacts, calendar and tasks are held on my PC in Thunderbird (I don't use Outlook) and I have a seperate sync programme for syncing them so I don't need to rely on AS for data sync.
But I do wish there was an alternative for enabling the connection to the PC.
Sorry in advance for another AS issue. However, search as I may, I couldn't loacte anything like this...
Anyhow, my T-mobile MDA (US) has about driven me nuts with this issue. I was able to sync successfully a few times. However, now when I plug in the MDA via USB (direct, not through any hub), it will connect but when the device starts to sync, I get the following error from ActiveSync:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync troubleshooter in Microsoft ActiveSync help on your desktop computer".
I've uninstalled activesync, deleted all registry entries, reinstalled, ensured proper firewall configuration, changed com ports, disabled my internal WLAN card and BT card...and nothing. Short of a hard-reset, I am at a total loss.
Has anyone else experienced this issue? Any work-arounds?
try to install everything again and don't plug it on the usb hub...coz power is not sufficient on a usb hub .. just try.
I'm getting the same error exactly on my Cingular 8125. plugged into pc directly via USB, tried reinstalling AS several times to no avail. Please help. I don't want to have to hard reset. :? Thanks
As I mentioned in my OP, there is no USB hub involved in my setup. This is a direct USB connection from my PC to the MDA.
ooppppssss
hehehe.. Are you syncing via the cradle or a hotsync cable ?. Sometimes if the cable is also charging, the connection is not sucessfull until it's fully charge and the top light is green.
I've had this problem myself before now.
Rockshow...are you also running SPB Weather?
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Firewall
Hi,
Do you use a firewall (Windows XP or other one)
If so, check this out.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
It worked for me!
grtz,
Pfeffa-rah
I'm also facing the same problem with my tmobile-mda(us). I had spbplus but after this problem, uninstalled it. but the problem still exists.. any help ?
i noticed 2 things with my sync problems which are now resolved. one problem was with softick card export, it was causing some errors which were gone when i uninstalleed it. but then had another problem, it would disconnect while syncing randomly. i found out that my cable was damaged(some dirt was in the connector which thankfully ruined the cable and not the phone part) also when u first connect ur device it shows that network connection in the taskbar with the bouncing yellow ball. if u right click it and click on repair that helps some time.
RoCkShOw said:
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Click to expand...
Click to collapse
What's the significance of PSB Weather? I've had sync problems, some days it works some days it doesn't. I can cope with that, but sometimes SPB weather doesn't update it self for days, which is a bit of a pain!
Incidentally I recently hard-reset my device, reinstalled SPB Weather and can nolonger select the option of syncing from weather.com, which limits my choic of available cities. Any ideas?
RoCkShOw said:
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Click to expand...
Click to collapse
What's the significance of PSB Weather? I've had sync problems, some days it works some days it doesn't. I can cope with that, but sometimes SPB weather doesn't update it self for days, which is a bit of a pain!
Incidentally I recently hard-reset my device, reinstalled SPB Weather and can nolonger select the option of syncing from weather.com, which limits my choic of available cities. Any ideas?
Try killing and restarting activesync on the phone. I've only had that problem once and that sorted it.
I had the same problem.
Found out it was my virus protection (TrendMicro PC-Cillin) When I disable my virus protection it syncs, otherwise it only connects and then gives the error you described.
I had the exact same problem untill a few minutes ago when I did a hard reset. I back up my all my data using Sprite but when I restored it gave me the same error message. I gave up and did another hard resetjavascript:emoticon(':x')
Mad. Right now I'm reinstalling all my programs. I would love to know how to fix this without a hard reset just in case it happens again....javascript:emoticon('')
Crying or Very sad
Hi:
Having here the same problem. Still looking for a solution... ANYBODY??
fadewiles said:
Sorry in advance for another AS issue. However, search as I may, I couldn't loacte anything like this...
Anyhow, my T-mobile MDA (US) has about driven me nuts with this issue. I was able to sync successfully a few times. However, now when I plug in the MDA via USB (direct, not through any hub), it will connect but when the device starts to sync, I get the following error from ActiveSync:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync troubleshooter in Microsoft ActiveSync help on your desktop computer".
I've uninstalled activesync, deleted all registry entries, reinstalled, ensured proper firewall configuration, changed com ports, disabled my internal WLAN card and BT card...and nothing. Short of a hard-reset, I am at a total loss.
Has anyone else experienced this issue? Any work-arounds?
Click to expand...
Click to collapse
I had the same error today. But luckely i was only using ActiveSync 4.0, so i just updated to version 4.2 (I had to because of the new rom upgrade). I haven't had the problem since. But i have only tried it once... so i donno.
same problems with my Neo today.
Funny thing is that I could sync for 3 days then it suddenly stops. USB is recognized but then the "connecting" sign is just on and on and on.
I've tried all the methods from Microsoft web and from you guys in this forum but hopeless. (except for Re-install XP sp2)
Still searching the solution
Cheers
same problems with my Neo today.
Funny thing is that I could sync for 3 days then it suddenly stops. USB is recognized but then the "connecting" sign is just on and on and on.
I've tried all the methods from Microsoft web and from you guys in this forum but hopeless. (except for Re-install XP sp2)
Still searching the solution
Cheers
Yeah,
I seem to be having the same problem. It connects, then just hangs at "Looking for Changes." It doesn't even load up the list of things that it normally used to showing what it's comparing to sycn up. It was working FINE until just now....I've resetted the PDA, and my comp a few times already, and I even allowed all those ports access in both directions, both TCP and UDP through Norton Firewall...I'm completely at a loss....Any ideas?
--Q
Activesync just keeps trying to connect and is never successful. I have re-installed Activesync on my pc but it didn't help. Also, my work pc doesn't connect either. Definately a problem with my 8125. All has been well for a couple months and I have added no new software before the problem started. This problem also happened about two weeks after I got the phone and the only resolution was a hard reset. What a pain reinstalling all the software and settings I have now, it's customized just the way I like it. Anyone know how to re-install Activesync on JUST the phone or have any other ideas?
Try the latest activesync 4.2 beta and disable any firewalls if possible on the pc. On the device start activesync application and go to menu\options - delete pc that you are syncing with and try again.
Deleted profiles on both pcs installed beta on one. Still no connecting. Tried clicking SYNC on phone, pauses for a second then nada. No connection.
Have you deleted profiles on the device? and disable firewalls, and if you have a network adapter enable it because latest activesync treats the connection with device as a network - there are many posts on this issue do a search and read through some - seem to be many different factors involved.
First- Thanks for the replies Mark
I removed the PC profiles from my 8125. Also reinstalled Activesync 4.2 on my work pc. Nothing. Although this time I got an error message- Cannot find the file "http://go.microsoft.com/fwlink/?linkid=65257&clcid=0x409" (or one of its components) Make sure the path and filename are correct and that all libraries are available". Like I would know what that means. Anyways, no firewall enabled. Besides, this should not be happening, all of a sudden, on 2 separate pcs. That kinda rules out a pc problem. It has to be in the phone. That, and the fact that a hard reset fixed it last time. I'm thinking something corrupted in Activesync on the phone???
And searching on this forum is useless. I type in "connecting Activesync" and every post with either word shows up. 614 in just Wizard forums alone. Is there a way to search so that ONLY posts with both words show up? That way I can modify my wording until I find something useful. Search for any terms or use query as entered is ticked. On other forums you can just use quotation marks but not this one. It makes searching very difficult. ROB
Oh, and yes my network adapters are still enabled as always.
Yes best to search with the word AND cuts out all the other stuff i.e. activesync AND connection would do it. Yep sounds like it may be the device.
found couple of posts that seem to be relevant
http://forum.xda-developers.com/viewtopic.php?t=41955
http://forum.xda-developers.com/viewtopic.php?t=44182
http://forum.xda-developers.com/viewtopic.php?t=49161
http://forum.xda-developers.com/viewtopic.php?t=44574
Happy reading, the last post is about connecting activesync via bluetooth so maybe thats an option.
Thanks Mark. I think I may try the bluetooth connection when I get home tonight. Or I may just throw in the towel and do a hard reset. that worked last time. Plus, I can install the latest ROM upgrade. Shame theres no way to uninstall and reinstall Activesync on the phone. Seems that should do the trick (maybe). Just tried my friends 8125 on my work pc- syncs just fine. So much for all the pc fixes everyone seems to be trying.
I had the same problem with AS refusing to connect via usb or BT.
In the end i went & purchased (although the demo version would have done) Sprite backup. installed on the PC. Browsed to the install dir to find the cab file. copied to my wizard (wifi, or sd card reader etc).
Insatlled & backed up to SD card
Hard reset
restore
stop here if you're happy, if not
AS to sync calender & contacts to pc
hard reset
update ROM
AS contacts, cal, docs etc back to wizard
install SW & settings
BACKUP
Yep. Had to hard reset. All is working again. Crappy Activesync. What's up with this P.O.S. ? Trying to setup bluetooth now and the pc finds the phone but AS won't connect. The phone finds the pc (HomeCenter) but it shows no services available. I'm assuming that there should be some listed (maybe Activesync?) Guess I'll have to do some searching for bluetooth problems with AS now. Did I mention that AS is a P.O.S??? But you all knew that already. :lol:
Dont forget to open a port in you BT settings (on the pc) and tell AS (also on the pc) to accept connections on that port.
Then your wizard should be able to see the AS service on the pc (you initiate the sync from the phone, not the pc)
I have had this problem since day one, and continue to have it despite several (more than 15) hard resets, multiple ROMs, multiple pertnerships etc. I plug in my PPC USB, and it just says "connecting" forever. Every time, after plugging in my USB, I have to shut off my PPC, and turn it back on. Then my laptop finds and connects with my PPC, and syncs all my data like it should. If I do this more than 3 times, my laptop crashes and reboots. If anyone has figured out how to fix this, let me know.
Hi. I've had a really good search for info before posting and tried lots of things but I'm stumped!
I've got a Softbank X01HT (HTC Hermes 200). It used to work fine with AS4.2 and 4.5 but stopped working one day and hasn't worked since!
When I connect the phone via USB everything looks normal. I get bing-bong and bong-bing etc, I can see the phone is attached in device manager, the phone charges etc. etc. but AS won't connect to the phone. In AS connection setting it says USB is available etc. I have deselected advanced USB connection and tried "work"/"internet" etc.
I haven't done anything to the phone. No upgrading of ROMS or OS or anything. I even gave my laptop a first birthday!
I have a Dell Precision M60 running Win XP SP2 and a fresh installation.
I have deselected "do not allow exceptions" in Windows Firewall and AS has put exceptions for itself in there.
I am not running through a hub.
I'm hoping someone can help - maybe I missed something in all my searching for a solution.
Had something similar happen to me once. Resolved it by deleting the partnership on the pc from within active sync on pc (make sure phone isn't connected or active sync won't let you delete the partnership). Issue was with the partnership profile on the pc getting corrupted nothing to do with phone at all. Once partnership is deleted connect phone (make sure you have reset your phone settings that you have changed back to default) and set up a new partnership. Good luck and let us know if it works.
Cheers
Barney
Barney
Thanks for replying.
As mentioned, my laptop got a "first birthday" i.e. the HDD was wiped and the OS re-installed. There are therefore no pertnerships or remnants buried deep in the registry etc. to delete. In AS (with or without the phone connected) everything except for "connections settings" is greyed out.
Cheers
Bryce
Do you by any chance have zone alarm running? If you do switch it off and see if it works. If you don't then switch off Windows Firewall and see if works. Post the results.
Cheers
Barney
tatuanui, have a look at
http://pocketpcapps.net/activetweak.aspx
maybe this freeware tool can help you
cheers jost
Whenever mine acts up I simply disconnect my phone, restarting my pc, restart my phone and is well. I dont have the problem often but it solves it for me
Active sync
I had a similar problem. Check out Settings/Connections USB to PC and uncheck "Enable advanced network functionality"
This worked for me.
May not be related but worth a try.
Thehoodedclaw_uk said:
I had a similar problem. Check out Settings/Connections USB to PC and uncheck "Enable advanced network functionality"
This worked for me.
May not be related but worth a try.
Click to expand...
Click to collapse
Thanks but, as metioned, already tried that one.
g35driver said:
Whenever mine acts up I simply disconnect my phone, restarting my pc, restart my phone and is well. I dont have the problem often but it solves it for me
Click to expand...
Click to collapse
Thanks. I wish it was something simple (yet annoying) like that...
Barneyabz said:
Do you by any chance have zone alarm running? If you do switch it off and see if it works. If you don't then switch off Windows Firewall and see if works. Post the results.
Cheers
Barney
Click to expand...
Click to collapse
Barney
Cheers. When at work, Windows firewall is off. When at home it is on but exceptions are allowed and AS has put itself in the exceptions. Switching off the firewall completely is not an option as the admin has switched that function off (greyed out). This is no different to when it was all working so I'm not so sure it's that.
I don't have zone alarm. In fact I have re-installed very little since having reinstalled Windoze.
Keep the suggestions coming though!
tatuanui said:
Barney
Keep the suggestions coming though!
Click to expand...
Click to collapse
Had a similar problem.
Open task manager. Is RAPImgr.exe taking up all the processor time on a CPU (so will take 50% on a dual core machine, 100% on single core).
I had this issue with AS 4.5 when upgrading from the old machine (Wizard) to the new Hermes and basically had to reboot between connection attempts to get RAPIMgr to die. When I killed it manually, the computer rebooted anyway.
The problem with this seemed to be disconnecting it mid-sync and then connecting a new phone which then broke it. The way I solved it was to stop connecting the Wizard.....
Perhaps try removing the relationships on AS on the phone. I guess it might work....
Hi last suggestion I have - I know you mentioned your pc was wiped so there are no partnerships, however the first time you tried to connect your phone since then something might have gone wrong and a partnership might have started to be created but not yet completed. With your phone disconnected can you open active sync, click on "file" then on "delete mobile device" (if it allows you to - it might be greyed out) - See if that works and get back to us.
Cheers
Barney