Hi all
Just looking for some inspiration or help prior to throwing my 9100 (and probably myself at the same time) off the nearest cliff!
I've read all the threads on getting ActiveSync 4.x to work with WM5 but none have seemed to work for me. My problem isn't establishing a partnership - does that fine - it's just that it takes about 2hrs+ to sync my Wizard with Outlook. All the right elements of AS are given the right permissions on my firewall (even tried it with F/W switched off and still no joy!) - just can't figure out why it's taking so long - there's not that much info to sync - in fact, I could probably key it all in manually quicker!
So, unless anyone can suggest otherwise, I figure I've got a couple of options:
1, wait for MS to release their fixed version at the end of November (assuming they do and assuming it fixes the problem - too many assumptions here to get me excited or hopeful!) or
2, buy a BT dongle for my PC and sync over BT instead of USB. Anyone tried this way of syncing? Does it work well?
Kind of last resort really prior to losing my sanity. BTW, this is the only problem/issue I've got with the Wizard (which isn't really a Wizard fault, more Uncle Bill's fault) - it really is a great convergence device!
Thanks for any help.
is your connection from your 9100 straight into the pc or is it via a hub?
also are you connecting using usb 1.1 or 2.0
I have had delay problems since installing zone alarm, sometimes if i disconect the usb at the k-jam end and re-plug in, it then works straight away.
tired both and makes no difference - at the moment it's straight into the pc using usb cable - the usb slots on pc are usb 2, but not sure what speed the cable that's shipped with 9100 is???
have you got zone alarm installed?
nope - norton internet security 2005 with all the latest updates (same goes for XP SP2, Office 2003 SP2, although I have uninstalled the Outlook Junk e-mail filter)
nope - norton internet security 2005 with all the latest updates (same goes for XP SP2, Office 2003 SP2, although I have uninstalled the Outlook Junk e-mail filter)
got rid of norton, found zone alarm much more user friendly, apart from activesync 4.1.
never had problems with activesync 4.0
have you ever tried using bluetooth to sync with pc? small investment = less headache - no?
Try booting in safe mode and see if that makes a difference. If it does, you have something starting up that is causing a problem. I have seen nortons internet security cause problems in the past. When you connect via usb, it actually assigns an ip address and configures a network connection. Network connections are controlled by firewalls. I had probs connecting and turned of my firewall and it didnt make a difference. It was the firewall that was causing the prob. Once I got it setup correctly, IE ALL exe's in activesync folders allowed full access, it worked fine. I also use bluetooth to sync and it is just about as fast. It is slower when installing programs or transferring files, but syncing is no prob. Hope this helps.
John
www.skynetworks.gotdns.com
thanks for the advice - will probably give bluetooth a try - not over concered about security as there's nothing of real value to anyone else on the device.
thanks for the advice - will probably give bluetooth a try - not over concered about security as there's nothing of real value to anyone else on the device.
Related
I have had 3 XDA Execs and two XDA Mini S devices.
I have connected them to a Toshiba laptop running the latest firmware and Windows XP SP2.
I have connected them to a Dell desktop running the latest firmware and Windows 2000 SP4.
In every case, I experienced the following issue - Activesync is unreliable. It will sometimes connect and do a full sync, but more often will fail part way through connecting.
Usually, it will fail to notice that the device has connected at all.
A reboot will usually make the Activesync start to work, but usually the connection is broken before the sync can complete.
I have tried the following:
Disable Windows firewall (no change)
Ensure no other personal firewalls are present (there weren't).
Use ActiveSync 4.1 and 4.0 (no change).
It is now at the point where my current Mini S can't even stay connected long enough to install Microsoft Reader.
3 colleagues with Dell laptops and Minis / Exec devices have also experienced the exact same issue.
Am I really the only one to have expeienced this chronic unreliability issue?
MTU
There are some partially obscure references to the MTU size on the network interface that is created for the Windows Mobile device. Seemingly the default is a whopping 8000 but problems occur with anything over 5000 in practice.
I used DrTCP to identify and set my interfaces to 5000 and this improved stability somewhat but it is still a bit touch and go. Have been too busy to play with winding it down lower but I rather think this would help. I would certainly recommend that you give this a try.
Hope this helps!
Thanks, I'll give that a go. 8000? Usually a TCP/IP MTU is more like 1500... [FX: shakes head]
Usually a TCP/IP MTU is 1492
Hi. I've had problems also with activesync with my XDAII (running WM2005c) and my laptop. I've discovered the problems with synching comes when you're using Outlook 2003 and they usually go away when you use Outlook 2002 or earlier.
Hope that helps.
I am using Dopod838 TC version and Outlook2000 SR-1.
I also experienced some Activesync issue when reconnect to PC after the 1st sync-up(1st sync-up from reset always work). At reconnect and sync, my device go really really really slow, I have to do a reset to fix and sync again.
Upgrade to Activesync 4.1 and take care of the port does not help my case as I can sync once without any issues.
Recently i have installed an application call "Card Expert II" which allows me to switch between USB / Activesync mode. I notes CEII fail to switch to USB mode after disconnect from PC, but after sometimes it do. Then I realize probably something at the background of my PPC is still running which cause this issue.
I try to figure out what in between could help release the sync and at last I figure out if I check the SMS/Email on my today screen and close it again.... Card Expert can switch between USB/Sync mode again. I repeat the same trick and now it can sync without issue ....... Now I am 100% confidence my device will sync again after disconnect from PC.
Now whenever before I connect to PC, I would just click and close the SMS/Email on today screen... It's a bit annoying but this save me from reseting my device each time i try to re-sync up my device. Hope this help.
I have had the same problem with sync., the solution for me is to reboot my PC. So the problem must be there, and I have no clue how to solve it...
My solution is to sync once, then do every other sync via Bluetooth, avoiding the dodgy IP over USB implementation entirely.
Maybe ActiveSync 4.2 will fix it...
Hi,
Have had K-Jam for about a month now. ROM up to date (pending new ROM in next few weeks I believe). Activesync 4.1 installed on WinXPSP2, running Norton Internet Security 2006 (incl firewall etc) on a Vaio Laptop. Out of box the K-Jam synchronised easily and quickly to Outlook through USB, never had any connectivity issues. Synching also worked fine through Bluetooth which I tried only as a test as charging and synching all day was useful at my desk and stopped my speakers making a racket every time the GPRS kicked in to download my email (every 15 mins * 2 accounts). Everything was working perfectly, I was a very happy man and I have to say I am very happy indeed with the K-Jam other than occasional performance issues (bad button/touch screen lag occasionally).
HOWEVER
Firstly, I was hugely disappointed with Activesync 4.1 which seems a big step backwards not least through the loss of useful features such as Backup/Restore. It seems like a nasty cheap alternative to the older Activesync 3.8 which I used happily with my Ipaq for over a year. Nevermind - I bought my own backup software spBackup which runs every night and backs up onto my sd card - a nice feature for when I am travelling without laptop and need to cold boot and restore (something that always worried me with Backup/Restore being based on my PC with AS3.8).
Secondly, the K-Jam hung on an incoming phonecall and the soft reset button would not work. Thank god for spBackup I thought, so did a hard reboot and ran the spBackup executable on the storage card. On restore, the K-Jam looked fine, everything was back to the state it was in at 3am that morning.
BUT
Now, when I plug the USB cable between K-Jam and laptop, Activesync just sits saying "Connecting" with the spinning circle green and never gets any further. I can hear windows detect the device, and the first time I connected it it installed "Generic RDIS device" plus whatever other bits and bobs - so the device is clearly connecting. Activesync just never gets any further than "Connecting". I have searched high and low, but there is nothing other than advice re Windows Firewall (my Norton Firewall for instance). I went to the extent of removing the firewall etc, and have got to the stage that I can confirm that it is not a firewall issue. If I try to get a connection from activesync from the K-Jam, the activesync on the device flashes momentarily and is then in the disconnected stage again. I removed all partnerships from both devices, tried again - no joy. I then tried to synchronise with Bluetooth - Success!
Therefore all is not lost, I can connect with Bluetooth. But it is irritating not being able to connect via USB. My suspicion is that I am going to have to hard reset and reinstall everything once more - but before I go that route does anyone have any advice that may be able to help me?
Thanks.
Try this: http://forum.xda-developers.com/viewtopic.php?t=41955&highlight=activesync+solution
Sounds like exactly the same problem I had. Worth a go, anyway.
Silentz said:
Try this: http://forum.xda-developers.com/viewtopic.php?t=41955&highlight=activesync+solution
Sounds like exactly the same problem I had. Worth a go, anyway.
Click to expand...
Click to collapse
Had a go. No joy unfortunately.
Looking through the forum there are a lot of issues with AS4.1 which fills me with dread...
I'll keep googling and hoping someone else has resolved this issue.
Thanks.
Is there a credible alternative to Activesnc 4.1 anywhere ? I am absolutely sick and tired of this cr*p.
I want to be able to sync calendar, tasks, notes and files - reliably. That's all. That's not too much to ask is it?
Any ideas ?
TIA, DBo.
I'd be interested in one, been looking for a day or two but pretty new to the PPC thing and not making much progress.
Atm the only surefire way to ActiveSync seems to be, soft reset before sync, again after. It's quite a 1 shot deal, once it's synced, it won't again without a soft reset of the PDA. Note: Never needed to restart the PC used, I have tried this, no difference.
Have you read this?
http://forum.xda-developers.com/viewtopic.php?t=41955&highlight=activesync+solution
Solved that problem for me.
reading the other post now ... my activesync kills itself too i need to reboot my pc to make it work again ... apart from that it wont even synch all my contact ... it misses out random ones all the time
Can't tweak my TCP settings
I'd love to do this, but I can't go messing about with the TCP settings on my company laptop. Not if I want to keep my job.
I need a decent alternative to AS 4.1 even if that means AS 4.2
Silentz:
Yeah, tried that (amongst several hundred other things). I already use DrTCP for optimising my lans due to me using gigE with jumbo packets, so am pretty familiar with it on that ground. I also tried many other reg tweaks (on the PC not PPC) regarding networking etc. to no avail.
From all the tests and tweaks I've done I'm no further into solving this issue, which doesn't half stick in my side. PC m$ os with m$ software talking to a PPC with m$ os with m$ software, who the hell is writing this utter drivvle software?
I have concluded however that the PC / ActiveSync 4.1 side of things does not fail or lockup, regardless of reboots or no reboots or net settings used. It is the PPC's running ActiveSync which borks, stalls then grinds to a halt. I suppose it's possible m$ will fix the PC 4.1 software to not bust the PPC but I've also pretty much resided myself to needing a ROM update to fix the PPC half
This of all things annoys me, I've fixed almost everything else wrong with this phone but turning it off on a regular basis just takes the biscuit, like who does that nowadays? :roll:
Yeah that's right - it's the PPC which goes funky, but in my case it was down to the PC (i think) cramming data at it.
If you switch off (untick) all elements of the today screen it also works better, although that's not really a solution!
Microsoft do need to release ActiveSync 4.2 asap.
Yeah, tried all that, I only have MSN on today page anyways but have tried it with nothing. I only sync contacts anyway and even then only about 100 - still hangs if not the first time...
What about this?
Device Manager
Hi,
I was successful in resolving a "stubborn" active Sync, by doing the following:
Remove USB Cable to K-jam.
Open device manager.
Go to Network adapters.
Disabling adapter called: "Windows Mobile Based Device".
Re-enabling adapter called: "Windows Mobile Based Device".
Plugging USB cable back in.
Kind regards
Adrian
I was successful in resolving a "stubborn" active Sync, by doing the following
Click to expand...
Click to collapse
But for how long?
I find that AS is very unstable.
I have installed the latest ROM and still get problems with both my devices.
If I play an MP3 in Windows Media Player, AS drops the connection and I have to unplug my MDA Vario (or my XDA Mini S) and reconnect it again.
If I soft reset for any reason while still connected to AS, it drops the connection and on re-connect it hangs at 'Looking for changes' and I have to re boot the PC to get a connection again.
Other times without warning it will drop the connection and not re-connect without a re-boot of the PC
etc. etc etc.
Fortunately all my contacts, calendar and tasks are held on my PC in Thunderbird (I don't use Outlook) and I have a seperate sync programme for syncing them so I don't need to rely on AS for data sync.
But I do wish there was an alternative for enabling the connection to the PC.
Hi
Activesync just decided to stop working yesterday on my O2 XDA Mini S.. I've uninstalled and reinstalled both Activesync and Outlook 2003, and even resorted to hard resetting the device, but I still get a hang when I connect!!!
Any ideas?
Shaun
make a new partenship but do not tick the media box.something to do with media player. i have been having the problem for over a week.
whatever you do do not open media player wile sync as i will desconect the device.let me know how you get on.
I have been having this problem regularly with both my phones since I got my XDA mini S and MDA Vario 2 weeks ago.
I had the PPC6700 for a couple days (switched from cingular to sprint - hated their service so now am back to cingular) now I have the 8125 and with both devices 4.1 blows - very tricky to configure. My issues came from VPN mostly - I say mostly cause it still doesnt like to connect when I have that tunnel in place. What I determined to work on both handsets was sync the cal, inbox, tasks, and contacts with exchange and sync NOTHING locally. If I need to transfer files I do it via mSD card - apps install regardless. This is a high level accounting of what I went through, but will go through more detail if you want.
I had the same problem also some weeks back. It ended up being due to the software firewall I am running (sygate). I've discovered that I have to completely exit the firewall app (rather than just allow all traffic) if I want to sync properly - a real pain!
Based on a bit of hunting I've found out that the activesync connection works by creating a software USB - tcpip bridge. The first step on connecting the win mobile is to assign an ip address to the connection. This proceeds ok with the firewall app running as it works via the normal DHCP port numbers. Once this is done activesync knows there is a win mobile machine connected and starts trying to commumicate with it ( connected..... looking for changes). The problem now is that the communication between activesync and the machine occurs via different ports number *which are blocked by the firewall app*. This also explains why you can't sync when you have a VPN active - the VPN blocks the traffic from the 'extra' local address created by the activesync DHCP request and activesync consequently can't tell the win mobile is attached.
What I don't understand is why if doesn't work when I tell the firewall to "allow all"! There is a document on microsoft's site explaining how to go about setting up a firewall to allow this traffic (google for 'activesync firewall problem'). Problem is that it doesn't seem to work with the sygate firewall as far as I can tell...... any ideas anyone?
does anyone know if you can install IPX/SPX on the handheld?
Hi
Thanks but still not working... I am not running my VPN (I know Activesync never works with my VPN). I do not have any firewall software in place, and the windows firewall is off. My antivirus is disabled when I sync, and I have a valid, DHCP assigned IP address.
I am not syncing media - in fact the *only* item I have ticked is files.
I can explore the pocketpc OK, so I know its physically connecting.
:-(
Any other ideas?
Shaun
this page may help
http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm
Hi
Sigh, still no luck. So far I have:
1. Repaired and then Reinstalled Activesync 4.1
2. Repaired and then Reinstalled Outlook 2003
3. Repaired mapi32.dll
4. Hard reset the XDA mini S
5. Deleted all partnerships, both sides
6. Changed sync options to only sync favorites
7. Reapplied XP SP2 and patches
8. Removed all firewalls and antivirus software
9. Tried different cables, and IR connections
Yet still, no matter what I do, I get "Looking for changes" forever. Exporing the PPC is fine.
I cannot reinstall XP - this is an company laptop, and MIS do not allow us to reinstall our OS, and as they don't support the XDA, they won't reinstall XP either....
So I'm left with no options - back to a palm!?
Regards
Shaun
Sorted!!
Phew
After random playing I found it... It hangs if "favorites" is n the sync list. If I delete the partnership and when the wizard restarts, untick favorites, it syncs OK.
In all my testing, I had stupidly assumed things like files and favorites would work...
So... I think I'll live without favorites.
Shaun
U must have stuff which is not uninstalled properly. try unchecking everything for SYNC except Files.
I have experienced the same problem. Activesync worked great out of the box, but several days later, began hanging up on "Looking for Changes". Nothing that I tried fixed the problem, including reinstallation, deletion of devices from both sides, syncing with BT, etc. Finally, I gave up and did a hard reset, and Activesync immediately worked perfectly again! I assume that one or more programs I installed on the MDA along the way was causing the problem, and I am now going to methodically reinstall apps until I find the culprit. I will post again when I identify the guilty party.
had the same problems, tried all the standard solutions and nothing fixed the hanging on sync issue...
until i plugged the phone into the usb add-on card instead of plugging in to the motherboard's usb ports.
haven't had any problems since!
Had about the same problem.
Just synchronized once, and on a second connection hung on connecting or looking for changes. Tried everything I could think of.
Last resort was a cold reboot without restoring the backup..
Then synchronizing worked like a charm.
Put back the backup and it still works.
Why? Beats me........
Edit
It stopped functioning again. Have to do a soft reset and delete the partnership on th PC.
Then it will sync for as long as the Wizard stays in the cradle.
When I take it out it won't sync for a second time
Hangs on looking for changes
I find it does this everytime, without fail, if outlook is open when I connect.
If it's closed, and I connect, no problem.
Another quirk is media player.
When the device is connected and you open a movie file in WMP. If you close WMP, the file continues playing (in audio at least). Disconnect the device, no problem.
Works now
Hi,
I had same problem.
I was using Zone Alarm and after I configured it right it worked.
I had to upgrade to pro
Microsoft has got a nice page that explains it for different firewalls.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
I do not really understand why it does work now when it didn't when I just diabled the windows firewall or later the ZoneAlarm firewall. But it works now.
Greetz,
Pfeffa-rah
I also had all kind of troubles trying to sync via USB. Now I sync via BT and it works pretty well so far. No need to disable the firewall, no hanging, etc. But I only sync the Outlook stuff, no files or favorites.
Bogus said:
I had the same problem also some weeks back. It ended up being due to the software firewall I am running (sygate). I've discovered that I have to completely exit the firewall app (rather than just allow all traffic) if I want to sync properly - a real pain!
Based on a bit of hunting I've found out that the activesync connection works by creating a software USB - tcpip bridge. The first step on connecting the win mobile is to assign an ip address to the connection. This proceeds ok with the firewall app running as it works via the normal DHCP port numbers. Once this is done activesync knows there is a win mobile machine connected and starts trying to commumicate with it ( connected..... looking for changes). The problem now is that the communication between activesync and the machine occurs via different ports number *which are blocked by the firewall app*. This also explains why you can't sync when you have a VPN active - the VPN blocks the traffic from the 'extra' local address created by the activesync DHCP request and activesync consequently can't tell the win mobile is attached.
What I don't understand is why if doesn't work when I tell the firewall to "allow all"! There is a document on microsoft's site explaining how to go about setting up a firewall to allow this traffic (google for 'activesync firewall problem'). Problem is that it doesn't seem to work with the sygate firewall as far as I can tell...... any ideas anyone?
Click to expand...
Click to collapse
First of all you have to open the ports in the sygate firewall like microsoft describes (http://www.microsoft.com/windowsmobile/help/activesync/sygate.mspx)
For getting the synchronization to run with the sygate firewall it seems to be necessary to change the maximum tcp ip packet size (MTU).
You have to change the RNDIS driver settings in the mobile phones registry as well. Use a regedit tool like PHM Registry Editor:
Here are the settings to be added (or to be changed respectively):
Key: HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\RNDIS
Name of the Value to add: MTU
Type : DWORD
Data: 1514 (Value is Decimal)
Name of Value to add: MaxOutTransfer
Type: DWORD
Data: 1642 (Value is Decimal)
After a reset my Prophet (XDA Neo) synchronized well with active sygate firewall!
had the same problem
I had the same problem when i first got my mda. It didn't even work off the bat. I noticed it was my computer because i tried it at work and it worked perfectly. I called everybody and tried everything you can possibly imagine. In the end i said the hell with it and i reinstalled my OS. Now its working like a charm. Don't what caused it but I haven't had it since.
firewall
I had this same problem and i had to go open up some ports in my windows xp firewall, once i did this, it worked just fine.
if you read the trouble shooting steps that come with the program it tells you that.
-Chuck
Hi all.
I had ActiveSync setup back in California on my computer, but now that I am at my parents place and have been trying to setup activesync on there computer to sync with my mda.
I had no problems back in Cali, but now when I load ActiveSync and connect the device, etc. it says that device is not connected and therefore I cannot sync. When I plug the device the computer recongizes that there is a windows mobile device, and ActiveSync tries to connect but with no success.
Does anybody know what I should do to fix this problem? I've searched and haven't really found anything specific to my problems, and I really need to be able to sync my mda for I won't be going back to my computer for a while.
Thanx alot
peter
I'd suspect a firewall issue. Use this guide from Microsoft to troubleshoot ActiveSync 4.0/4.1/4.2 USB Connection Troubleshooting Guide
Good luck!
I've already troubleshooted, and we're talking about the firewall for my internet, right? Because if thats the case I've already disabled the firewall for all of my connections. Would there be other types of firewall that I should be aware of?
*I've tried it on another computer in the house, and I get the same problem. It recongizes a windows mobile device is connected, but it won't pick up the usb connection through activesync.
Thanx again
I am having the EXACT same problem... Does anyone know how to fix it???
Does anyone know how to fix it???
i m having the same problem
hi
i upgrade form 1.6 to 2.2, rom available at t-mobile
its fast but active sync turns green then turn off
nothing happenes
the older 1.6 rom was workin fine
well im still having this problem, so if anybody knows who how to fix it im in need of help.
btw... i haven't upgraded my rom yet.
thanx alot
try file/delete mobile device in activesync and see if it still does it.
Anymore tips??? I havent been able to sync for 2 weeks now!!!!!!!!!
I am having the same problem with my MDA. My 8125 never had this problem its quite the PITA.
May not help...
You may have already tried all this...
First, don't use Activesync 4.2. Uninstall it, reboot, and install 4.1. I couldn't get sync with two PCs with 4.2. Removing it is a nuisance since it starts automatically and doesn't have an off selection; I use activesynctoggle.exe to turn it off. I keep activesync around since activesync problems sometimes can be fixed by turning it off and on again.
Second, if you are running zonealarm or another firewall, the procedure for permitting sync is more complicated; see e.g.
http://www.pocketpcfaq.com/raj/ZA.html
Third, remove the connection from the PC (on activesync, File/Remove Connections) and from the PPC (run activesync when not connected and remove), remove activesync from the PC and reinstall, and start fresh. Use a USB cable and don't mess with Bluetooth -- it is *much* more sensitive, as I found out painfully.
Good luck. It is really amazing that microsoft can't make software that syncs two microsoft operating systems, when Palm can make software that syncs windows with the palm OS reliably. Activesync is one of the worst programs I have ever encountered, and the release of 4.2, which seems to work less well than 4.1, is astounding.
Well my device stopped recognizinig my sim car yesterday so my device is worthless.
DOES ANYONE KNOW ANYTHING THAT CAN HELP!!!!?!?!?! I HAVENT SYNCED IN 25 DAYS!!!!!!!!!!!!!!!!!!!
PLEASE HELP!!!!!!!!!!!
A little more info please. Saying you have the exact same problem isn't enough! (trust me, no two people or computers have the same problems, exactly)
Please post what you're doing, AS version, ROM version... actually anything that might help us possibly help you.
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
ROM version 2.25.11.1 WWE
ROM date: 5/11/06
Radio version 02.25.11
Protocol version 4.1.13.12
ExtROM version 2.25.11.102
Did you even try the suggestions I made?
Rjp20 said:
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
Click to expand...
Click to collapse
I have had a similar problem and solved it with those procedures. Activesync is unreasonably sensitive and sometimes removing the program and connection and starting over seems necessary; then it will work until some setting or other gets messed up.
I'm having a similar issue but when I connect my T-Mobile Vario II (HTC Hermes) it starts the process but as soon as it's about to start syncing my PC reboots. I've just got a new laptop and it syncs fine. I've been using ActiveSync for many years and this is the first time I've had this issue. I've also got an Orange SPV C500 (can't remember which HTC device that is) but it's a smartphone and it still syncs fine.
I don't have any software firewall enabled as I'm behind a hardware one. I've looked round the web but no-one seems to have this issue that the system reboots.
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Thanks in advance,
Rob.
I also had a no connection when I first connect to new computer....
Check the network connections, there should be a new network connection created for the computer/pda, check the properties and make sure all checkboxes are selected.
Mine wasn't ticked in the beginning, and was able to sync after I selected all the boxes...
WeeeRob said:
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Rob.
Click to expand...
Click to collapse
Windows XP has an event viewer (Control Panel/Administrative Tools/Event Viewer) that can probably tell you what took down your system. That would help isolate the problem - maybe.
Nothing so far... Does anyone else have any tips...