Hi
ihave a O2 XDA IIi and an belkin router
the wireless connection is established and my xda recognise the network but i cannot acess internet
what can i do?
go "setting>connection>network card"
and setup a card for your router.
doesn 't work
I TURN ON WIFI ON XDA IIi the connexion recpgnize wi-fi belkin 54g status connected
start settings/connections/network cards
configure wireless network page
belkin 54g connected
networks toaccess
all available
network adapters page
my network card connects to
work
tap an adaptor to modify settings:
NE2000 compatible ethernet driver (configured with all ip adresses and dns)
L2TP NDISWAN miniport
ASYNC MAC NDISWAN MINIPORT
PPTP NDISWAN miniport
tiacxwln compatible wireless ethernet (configured with all ip adresses and dns)
bluetooth pan user driver
is this ok?
i come back on
configure wireless network page
belkin 54g connected
networks toaccess
all available
i click on belkin 54g
this is what it shows
General
network name belkin 54g
connects to work
Network key
authentification open
data encryption wep
the key is provided for me automatically
802.1x
use IEEE 802.1x network accesscontrol
EAP TYPE PEAP
bUT
start settings/connections/wlan
main
status connected
current config
SSid belkin 54g tx rate auto
modeinfrastructur channel 6
bssid 00-11-50-7F-32-74
MAC 00-09-2D-15-3A-A8
IP 192.168.2.4
SIGNAL QUALITY GOOD
SETTINGS
POWER SAVE MODE
AUTO TURN OFFWLAN IF NOT CONNECTED
LEAP
SSID AUTHENTIFICATION TYPE
BLANK BLANK
IS THIS NORMAL?? SHOULD'n it show
belkin 54g??
when the wifi connected
i play iexplorer
when i type an internet adress
the message : the page you are looking forr cannot be found
thanks for your help..
Have the O2 XDA Exec myself, but the settings should be the same, checked with my Acer N50 to make sure
Leap is blank for me too.
some setting differences betweens yours and mine
neither the NE2000 or tiacswln cards have been touched in anyway, left them as default.
mine is set to connect to 'The Internet'
the key is provided for me automatically is unchecked, I manually typed it in with the key index.
use Ieee 802.1x is unchecked
check the belkin setup page, and see if the XDAIIi is staying connected or it is connecting and disconnecting.
looking at the manual, check the Belkin setup page at Firewall/Client IP Filters and make sure the PDA isn't being blocked there. Also check that the Mac Address Filtering is not enabled, if it is, you will need to add the PDA MAC address into it.
Hi Wytey
Thaks a lot, your configuration works perfectly.
Kisses
Related
I can't connect in wifi to my router Linksys WRT54G. I have this problem only between this router and this pda.
Please help me.
Thanks
Is your router set to 11G only, or 11B AND 11G? The Universal can only handle the slower 11B...
Now i can connect, but only if i use manual settings.
I added manually my wireless network and, under network adapters, i set the tiacxwin compatible wireless ethernet to use specific ip address.
And it works.
Now i must be sure that it work in my home too, where it was set all automatic.
I am trying to get my O2 XDA mini to connect to my home network.
When wi-fi is on it picks up my Network as well as two neighbours! However I can't make any connection.
My home network is based on static IPs so I presume I need to configure a connection associated with the in-built Network Adapter. However there are multiple adapters listed - which is the wifi adapter please?
the list is;
AsyncMac NDISWAN-miniport
PPTP NDISWAN-miniport
Remote NDIS-host
L2TP NDISWAN-miniport
NE2000 compatible Ethernet driver
Virtual Ethernet Intermediate Miniport
SDIO WLAN Wireless
Also what is the difference between Work and Internet option? Is this just arbitrary naming of two optional connections?
And is there a way to Internet Explorer default to wifi connection rather than dial-up.
Thanks.
I would think the one that says WLAN (Wireless Lan) in it.
Surely it would be better to turn on DHCP? it does make life so much simpler....
I thought it might be the SDIO WLAN Wireless but the SDIO threw me - I thought it referred to an inserted card.
I change the power/battery settings to performance and it worked.
ok heres the deal... i have a MDA flashed with the software from att for the 8125 everything works great except when i turn wifi on, i can connect to the network but cant ever get a page to work. does anyone have any suggestions????? please help
Is this happening on any network or your home network?
Check this... go to Settings - Connections - Network Cards. Make sure the WLAN Adapter is set to connect to the internet. Then tap the WLAN Adapter and make sure IP Address is set to Server Assigned then in Name Servers you don't have anything. If any of these is different, change it to the above.
Yeah. I have the same problem. I have wifi pci asus, the signal is good. I have Lan tru router and now bridged connection. I set the ip, mask and gateway which are in the status of the brudge. And the internet explorer and opera wont load pages.?!??! dns isnt set.
The network adapter is sdio wlan.., and the connection is my work network in connection > connections > advanced >select networks.
i use wm6, nbd 8.0
What could be the problem???
it is home network and all other wifi locations
i know there is a problem with secured networks, especially with wpa encryption. try to remove the encryption and see how it goes....
I have removed all encription. I tried preety much everithing and it doesnt work. All other free wifi networks work just fine, i can surf on internet.
what router do you have? i know that i could not connect to a 3com router with the wizard with any rom i tried.
try using a defined ip address and dns, meaning no dhcp. use a real dns addresses and not the default gateway...
Hi Folks !
I am a new bee to XDA. Just purchased it last week. My objective is simple. I want to surf on my XDA neo via WiFi using the internet connection of my Acer Travelmate 2350 notebook. I tried doing the following :
1) Start/Settings/Connections/Network Cards : Here in configure Wireless Network, I have an entry called "bridge". This entry has following settings, Network name : bridge, Connects to : The Internet. "This is a device-to-device (ad-hoc) connection" is checked on. In Network Key, Authentication is open and Data Encryption is "Disabled".
2) In Network Adapters , My Network card connects to : The Internet. I have SDIO WLAN Wireless Adapter configured as :
Use Server-assigned IP Address is chosen. Everything is blank for WINS and DNS server settings.
My Notebook has Linksys WiFi PCIMCIA data card. My notebook is connected to internet via bluetooth to Nokia 6151 using EGDE connection.
When I open my Internet Expoler on my XDA Neo, it doesn't allow me to surf the internet.
Can any greek folks out here help me please !
my universal now is running Tomal's v10 rom, all goes well, but when I'm trying to connect to my wifi lan, it's discovered by my device as available but never connects.
my wifi lan is hidden (this isn't a problem for my other devices), I allow the universal mac tol connect to the land and I've asigned an specific ip direction inside my lan (as on my other devices)
I've configured my universal as my hermes: network name, as a hidden network, authentication wpa_psk, data encryption tkip, network key ok, use ieee 802.1x network access control marked, and eap type smart card or certificate
I don't know what else to do
Please, I would appreciate some help, dudes