Related
Hi everyone...I'm a newbie. Been reading all the pages but can't find answer to my q.
I installed T-Mobile ROM 4.01.16 downloaded from ROM kitchen. Unfortunately, now I cannot use the phone on my xda. It simply can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the rest works fine except it hangs sometimes.
I've tried to install new ROM, one for O2 xda but the error message below surfaced:
ERROR:Get Connection type - An existing connection was forcibly closed by the remote host
error getting connection type.
Now I'm unable to install a new ROM. Even via SD card. Please help.
PS Have also tried using xdatools to unlock. I get the same error message ie the remote host forcibly closed connection
If it's a PW10A-Model that you have try entering Wallaby Bootloader and set GSM settings manually to 900/1800. Installing the 4.01.16 ROM sets the settings to 900/1900. Maybe this is your problem...
HTH
Stefan
Same problem over here
Hello,
I also installed the t-mobile on my o2 xda accidentally,
i already put it on european band frequency 900/1800 via the wallaby editor.
But still i'm not able to put back the o2 wme 2003 on it.
any solutions for this issue ?
thanks in advance,
thomas.
Flash your ROM via SD-Card....
Thanks so much Lumpi. Now my phone works but a different problem crops up. The device once turned off, will not turn on unless I soft reset it. Also, when it is off, the phone will not ring/vibrate when there's an incoming call. The green LED flashes as usual, indicating phone is working. Any idea how to fix this? Thanks inadvance.
another Q: can I use an MMC 256MB card to flash the rom or can i only use SD card?
fadzrina said:
Thanks so much Lumpi. Now my phone works but a different problem crops up. The device once turned off, will not turn on unless I soft reset it. Also, when it is off, the phone will not ring/vibrate when there's an incoming call. The green LED flashes as usual, indicating phone is working. Any idea how to fix this? Thanks inadvance.
another Q: can I use an MMC 256MB card to flash the rom or can i only use SD card?
Click to expand...
Click to collapse
Have you used KSE Truefax? I think that is the problem with not turning on the device....
I think you can also use a MMC Card. Never tried it myself, cause i only have SD-Cards...
Stefan
I've never use Truefax eventhough I have it on the device as I cooked it in the ROM. Any other ideas? Thanks
I had the same problem with 4.1.16 and KSE. It doesn't matter if you "use" it or not. Something about KSE being cooked intothe rom stops the device from operating correctly. To date you are the 5th person I know of to have that problem. Recook the same rom less KSE, reflash, and I can almost garauntee it will work.
thank you everyone....it is indeed the KSE Truefax that was the culprit. I've since invested in a card reader/writer and a 256MB MMC card and my phone works again!
PS special thx to lumpi
tm 2003
I installed T-Mobile ROM 4.01.16 downloaded from ROM kitchen. Unfortunately, now I cannot use the phone on my XDA. It simply can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the rest works fine except it hangs sometimes.
I've tried to install new ROM, one for O2 XDA but the error message below surfaced:
ERROR: Get Connection type - An existing connection was forcibly closed by the remote host
error getting connection type.
Now I'm unable to install a new ROM. Even via SD card. ROM sets the settings to 900/1900, and I can’t get into Bootloader via SD flashing nor power, soft reset, rocker/action…Any suggestions?
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
crus said:
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
Click to expand...
Click to collapse
Install this...
copy to device through ActiveSync explorer.
Goto device's File Explorer, look for the CAB file that you just copied.
Tap on the file to install.
Sandisk Driver
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com, have tried both the Wifi, and the combo wifi card, the wifi works well. The combo also works okay, although does have some lock ups, but IT DOES WORK!!!
I have been tyring to export ROM without doing any harm to device as only have it on load for a few more days, as want to bring the SDIO driver accross to my XDA2.
Have noticed the BT is having problems also, and would envisage an update is coming for this to bring up to new version that is on XDA IIs.
henrylim:
Install this...
Click to expand...
Click to collapse
Thanks.
I shall try it when I get off work tonight.
Thanks again.
But one more question, does anyone know if the WLAN adapter should come with the XDA Mini?
You have to install the driver first .
After that no problemos
it work fine ( WifiFofum work very good !!!)
Re: Sandisk Driver
lampard said:
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com
Click to expand...
Click to collapse
Hi,
the latest driver from sandisk that you have mentioned, is it this?
http://www.sandisk.com/download/Drivers/wifi/256mb-setup03.exe
or something better?
I'd tried this before in WM2003SE 2.06. No dice. If it works in Magician, I'm inclined to hope that the SDBus drivers has been updated, and (cross my fingers) that SDIO H/W slot is the same.
hmm....something more to be cheerful about during Christmas...
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Different version of SDIO drivers
lampard said:
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Click to expand...
Click to collapse
I wonder why I didn't look at this before.
The Mini and JAM has the same version of SD drivers:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"SDMemory"="0.25.00"
"Common"="0.25.60"
"SDBusDriver"="BSQ 1.2 + 0.25.00"
Whereas the 2.02/2.06 has these version:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"Common"="0.15.10 HIMA"
"SDBusDriver"="0.15.00 HIMA"
Anyone can confirm the 2.20tl version?
The drivers are in the ROM though, and it's not a simple search and replace operation.
I wonder, would it be worth to upgrade the Himalaya with Magician ROM???
I'd quite a few pple now that says that the 256MB SD drivers for PPC 2003 works with the Mini now. I've tweaked the registries for the Himalaya, but only get as far to allow the wlan tools to recognise the card..still no joy.
Guess what...sd wifi of (256 combo) working....
I've managed to get the Wifi portion of the Sandisk Wifi 256 working
on my 206 ROMed XDA2 device.
The steps are abit complicated, so try at you own risks!
The steps are:
(a) download the sandisk 256 drivers from www.sandisk.com (256mb-setup03.exe)
(b) remove your XDA2 device from the cradle, and execute the file.
(c) Goto to the Microsoft ActiveSync folder, and look for this folder "SanDisk Corp\Wi-Fi_WINCE400"
(d) Within this folder, there is a Pegas.2577.CAB
(e) Using WinCAB Manager, open this CAB file
(f) Within the Pegas.2577.CAB file, there is another "SDBusDriver12.CAB" at file index 5.
(g) Now, download the Magician ROM (the SD card version) from the forum's ftpsite.
(h) Using dumprom, dump the contents of the Magician ROM and locate 2 files "SDBusDriver.dll" and "SDMemory.dll"
(i) Replace these 2 new files with the ones in the "SDBusDriver12.CAB"
(j) Re-save the "SDBusDriver12.CAB" and replace the file in "Pegas.2577.CAB"
(k) save "Pegas.2577.CAB" and connect the XDA2 device back to the cradle.
(l) install the Sandisk drivers following the prompts.
(m) Soft reset the XDA2 device when done.
Insert the 256MB+Wifi SD card, and activate the Wifi !!!
You might find that I've gone the long way as I have yet to figure out the full implications of the setup. It doesn't replace the original DLL files in /Windows as the 2 files are installed as CUSTOM SD drivers.
Perhaps we can pool our brains together and crack the SDMemory portion.
I am surfing on my XDA2 device using the Wifi as I am writing this, so I believe we are close to the verge of cracking this.
hello,
I recieved my s100 with the sd wifi/storage card and trying to setup a wifi connection.
I installed the sd drivers and i scanned for an wifi accespoint i noticed that my neigboars are having a wifi acces point.
but i get this message:
unable to obtain a server assigned IP adress.
what i'm a doing wrong?
I can't get wifi to work!
hello,
I just can't get the thing working
I tryed the following:
I installed the driver from scandisk that was on my cd ( the same as mentioned here) everything goes well but i looks like he doens't install the pegas stuff.
I do get a wifi connection link ( settings ->connections -> sandisk wifi
I alsow tryed the tutorial of henrylim but i get stuck at point c becaus there are no files in my activesync folder.
I did try to find wifi networks and i did find a netwerk from my neighboars, i saw there connection if it was securred and mac address an everything.
I didn't get a IP address
@ the AP Browser part i saw it and the connection was 33% there.
But when i go to the status it doens't show anything but that the device is Associating and then the network name.
if i than try to use the internet it wants to use gprs and not the wifi card.
can anybody plz help me I would really like to use the wifi on my magican.
Do you have a DLINK AP ?
If so, ithey do not get along very well
brilca said:
Do you have a DLINK AP ?
If so, ithey do not get along very well
Click to expand...
Click to collapse
i don't really know what you mean.
i was talking about the standard sandisk software and there is a tab called "AP Browser"
what is the brand of the access point wi-fi that you have ?
brilca said:
what is the brand of the access point wi-fi that you have ?
Click to expand...
Click to collapse
bussy deciding whitch one to buy, I'm now trying to access the neigboars netwerk.
Unless your neighbour has specifically allowed you access to his network you will probably not be allowed to connect.
And as long as you're trying with your neighbours access point, brilcas question about the make of the access point would apply to the one they have.
OK I had a wifi connection.
my brother turned his laptop into an AP and i had a connection with it.
So I know the wifi on the imate works but there's still one problem.
When i was connected with wifi and i tryed IE explorer it wanted to connected by using wifi.
How can i change that into wifi?
eltinio,
I am still trying to get WiFi to work on the WM2003SE UK XDAII version...
In response to your question, you need to tap Start > Settings > Connections and then tap Connections (make sure your WiFi card is in and enabled).
Tap the Advanced Tab and then tap the Select Networks button, from the first drop down list select My Work Network and then tap Edit.. > Proxy Settings tab and then tap the 'This Network connects to the Internet' checkbox and then tap OK to save and OK again to exit the connection manager.
You will no be able to browse the internet...
henrylim,
Could you post a link to the WiFi drivers you cooked or provide the file in this thread please so we can all test it out as most people may not able to perform the tasks you have listed to enable the WiFi drivers.
Thanks in advance,
Godz
XDA Mini and SD Wi-Fi
Do you guys know if the SD Wi-Fi card Sandisk or Sockets supports WPA encryption when added to the Mini and also if the problems with Dlink 54G/B wireless access points have been fixed yet?
Please help me make my Sandisk 256+wifi work on my XDA Mini.
All the time i want to enable the wifi i have to reset the deive then insert the card...after inserting the green light apperas but when i want to configure it byit's software by clicking on the antenna below the screen the device freezes so i have to eject the card then device backs to normal state.
Please help to have the latest driver or additional software and assist me to make it work..
Regards
ROM: 1.12 O2 Xda Mini
Hi:
I don't have one, but i went to www.sandisk.com and found this, before i bought the card:
http://www.sandisk.com/pdf/retail/wi-fi-sd-compatibility.pdf
Sorry mate, it is not compatible!
Only the version without memory..
Bye
Driver
It's compatible..cause in the list for MDA compact which is as same as XDAii Mini bith cards are compatible...
Still looking to find stable driver and solution
Regards
Mine Combination is working fine....
Using German 1.12 ROM and latest driver from sandisk.com
Stefan
Sorry you are right they are compatible! my mistake!
Good luck
Glad to hear at least one person can work with it..so how can i obtain your ROM?
Hi
I have the same problem a few weeks now.
Before it worked great no problems at all.
i have the latest drivers and using rom 1.11.00
Don't know what's happend why it doesn't work properly anymore.
grts leon
LumpiStefan said:
Mine Combination is working fine....
Using German 1.12 ROM and latest driver from sandisk.com
Stefan
Click to expand...
Click to collapse
You mean you don't have to reset your device for working with it?
will it be detected everytime you turn on your MDA?
Have it hanged ever?
So why mine doesn't work?
Hi
Remove the drivers from your PDA by going to start-> settings->system-> remove program. Select the entries for the Sandisk card and remove them. Soft reset your PDA and then try the drivers from the website for PPC 2003.
After the driver has been installed. Please do another soft reset of the PDA and then insert the card.
Here is the configuration that should be on your PDA. The bluetooth support should be disabled. Tap on the two arrows on the top of your PDA. go to settings-> click on connections and then the advanced tab. then Tap on the network card to connect to your access point (AP). AP browser will be grayed
out, This is normal as we didn't develop a utility for pocket pc 2003. Make sure you have the automatically connect to non-preferred network option checked. If there are no items listed in the wireless networks box you can add your AP by tapping on "Add new Setting" Type the network name for your wireless network. You can find this in the configuration of your router. After you enter the name make sure "connects to" is set to "The Internet" and then tap on the authentication Tab. If you are not using the wep key, you can uncheck the box for wep. If you are using it on your router make sure to set it exactly the way it appears on your AP. When you finished making all those changes please tap on OK that appears up at the top. IF your AP is on, and within the range, you should see connected next to it and the tower to the left of it will have a
blue ring around the top. If you see a red X on the tower and it shows unavailable you should check the following:
1-IS the AP on
2- Is it in range 3- are your settings correct.
Once you see the connected next to your AP you can tap ok twice and begin using your wireless access.
It works for me
Grts Leon
I've tried about one gazillion suggestions to make Activesync work over USB on my Qtek 9100, and I've given up. I went for BT connections, which works fine.
However, RUU doesnt work over a BT connection (i get to the multicolor boot screen, and, of course lose the BT that would allow the update to finish...).
Is there a way to do it via the SD card, and, if so, can somebody get me the SD image for the latest french version ?
Thanks all.
What is the problem with your USB ActiveSync?
I thought I was going to go crazy trying to sort out mine, because it would just hang on "Trying to obtain address" (=DHCP) when I connected.
In short, the problem turned out to be having the DHCP service at "Manual" (go to Start->Control Panel->Administrative Tools->Services). I resolved it by choosing "Automatic" for starting the DHCP service. If it's not set at "Automatic" for the start type,
ActiveSync won't recognize the device because the background method of connection for ActiveSync involves the PDA acting as a DHCP server and your computer receiving an arbitary IP address in order to communicate with the PDA.
Thanks for the suggestion, but its one of the many things I tried... to no avail.
So, back to my original Q, is there a way via the SD card ?
i've read that there is a prog. to specially format the sd card, and include the rom extracted from the .exe... please help me, I can't find the reference.
Use bootloader
If you put your Universal into bootloader mode as documented here: http://forum.xda-developers.com/viewtopic.php?t=37432 then you can connect to your PC over USB without Activesync and run the appropriate upgrade program.
Although I have Activesync working over USB intermittently I found this the surest way to upgrade.
Hope this helps!
excellent !!
Activesync doesnt work, but the RUU does !!
Thank you very much
I'm got yesterday Wireles LAN Card SDIO 802.11b.Problem is that i can't connect my Qtek 2020 with this card.Can somebody help me about this problem?Thanx
Have you installed the drivers on your device? The card should have come with a CD, if not go to the manufacturers site.
Can you detect any networks?
Please describe the problem more precisely, and maybe someone can guide you better then this.
I'm totaly new in this.I tryed to folow instructions in manua.I instailed all drivers that i have recived,but still i can not find network and i have one wireless in my house.My main problem is that i don't know how i can make set up in my Qtek 2020.Thankx for any sugestion
Ok, I never actually used a separate SD card, but I just finished setting up my home network last week so I'll try to give you some pointers until someone more knowledgeable comes along.
1) If everything was installed correctly, you should get a new icon, in settings or programs (depends on the card I think) for the Wireless utility.
There should be an option to turn it on and off, so make sure its on.
2) If you are not sure how your network is configured, or just don't want the hassle of manually setting up the device, download Hitchhiker.
http://www.kasuei.com/hitchhiker/ its a free app that will automatically configure WiFi and connect you to the network. You will need .NET CF2 installed for it to work.
Also you can see any networks that were detected in Start->Settings->Connections->Network cards. You can choose there which one to connect to or manually configure the settings.
Thank you mr.Levenum!!!!
I will download tomorow this progam and i will try to connect SD card with Qtek again.I hope that will working well.Thank you too much for your help. Best regards
Hi!
I followed all instructions,and i instaled drivers and utiluty from instal cd.Problem is that my Qtek can't find any avalible wireles network and i have one in at home.I put all correct parameters for this network,but still nothing.I also tryed with program"Hitchhicker",but problem is the same,hi can't find any network.Have you any sugestion what more i can try.Thank you
Try checking the settings on you router.
Is it set to broadcast SSID?
What standard is the WLAN card B / G ? And what standards does the router support?
Also it is possible that your router is set to a channel the WLAN card does not support (my router supports up to channel 14, but my Jamin only up to 11)
Try using a different channel.