Database Users

O2 wireless internet connexion please help

Hi
ihave a O2 XDA IIi and an belkin router
the wireless connection is established and my xda recognise the network but i cannot acess internet
what can i do?

go "setting>connection>network card"
and setup a card for your router.

doesn 't work
I TURN ON WIFI ON XDA IIi the connexion recpgnize wi-fi belkin 54g status connected
start settings/connections/network cards
configure wireless network page
belkin 54g connected
networks toaccess
all available
network adapters page
my network card connects to
work
tap an adaptor to modify settings:
NE2000 compatible ethernet driver (configured with all ip adresses and dns)
L2TP NDISWAN miniport
ASYNC MAC NDISWAN MINIPORT
PPTP NDISWAN miniport
tiacxwln compatible wireless ethernet (configured with all ip adresses and dns)
bluetooth pan user driver
is this ok?
i come back on
configure wireless network page
belkin 54g connected
networks toaccess
all available
i click on belkin 54g
this is what it shows
General
network name belkin 54g
connects to work
Network key
authentification open
data encryption wep
the key is provided for me automatically
802.1x
use IEEE 802.1x network accesscontrol
EAP TYPE PEAP
bUT
start settings/connections/wlan
main
status connected
current config
SSid belkin 54g tx rate auto
modeinfrastructur channel 6
bssid 00-11-50-7F-32-74
MAC 00-09-2D-15-3A-A8
IP 192.168.2.4
SIGNAL QUALITY GOOD
SETTINGS
POWER SAVE MODE
AUTO TURN OFFWLAN IF NOT CONNECTED
LEAP
SSID AUTHENTIFICATION TYPE
BLANK BLANK
IS THIS NORMAL?? SHOULD'n it show
belkin 54g??
when the wifi connected
i play iexplorer
when i type an internet adress
the message : the page you are looking forr cannot be found
thanks for your help..

Have the O2 XDA Exec myself, but the settings should be the same, checked with my Acer N50 to make sure
Leap is blank for me too.
some setting differences betweens yours and mine
neither the NE2000 or tiacswln cards have been touched in anyway, left them as default.
mine is set to connect to 'The Internet'
the key is provided for me automatically is unchecked, I manually typed it in with the key index.
use Ieee 802.1x is unchecked
check the belkin setup page, and see if the XDAIIi is staying connected or it is connecting and disconnecting.
looking at the manual, check the Belkin setup page at Firewall/Client IP Filters and make sure the PDA isn't being blocked there. Also check that the Mac Address Filtering is not enabled, if it is, you will need to add the PDA MAC address into it.

Hi Wytey
Thaks a lot, your configuration works perfectly.
Kisses

Wifi connection problem with XDA mini S

I originally posted this message a few days ago but as there were no responses I thought I'd try again. I'd appreciate any advice - thanks for looking ...
I have a XDA mini S. At home I have a wireless router/hub that is hard connected to my PC, but I connect to internet from my laptop via wifi (direct to router/hub) using an always on broadband connection.
I use WPA security, but when I tried to set up the XDA to connect wifi it didn't seem to have the ability to enter the WPA settings.
Ideally I'd like to use the XDA to network with the PC and the laptop for file transfers, but if I can't do that, at least I'd want to enable the XDA to access the inernet via the router/hub directly (ie without the other devices being turned on).
Can anyone help with this please - I know from other postings on this site that I'm not the only sufferer, but I haven't see a definitive solution.
Thanks
Charles

Make sure wireless is ENABLED.
Then
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click the "Wireless" Tab
Add a new connection
General Tab
Network Name: "MyNetwork" (or whatever you want)
Connects to: "The Internet" ("Work" also works for me)
Network Key Tab
Authentification: WPA-PSK
Network Key: "makeUpAKeyHere_thats-long&complex" (I use plenty of ££%!* type characters in mine)
802.1x Tab
Uncheck Use IEEE 802.1x network access control
All done!
Now make sure you have EXACTLY the same Network Key in your router and you should be good to go.
Now to connect to your PC & Laptops you use Resco Explorer 2005 (you'll need to buy it but worth every penny!) to MAP shares from your network.
How to is in This Thread
Worked for me, and I've only had my Mini S (my first PDA ever) a week!
Good luck!
Mark.

I just got my MDA Vario (same as XDA Mini S right?) today and the manual has absolutely nothing about connecting over wi-fi to *anything* let alone my home wi-fi router but I was pleased to find this thread , for a while
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click to expand...
Click to collapse
doesn't have a "wireless" tab (or any tabs for that matter) but it does offer me a list of adapters to let me modify settings (no option to add one though).
The nearest thing to wi-fi is "SDIO WLAN Wireless Adapter" but I'm pretty sure that would relate to something plugged in to the SDIO slot, and not the built in Wi-Fi hardware. Am I wrong?
I've fumbled around a bit and found one screen which offers a view where I might be able to enter the details you've given here, but the textboxes are all locked/readonly (empty) and I can't write anything in them.
I'm really disappointed so far.

the sdio card is the correct one, the wizard has an sdio wifi card inside I believe.
if you select network card under settings-connections you should be able to add a new connection there, if in doubt search for wifi connection, or post back here for more help, good luck
R

I got a PM about this thread, I thought I'd reply here to as the info could help others....In additon othres may be able to elaborate more on the 802.1 query
Mark,
I had the same problem regarding my mini s which you recently answered. I have a US robotics wireless router (9108) and connect it to my laptop (Thinkpad X31) using WPA-PSK and TKIP - the laptop does not allow me to check 802.1 which I understand is for large companies with a special server.
With my miniS I have found that as soon as I enter authentication WPA-PSK and encyption TKIP, the system automatically ticks 802.1 and I cannot access the page to turn it off.
I have tried communicating with O2 via email but they haven't really helped. What I want to know is whether on your machine with WPA-PSK and TKIP you can turn off 802.1 in which case mine has a fault and I can swap it - otherwise I have to find another smart phone!
Click to expand...
Click to collapse
Hi there, I'm a new user of these phones and understand little of Networking but I'll share my settings with you...
Under "Configure Wireless Network" I have:-
Under "General" Tab I have:-
Network Name: MyNetwork
Connects To: Work
Under "Network Key" Tab I have:-
Authentification: WPA-PSK
Data Encryption: TKIP
{Greyed Out} The key is automatically provided
Network Key:- ABCDE1234&*^ <- Whatever key you make up
{Greyed Out} Key Index: 1
Under "802.1x" Tab I have:-
Ticked use IEEE 802.1x network access control
(I can't change this.)
However on my domestic Netgear DG834G router everything connects just fine, g or b. Have you flashed your phone to the latest O2 firmware?
Mine is
ROM 2.21.4.1 WWE
ROM Date 3/9/06
Radio Version 02.07.10
Protocol Version 413.1.03
ExtROM Version:- 2.21.4.101
I hope this helps,
Mark.
PS. I'll post this in the thread too, it may help others.

hello
i recently purchased the xda mini s and a wifi usb adaptor. i am having trouble accessing the internet. my computer connects to the internet using ethernet to my wall (im not sure where it goes from there). i can connect my phone to a peer to peer wifi network but it does not let use the internet, could anyone help me with the settings please i would greatly appreciate it.
many thanks
harvey

To achieve that you need to set your primary connection as shared in network connections. Once you do that, adhoc mode should be possible without issue.

Please help - similar problem
Hi - I have an XDA Mini S and have connected without issue to the Internet via my router (Wirelessly of course).
The issue I have is that I cannot connect to any network shares on my PC. When I had a CF wireless card in my Ipaq I could do without issue. I have downloaded a ping proggy to XDA and can ping router but cannot ping the PC I have the shares on.
Normally (If I was using a laptop) I would check Workgroup/Domain settings, authentication credentials etc...nothing like this on XDA.
Please help
Wiggz

Quick - fix
I have spent hours messing around with this - however I have had a similar problem with a corporate laptop which wouldn't work.
I changed the router from WPA to WEP and bang - worked straight away. Exactly the same on my XDA Exec so should be same for Mini S (pocket PC 2005).
Hope this helps.

unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi for transferring files.
it shows the connections status excellent on both devices with ip address 169.254.72.236 on ppc and 169.254.130.63 on laptop.
i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.

MDA Wifi Wont Connect
Hi there-I have an mda vario which I was able to unlock as it was locked to t-mobile and I am with another network. After ages I was able to get a connection to my router or at least it says that it is connected. However I still cant connect to the net via wifi on my mda. I have put in the settings for wpa and wpa-psk, etc have unticked the 802.1x box etc but still no joy. Can anyone help?
Thanks
Morgas

Hi all, new here, thanks for the info posted, was useful but i'm still having problems with the wifi on my xda mini s to my netgear dg834gt router with sky broadband.
The problem seems to be that my xda finally connected to my broadband and router, but now when I try to use internet explorer on my xda I just get
"400 Bad Request"
"Bad filename."
Can anyone help with this? Thanks in advance

internet access through ad hoc wifi connection?

hi, im not able to connect to the net with my wizard.
i dont have a wireless router so am connecting directly to my laptop, the ad hoc connection i have made works fine for file tranfers, but not for activesync or connecting to the web in either PIE or minimo.
i know activesync isnt possible but surely i should be able to use the broaband from my laptop?
any pointers would be greatly appreciated. software? settings?
its a t-mobile uk vario with qtek test rom.
also anyone know of a remote control utility, i use logmein but would like something a little more menu/macro based for control of media.
cheers
kevo

Try turning on Internet Connection Sharing (ICS) on your laptop; that'll make your laptop act a bit more like a router, providing NAT services to the Wizard.

yeah i've tried that, and i've just tried bridging connections (dont really know much about that) but that hasnt worked either.
kevo

My configuration
Me too, I use ADHOC connection for my WLAN.
PC configuration:
ADSL connection shared
Adress IP:192.168.1.1 Mask:255.255.255.0
PocketPC configuration:
Adress IP:192.168.1.55 Mask:255.255.255.0 Gateway:192.168.1.1
DNS:80.10.246.2 for Wanadoo
Your problem is certainly the DNS.
You can put 192.168.1.1 too.

so it is possible? cool!.......but im still having problems.
i cant figure out how to enter these settings, not to sure where to put them,
iv tried puttin the DNS in the -> connections -> vpn
and -> network cards -> networks adapters -> SDIO WLAN Wireless Adapter
sorry to be a pain, but could you point me to where to get each address and where to put them?
also is there anything particular you did to set up the adhoc network? i just used the Windows XP wizard and then ticket the AdHoc option after.
my laptop is conected to the router and the router is connected to aol adsl.
the ip address of my laptop is showing as a simple 10.0.0. number on the LAN but "Autoconfiguration IP Address. . . : 169.254.235.147" for the WLAN
none of my setup has a static ip address, could this be causing the problems?
thanks
kevo

It's more hazardous without static adress but it's can work.
My PC has directly access to the Internet with a ADSL modem.
It's here (network cards -> networks adapters -> SDIO WLAN Wireless Adapter )
Apparently, it's ok for your PC and the Ad-Hoc mode.
Maybe, you should have your adress IP WLAN on the same network adress of your router.

I GOT IT WORKING!!!
I started again from scratch.
set a new WLAN. added new setup to the vario, added the DNS etc to the vario.
the problem i was having was the way i was sharing the internet connection, i was trying to shared the internet from the wireless to the lan rather than the internet from the lan to the wireless (if that makes sense to anyone!!!). i also ticked all the connection sharing services to allow them, just need to go through them and see which i dont need now.
thanks for the help guys
kevo
(its showing my transfer rate as 11Mbps, although i think iv done the G tweak and my laptop says its got a G card. what speeds should i be getting?)

WIFI Internet Connection

Hi guys,
I've got a netopia router (Irish "eircom" broadband) and while normal internet connections via laptop or PC (with USB Wifi dongle) work fine I just can't get my XDA Mini S to actually access the internet. I have managed to actually get it to connect via WIFI however when I launch internet explorer and click on a link it says it can't access using this connection.
"Can't connect with current connection settings. To change you connection settings, tap Settings".
Under connections I'm not sure what to select as I don't believe I need to setup a modem connection or VPN - am I wrong here??
It shows "connected" in the WIFI settings, indicating my SSID etc. Could someone advise me on what else I need to set. Basically I'm obtaining an IP address and my laptop etc work fine, just wondering what more I need to do to bash internet explorer into submission on the XDA. Is is just me or are Microsoft making this very hard on the normal user..
Start--> settings -->Wireless Lan
SSID is correct.. i.e my Wireless LAN
Mode : infrastructure
BSSID is set (though I don't know what this indicates)
TX Rate :auto
Channel :7
Start--> settings -->Wireless Lan - Advanced Tab
Status : Associated to Network
MAC number given
IP address given (so I guess DHCP is working fine)
Leap tab and Enroll tab - all settings blank.
------------------------------------------------
Start --> settings --> system --. Network cards
SSID shows Connected
Under Network Adapters tab : My network card connects to the Internet.
Adapter NE2000 Compatible Ethernet Driver. (not sure what difference this makes????)
I temporarily disabled WEP for the purposes of simplifying things.

Simple yet very annoying problem:
Go to Settings->connections->connections->advanced->network selection and make sure both combos read 'My ISP'.
Then, when connecting to your WiFi network select 'This network connects to the internet' (as I understand you already have this set under 'network adapters' so it should be ok).

THANK YOU!
levenum said:
Simple yet very annoying problem:
Go to Settings->connections->connections->advanced->network selection and make sure both combos read 'My ISP'.
Then, when connecting to your WiFi network select 'This network connects to the internet' (as I understand you already have this set under 'network adapters' so it should be ok).
Click to expand...
Click to collapse
Thank you so very much I have been look for this forever!!!

thanks so much for the tip too. i've been trying to fix my wifi ever since i upgraded to windows mobile 6 and this did the trick.

Create wifi network on PocketPC (HTC Touch) to share it's internet connection?

Hi,
I don't think this is currently possible but I do not see any reason why? Does anyone know if there is a 3rd party app to provide this?
Thanks,
Phillip

Possible ! (Well somewhat)
This is very much possible. I got it working as follows :
(1) Create a WiFi connection on Pocket Pc with ad-hoc feature and Open Security, make sure you select "Work" as the connection.
(2) Give the WiFi adapter on Pocket PC an internal address similar to 192.168.0.2 (255.255.255.0)
(3) On your PC/Laptop set WiFi adapter IP to 192.168.0.1 (255.255.255.0)
(4) You need a program like Pocket PC Proxy to be installed on the Pocket PC.
(5) Enable proxy settings on Laptop as 192.168.0.2:80 (or the port set on the proxy prog on ppc)
(6) Enable WiFi on ppc
And Voila ! You can browse internet using the connection on your ppc.

Hi,
Thanks, I will give this a try. However, I can't seem to find this piece of software (Pocket PC Proxy). Can you point me in the right direction?
Thanks

Here you go...

Thanks for the download, I'm using an HTC Touch (Elf) with WM6. I can't seem to figure out how to create an ad-hoc wifi connection?
(Sorry to be a pain but i think that this will benefit others too!)

Ahaa, I managed to figure out how to create an adhoc network on the Pocket PC, I assigned it the correct IP (as above) and basically followed the instructions.
I'm actually trying to get my iPod Touch to connect to the net via the HTC Touch.
I iPod sees the wifi connection and connects perfectly, I can even assign the ip and subnet mask. However, I simply can not connect to the internet either with or without the proxy. Any suggestions on what I am missing?
THanks

What kind of an internet connection do you have on the ppc ?
- GPRS/EDGE ? Is it always connected/on ?

Got it working, you can ignore the following
Thanks!
------
Hi, here is everything I have done:
Connections, Internet
Modem: T-Mobile Internet, GPRS (UK, no edge)
Proxy Settings: This network connects to the internet
This network uses a proxy server to conncet to the internet
149.254.291.132
(This was all set by the phone when I switched it on)
My Work Connection:
Nothing set up here
WIFI
Add New...
Network Name: test
Connects to: Work
This is a device-to-device (ad-hoc) connection
Authentication: Open
Data Encryption: Disabled
This seems to create an ad-hoc connection and sits there with 'Connecting' until another device connects to it.
Network Adapters
My network card connects to: Work
IEEE 802.11b/g Compatible WIFI....
Edit:
Use specific IP address:
192.168.0.2
255.255.255.0
(Everything else blank)
Wireless LAN
SSID: test
Mode: 802.11 Ad hoc
Channel: 11
When I connect two devices together the IP shown under advanced seems to read 192.168.0.21 (I think this should end .2 so not sure why it isn't)
If I connect my laptop I can 'ping' 192.168.0.2 and that works but both my laptop and ipod touch do not seem to be able to connect to the internet.
On the ipod touch I simply get 'Server not found' or something similar.
(I have remembered to run PocketPCProxy)
Yes, the GPRS is connected whenever I run PocketPCProxy.
I would really appreciate any help you can give, I really like using the browser on my ipod Touch but don't really want to go the whole hog and buy an iPhone because it is so tied down and restricted.
Thanks,
Phillip

I don't know what I have done but suddenly it works, now it comes up and shows the correct ip on my pocket pc.
Anyway, thanks for your help!

Hi everyone,
I have been trying to ad-hoc connect my PC (Lenovo X60s with XPSP2) to HTC Touch via WiFi to be able to share files and stream music.
It did connect and pinged ok, however the two just refuse to see one another on their networks.
Does anyone have any successful experience trying for the same?
Regards,
Madana

I tried this between my TyTN and TyTN II, the latter being the gateway, but the TyTN insists on still using GPRS for its internet instead of the wifi. Very annoying, and it's runing WM5 so (i dont think) you can't turn of the GPRS like you can with WM6.
Does anyone know how to make it use wifi, and wifi only for internet?
Thanks,
Sebastian

i have installed pocket pc proxy after a file called ......ppc3.arm.cab (i don't remember how it begins) but it doesn't work... any idea?

same here the pocket pc proxy when i run shows a fatal error in running it.
what should we do??

Hello,
I have samsung c6712 with wifi connected with internet near internet company with router as it is free for me, setting and pasaword is setted by those guys on my phone but they didnot give me their password and settings.
i like to run/use internet on my pc (xp32) with cable connection. How can I use that
[email protected]