I've tried about one gazillion suggestions to make Activesync work over USB on my Qtek 9100, and I've given up. I went for BT connections, which works fine.
However, RUU doesnt work over a BT connection (i get to the multicolor boot screen, and, of course lose the BT that would allow the update to finish...).
Is there a way to do it via the SD card, and, if so, can somebody get me the SD image for the latest french version ?
Thanks all.
What is the problem with your USB ActiveSync?
I thought I was going to go crazy trying to sort out mine, because it would just hang on "Trying to obtain address" (=DHCP) when I connected.
In short, the problem turned out to be having the DHCP service at "Manual" (go to Start->Control Panel->Administrative Tools->Services). I resolved it by choosing "Automatic" for starting the DHCP service. If it's not set at "Automatic" for the start type,
ActiveSync won't recognize the device because the background method of connection for ActiveSync involves the PDA acting as a DHCP server and your computer receiving an arbitary IP address in order to communicate with the PDA.
Thanks for the suggestion, but its one of the many things I tried... to no avail.
So, back to my original Q, is there a way via the SD card ?
i've read that there is a prog. to specially format the sd card, and include the rom extracted from the .exe... please help me, I can't find the reference.
Use bootloader
If you put your Universal into bootloader mode as documented here: http://forum.xda-developers.com/viewtopic.php?t=37432 then you can connect to your PC over USB without Activesync and run the appropriate upgrade program.
Although I have Activesync working over USB intermittently I found this the surest way to upgrade.
Hope this helps!
excellent !!
Activesync doesnt work, but the RUU does !!
Thank you very much
Related
I'm got yesterday Wireles LAN Card SDIO 802.11b.Problem is that i can't connect my Qtek 2020 with this card.Can somebody help me about this problem?Thanx
Have you installed the drivers on your device? The card should have come with a CD, if not go to the manufacturers site.
Can you detect any networks?
Please describe the problem more precisely, and maybe someone can guide you better then this.
I'm totaly new in this.I tryed to folow instructions in manua.I instailed all drivers that i have recived,but still i can not find network and i have one wireless in my house.My main problem is that i don't know how i can make set up in my Qtek 2020.Thankx for any sugestion
Ok, I never actually used a separate SD card, but I just finished setting up my home network last week so I'll try to give you some pointers until someone more knowledgeable comes along.
1) If everything was installed correctly, you should get a new icon, in settings or programs (depends on the card I think) for the Wireless utility.
There should be an option to turn it on and off, so make sure its on.
2) If you are not sure how your network is configured, or just don't want the hassle of manually setting up the device, download Hitchhiker.
http://www.kasuei.com/hitchhiker/ its a free app that will automatically configure WiFi and connect you to the network. You will need .NET CF2 installed for it to work.
Also you can see any networks that were detected in Start->Settings->Connections->Network cards. You can choose there which one to connect to or manually configure the settings.
Thank you mr.Levenum!!!!
I will download tomorow this progam and i will try to connect SD card with Qtek again.I hope that will working well.Thank you too much for your help. Best regards
Hi!
I followed all instructions,and i instaled drivers and utiluty from instal cd.Problem is that my Qtek can't find any avalible wireles network and i have one in at home.I put all correct parameters for this network,but still nothing.I also tryed with program"Hitchhicker",but problem is the same,hi can't find any network.Have you any sugestion what more i can try.Thank you
Try checking the settings on you router.
Is it set to broadcast SSID?
What standard is the WLAN card B / G ? And what standards does the router support?
Also it is possible that your router is set to a channel the WLAN card does not support (my router supports up to channel 14, but my Jamin only up to 11)
Try using a different channel.
i cnt seem to be able to connect via activesync for some strange reason. It has been working fine but since yesterday when i connect my mda it just keeps saying "connecting".
Anyone got any ideas on how to sort this......i want it to work so i can flash my mda with wm6 or a different rom.
thanks in advance...
Try to switch the connection (bluetooth / IR / USB)
i would but i want to flash my mda and it cannot be done unless synced via usb
Since you are going to flash it, backup your phone and do a hardreset and try again?
I have a same problem. I connect my Charmer to my notebook and it work fine. When I connect my desktop the Charmer can't connect.
I found the problem. The Charmer try to request an IP address for the DHCP server but the firewall block the request.
Read this post:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
First of all i really want to thank all the Helmi_c and all the developers; My BA is most updated running wm6.
Well much better than wm5 but I have some issues:
1. cant sync it with my PC in anyways (BT, usb etc), USB drivers are not working correctly.
2. sometimes when i pick or dial a call, i cant hear nething.
and last but not relevant to this, guys how do i stop my BA slider from falling down when I use keyboard.
1. Try delete the actual partnership in AS, sync again; if not reinstall AS on PC
2. No problem here with the sound.
same problem here
I upgraded my XDA2s, customized it,backedup, then upgraded my brothers XDA2s and used my customized backup on his XDA2s.
Now my XDA connects fine, but his doesn't !!!
Both our XDa2s's are identical in everyway.
tried a hard reset and restore from another backup and still no luck!
we were trying to save time re-installing the same softwares.
tried deleting partnerships, no luck. tried spb backup and clone, no luck.
any ideas!
Do you get any error messages on AS? Can you browse the internet from device?
usb drivers
can anybody post usb drivers i think this is the problem cause my device isnt installed properly it says problem with inf file.
whoever is able to connect his device to xp desktop via active sync usb connection, please copy the drivers folder contents from program files in active sync folder.
thanks, hope this works
Is your windows firewall enabled? Since WM6 activesync makes use of a LAN connection to sync with the PC, you must allow activesync trough the windows XP firewall, or disable the windows XP firewall completely...
no sound problems with me...
did you try to install WM6_SoundFix_.cab ?
A-
Hi,
I'm trying to install hard-spl to flash my TC with wm6.5 rom that I have made with kitchen available here.
Problem: ActiveSync connection is ok, I can sync, explore etc. But when I run ROMupdateutility.exe it gives connection error 202.
I don't see any security messages about running enterbootloader.exe or anything else either which is weird, just this 202.
I have tried to change phone's "enable advance network functionality" setting, no luck.
I have 2 pc's with WinXP, other one has no internet connection, firewall or anti-virus software, getting exactly the same result with both pc's.
I have tried different usb cable, port, many many soft resets...
There's Symantec SmartPhone Security on the phone, I have disabled the auto-protect, but no luck.
Any ideas???
ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
Have you tried a hard reset make a backup first as it removes all apps installed and data 'phone numbers text's', I think with Symantec SmartPhone Security removed as long as activesync works it should be ok.
Hi, hard reset seems to be the last way to try. I have read this forum 2 nights now and not found any other ideas :-(
Running wm6.5
Hard reset might be THE solution for many people I think.
Installed BsBTweaks on my HTC HD2, but now ActiveSync won't connect to my phone. PC O/S is Win XP SP2. I'm running WinMo 6.5 and have the latest ROM for the device from my provider, version 3.14.531.1. I get the message: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again." I haven't yet made any changes to the device using BsBTweaks, I only installed it. Have tried rebooting the phone to no avail. I have to use Disk Drive mode to get at the pictures on my SD card. Is there a way to get ActiveSync working again? I'd probably donate to the developers if this problem could get corrected and I can reasonably figure to keep and use BsBTweaks. Thanks.
phlashlite said:
Installed BsBTweaks on my HTC HD2, but now ActiveSync won't connect to my phone. PC O/S is Win XP SP2. I'm running WinMo 6.5 and have the latest ROM for the device from my provider, version 3.14.531.1. I get the message: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again." I haven't yet made any changes to the device using BsBTweaks, I only installed it. Have tried rebooting the phone to no avail. I have to use Disk Drive mode to get at the pictures on my SD card. Is there a way to get ActiveSync working again? I'd probably donate to the developers if this problem could get corrected and I can reasonably figure to keep and use BsBTweaks. Thanks.
Click to expand...
Click to collapse
Have you tried to restart your PC and try different port?
Sometime this trick works
silverwind said:
Have you tried to restart your PC and try different port?
Sometime this trick works
Click to expand...
Click to collapse
Restarted the PC - worked like a charm. Thanks a million. I can breathe again.
...And I just made a modest donation. Thanks very much.
Troubleshooting Sync Connection with Your Computer
You can often solve any temporary sync connection problems by disconnecting your phone from the sync cable, waiting a few seconds, and then reconnecting it. However, sometimes you may experience persistent problems related to your network connection (for example, your Internet connection). You may be unable to sync your phone while there is an active network connection on your computer, or the network connection may be cut when you connect your phone to your computer. If this happens, you can try switching to a serial USB connection for your phone:
1. On the Home screen, slide to the Settings tab.
2. Tap Menu > All Settings > Connections > USB to PC.
3. Clear the Enable faster data synchronization check box.
4. Tap Done.