Related
Hi all
Just looking for some inspiration or help prior to throwing my 9100 (and probably myself at the same time) off the nearest cliff!
I've read all the threads on getting ActiveSync 4.x to work with WM5 but none have seemed to work for me. My problem isn't establishing a partnership - does that fine - it's just that it takes about 2hrs+ to sync my Wizard with Outlook. All the right elements of AS are given the right permissions on my firewall (even tried it with F/W switched off and still no joy!) - just can't figure out why it's taking so long - there's not that much info to sync - in fact, I could probably key it all in manually quicker!
So, unless anyone can suggest otherwise, I figure I've got a couple of options:
1, wait for MS to release their fixed version at the end of November (assuming they do and assuming it fixes the problem - too many assumptions here to get me excited or hopeful!) or
2, buy a BT dongle for my PC and sync over BT instead of USB. Anyone tried this way of syncing? Does it work well?
Kind of last resort really prior to losing my sanity. BTW, this is the only problem/issue I've got with the Wizard (which isn't really a Wizard fault, more Uncle Bill's fault) - it really is a great convergence device!
Thanks for any help.
is your connection from your 9100 straight into the pc or is it via a hub?
also are you connecting using usb 1.1 or 2.0
I have had delay problems since installing zone alarm, sometimes if i disconect the usb at the k-jam end and re-plug in, it then works straight away.
tired both and makes no difference - at the moment it's straight into the pc using usb cable - the usb slots on pc are usb 2, but not sure what speed the cable that's shipped with 9100 is???
have you got zone alarm installed?
nope - norton internet security 2005 with all the latest updates (same goes for XP SP2, Office 2003 SP2, although I have uninstalled the Outlook Junk e-mail filter)
nope - norton internet security 2005 with all the latest updates (same goes for XP SP2, Office 2003 SP2, although I have uninstalled the Outlook Junk e-mail filter)
got rid of norton, found zone alarm much more user friendly, apart from activesync 4.1.
never had problems with activesync 4.0
have you ever tried using bluetooth to sync with pc? small investment = less headache - no?
Try booting in safe mode and see if that makes a difference. If it does, you have something starting up that is causing a problem. I have seen nortons internet security cause problems in the past. When you connect via usb, it actually assigns an ip address and configures a network connection. Network connections are controlled by firewalls. I had probs connecting and turned of my firewall and it didnt make a difference. It was the firewall that was causing the prob. Once I got it setup correctly, IE ALL exe's in activesync folders allowed full access, it worked fine. I also use bluetooth to sync and it is just about as fast. It is slower when installing programs or transferring files, but syncing is no prob. Hope this helps.
John
www.skynetworks.gotdns.com
thanks for the advice - will probably give bluetooth a try - not over concered about security as there's nothing of real value to anyone else on the device.
thanks for the advice - will probably give bluetooth a try - not over concered about security as there's nothing of real value to anyone else on the device.
Can anyone help please?
I cannot get my xda mini to sync. Basically it just keeps running and nothing happens.
I have researched a lot of threads which refer to setting up a dummy server connection for what I presume is the the "exchange server" which I have attempted - is this a false IP address please?
On my PC, activesync diplays Exchange Server and my XDA with a list of the sync items below.
I keep getting a message on the XDA saying it cannot retrieve an IP address for the connection. Sometimes when I sync the try to connect via GPRS
I do have a wifi connection set up which now works (most of the time).
TIA.
I have the same problem as you with my QTEK 9100. Sometimes it works to connect the device to my portable computer (Compaq Presario 2800) via ActiveSync but mostly it does not. ActiveSync just keep looking for the device but doesnt find it.
I have also tried after that I have turned off the firewall and antivirus software, but it still doesnt work. The few (2-3 times) that it did work I had my firewall and antivirus running.
Anyone have an idea what I should do? It's a brand new QTEK 9100 (just got it a few days ago) with ROM 1.3.7.13 SVE, ROM date 9/29/05. Since I can't connect my device to the computer I can't upgrade the ROM.
turn off your firewall
disable your onboar intell wifi card if you have one
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
nolovelust said:
turn off your firewall
disable your onboar intell wifi card if you have one
Click to expand...
Click to collapse
thanks but as I said I have turned off the firewall, and I don't have a built in wifi card in the laptop.
macrinus said:
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
Click to expand...
Click to collapse
Yes it is the same problem no matter of the soft reboots. The only times I get it to work is when I have reinstalled the activesync 4.1 software on my laptop, after a reboot (of the laptop) it does not work; instead it only display a network icon with "Limited or no connectivity" (this is also without both firewall and antivirus installed) when I connect the device. The result is that AS can't find the device...
My theory is that it somehow looses the USB drivers installed with ActiveSync 4.1 when I reboot the computer. Anyone know how to fix this? Which (dll?) files belong to the USB drivers? I might be able to manually replace them in the correct path if I find that out...
any news??? I just met the same problem
simple enuf chaps...
i just met the same problem and the fix is pretty simple...
remove a/s 4.1
re-install a/s 3.7 / 3.8.1
re-establish the partnership
re-install 4.1
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
I am using Dopod 838, the asia version of Qtek9100.
I also seems to have problem on activesync 4.1 which keep on sync and fail to connect. When it fail. I will try
1) In Windows Task Manager, kill wcescomm.exe
2) Kill everything in wizard
3) manually turn-on activesync4.1 on pc again.
4) connect wizard with PC again..
I just bought my phone for 2 days and i have to try a few more times to confirm it really helps.. may be you can give it a try too.
PeterP said:
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
Click to expand...
Click to collapse
you will need AS 4.0 and above for all WM5 devices
You might want to check device manager when your device is hooked up via USB and make sure there are no exclamation marks on your handheld device.
I have a laptop and I only installed ActiveSync 4.1 and it works fine. I've even re-imaged my laptop since getting the phone and wasn't a problem second time around. I also installed 4.1 on my work PC and it works fine there too.
Not sure if you can use anything older than 4.0. (Not sure the reasons why)
At work I tried to use 3.8 (Just for the hell of it) but 4.0 updates all the USB drivers and stuff. Anything below 4.0 will not recognize WM 5.0 devices as jfran said. After installing 4.x I don't know the reason or need to uninstall then install something older then uninstall and reinstall 4.x.
It should work straight after install. However I do NOT know what happens if by chance you had an older version of ActiveSync then tried upgrading to 4.x. Should work though. I know people have had success upgrading from 3.7 and 3.8 to 4.1 to use the newer Dell Axim x51v which have WM 5.0 here in my environment.
Thanks everybody for your replies,
it was after hamish_dy tip I wanted to know how to get an connection between AS3.x and a WM5 device, since I haven't been able to do so. And I also have read that WM5 needs AS 4.x in order to sync.
Have had my Qtek9100 now for a week, and have been studied this forum in detail for a solution on my problem.
Previously I had a Qtek S100 which synced with my laptop together with AS 3.8. My company uses Groupwise as e-mail system, but with Outlook 2002 also installed on laptop I got it working (also after some days of trial).
Now with my Qtek9100 nothing happends when I plug in the USB-cable. Well not true, it will connect with an IP-address and I can from AS see the filestructure on my Qtek, BUT nothing starts syncing (calendar, contacts, e-mails,etc.). I watch task-manager but nothing kicks in. Previously with my S100, mapisp32.exe always kicked in and was the magic component between outlook and groupwise. With AS 4.1 everything is dead in task-mgr. I also receive the 85010014-error message sometimes.
Have uninstalled AS 4.1 several times, cleaned out registry of AS keys, rebooted, installed AS again, reinstalled outlook, turned firewall off, turned antivirus off, soft-reseted my qtek, and so on. Have downloaded the swedish version of AS 4.1, since my Qtek has swedish language, and thought that was the reason. But no. Soon out of options and ready to take my new qtek back to the dealer.
Any help from anyone is very much appreciated.
thx in advance.
Peter
----------------------
ROM: 1.3.7.13 SVE
ROM-date: 9/29/05
Radio: 01.04.10
Protocol: 4.0.13.17
Ext Rom: 1.3.7.125
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
ccisn said:
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
Click to expand...
Click to collapse
No, manual sync does nothing.
If I can't find any solution before mid-next-week, I will find a workstation at work and load only the minimal components/applications needed and try to nail down the issue, as a last try. I work with IT myself so I'm not keen to reimage my laptop, there are just too many things to reinstall.
thanks for the advice!
Peter
Active Sync Sync via USB Resolved (well for me anyway)
Over the last month I have not been able to sync my Wizard to my laptop via USB. Via bluetooth worked a treat, but I was not able to upgrade ROM via btooth.
This morning, completely by accident I resolved the issue with USB sync'ing to Active sync 4.1.
This works for me:
1. Connect Wizard to laptop via USB (you will get the usual problem, with ActiveSync saying "Connecting" and nothing else
2. Whilst phone is still connected via USB perform soft reset on phone
3. The laptop system tray should display "Found new USB device" and then say "Pocket PC USB Sync found"
4. When the laptop / pc has finished installing software and displays "Your new hardware is installed and ready to use" Disconnect the USB cable from your Wizard.
5. Wait a couple of seconds and then reconnect your Wizard via USB and hopefully it will work.
Please let me know if this works for anyone else!
One more thing you could try before throwing it back at the salesman is to check your network connections.
Go to Control Panel and select network connections - make sure you are set to view details and look for the "Local Area Connection" that has a description of "Windows Mobile-based Device". On mine it is "Local Area Connection 3". You may have to scroll to the right to see the description.
Right click the relevant connection and then click "properties". Make sure that the following entries ONLY have a tick next to them.
Client for Microsoft Networks
File and Printer Sharing for Microsoft Networks
Internet Protocol (TCP/IP)
For some reason on mine none of them were initially selected :?
Click OK, when I did this it started syncing straight away!
Good luck!
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
s4vva said:
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
Click to expand...
Click to collapse
Hard reset has done the trick, so it turns out all problems may not be down to our pc's......
The same thing happens for me sometimes. What I have found ou this helps.
Unplug pda from sync cable. Kill all active programs on the pda. Plug in sync cable again. Viola! It syncs.
I have the same trouble, activesync just says connecting and thats it, i havent found any particular reason for it. SR does not help, just HR which is kind of overkill. Im really glad for the sprite backup software. I have tried all different things i could think of while i couldnt sync and nothing helped. I have allready about 3 HR after me.
Hi,
If anyone can spare some time to look at my problem.
Basically : I have received my new O2 XDA EXEC and have tried a few times to synchronise it using
- the included 4.0 Activesync
- the download 4.1 Activesync
Problem is : when I plug the USB to the device, it is recognise and Activesync start spinning and displays "Connecting..." but would just keep connecting without moving further (as screenshot below).
I looked for issues like this on various website and here, but nothing really looks like what I am experiencing, anyone has an idea where to go from now ?
I checked
- firewall (activesync is in the list of exception)
- uninstalled activesync, reboot pc, reinstall, reboot pc.. still no luck
- install activesync on a second PC and do the same: no luck
- used a different mini USB cable, no luck so it's not the cable.
Do you think I should send my XDA back ? everything else seems to work (GPRS, Wifi, BT..)
Thanks a lot for your suggestion ?
PS: the device is recognised as I can ping it too from the PC.[/b]
Well you seem to have hit all the usual suspects. Regarding the firewall issue, in ZoneAlarm I also watched the logs, found a blocked connection attempt that seemed to be my device and set that to the trusted/allowed zone which helped back when I was having problems. The next step might be a hard reset on the Exec.
Try disabling your firewall and test the connection.
For some firewalls you have to do more than just allow ActiveSync.
Try diabling the password. That cofused my activesync the first time I tried my replacement handset
Disable firewall completely, than retest if activesync will work. Helps in 99%.
HTH
Chris
I'm currently having "issues" with ActiveSync too. Every time I try to sync when there are more than about 25 changes that need updating, my JasJar decides to open an ActiveSync window on the JJ (for no apparent reason).
It only manages to show the top half of the ActiveSync window (The "Connected" section with the progress bar are missing) then it freezes, requiring me to do a soft reset.
The only way I can currently sync all details successfully is to kill all non-essential processes with a process manager, and remove all today plugins (!), then it works with absolutely no problems. Not a very elegant solution, but it works for now, and as I've tried absolutely everything else I can think of in THIS thread, it'll have to do for now...
it works fine now ! I have disabled the firewall and also ..
uninstall Cisco VPN client, so not sure which one it was that caused the connexion problem.
Thx to all your fast responses.
I have mine Sync successfully after removing the anti-virus software. Not sure whether it works or not to install the anti-virus back on. I have followed all the instruction in Microsoft website, but with Trend Micro installed, it just couldn't Sync. That's why I removed it completely.
Maybe this will help You (or me ) further :
I can sync at home without problems, W-XP ASync 4.1, Internet through a Linksys Firewall/Router.
If I come to the office I get exactly what You have, visible, but no syncing.
I use W-XP there as well, same ASync 4.1, Internet through the Office Network.
When I disconnect the network cable, Microsoft Office will immediately notice and complain. I wait between 30-60 second and ASync will actually connect and sync. It will not sync to a Exchange Server though, as this is disconnected with the cable.
I would have come with this issue here, but probably a little later, as other problems are of higher priority to me now, but maybe this information helps here.
regards,
Ruud
Perhaps this hint may help you under certain conditions: http://forum.xda-developers.com/viewtopic.php?t=39002
regards
df2jh
Hi df2jh,
thanks, interesting read. I was able to solve my issue in the meantime.
My firewall, MS is restricting the programs used by MS ASync and therefore does not allow syncing.
Solution for me :
Disabled processes wcescomm.exe and rapimgr.exe in the Windows Task Manager
Wrote a text-file in the directory where ASync is in !! which will be searched for by the firewall (do not recall the name of this file, but can check it out if somebody needs it.) This file has one entry to disable the firewall in concern of rapimgr.exe.
Then run rapimgr and wcescomm by hand and, WOW, WCESMgr.exe will run itself and syncing it working flawlessly.
What I did not understand until then :
1) this special file should be in the ASync directory, not in the firewall directory
2) this special file is only searched for when ASync is run (PC boot), not when the USB is connected
For me this is solved, though not everything else in my sync problems.
Hope this helps others,
Ruud
Might not be the same issue but you may find my post in this topic of use
http://forum.xda-developers.com/viewtopic.php?p=225939#225939
Might not be the same issue but you may find my post in this topic of use
http://forum.xda-developers.com/viewtopic.php?p=225939#225939
Had same problem on Kaiser and Wizard
I fixed it by going into Settings>Connections>USB to PC (in WM6.1, USB to PC is in system). Uncheck Enable Advanced Network Functionality. Fixed my active sync not connecting problems on both phones.
Hope that helps some of you!
escapemcp
Is there a credible alternative to Activesnc 4.1 anywhere ? I am absolutely sick and tired of this cr*p.
I want to be able to sync calendar, tasks, notes and files - reliably. That's all. That's not too much to ask is it?
Any ideas ?
TIA, DBo.
I'd be interested in one, been looking for a day or two but pretty new to the PPC thing and not making much progress.
Atm the only surefire way to ActiveSync seems to be, soft reset before sync, again after. It's quite a 1 shot deal, once it's synced, it won't again without a soft reset of the PDA. Note: Never needed to restart the PC used, I have tried this, no difference.
Have you read this?
http://forum.xda-developers.com/viewtopic.php?t=41955&highlight=activesync+solution
Solved that problem for me.
reading the other post now ... my activesync kills itself too i need to reboot my pc to make it work again ... apart from that it wont even synch all my contact ... it misses out random ones all the time
Can't tweak my TCP settings
I'd love to do this, but I can't go messing about with the TCP settings on my company laptop. Not if I want to keep my job.
I need a decent alternative to AS 4.1 even if that means AS 4.2
Silentz:
Yeah, tried that (amongst several hundred other things). I already use DrTCP for optimising my lans due to me using gigE with jumbo packets, so am pretty familiar with it on that ground. I also tried many other reg tweaks (on the PC not PPC) regarding networking etc. to no avail.
From all the tests and tweaks I've done I'm no further into solving this issue, which doesn't half stick in my side. PC m$ os with m$ software talking to a PPC with m$ os with m$ software, who the hell is writing this utter drivvle software?
I have concluded however that the PC / ActiveSync 4.1 side of things does not fail or lockup, regardless of reboots or no reboots or net settings used. It is the PPC's running ActiveSync which borks, stalls then grinds to a halt. I suppose it's possible m$ will fix the PC 4.1 software to not bust the PPC but I've also pretty much resided myself to needing a ROM update to fix the PPC half
This of all things annoys me, I've fixed almost everything else wrong with this phone but turning it off on a regular basis just takes the biscuit, like who does that nowadays? :roll:
Yeah that's right - it's the PPC which goes funky, but in my case it was down to the PC (i think) cramming data at it.
If you switch off (untick) all elements of the today screen it also works better, although that's not really a solution!
Microsoft do need to release ActiveSync 4.2 asap.
Yeah, tried all that, I only have MSN on today page anyways but have tried it with nothing. I only sync contacts anyway and even then only about 100 - still hangs if not the first time...
What about this?
Device Manager
Hi,
I was successful in resolving a "stubborn" active Sync, by doing the following:
Remove USB Cable to K-jam.
Open device manager.
Go to Network adapters.
Disabling adapter called: "Windows Mobile Based Device".
Re-enabling adapter called: "Windows Mobile Based Device".
Plugging USB cable back in.
Kind regards
Adrian
I was successful in resolving a "stubborn" active Sync, by doing the following
Click to expand...
Click to collapse
But for how long?
I find that AS is very unstable.
I have installed the latest ROM and still get problems with both my devices.
If I play an MP3 in Windows Media Player, AS drops the connection and I have to unplug my MDA Vario (or my XDA Mini S) and reconnect it again.
If I soft reset for any reason while still connected to AS, it drops the connection and on re-connect it hangs at 'Looking for changes' and I have to re boot the PC to get a connection again.
Other times without warning it will drop the connection and not re-connect without a re-boot of the PC
etc. etc etc.
Fortunately all my contacts, calendar and tasks are held on my PC in Thunderbird (I don't use Outlook) and I have a seperate sync programme for syncing them so I don't need to rely on AS for data sync.
But I do wish there was an alternative for enabling the connection to the PC.
Hi all.
I had ActiveSync setup back in California on my computer, but now that I am at my parents place and have been trying to setup activesync on there computer to sync with my mda.
I had no problems back in Cali, but now when I load ActiveSync and connect the device, etc. it says that device is not connected and therefore I cannot sync. When I plug the device the computer recongizes that there is a windows mobile device, and ActiveSync tries to connect but with no success.
Does anybody know what I should do to fix this problem? I've searched and haven't really found anything specific to my problems, and I really need to be able to sync my mda for I won't be going back to my computer for a while.
Thanx alot
peter
I'd suspect a firewall issue. Use this guide from Microsoft to troubleshoot ActiveSync 4.0/4.1/4.2 USB Connection Troubleshooting Guide
Good luck!
I've already troubleshooted, and we're talking about the firewall for my internet, right? Because if thats the case I've already disabled the firewall for all of my connections. Would there be other types of firewall that I should be aware of?
*I've tried it on another computer in the house, and I get the same problem. It recongizes a windows mobile device is connected, but it won't pick up the usb connection through activesync.
Thanx again
I am having the EXACT same problem... Does anyone know how to fix it???
Does anyone know how to fix it???
i m having the same problem
hi
i upgrade form 1.6 to 2.2, rom available at t-mobile
its fast but active sync turns green then turn off
nothing happenes
the older 1.6 rom was workin fine
well im still having this problem, so if anybody knows who how to fix it im in need of help.
btw... i haven't upgraded my rom yet.
thanx alot
try file/delete mobile device in activesync and see if it still does it.
Anymore tips??? I havent been able to sync for 2 weeks now!!!!!!!!!
I am having the same problem with my MDA. My 8125 never had this problem its quite the PITA.
May not help...
You may have already tried all this...
First, don't use Activesync 4.2. Uninstall it, reboot, and install 4.1. I couldn't get sync with two PCs with 4.2. Removing it is a nuisance since it starts automatically and doesn't have an off selection; I use activesynctoggle.exe to turn it off. I keep activesync around since activesync problems sometimes can be fixed by turning it off and on again.
Second, if you are running zonealarm or another firewall, the procedure for permitting sync is more complicated; see e.g.
http://www.pocketpcfaq.com/raj/ZA.html
Third, remove the connection from the PC (on activesync, File/Remove Connections) and from the PPC (run activesync when not connected and remove), remove activesync from the PC and reinstall, and start fresh. Use a USB cable and don't mess with Bluetooth -- it is *much* more sensitive, as I found out painfully.
Good luck. It is really amazing that microsoft can't make software that syncs two microsoft operating systems, when Palm can make software that syncs windows with the palm OS reliably. Activesync is one of the worst programs I have ever encountered, and the release of 4.2, which seems to work less well than 4.1, is astounding.
Well my device stopped recognizinig my sim car yesterday so my device is worthless.
DOES ANYONE KNOW ANYTHING THAT CAN HELP!!!!?!?!?! I HAVENT SYNCED IN 25 DAYS!!!!!!!!!!!!!!!!!!!
PLEASE HELP!!!!!!!!!!!
A little more info please. Saying you have the exact same problem isn't enough! (trust me, no two people or computers have the same problems, exactly)
Please post what you're doing, AS version, ROM version... actually anything that might help us possibly help you.
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
ROM version 2.25.11.1 WWE
ROM date: 5/11/06
Radio version 02.25.11
Protocol version 4.1.13.12
ExtROM version 2.25.11.102
Did you even try the suggestions I made?
Rjp20 said:
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
Click to expand...
Click to collapse
I have had a similar problem and solved it with those procedures. Activesync is unreasonably sensitive and sometimes removing the program and connection and starting over seems necessary; then it will work until some setting or other gets messed up.
I'm having a similar issue but when I connect my T-Mobile Vario II (HTC Hermes) it starts the process but as soon as it's about to start syncing my PC reboots. I've just got a new laptop and it syncs fine. I've been using ActiveSync for many years and this is the first time I've had this issue. I've also got an Orange SPV C500 (can't remember which HTC device that is) but it's a smartphone and it still syncs fine.
I don't have any software firewall enabled as I'm behind a hardware one. I've looked round the web but no-one seems to have this issue that the system reboots.
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Thanks in advance,
Rob.
I also had a no connection when I first connect to new computer....
Check the network connections, there should be a new network connection created for the computer/pda, check the properties and make sure all checkboxes are selected.
Mine wasn't ticked in the beginning, and was able to sync after I selected all the boxes...
WeeeRob said:
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Rob.
Click to expand...
Click to collapse
Windows XP has an event viewer (Control Panel/Administrative Tools/Event Viewer) that can probably tell you what took down your system. That would help isolate the problem - maybe.
Nothing so far... Does anyone else have any tips...