I've saved my ROM to a SD card, but the XDARit program will not read it, I get an error: Did not find correct flash signature, aborting! - and it does not matter if I read .nb1 files or .img files.
When I try to write an image (.nbf file) to the card, it finishes in about 1 second, saying it wrote 65026 blocks ??? I try to write only the Windows CE part, since my boot loader is at 5.15.
Any ideas - I tried reading/writing on different PC's with different card readers, but always get the same error/behaviour. So maybe it's me?
Hope some of you gous can help.
Best regards,
Allan
If it's bootloader 5.17, read the instructions regarding 5.17 on the site...
I have Boot loader 5.15 - ie. the good old one
As I mentioned, I'm running boot loader 5.15, so all the nice tricks applying to 5.17 are not relevant, sorry. Interesting reading, though.
Any ideas why I can't read or write the SD card?
Best regards,
Allan
Oops, sorry for not reading your post completely..
No clue. I've been using XDArit extensively over the past few days. And while it's not a miracle of UI design, it does work for me. Using NT/2000/XP ? (It doesn't work on 95/98/ME)
I'm running Windows XP on both the PC's I've been testing with.
Any other clues?
Best regards,
Allan
Hi !
I have this problem also.
Thx for any helps.
I had the same problem, the SD card was locked as read only... :shock:
Sorry, the SD card is not read-only. But even if it was, shouldn't I be able to read the image from it anyway? I can't read and I can't write - hmmm.
Best ragards,
Allan
Hi all !
I have solution this problem.
Try anoder type of card in XDArit. For example try the SM card. Because the XDArit not recognize corretly the card type.
Sorry my poor english.
Best regards,
Sebi
In first: Sorry for my english In Second...
It's happen then you use any USB Hub in any type of it. For example if you cardreader don't connect directly to USB port in back of you case, but to any another connector (USB2 on motherboard for example or in you mouse) Try connecting cardreader directly to usb in youe case (motherboard) and all should be OK!
One more thing!
You should use USB 1.1 or 1.0 CardReader, only. Not USB 2.0. This program don't work with this protocol.
How about Usb travel Flash ?
I'm using a 6in1 travel flash. I be able to read up the SD Image backup created by My MDA yesterday using XDArit Read option.
I use XDArit to create a new image and restored back again, it shows that the files are still the original one that created by the MDA not XDArit.
It seems that XDArit not be able to write to the SD Card which was written once.
Dear LeAlex, please advice.
Thanks. There are many users waiting to upgrade theirs' ROM.
I'm using WinXP Home SP1 with 5.1.2600 drivers ? any problem
I forget to mention that I'm using WinXP Home edition with SP1.
The usb driver info for this travel flash is 5.1.2600.
Microsoft so said that USB2.0 is included in this SP1.
Any solution ?
dont think so that xdarit cant run on usb 2.0, i use xdarit on billionton usb 2.0, must change the usb mass storage driver to billionton driver cd, xdarit work fine, but when i try this methode in xp mechine it doesnt work coz billionton dont make special driver for xp
Hi fastblazer !
Use this link to dowload the Xdarit.
This version is work fine.
http://givemebeer.com:8080/warez/XDA/xdarit.exe
Sebi
XDarit problems
Hi
Solution from TandyJames work fine, solve all problem in this discussion.(N in 1 readers, ...). Need recompile sources - download not work ?
R.
Anonymous said:
Sorry, the SD card is not read-only. But even if it was, shouldn't I be able to read the image from it anyway? I can't read and I can't write - hmmm.
Best ragards,
Allan
Click to expand...
Click to collapse
Could you try to reformat it?
because I formatted my sd card with my ipaq 3850 then sdcard reader cant write it becaouse of readonly. So if you format it on xda, I think you can write it
Regards
I had the problems that you guys did...
and I ended up using the old version that you can find in some of these threads and that solved my problem...
T
Is it possible to return incidentally deleted files on my SD Card (@MDA Compact) without card reader? Any PPC soft for this, any bright ideas?? :?:
ThanX
I believe it is possible
First install Card Export II on your PPC, it will make your SD act like a mass storage... it works really good
http://www.softick.com/pocket-pc/cardexport2/
or you can try this free (alpha) program
http://www.freewareppc.com/utilities/usbmassstoragedriver.shtml
or here http://www.freewareppc.com/utilities/usbmassstoragedriver.shtml
I have not tried it.... but you can give it a shot
Second.... Install any software that recovers deleted files on your PC.... lets say File-Rescue Plus
http://www.softwareshelf.co.uk/files/products.asp?type=cat&ID=11
or Tune-Up http://www.tune-up.com/products/tuneup-utilities/
then try to recover deleted files...
Very Important.... to recover files successfully, you should do the Recover operation after files are deleted, and you should not write anything new to your card until you get the files recovered... this is because new files are being written to the same place your old filed were written to, and thus, you won't be able to recover them in case you added anything new!
let us now the results
cheers mate
duke911 said:
I believe it is possible
let us now the results
cheers mate
Click to expand...
Click to collapse
Thanx a lot, I solve the problem with CardExport + TuneUp combination! USBMSC-Alpha doesn't work.
Why there isn't any programmer to write a PPC software to to undeletle directly? It would be nice without even need to go to a desktop to do it.
you are welcome :wink:
is any program or hack to use the card memory for device ram?
thanks
eberto said:
is any program or hack to use the card memory for device ram?
thanks
Click to expand...
Click to collapse
Access to card memory is too slow.....
Next time try to search....
eberto said:
is any program or hack to use the card memory for device ram?
thanks
Click to expand...
Click to collapse
i am assuming you mean device "rom" ... not ram ... and no it can't be done. You can flash a rom to your device using a storage card but you can't install the rom onto storage card for use on phone.
i think he means ram, and no it cant be done, get a new device with more ram is the answer, best bet is probably the elfin, will cost sub £100
Good day, i could not search any guide or linkage about SD Config Tool.
i want to use it, would anyone pls give me a hand?
thanks much and happy new year.
do you mean this
http://forum.xda-developers.com/showthread.php?t=418151
?
2unique said:
do you mean this
http://forum.xda-developers.com/showthread.php?t=418151
?
Click to expand...
Click to collapse
i think no..
the tool that has the SDConfig.txt on microSD card and and auto install the CAB files into PPC or storage card.
Perhaps you could have a look at
http://forum.xda-developers.com/showthread.php?t=366337
which describe the principe of use memory card to tune the flashing of a ROM.
HTH. Happy new Year.
I often defragment my Micro SD 16GB card and it makes the world of difference. The question I have is; is it possible to defragment HTC HD’s internal memory? And if so, how would I go about doing it?
Kind Regards
darfri said:
Old 08-19-2004, 12:22 AM #2
Thor
Posts: n/a
Default Re: Scandisk/Defrag Flash Memory Cards?
"JTJersey" <> wrote in message
news:A_QUc.25935$.. .
> I use a compact flash card to transfer files between some Linux and
> Windows computers. I occasionally run scandisk and defrag on the flash
> card. Is this a good idea or not? Thanks.
> --
> Registered Linux User #267152
can't see how it would really help. Accessing one area of flash memory
shouldn't take any longer than any other area, unlike a harddrive where
having fragmented files forces the drive to access multiple areas of the
platter(s) to read all parts of that file, increasing the response time of
the drive. So I don't really see a benefit in defragging a solid state
memory device.
Click to expand...
Click to collapse
I think the 'world of difference' is more like an Alice In Wonderland
This is / has been discussed here: http://forum.xda-developers.com/showthread.php?t=501143
Read post #42 onward (and there are a few others before).
Redundant thread.
Ta
Dave