Database Users

GPRS Monitor

I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?

Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.

No problem thanks for your help

dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz

Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.

Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.

It works a treat. Thanks muchly!

Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:

I also managed to 'locate' another copy and it works fine, thanks for all the help.

astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.

Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?

Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!

sorry ignore that post! Work computer blocked the file out

I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.

Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob

Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.

Tried it. Still get the problem :-(

My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.

Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.

I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.

Program Installation Problem

I have had many pocket PC's and the Universal w/WM5 is the only one that gives me consistant installation problems. I had listpro 3.0 installed in program memory. I uninstalled it with the intent of re-installing it on the SD card. Unchecking it from activesync did nothing. Removing from the ppc directly told me that all of the file were not removed. I saw the the folder still existed in program files, do I deleted the directory and shortcuts pointing to it. I have had this exact same problem MANY times
Am I the only one with this problem? I don't find any messages like this.
Next, I try to reinstall listpro and it won't reinstall :x I get a message cannot be installed, try another location (which does not work). Do I need a hard reset? I tryed installing another program and I can still install other stuff, but the removal did not work again.

GaryK2 said:
I have had many pocket PC's and the Universal w/WM5 is the only one that gives me consistant installation problems. I had listpro 3.0 installed in program memory. I uninstalled it with the intent of re-installing it on the SD card. Unchecking it from activesync did nothing. Removing from the ppc directly told me that all of the file were not removed. I saw the the folder still existed in program files, do I deleted the directory and shortcuts pointing to it. I have had this exact same problem MANY times
Am I the only one with this problem? I don't find any messages like this.
Next, I try to reinstall listpro and it won't reinstall :x I get a message cannot be installed, try another location (which does not work). Do I need a hard reset? I tryed installing another program and I can still install other stuff, but the removal did not work again.
Click to expand...
Click to collapse
Hi Gary!
I have a lot of experience in this sh*t. WM5 cannot uninstall or install in a lot of cases. Usually if you still have some files or folders which are on the same location than with the installation, installer says: cannot install. In that case you have to delete (or rename) the folder left, and then you can install it. In other cases installer stays in a loop install condition, and cannot continue. In that case try to install another application to finish somelooped order. I realised another thing, which is very interesting: when you want to uninstall a program, and your pda says it cannot be removed - or something -, if I run Vijay555 killphone application in 98% of the cases after it I can uninstall the same.
I hope this wil help!

Hi,
Perhaps I have been lucky but I havent had any issues with regards to installing or uninstalling programs.
I do make sure that I soft reset before and after - so maybe thats a golden rule!
Matt

Yes, softreset would be a good tip in more cases, but it wouldn't solve the problem when you want to install a program which needs a place what exists.

I did find some files in the windows directory and deleted them. That WORKED. Just doing program files is not enough. In this case, the file name was the same as the program. I don't expect to be that lucky all the time.
I have done soft-resets when it does not work. I do a number of trial programs and tend to forget prior to removal. What a apin
Got to love Microsoft - reboot is the answer to everything.

Installation problems.....
I am having the same problem too.
Even after a hard reset when I try and install Sprite Backup & Agenda Fusion I keep getting the install error: 'cannot be installed, try another location'
It's driving me up the wall! I would have thought after a hard reset this wouldn't be an issue. I'm now the proud owner of an MDA Pro (Universal) that I can't use because the software I want to install won't install.
Can anyone help me please?

Help! Can't install or uninstall any apps on WM5

Help is needed. I tried to install PocketStocks this morning. It would not install and now I can not install or delete anything from my 8125. I can run what is on it, but I can not add or remove anything. I have soft reset and tried multiple times to connect by USB but it will not sync. But it will let me "Explore" my hardware.
The Microsoft Active Sync troubleshooter is no help at all.
Any ideas?

jschaff said:
Help is needed. I tried to install PocketStocks this morning. It would not install and now I can not install or delete anything from my 8125. I can run what is on it, but I can not add or remove anything. I have soft reset and tried multiple times to connect by USB but it will not sync. But it will let me "Explore" my hardware.
The Microsoft Active Sync troubleshooter is no help at all.
Any ideas?
Click to expand...
Click to collapse
Hi i am familiar with pocketstocks but it looks like it buggered your device. What error message came up and how far into the install did it get? Just wondering are there any residual files to remove - check program files and windows\startup and registry if you are used to doing that. What error comes up when you try to install anything? You may need to backup important files and do a hard reset to solve this.

I had tried to install Pocket Financial Analyzer just before it, and that did not complete the install. So when I did the Pocket Stocks, it finished up by saying that PFA install was unsuccessful. I have had this happen before but a soft reset and reinstall usually made it work. I kind of do not think Pocket Stocks is the culprit.
I suspect that there is a corrupted system file, and maybe if I knew which one it was, I could delete it and a soft reset would rebuild the file.
Or like you said, I may have to do a hard reset and start all over. And that is OK. I have done this about five times before, but everything is working so good on the phone right now, that I hesitate to mess that up. I just can't add or delete any programs.
Its so weird, at first the name of my phone would not come up. Then I deleted Active Sync 4.1 and installed AS 4.2 beta. Now I can get the device name to show up, but still the list of installed programs does not show and I can't sync it.
Help is needed.

I had tried to install Pocket Financial Analyzer just before it, and that did not complete the install. So when I did the Pocket Stocks, it finished up by saying that PFA install was unsuccessful. I have had this happen before but a soft reset and reinstall usually made it work. I kind of do not think Pocket Stocks is the culprit.
I suspect that there is a corrupted system file, and maybe if I knew which one it was, I could delete it and a soft reset would rebuild the file.
Or like you said, I may have to do a hard reset and start all over. And that is OK. I have done this about five times before, but everything is working so good on the phone right now, that I hesitate to mess that up. I just can't add or delete any programs.
Its so weird, at first the name of my phone would not come up. Then I deleted Active Sync 4.1 and installed AS 4.2 beta. Now I can get the device name to show up, but still the list of installed programs does not show and I can't sync it.
Help is needed.

I agree there probably is a corrupt file somewhere - I would do all the checks I said and notification queue for good measure - but it looks like hard reset time. Recommend you invest in spb backup or sprite backup - then it all becomes so easy! Everybody that joins this forum should have to buy one - before entering the forum - lol!

I had SPB Backup trial. But everyone was saying that the ROM upgrades made the backup invalid since there were registry changes that may not correspond with the new registry.
So I did not use it again. I heard that SKTools has a backup built in. NO?
Which one is the best to use?
Thanks

I had SPB Backup trial. But everyone was saying that the ROM upgrades made the backup invalid since there were registry changes that may not correspond with the new registry.
So I did not use it again. I heard that SKTools has a backup built in. NO?
Which one is the best to use?
Thanks

Sktools has a limited backup, so its not that useful. Sprite backup is good as you can use it even with a rom upgrade and is now wm5 compatible.

[B]xHelp how do i I unlock "Sufficient System Permissions" [/B]

Hi,
I have a cingular 8525 with the default cingular ROM ( will change it later want to wait a litle while)
I am trying to install a Cab and i get this notification:
the installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions
I know this is a simple registry hack and i seen a couple but I have not seen anything specific to hermes.
Please give me a link to directions
Thank You

Here... Install this CAB to the phone

This did not help
I installed the Remove Security Cab and it installed with no problem, but when i try to install: CommButton-Toggle-Vibrate-Fix.CAB
I still get the same notification.
Thanks

Did more searching still cant solve it
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You

medmenz said:
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
Click to expand...
Click to collapse
Purely on the point of running processes - these will not show up in programmes in memory (except in very broad terms). An application such as sktools will show running processes.
(I am not saying this will solve your problem though)
Mike

ok i will try getting a prog and stoping more stuff to see if i can install?
Any other sugestions?

Tried using SKtools to stop everyhing possible still cant install the CommButton-Toggle-Vibrate-Fix.CAB
Is there anyone out there that knows how to fix this problem???
Please Help
thanks

Is there a way maybe to instead of installing this cab file to do it manualy??
Can I somehow modify registry to do the same as this cab is doing?
thanks

As a general rule, if I have an "unstoppable" process, I power cycle the phone and then execute the cab without opening ANYTHING else (like the comm manager in this case). Give it a shot.

I just tried that turning it off and on and trying to install, also doing soft reset and trying to install. Nothing works as soon as I click on it in a second i get "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Please tell me what else I can try??

Finaly got what I wanted
I never got the stupid cab to install, but I found a different cab which let you assign vibrate to anything ( http://www.8525software.com/)utilities so when i hold PTT button it switches to Vibrate
Thanks for all that tried to help me.

Help Installing CAB Files on Treo Pro

Everytime I download a CAB file and try to install on my Treo Pro I get an error message stating that runtime isn't installed. I tried finding runtime on my device but had no luck...any help would be appreciated.

Hate to offer the obvious, but have you done a hard reset? which cabs specifically aren't working? Are you installing them onto your device, or a memory card?

I have one a hard reset...no luck
Onto the device, not the mem card as I don't have one installed.
I can't get any cabs to install. I am trying to install Skyfire and/or Opera Mobile

How did you perform a hard reset?
Soft reset the Red button + DPad up?

Yep.
Removed bat door, used soft reset while holding red button...waited for the "erase all items" or whatever it says and then went through the process.
I know there is a ROM update out so I wonder if that will fix this. It's obviously something JAVA related that i can't seem to figure out.

Rom update? For the Treo Pro? Do you have a link for that?

I got it from a buddy who is a tech for Sprint.

T850eww-1.05-spt