Related
Hi all. Heard there's a newer version of ActiveSync on another thread. namely Activesync 4.1. Can anyone give any feedback confirming this (although I think it's still in Beta stage). If so, isn't it worth a try given the problems encountered on the Universal using just Activesync 4.0.
Someone must know!
Here's the link: http://forum.xda-developers.com/viewtopic.php?t=28535
Well I have it installed and I don't see anything different. Probably bug fixes. Won't harm to upgrade.
i have 4.1 running, dont know if its connected to the activesync on universal always restarting but i can only sync with pc if i have the universal powered off, then when plugging it in i see the orange power led kick in, 10secs ish later active sync will start,
if i plug in when switched on i get a error bubble on pc saying i have a malfunctioning device, power off and plug back in, wait a bit, i have a working syncing device. wierd!!!!
i only got usb1 on this lappy and my other has 2.0 had same problem, so i dont think its a usb problem
no bugs on my side
i installed 4.1, and it works like a charm on both pda2k and universal
mikeycollins13 said:
It took a while to work out, but here it is: Skype works fine as long Activesync is not on. In the old machines, AS would kick in and appear in the memory only after you sync'd. Here it comes up automatically, whether you sync or not. In fact, you should see Active sync running in the background virtually always.
Clicking on the memory you'll see its always on, you press stop, and Skype works for 5-10 minutes, until AS turns tiself back on.
Any fixes for this in the registry?
Click to expand...
Click to collapse
Great stuff Nabil! Now, can someone please check if there are still issues with ActiveSync causing problems with Skype? I would do it, but I don't have my Universal yet! Waiting on the MDA Pro or Exec.
I'm not entirely happy that Activesync is workig the way it was intended & as I was unable to get this confirmed from several forum members, I ventured out of Xda developers.com to seek confirmation of my doubts.
I ended up reading a review of the new Dell Axim X51v Pocket PC, which as you may or may not know, uses WM 5.0 (but less the phone side of things). Not exactly to my surprise, i found that even in non-phone PPC devices, Active sync is a bit of a cause for concern!
Read here: Review of Dell Axim x51v PPC (WM 5.0)
Windows Mobile 5: Not All is Golden
I won't delve too much into Windows Mobile 5 in this review, since I'm focusing on the X51v itself, but I found Windows Mobile 5 very painful in two ways when I was setting up and using the X51v. First, after a hard reset I connected the X51v to my PC and set up a new partnership. ActiveSync 4.0 has a different partnership wizard if you have a Windows Mobile 5 device, and it's quite intuitive. I entered my hosted Exchange account information, then watched as basically nothing happened. The X51v synchronized with my desktop PC, but coughed up an 0x85020006 error when the device tried to sync with the Exchange server. ActiveSync 4.0 removes the option for Internet passthrough - I assumed that meant it was automatic, but after fighting with Connection Manager on the X51v for 15 minutes I gave up and disconnected. I turned on WiFi, and the X51v saw my access point - I entered my WEP key, started ActiveSync, and clicked sync. It worked! Within a few minutes I had all my data on the X51v - but why wouldn't the synchronization work in the cradle? I have no idea, but it's a serious problem.
Later, I wanted to see if a particular ActiveSync bug had been fixed: I've always had the problem where, after a backup and restore, the Pocket PC has been unable to synchronize against the Exchange server again. Only a hard reset would allow the Pocket PC to sync again. On the X51v, I did a backup using the included application, then hard reset and a restore. I restore the device, then after a soft reset I noticed the date was wrong. No matter, I fixed it and started a sync session. Much to my delight, the sync actually started, which is sometime that wouldn't have happened under Windows Mobile 2003SE.
My delight turned to disbelief, then anger as I saw what ActiveSync was doing: it duplicated 900 contacts, 50 emails, and 6 months worth of appointments! No warning, no "Replace, Remove, or Combine" dialogue box, simply a duplication. It will take me hours to fix this manually, unless I can find a tool to remove duplicates. I have memories of such a tool, but at this point I haven't had time to track one down. Any suggestions for one that will work with Outlook 2003 and an Exchange server? I'm unsure as to whether this is a problem with Dell's backup application, or with ActiveSync. The bottom line is that in this instance Exchange ActiveSync remains broken after a restore - and I'd rather have it break completely then duplicate all my data, so from my point of view it's actually gotten worse. I didn't think that was even possible!
Suffice it to say that while Windows Mobile 5 brings with it several key advantages - persistent storage is amazingly helpful - my experience with it so far has been mixed (WMP 10 Mobile retains its horrible library functions), and I have no shortage of feedback for Microsoft at the MVP Summit coming up in a few weeks. Windows Mobile 5 feels like one step forward and two sideways.
End of this part of the review. Full Review here: http://www.pocketpcthoughts.com/articles.php?action=expand,43092&start=2
What do you guys think? I think quite a few problems Universal owners are experiencing will dissapear once MS fix their ActivShite application!
Hi all
Just looking for some inspiration or help prior to throwing my 9100 (and probably myself at the same time) off the nearest cliff!
I've read all the threads on getting ActiveSync 4.x to work with WM5 but none have seemed to work for me. My problem isn't establishing a partnership - does that fine - it's just that it takes about 2hrs+ to sync my Wizard with Outlook. All the right elements of AS are given the right permissions on my firewall (even tried it with F/W switched off and still no joy!) - just can't figure out why it's taking so long - there's not that much info to sync - in fact, I could probably key it all in manually quicker!
So, unless anyone can suggest otherwise, I figure I've got a couple of options:
1, wait for MS to release their fixed version at the end of November (assuming they do and assuming it fixes the problem - too many assumptions here to get me excited or hopeful!) or
2, buy a BT dongle for my PC and sync over BT instead of USB. Anyone tried this way of syncing? Does it work well?
Kind of last resort really prior to losing my sanity. BTW, this is the only problem/issue I've got with the Wizard (which isn't really a Wizard fault, more Uncle Bill's fault) - it really is a great convergence device!
Thanks for any help.
is your connection from your 9100 straight into the pc or is it via a hub?
also are you connecting using usb 1.1 or 2.0
I have had delay problems since installing zone alarm, sometimes if i disconect the usb at the k-jam end and re-plug in, it then works straight away.
tired both and makes no difference - at the moment it's straight into the pc using usb cable - the usb slots on pc are usb 2, but not sure what speed the cable that's shipped with 9100 is???
have you got zone alarm installed?
nope - norton internet security 2005 with all the latest updates (same goes for XP SP2, Office 2003 SP2, although I have uninstalled the Outlook Junk e-mail filter)
nope - norton internet security 2005 with all the latest updates (same goes for XP SP2, Office 2003 SP2, although I have uninstalled the Outlook Junk e-mail filter)
got rid of norton, found zone alarm much more user friendly, apart from activesync 4.1.
never had problems with activesync 4.0
have you ever tried using bluetooth to sync with pc? small investment = less headache - no?
Try booting in safe mode and see if that makes a difference. If it does, you have something starting up that is causing a problem. I have seen nortons internet security cause problems in the past. When you connect via usb, it actually assigns an ip address and configures a network connection. Network connections are controlled by firewalls. I had probs connecting and turned of my firewall and it didnt make a difference. It was the firewall that was causing the prob. Once I got it setup correctly, IE ALL exe's in activesync folders allowed full access, it worked fine. I also use bluetooth to sync and it is just about as fast. It is slower when installing programs or transferring files, but syncing is no prob. Hope this helps.
John
www.skynetworks.gotdns.com
thanks for the advice - will probably give bluetooth a try - not over concered about security as there's nothing of real value to anyone else on the device.
thanks for the advice - will probably give bluetooth a try - not over concered about security as there's nothing of real value to anyone else on the device.
Hi. This has worked for me, and solved a massive problem. Hope it helps someone else too.
Step 1:
Ensure you are trying to fix the same problem as I was by looking at the symptoms, which were:
- HTC Wizard synchronizes OK when you plug it in the first time
- It stays in sync if you leave it plugged in
- If you unplug it and then plug it back in at any time later, XDA goes s-l-o-o-o-w and then freezes and will NOT re-sync
- If you unplug it and soft reset before reconnecting then it's fine
Essentially, the Wizard was requiring a soft reset between every connection to the USB cable, or it would crash and require a reset anyway!
These issues have been discussed in about 10 threads on this board, and on pretty much every other resource for Wizards and Pocket PC devices on the net. I was, however, totally unable to find something like this which directly addressed the problem.
Step 2:
Download a program called Dr. TCP from here: http://www.dslreports.com/drtcp
Run it to open a dialog box with loads of fields with strange techy names... no, i didn't understand it either. However, I've been searching the net for days and I found an article here: http://www.pcworld.idg.com.au/index.php/id;504222574;fp;2;fpid;1277378924 which told me how to work the numbers out...
In the bottom drop-down box, select "Windows Mobile-based Device" and enter 1492 in the box next to that. That's your maximum "MTU".
Here are the settings which work for me (from the top). If i don't mention a setting, I didn't change it!
Tcp Recieve Window: 261360
Dial Up (RAS) MTU: 1492
Path MTU Discovery: Yes
Save and Exit Dr. Tcp.
Step 3:
You need to open "Network Connections"... in XP, that's Start > Connect To > Show All Connections. I'm sure you can find it yourself. Anyway there should be an icon called "Local Area Connection (x)" with "Wireless Mobile-based Device" written in grey underneath.
Right click on that and select DISABLE. This will close your USB connection to your Wizard so those MTU settings can be applied.
Now unplug your Wizard from its cable. Here, I tried right clicking on the connection and selecting "Enable", but it just errored. So you need to unplug it.
Step 4:
Reconnect and see what happens. I am now happily disconnecting and reconnecting as many times as i like and it just keeps on synchronising itself. MAMMA MIA!
If this solves your nasty "i need to reset every time I disconnect" problems then please post here to say so. If it doesn't work then post here also, I guess. If this is a solution for you then credit for this is not mine - it's just the sum total of a lot of searching across this and other forums, websites and message boards. THANKS!
not working
These steps did not work for me.
I still have to reset the device otherwise I get this message after about 5 minutes.
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
It appears to be only a problem syncing as I can still explore the device.
well...
...that's depressing. I genuinely thought that would work for other people too.
Did you read that PCWorld article I linked to? it explains how I got those numbers... they could be different for you, perhaps?
I'll keep thinking...
I did not look at the article. I'm having other issues trying to get my 2 computers synced with my mobile device http://forum.xda-developers.com/viewtopic.php?p=234189. Once I get those resolved I can try some different things.
On my home computer I am only synchronizing favorites and files and it doesn't appear to be a problem.[/url]
Oh right ok. I read your other post too, but I only have 1 PC for home and work so i can't help with that.
Has anyone else tried this?
I am no longer having the problem since I fixed my other sync issue (multiple computers issue). I had reinstalled activesync and did a hard reset on my device so maybe something else got cleared up. I am also having much better luck with the way my device is running. Before I was getting frequent slowdowns and lockups. I am a much happier customer and will be sticking with my cingular 8125. I just love all the features, but the activesync issues and slowness was starting to get to me. I'm so glad it is all behind me now and I can start to really enjoy the thing. Although I have yet to connect my bluetooth headset, that may have caused me issues too. Sorry I couldn't be more help testing this out.
I and a work college have had this problem on both our systems and found that it was being caused by Avantgo.
It would work fine and sync every time for days until we installed Avantgo.
After these we both had the symptoms you describe in the first post until we did a hard reset and re installed everything except Avantgo, it was then fine again. As a test I then reinstalled it and it started not syncing again, my college who has not reinstalled it has had no further problems.
I have now been running for 3 weeks with no problems and no Avantgo.
If you have it installed it may be worth trying it without for a wile and see if it helps.
Didn't work for me. Still no connection when plugging in for the 2nd time. MTU value changes back to blank when opening the Dr.TCP again, the other values are ok though. But thanks anyway for the hints!
Greetings,
Andreas
Didn't work for me neither...
just to check (i know this sounds daft) but you did DEFINITELY press the SAVE button in Dr TCP before you pressed the EXIT button? can't imagine why it wouldn't store the data.
aaaaaaaaanyway i guess it's not the ubersolution i thought it was
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Any updated? I'm having this same problem, except my device won't connect at all! Even after a reset. It connected once and that was it.
Hi Silentz,
sure, I saved the settings. I'll try the ActiveSync clean install-method and report the results. 'Hope that MS will put out an update or better version soon! Rumours out there?
Greetings,
Andreas
tried and failed...
tried the above TCP solution- Not working for me either...
Found best solution. Go try the latest imate rom. You can then plug out/in the cable as many times as you want & it'll just work fine.
Bebbo said:
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Click to expand...
Click to collapse
It seems to be as soon as you access the internet through the passthru connection on Activesync. So installing AvantGo/PocketWeather might explain this to a certain degree as they may be accessing the internet.
Incidentally, how could Microsoft have stuffed up so badly with Activesync? It's a tiny program but works so badly - Couldn't a third party come up with a different version of Activesync or something? I'd pay for it if it worked better than this crock!
Just for info, the latest iMate ROM (With Push Email) does indeed seem to fix this issue. Obviously it was with the WM5 side rather than anything that could be fixed on the PC side.
My Active-sink probelms disappeared since upgrade to the latest iMate ROM. Has been working like a charm with all apps and utilities installed, Tweaks2k2, Spb Pocket Plus, Pocket Informant, Worldmate Pro, etc...
told you it works
cheers
I am running the 2.08 (Qtek test) rom and have this issue since last friday. before that never had it!!
What I changed on thursday was: enable exchange server sync and use it. because push-email si no solution for me I just disabled it and dropped the association.
Then (on friday) the trouble started.
I tried DrTCP...and ended up with a broken netlogon (secure client) service on the pc. The IS solution for that was a new image . . thank you very much.
I am back on track with the pc now, but AS still slows down my device.
Are any of you having this trouble using or have used:
-Push email
-Blackberry
What is the amount of free program memory on your device? Mine is around 6MB (probably caused by Blackberry install which I cant remove). . . .
Is there a credible alternative to Activesnc 4.1 anywhere ? I am absolutely sick and tired of this cr*p.
I want to be able to sync calendar, tasks, notes and files - reliably. That's all. That's not too much to ask is it?
Any ideas ?
TIA, DBo.
I'd be interested in one, been looking for a day or two but pretty new to the PPC thing and not making much progress.
Atm the only surefire way to ActiveSync seems to be, soft reset before sync, again after. It's quite a 1 shot deal, once it's synced, it won't again without a soft reset of the PDA. Note: Never needed to restart the PC used, I have tried this, no difference.
Have you read this?
http://forum.xda-developers.com/viewtopic.php?t=41955&highlight=activesync+solution
Solved that problem for me.
reading the other post now ... my activesync kills itself too i need to reboot my pc to make it work again ... apart from that it wont even synch all my contact ... it misses out random ones all the time
Can't tweak my TCP settings
I'd love to do this, but I can't go messing about with the TCP settings on my company laptop. Not if I want to keep my job.
I need a decent alternative to AS 4.1 even if that means AS 4.2
Silentz:
Yeah, tried that (amongst several hundred other things). I already use DrTCP for optimising my lans due to me using gigE with jumbo packets, so am pretty familiar with it on that ground. I also tried many other reg tweaks (on the PC not PPC) regarding networking etc. to no avail.
From all the tests and tweaks I've done I'm no further into solving this issue, which doesn't half stick in my side. PC m$ os with m$ software talking to a PPC with m$ os with m$ software, who the hell is writing this utter drivvle software?
I have concluded however that the PC / ActiveSync 4.1 side of things does not fail or lockup, regardless of reboots or no reboots or net settings used. It is the PPC's running ActiveSync which borks, stalls then grinds to a halt. I suppose it's possible m$ will fix the PC 4.1 software to not bust the PPC but I've also pretty much resided myself to needing a ROM update to fix the PPC half
This of all things annoys me, I've fixed almost everything else wrong with this phone but turning it off on a regular basis just takes the biscuit, like who does that nowadays? :roll:
Yeah that's right - it's the PPC which goes funky, but in my case it was down to the PC (i think) cramming data at it.
If you switch off (untick) all elements of the today screen it also works better, although that's not really a solution!
Microsoft do need to release ActiveSync 4.2 asap.
Yeah, tried all that, I only have MSN on today page anyways but have tried it with nothing. I only sync contacts anyway and even then only about 100 - still hangs if not the first time...
What about this?
Device Manager
Hi,
I was successful in resolving a "stubborn" active Sync, by doing the following:
Remove USB Cable to K-jam.
Open device manager.
Go to Network adapters.
Disabling adapter called: "Windows Mobile Based Device".
Re-enabling adapter called: "Windows Mobile Based Device".
Plugging USB cable back in.
Kind regards
Adrian
I was successful in resolving a "stubborn" active Sync, by doing the following
Click to expand...
Click to collapse
But for how long?
I find that AS is very unstable.
I have installed the latest ROM and still get problems with both my devices.
If I play an MP3 in Windows Media Player, AS drops the connection and I have to unplug my MDA Vario (or my XDA Mini S) and reconnect it again.
If I soft reset for any reason while still connected to AS, it drops the connection and on re-connect it hangs at 'Looking for changes' and I have to re boot the PC to get a connection again.
Other times without warning it will drop the connection and not re-connect without a re-boot of the PC
etc. etc etc.
Fortunately all my contacts, calendar and tasks are held on my PC in Thunderbird (I don't use Outlook) and I have a seperate sync programme for syncing them so I don't need to rely on AS for data sync.
But I do wish there was an alternative for enabling the connection to the PC.
Sorry in advance for another AS issue. However, search as I may, I couldn't loacte anything like this...
Anyhow, my T-mobile MDA (US) has about driven me nuts with this issue. I was able to sync successfully a few times. However, now when I plug in the MDA via USB (direct, not through any hub), it will connect but when the device starts to sync, I get the following error from ActiveSync:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync troubleshooter in Microsoft ActiveSync help on your desktop computer".
I've uninstalled activesync, deleted all registry entries, reinstalled, ensured proper firewall configuration, changed com ports, disabled my internal WLAN card and BT card...and nothing. Short of a hard-reset, I am at a total loss.
Has anyone else experienced this issue? Any work-arounds?
try to install everything again and don't plug it on the usb hub...coz power is not sufficient on a usb hub .. just try.
I'm getting the same error exactly on my Cingular 8125. plugged into pc directly via USB, tried reinstalling AS several times to no avail. Please help. I don't want to have to hard reset. :? Thanks
As I mentioned in my OP, there is no USB hub involved in my setup. This is a direct USB connection from my PC to the MDA.
ooppppssss
hehehe.. Are you syncing via the cradle or a hotsync cable ?. Sometimes if the cable is also charging, the connection is not sucessfull until it's fully charge and the top light is green.
I've had this problem myself before now.
Rockshow...are you also running SPB Weather?
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Firewall
Hi,
Do you use a firewall (Windows XP or other one)
If so, check this out.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
It worked for me!
grtz,
Pfeffa-rah
I'm also facing the same problem with my tmobile-mda(us). I had spbplus but after this problem, uninstalled it. but the problem still exists.. any help ?
i noticed 2 things with my sync problems which are now resolved. one problem was with softick card export, it was causing some errors which were gone when i uninstalleed it. but then had another problem, it would disconnect while syncing randomly. i found out that my cable was damaged(some dirt was in the connector which thankfully ruined the cable and not the phone part) also when u first connect ur device it shows that network connection in the taskbar with the bouncing yellow ball. if u right click it and click on repair that helps some time.
RoCkShOw said:
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Click to expand...
Click to collapse
What's the significance of PSB Weather? I've had sync problems, some days it works some days it doesn't. I can cope with that, but sometimes SPB weather doesn't update it self for days, which is a bit of a pain!
Incidentally I recently hard-reset my device, reinstalled SPB Weather and can nolonger select the option of syncing from weather.com, which limits my choic of available cities. Any ideas?
RoCkShOw said:
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Click to expand...
Click to collapse
What's the significance of PSB Weather? I've had sync problems, some days it works some days it doesn't. I can cope with that, but sometimes SPB weather doesn't update it self for days, which is a bit of a pain!
Incidentally I recently hard-reset my device, reinstalled SPB Weather and can nolonger select the option of syncing from weather.com, which limits my choic of available cities. Any ideas?
Try killing and restarting activesync on the phone. I've only had that problem once and that sorted it.
I had the same problem.
Found out it was my virus protection (TrendMicro PC-Cillin) When I disable my virus protection it syncs, otherwise it only connects and then gives the error you described.
I had the exact same problem untill a few minutes ago when I did a hard reset. I back up my all my data using Sprite but when I restored it gave me the same error message. I gave up and did another hard resetjavascript:emoticon(':x')
Mad. Right now I'm reinstalling all my programs. I would love to know how to fix this without a hard reset just in case it happens again....javascript:emoticon('')
Crying or Very sad
Hi:
Having here the same problem. Still looking for a solution... ANYBODY??
fadewiles said:
Sorry in advance for another AS issue. However, search as I may, I couldn't loacte anything like this...
Anyhow, my T-mobile MDA (US) has about driven me nuts with this issue. I was able to sync successfully a few times. However, now when I plug in the MDA via USB (direct, not through any hub), it will connect but when the device starts to sync, I get the following error from ActiveSync:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync troubleshooter in Microsoft ActiveSync help on your desktop computer".
I've uninstalled activesync, deleted all registry entries, reinstalled, ensured proper firewall configuration, changed com ports, disabled my internal WLAN card and BT card...and nothing. Short of a hard-reset, I am at a total loss.
Has anyone else experienced this issue? Any work-arounds?
Click to expand...
Click to collapse
I had the same error today. But luckely i was only using ActiveSync 4.0, so i just updated to version 4.2 (I had to because of the new rom upgrade). I haven't had the problem since. But i have only tried it once... so i donno.
same problems with my Neo today.
Funny thing is that I could sync for 3 days then it suddenly stops. USB is recognized but then the "connecting" sign is just on and on and on.
I've tried all the methods from Microsoft web and from you guys in this forum but hopeless. (except for Re-install XP sp2)
Still searching the solution
Cheers
same problems with my Neo today.
Funny thing is that I could sync for 3 days then it suddenly stops. USB is recognized but then the "connecting" sign is just on and on and on.
I've tried all the methods from Microsoft web and from you guys in this forum but hopeless. (except for Re-install XP sp2)
Still searching the solution
Cheers
Yeah,
I seem to be having the same problem. It connects, then just hangs at "Looking for Changes." It doesn't even load up the list of things that it normally used to showing what it's comparing to sycn up. It was working FINE until just now....I've resetted the PDA, and my comp a few times already, and I even allowed all those ports access in both directions, both TCP and UDP through Norton Firewall...I'm completely at a loss....Any ideas?
--Q