Updated rom's to version Radio 4.16 and Rom 3.15.15
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RUU_ENG.exe = ROM upgrade
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RSU_ENG.exe = RADIO upgrade
Hello i was wondering if the above ROM updates will work on my QTEK 1010:
ROM Version: 3.16.13 ENG
Radio Version: 3.19.01
I mean anyone tested if before or managed to upgrade his QTEK with the above ROM versions from O2 and were there any complications!!
:?: :?: :? :?: :?:
Thanks
Yes I did and it worked fine. I have it running on T-Mobile MDA, Qtek 1010 and Eurotel dataphone (rebranded Qtek). No problems.
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
It has been answered a few times, look through fora. it's a general pocket pc language change question, but applies to this one too. You need to rewrite the ROM header to match your device. Can be sort of tricky if you don't know what you're doing.
Did you install it
I have the same qtek with 3.16 and 3.19 shall I do it or wait to uk version?
If you don't mind O2 startup screen & O2 autoconfig...
supplier or distributor
nanis said:
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
Click to expand...
Click to collapse
Hi,
My advise to you is to try to get the latest rom upgrade from
either your supplier or distributors.
Also be very wary and careful when you got advice from this
forum on where or which website to download etc especially the
one which you do not have any informations if it suit your device
or not. If it is not suitable then after downloading it to your device
it will freeze up and you have to get it replaced. These people who
give advise take for granted everyone who view this forum are
professional like them. They never realise there are lots of new
users of the device that are trying to find out more informations.
Sometimes no warning was given to you when they just give you
the website to download etc.. I am one of those new user and also
I believe one of the victims too. I do support their intetests in this
forum but not the way some of the advise are given. Hope they
got the message. So good luck to you and happy upgrading.
Why on earth would you want to go from 3.16/3.19 to 3.15/4.16? Makes no sense to me...
bamse: because it's better
I'am used xda radio upgrade 4.16.00 with qtek
it is fine
I previously flashed my rom version from ATT/Siemens upgrade,A.20.17, to the XDA-Developer's 3.17.03 using usb cradle. This was so I could unlock my sim card. Everything worked smoothly, I can make calls and everything. Now I want to upgrade to the new ATT WM2003 and it tells me that "The ROM image that you are trying to upgrade is not ucompatible with your Pocket PC.
Your current device information:
Model: PW10A1
ROM Version: 3.17
Lang: English
Your upgraded image information:
Model: PW10B1
ROM Version: A.30
Language: Eng
So I tried to upgrade back to A.20.17 hoping I could go from it to WM2003, No luck. Any suggestions? :?
I think the installer is mismatching the version numbers. Your XDA thinks its a PW10A1 which if I'm not mistaken, is the Euro version of the xda - probably down to you using the XDA-dev rom.
A simple solution to your problem is to extract the rom update and use a SD card together with XDAtools to flash your device to WM2003
Why does the RUU package I downloaded say it won't work on my device?
The software in the RUU package checks whether the type identifier in your Wallaby matches the one with the ROM image. So if your Wallaby claims to be a German O2 XDA, the English Qtek 1010 version of the OS will not install. Our tool adaptROM makes this problem go away. (See below)
Click to expand...
Click to collapse
found in http://wiki.xda-developers.com/wiki/WallabyFAQ
I knew i'd seen it somewhere ! :lol:
Thanks maltloaf, I'll try out the XDAtools and see if that does the trick. I'll post my findings.
Hi profis,
i did an upgrade for my MDAc Rom 1.01.01 GER T-Mobile to I-mate ROM.
Now I wonder, if I will go back with my SD-backup nothing happened but:
"Serial v1.00"
So the question is ho to come back to German ROM.
Thanks a lot
Reiner :x
first you gotta obtain a german rom from www.compactjam.com for example. then you have to modify this rom: You must replace the first 412 bytes from the german rom with the first 412 byte from your actual imate-rom. then write the german rom to sd and flash it back using the bootloader.
regards,
André
hi all,
I have read carrefully and used the search button but no one is talking about making a backup rom of its original one.
before to install a new one I prefere to have the possiblity to roll back.
if you know how to do it ...
thanx a lot
a new newbee user
V1605 vodafone sfr (qtek 9600)
ROM 1.23.163.3
date de ROM 06/18/06
version de radio 1.06.00.00
version de proto 32.27.7010.01w
Use SPB Backup!
SPB Backup will NOT back up the ROM.
I also want to back up my original ROM so that I can roll back. This is necessary if you ever have to send you PocketPC back to the manufacturer any kind of reasons.
There is a way to dump ROM (see WiKi), but no a way to flash the dump back. So, the only "backup" currently is an official ROM update. There are a few in the WiKi as well.
Thanks for your input Lurker0.
What can you do with a dump ROM ? I mean can I do something with it ?
I have the WM5 emulator on my PC, can I dump my TyTN ROM and put it on my PC so that the PocketPC emulator behaves exactly like my HTC TyTN ?
please, can someone give me english rom for hp ipaq 6915? my device has next settings:
system operativ 5.1.195 built 14957.2.3.1
livello di revisione del prodotto 1.0
rom 06/22/06
rom 1.25.00. ITA
versione rom estesa N/A
Windows CE 5.1
bootloader: G.39
Versione XIP: 1.0.0.0
and if you'll give me the rom, please please give me the instructions too how to install it...thank you very much
HP hw6915 english rom needed
Please, can someone give me english rom for hp ipaq 6915 too?
My device has next settings:
rom 06/21/06
rom 1.24.00. FRA
Windows CE 5.1
bootloader: G.39
Versione XIP: 1.0.0.0
And if you'll give me the rom, please please give me the instructions too how to install it...
Thank you very much
[email protected]
ive got :
Product revision level : 1.0
ROM date : 06/12/06
ROM version : 1.21UK.00 ENG
Extended ROM version : N/A
OS version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
If anyone wants to explain how to get it off my device, then please let me know and ill give it a shot.
English ROM for hw6915
00SparX00 said:
Product revision level : 1.0
ROM date : 06/12/06
ROM version : 1.21UK.00 ENG
Extended ROM version : N/A
OS version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
If anyone wants to explain how to get it off my device, then please let me know and ill give it a shot.
Click to expand...
Click to collapse
Setup
- rename 'grab_it_xx.exe' to 'autorun.exe'
- create folder '2577' on your (empty) SD/MMC/Mini-SD card
- copy 'autorun.exe' to this folder
That's it for the "setup" )
Usage
Now every time, when you insert this card into PPC it will grab the ROM image and save it into root of the card as 'dump.bin'.
It will show you a tiny red progress bar at the very bottom of the screen.
Once done, it will beep the default sound.
Message boxes are only shown in case of error.
IMPORTANT NOTE (thanx MDAIIIuser)
YOU MUST NOT put it back into another device!!!
YOU MUST LOCK THE SD CARD FIRST!!!!!
or read the SD with card reader on your desktop PC.
Otherwise, you will rewrite the dump with your own ROM!!!!
This ROM dump file can be then further processed and converted to flashable formats.
Tool is here:http://forum.xda-developers.com/attachment.php?attachmentid=23564&d=1119937614
Then send or publish dump.bin file to all needes
-varix-
[email protected]
I just ripped the image from my 6955 and will upload it later tonight. Just wondering if it is possible to make a WM6 rom after disecting this and applying the useful bits to one of the WM6 updates for one of the HTC devices. Anyone have any information on this?
Hp Ipqt 6915 english rom needed
Does anybody can publish English ROM for iPaq hw6915? Info about grab is located above. May be somebody has link to this image on the ftp server?
-varix-
[email protected]
I tried but when I remove the memory card (after waiting about an hour) I get an error saying "Cannot create file". The file is a 128 MB file before I remove the card, but when I remove it...it becomes a 52 KB file which is corrupted.
Did You read card in the card reader? This method starts work any time when You put SD into iPaq.
-varix-
doesnt work
i tried grab_it_128_150.exe on a mini -sd but i got a non good dump.bin,
tried also grab_it_128_minisd_468.exe but that doesn't work at all,
a simple d2s command results in a screen thats stuck in cal cheksum,
any advise????
I used grab_it_128_150 on the 1Gb miniCD w/o any problems. No one grab_it_xxx except this does not work on the my hw6915.
I have uploaded dump.bon from english hw6519 here :
http://maloos.free.fr/dump.bin
Hoping it'll help..
I need french language by the way
varix said:
I used grab_it_128_150 on the 1Gb miniCD w/o any problems. No one grab_it_xxx except this does not work on the my hw6915.
Click to expand...
Click to collapse
rom dump
you rom real? after winrar 161 KB? work?
So what to do with this dump now ?
how to flash the English rom onto IPAQ hw6915
How do I flash the downloaded English rom onto my IPAQ hw6915?
Answers are greatly appreciated!
so, does someone has a little tutorial how to flash on hw6915, and an english rom? please
The obstacle is that HP so far has not released any rom update for the HW69xx, thus we do not have a valid rom to test. I suppose it can be done by the same method to flash a HW65xx, but it is quite risky to flash a dumped bin file, plus if anying goes wrong, we know little to do. I used to have a Tytn and the Tytn upgrading group has contributed so much that almost makes rom upgrading a piece of cake. So maybe it is because the 6900 user base is too small thus we do not have some talent programmer like POF,etc. , who may have opted for htc native devices.
Suggestion: either wait for HP to release some rom update for us to do some experience(sooner or later), OR SET UP A FUND TO BUY A 6900 FOR SOME SMART PROGRAMMER and setup a REWARD if one get it done. I think 6900 hardware wise is a really nice machine, but HP sucks on the software side. Too much room to be improved. Let alone WM6, where is AKU3???
The link is dead, can someone please send me or add a link for a hw6915 english rom as i bought one from ebay and its french , i am hopeing to change it to english
please help
mrking
I'm in need of the 6900 rom as well so please post a link to it.
I have attached a copy of an Ipaq HW6915 English ROM. I hope this helps.
http://rapidshare.com/files/46350136/Ipaq_HW69XX_ENG_ROM.rar.html