Hi, can someone help me with the service manual, or pictures of the inside of the qtek 8020 or Imate sp3i.Or how to open it. I have a defective joystick and for repair i should pay +/- 100 euro. I prefer to look at it myself and therefore i look for drawings, spareparts...or can anyone sell me an old defective phone or spare part for the joystick...I already looked on Wiki.xda-developers for drawings, but did not find the pcb layout of the qtek 8020.Is the 5way navigating pad (joystick)mounted on a pcb...I know, a lot of questions, but i like my phone and i would like to get it back on, thanks in advance :wink:[/img]
Related
i had my qtek 9000 in my pocket when i got out of my car...it fell on the ground and now the screen is broken...
al the functions still work (touchscreen and all)...the only thing is it has a crack in the upper righthand corner with a grey spot around it...everything projected underneath this spot is invisible...
anybody have any idea as where i can send my qek to get repaired, or where i can order a screen and do the repair myself..
has anybody seen a step-by-step explanation (with pictures), on how to open the qtek (jasjar)
thanx in advance
hi,
dont know if this helps but i read somewhere in this forum that a fujitsu siemens pocketloox 720 pda uses the same display....
Good luck
Wayne
thqt would be a step in the right direction....can anyone confirm this, as the replacement screens for qtek or jasjar aren't anywhere to be found
Just return it to any official Proximus-shop or even Belgacom-shop, they'll take care of it.
You should count on 6-8 weeks and a cost of 140 €
Just a simple question:
Are both phones the same? Do they use the same stylus pen? Do they use the exact same motherboard, screen, connectors and etc? The only difference is the case and keyboard shape?
Thanks in advance!
Both devices are HTC WIZARD 200. They have a different housing face plate and keypad. Therefore also the shape of the stylus might vary - I am not sure! I am using the MDA version which looks better on the front in my opinion. Allthrough I think the keyboard looks better on the 8125 ...
Anything else is the same in the devices.
A friend of mine is sending me a dead MDA and I'd like to know if I buy a Cingular 8125 with a broken screen, will I be able to use the motherboard from the MDA or the screen from the 8125 to get a fully functional unit?
Marton said:
A friend of mine is sending me a dead MDA and I'd like to know if I buy a Cingular 8125 with a broken screen, will I be able to use the motherboard from the MDA or the screen from the 8125 to get a fully functional unit?
Click to expand...
Click to collapse
I wouldn't buy a 8125 with a broken screen in first place! Research this forum for the SERVICE MANUAL of the HTC WIZARD! After seeing how to take it appart you might be able to imagine that too much can go wrong! The screen and the keyboard are the last things you can access! You open the device on the back and have to work all way down piece by piece until there ...
I saw broken screen WIZARDs on eBay for $150.00 - compared to that you can find working dev ices for $200.00 w/o contract.
Yeah I saw the service manual and got scared too, but I can give it a try I think, if I find a broken device for less than $150
Hi there,
My HTC TyTN screen is defect after I tried to repair the alignment issue. HTC seems not to be able to send me a new screenpart. Is there anyone here with a defect HTC TyTN after flashing who is willing to sell me his device?
Or does anyone know where to get spare parts in europe for the TyTN?
Thanks!
Dennis
screen defect
Hi there,
I have (on rare ocasions) seen tytn parts on ebay selling fairly cheap, it might be worth checking on there.
Failing that I thought HTC had a repair centre somewhere in London, you may have to leave it with them for a few days but they should be able to fix it for you for a fee.
Regards
Terryd1980
There was a thread recently from someone looking for the screen ribbon cable - this pointed to a couple of websites which sold tytn (maybe the O2 version) screens.
I'm a bit busy at the moment but will post the links if I find them later.
Edit: found the links - They're in this thread, hope on is useful to you:
https://www.cellulardr.com/proddetail.php?prod=Cingular8525LCD&cat=125
http://www.gethightech.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=CS
http://www.diytrade.com/directory/g...bbon_for_Dopod_838_Imate_K-jam_O2_Mini_S.html
http://www.factory2customer.com/index.php/cat/Home/cat_id/33218
dmxl said:
Hi there,
My HTC TyTN screen is defect after I tried to repair the alignment issue. HTC seems not to be able to send me a new screenpart. Is there anyone here with a defect HTC TyTN after flashing who is willing to sell me his device?
Or does anyone know where to get spare parts in europe for the TyTN?
Thanks!
Dennis
Click to expand...
Click to collapse
Almost 2½ years on and buying a brand new screen for a TyTN is not very economical anymore. If there is anyone on this forum with a paypal account, a broken TyTN/P3600 (but working screen !) and a helpful nature, then will you sell me your old TyTN so I can take out the screen and fix mine which cracked today ?
Thanks for any tips !
Hello all
I require some input from some of the gurus of xda-devs and its a question im guessing a lot people would like to know the answer to
Can we swap spare parts from say a Cingular 8525 to a MDA Vario II? (Herm200 --> Herm300)
what i mean to say is, lets say we could only find a front keypad for a cingular 8525, would it fit into the vario II?of course the orientation of keys would be correct for the cingular and not for the vario so you'd need a new front keypad aswell, but on the 'technical' level, is this possible?
many thanks
Don't quote me on this BUT I believe I read a post from Mike Channon saying that internally ALL the Hermes variants were the same. Be best to search through his threads, website or ask the maestro himself...
Cheers...
Yes that's probably about 99% true, BUT I notice the d/pad layout on some variants is quite different and so the underlying board may well be different - have not had time to fully check this.
Mike
Thanks for clearing that up Mike, as I said I wasn't totally sure...
Cheers...
many thanks
so mike, my theoretical scenario, would it work?
if i was to get a cingular 8525 d-pad board and a 8525 keypad to go over it, technically it ought to work right?
duke_stix said:
many thanks
so mike, my theoretical scenario, would it work?
if i was to get a cingular 8525 d-pad board and a 8525 keypad to go over it, technically it ought to work right?
Click to expand...
Click to collapse
I tried to check that out and did not find much info. BUT I see no reason for it not to work circuit wise. You might need to remap keys.
Have you checked that the 8525 keypad will fit the housing you have?
Mike
id happily modify the housing as a temporary thing, but i reckon i'll give it a shot and report back. i have a hunch it will fix the white screen issue.
does anyone know of anyone who has a brick they'd like to sell?!
Ebay is good, bought a couple of dud jasjams off there to fix mine and wouldn't you know it, one actually worked except for the camera & battery. Ended up cannobilizing MY Jasjam to fix up the "broken" one I purchased for parts....
Cheers...
I have bought on Ebay a new touchscreen for my Qtek S200, it only has come without an manual how to change it.
Does some one has a word document or something that explains how to change it?
Thanks,
Michael.
did you buy the whole lcd screen or the digitizer only? search for prophet manual here. some1 posted it here last year...