Database Users

O2 wireless internet connexion please help

Hi
ihave a O2 XDA IIi and an belkin router
the wireless connection is established and my xda recognise the network but i cannot acess internet
what can i do?

go "setting>connection>network card"
and setup a card for your router.

doesn 't work
I TURN ON WIFI ON XDA IIi the connexion recpgnize wi-fi belkin 54g status connected
start settings/connections/network cards
configure wireless network page
belkin 54g connected
networks toaccess
all available
network adapters page
my network card connects to
work
tap an adaptor to modify settings:
NE2000 compatible ethernet driver (configured with all ip adresses and dns)
L2TP NDISWAN miniport
ASYNC MAC NDISWAN MINIPORT
PPTP NDISWAN miniport
tiacxwln compatible wireless ethernet (configured with all ip adresses and dns)
bluetooth pan user driver
is this ok?
i come back on
configure wireless network page
belkin 54g connected
networks toaccess
all available
i click on belkin 54g
this is what it shows
General
network name belkin 54g
connects to work
Network key
authentification open
data encryption wep
the key is provided for me automatically
802.1x
use IEEE 802.1x network accesscontrol
EAP TYPE PEAP
bUT
start settings/connections/wlan
main
status connected
current config
SSid belkin 54g tx rate auto
modeinfrastructur channel 6
bssid 00-11-50-7F-32-74
MAC 00-09-2D-15-3A-A8
IP 192.168.2.4
SIGNAL QUALITY GOOD
SETTINGS
POWER SAVE MODE
AUTO TURN OFFWLAN IF NOT CONNECTED
LEAP
SSID AUTHENTIFICATION TYPE
BLANK BLANK
IS THIS NORMAL?? SHOULD'n it show
belkin 54g??
when the wifi connected
i play iexplorer
when i type an internet adress
the message : the page you are looking forr cannot be found
thanks for your help..

Have the O2 XDA Exec myself, but the settings should be the same, checked with my Acer N50 to make sure
Leap is blank for me too.
some setting differences betweens yours and mine
neither the NE2000 or tiacswln cards have been touched in anyway, left them as default.
mine is set to connect to 'The Internet'
the key is provided for me automatically is unchecked, I manually typed it in with the key index.
use Ieee 802.1x is unchecked
check the belkin setup page, and see if the XDAIIi is staying connected or it is connecting and disconnecting.
looking at the manual, check the Belkin setup page at Firewall/Client IP Filters and make sure the PDA isn't being blocked there. Also check that the Mac Address Filtering is not enabled, if it is, you will need to add the PDA MAC address into it.

Hi Wytey
Thaks a lot, your configuration works perfectly.
Kisses

Using Notebook's Internet Connection on XDA

Hi Folks !
I am a new bee to XDA. Just purchased it last week. My objective is simple. I want to surf on my XDA neo via WiFi using the internet connection of my Acer Travelmate 2350 notebook. I tried doing the following :
1) Start/Settings/Connections/Network Cards : Here in configure Wireless Network, I have an entry called "bridge". This entry has following settings, Network name : bridge, Connects to : The Internet. "This is a device-to-device (ad-hoc) connection" is checked on. In Network Key, Authentication is open and Data Encryption is "Disabled".
2) In Network Adapters , My Network card connects to : The Internet. I have SDIO WLAN Wireless Adapter configured as :
Use Server-assigned IP Address is chosen. Everything is blank for WINS and DNS server settings.
My Notebook has Linksys WiFi PCIMCIA data card. My notebook is connected to internet via bluetooth to Nokia 6151 using EGDE connection.
When I open my Internet Expoler on my XDA Neo, it doesn't allow me to surf the internet.
Can any greek folks out here help me please !

WiFi problem :(

Hey, i have a problem with wifi ... its already showing that its connected to wifi router.. but the internet not working i had this problem from weeks ! .. till now cant find the way to fix it ! ... what do u think ? is there any apps can let the wifi work perfectly with internet ? .. or is there anyway to get back the internet ? .. i dunno its just showing that already connected to my wirless but no net ...
msTx.

This problem can not be answered with the information you gave us, for the problem might well be the network you attempt to connect to. If for some reason your router only allows local access, you will be able to connect, without being able to reach the internet.
First try disabling all security on your router (including mac-filter!) and attempt a connection. If it doesn't fly from there, give us some more info. (What kind of router, phone firmware etc.)

well, i will check my router settings and check the security... and i will give u the answer l8r ... anyway thx

i checked everything .. and my laptop works perfect with wifi 100% ! , but my xperia still doesnt work and also i restarted my router .. so here's the information about my router ..
It's Linksys router .
Network Mode: Mixed
Network Name (SSID): Linksys Router
Radio Band: 40 MHz Channel
Wide Channel: 9
Standard Channel: GHz 11 - 2.462 GHz
Wireless SSID Broadcast: Enabled
______________________________________
Security Mode : WPA2-Personal
Encryption: TKIP or AES
Pre-Shared Key: ******* (wireless password)
Key Renewal: 3600 Seconds
I dont want to Disable Security mode .. coz everyone will join my wireless and make more pressure and slow my net.
_______________________________________
MAC Filter is DISABLED
_______________________________________
AP Isolation : Disabled
Authentication Type: Auto
Basic Rate: Default
Transmission Rate: Auto
N Transmission Rate: Auto
CTS Protection Mode: Disabled
Beacon Interval: 100
DTIM Interval: 1
Fragmentation Threshold: 2346
RTS Threshold: 2346
________________________________________
Check them if anything wroung .. and thx

From the looks of it, your settings aren't "flawed" (to any extent you can speak of flawed anyway).
I meant disabling the security as a temporary test. If disabling allows you to connect, the problem lies there.
Also something that might help is changing the channel you're on.
If that doesn't help, update your router's firmware.
Finally, try connecting to another network with your X1, if that does work, the problem lies in compatibility (most often resolved with firmware updates for your router).

mstx while you are at it also test the following:
1. are the proxy settings on the phone correct? normally they should be empty
2. can you connect fine with the phone from activesync from the laptop
3. are your ip settings correct? some networks requires them to be static (you manually set the correct ip, subnet,gateway) instead of dynamic (from the dhcp server)?
4. when you connect to the wifi network it should ask you to select internet or work. select internet.

Heeey , i fixed it !.. now its work perfect !! ... well, the problem was in the xperia my wifi connection setting, the wifi setting was "connect to WORK" .. so I changed it "connect to THE INTERNET" .. and it works ...
anyway thanks guys !!

i think the problem come from here
Pre-Shared Key: ******* (wireless password)
try using a wep key instead
i think that wireless passxord doesn't work well on windows mobile

Help me to setup wlan enabled adsl modem. [ Solved ]

Hello,
Yesterday I got a wlan/wifi enabled adsl modem/router for my broadband connection which uses telephone line. I wanted to use the wifi output given by the modem, for my ppc in my home for internet. Something like wireless home networking. As this is the first time, I don't know or I'm a noob. The security settings in modem are :
Network Authentication: Open
WEP Encryption: disabled
When I search wifi signal, My ppc detects the modem; Says connecting and after few mins says unavailable so it don't connects.
Here is the manual : Link
Please help................
Solved : The modem was setted to "Bridging" ( Manual Connecting ) and after setting it to "PPP over Ethernet (PPPoE)" ( Auto connect ), The internet in my ppc is working fabulous.
Thanks and regards

Ok, now my PPC says connected. When I assigned ip in network adapters->wlan setting ( SDIO WLAN Wireless Adapter ).
But another problem here, Cannot use the net. Mean, IE or weather report or IM don't connect to internet.

Is there any MAC filtering set on the box? Are you getting a genuine IP lease, or is it a Windows auto-configured setting (169.254.x.x)?

Just looked at the manual - other things to check:
Is NAT (page 48) enabled?
Is DHCP Server (page 55) enabled on the box with correct IP range, subnet mask and gateway IP?

Rock Kicker said:
Is there any MAC filtering set on the box? Are you getting a genuine IP lease, or is it a Windows auto-configured setting (169.254.x.x)?
Click to expand...
Click to collapse
Rock Kicker said:
Just looked at the manual - other things to check:
Is NAT (page 48) enabled?
Is DHCP Server (page 55) enabled on the box with correct IP range, subnet mask and gateway IP?
Click to expand...
Click to collapse
Hello,
Thanks for the reply.
First, It was auto configured IP setting so in my ppc it was not connecting but after assigning the IP ( IP : 192.168.1.2, Subnet : 255.255.255.0, Gateway : 192.168.1.1 ) the ppc says connected.
OK, I will checkout that NAT and DHCP.
Thanks again.

Hey buddy,
This is right down my alley, if you still need some assistance just pm me.

Laptop cant connect to the WiFi Tether Wireless Connection

Hi Friends,
I'm currently running stock JPM on my SG3 with root access. Now I want use the wireless tethering functionality to use my phones 3g connection in my laptop over the air (not usb tethering) via wifi network.
So I've installed two apps - Barnacle WiFi Tether & Open Garden Tether and configure them correctly without any passkey. Now my cell is broadcasting the wifi signal but my laptop is unable to connect to this network. I'm not sure if I've missed anything here or not
Can you help me out to successfully connect to my laptop. Here is the event viewer log that I got from windows vista home premium.
Pleased please help me. Thanks in advance.
---------------------------------------------------------------------
Helper Class (RNWF MSM Helper Class) Event:
Wireless Diagnostic Helper Class Event
For complete information about this session see the Wireless Diagnostic Informational Event.
Helper Class: Native WiFi MSM
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 75fb573d-1970-40d3-9ee2-d99aae131fbe
Interface name: Intel(R) WiFi Link 5100
Interface type: Native WiFi
Profile: Discovery connection
SSID: MyGalaxy
SSID length: 8
Connection mode: Ad hoc
Security: No
Connect even if network is not broadcasting: No
Result of diagnosis: Problem found
Root cause:
Windows cannot connect to "MyGalaxy"
Wireless association failed due to an unknown reason.
Detailed root cause:
802.11 connection failed due to status code 1: unspecified failure
Repair option:
Try connecting to "MyGalaxy" again
If the problem continues, contact your network administrator or hardware manufacturer for further assistance.
--------------------------------------------------------------------------

Uninstall ur wifi driver & then reinstall it. hope this wld help..
Sent from my GT-I5800 using Tapatalk