I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.
No problem thanks for your help
dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz
Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.
Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.
It works a treat. Thanks muchly!
Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:
I also managed to 'locate' another copy and it works fine, thanks for all the help.
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?
Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!
sorry ignore that post! Work computer blocked the file out
I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.
Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob
Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.
Tried it. Still get the problem :-(
My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.
Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.
I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.
Related
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
fmcgirt said:
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
Click to expand...
Click to collapse
It can, just try again anad again, i did it on my 4th attemps
Cheers!
Thanks for the response but I haven't had any success after several tries. I tried installing the Wizard unlock cab file and afterwards with Total Commander, I can reset the Read Only bit on all the files and copy the files to my SD card. However, I am unable to delete any files. They appear to be deleted but come back after a soft reset. I would like to especially get rid of all the operator settings files. The rest of the stuff like Skype, Anti Virus and Backgammon I can get rid of using Settings>Remove Programs.
Frank
Isn't "ROM" short for "read only memory"?
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Total commander does not work with the jamin in my case anyway.
Tried several time with no results.
shahzadkhan15nov said:
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Click to expand...
Click to collapse
hi,
unlocker for wizard is not mine...
buzz
...well, if anyone can give me a dump of Prophet's bootloader + clean registry export, i can take a look at it..
buzz
Buzz,
Thanks for the great offer.
I can give you the clean reg but how can i get you the first part, bootloader thingie?
Regards
I have used the Wizard Extended ROM unlock program to unlock the ROM on my Prophet. I now have a copy of the Extended ROM on my SD Card. I'm not concerned about erasing the Extended ROM files, I just don't wan them installed, so I did a Hard Reset and just when it says that it will start installing the additional prorams in 3 seconds, I did a soft reset.
OK, now I have a Prophet without extended ROM. I can now install the stuff that I want.
Most of the cab files I've figured out, Does anyone know what the following extended ROM cabs do? This is from the latest Imate Jamin ROM.
Default_CAAVPPC_IMEI_2.6.77_range.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_MP_Shortcut_MMS1_JAVA_VOICE_CV_051213.CAB
Default_PP_TSK.CAB
Default_PP_UAString.CAB
Default_PT_Signed_IconDll.sa.CAB
Default_PT_Signed_Patch_SD.sa.CAB
Thanks heaps,
Matterhorn
Default_CAAVPPC_IMEI_2.6.77_range.CAB is the anti-virus app which used to play havoc in slowing down the KJAM. Maybe this version is better but I uninstalled it using Remove Programs. About the rest I am not sure. At least you don't have Skype, backgammon and the Operator Settings files so I expect you will gain a fair amount.
Frank
you can use wince cab manager to see the content of the cab file.
Still nothing? Guess I will go the way of Matterhorn when I need to do a hard reset. Several others have not installed the Extended ROM at all and have reported significant speedup in the JAMin.
Frank
That would be me. I haven't installed one thing off the extended rom and my speed is really pretty good. You can see a video review at the link below to compare the m600 and the jamin (with no extended rom). Keep in mind I don't use mms, skype, antivirus anyway....so no big deal to leave off the ext rom. I also use adobe and don't need the clearview .pdf. Hope the video helps
http://www.howardforums.com/showthread.php?t=849592
Thanks, Mike. I don't use the stuff either except MMS once in a while but can just as easily use email for that. I presume Voice Dial is in the Extended Rom but rather have MS VC anyway and things like Connection Manager, Messaging, etc., that I want are not in the Extended ROM so I should be fine.
Now to find time to do a hard reset and re-install my apps.
Frank
Everyone has diffrent issues, I was able to delete the files from there (verified by refreshing the dir, and I recieved no read only error) but I was unable to write files to it, which I thought was very strange, I am using APA_ext_rom_unlock.exe and it does NOT give me the success msg it acts like it hasnt even ran. I updated my ROM to teh test one that was floating auround 2.8.7 whatever, and I realized too late that aWizard has no way to reflash teh extended ROM so I am without all my Cingular apps and I have all the 2.8.7 Extended rom stuff with the 1.8 Cingular OS ROM which I reverted back to. Any suggestions how I can replace my extended ROM ?
any luck so far?
Hi guys,
Are we getting any hope/luck to unlock Ext ROM for JAMin/Prophet?
I don't know how you guys are doing it. I have tried several times to delete items in my extended rom using total commander, at least 10 times and the result is the same. After the hard reset all that was deleted was re-installed after the reset.
I have contacted TC a while ago, and have not heard anything, maybe they are working on it.
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
mikewchandler said:
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
Click to expand...
Click to collapse
No, I think the end result would be pretty much the same. For me I would like an Extended ROM for the JAMin that includes exacty what I want installed - no Backgammon, AntiVirus, Smart Dialing, Skype and a single Operator Settings file for TMO USA. Then when I hard reset I don't have to mess with anything else, just let it go. I had my KJAM setup that way and I would like the JAMin to be the same. I would also be as close to an OEM install as I can get (without the junk) so I don't have to worry about proper default settings not being there because of some file I didn't install or installed in the wrong order. Having said all this and thinking about it more I am sure you would get to the same point doing your procedure and then installing the required .cab files in the proper order.
Now I have a question:
Wonder what would happen if I did a hard reset, then did the soft reset to stop the Ext ROM install, installed the required .cab files in order, soft reset and then restored from a Sprite BU file. Wonder would I be restoring any files that could cause problems due to an imcomplete ROM install? I guess I will have to try that first since I do hate to re-install a bunch of apps and especially have to re-enter all the reg codes.
Frank
I have had many pocket PC's and the Universal w/WM5 is the only one that gives me consistant installation problems. I had listpro 3.0 installed in program memory. I uninstalled it with the intent of re-installing it on the SD card. Unchecking it from activesync did nothing. Removing from the ppc directly told me that all of the file were not removed. I saw the the folder still existed in program files, do I deleted the directory and shortcuts pointing to it. I have had this exact same problem MANY times
Am I the only one with this problem? I don't find any messages like this.
Next, I try to reinstall listpro and it won't reinstall :x I get a message cannot be installed, try another location (which does not work). Do I need a hard reset? I tryed installing another program and I can still install other stuff, but the removal did not work again.
GaryK2 said:
I have had many pocket PC's and the Universal w/WM5 is the only one that gives me consistant installation problems. I had listpro 3.0 installed in program memory. I uninstalled it with the intent of re-installing it on the SD card. Unchecking it from activesync did nothing. Removing from the ppc directly told me that all of the file were not removed. I saw the the folder still existed in program files, do I deleted the directory and shortcuts pointing to it. I have had this exact same problem MANY times
Am I the only one with this problem? I don't find any messages like this.
Next, I try to reinstall listpro and it won't reinstall :x I get a message cannot be installed, try another location (which does not work). Do I need a hard reset? I tryed installing another program and I can still install other stuff, but the removal did not work again.
Click to expand...
Click to collapse
Hi Gary!
I have a lot of experience in this sh*t. WM5 cannot uninstall or install in a lot of cases. Usually if you still have some files or folders which are on the same location than with the installation, installer says: cannot install. In that case you have to delete (or rename) the folder left, and then you can install it. In other cases installer stays in a loop install condition, and cannot continue. In that case try to install another application to finish somelooped order. I realised another thing, which is very interesting: when you want to uninstall a program, and your pda says it cannot be removed - or something -, if I run Vijay555 killphone application in 98% of the cases after it I can uninstall the same.
I hope this wil help!
Hi,
Perhaps I have been lucky but I havent had any issues with regards to installing or uninstalling programs.
I do make sure that I soft reset before and after - so maybe thats a golden rule!
Matt
Yes, softreset would be a good tip in more cases, but it wouldn't solve the problem when you want to install a program which needs a place what exists.
I did find some files in the windows directory and deleted them. That WORKED. Just doing program files is not enough. In this case, the file name was the same as the program. I don't expect to be that lucky all the time.
I have done soft-resets when it does not work. I do a number of trial programs and tend to forget prior to removal. What a apin
Got to love Microsoft - reboot is the answer to everything.
Installation problems.....
I am having the same problem too.
Even after a hard reset when I try and install Sprite Backup & Agenda Fusion I keep getting the install error: 'cannot be installed, try another location'
It's driving me up the wall! I would have thought after a hard reset this wouldn't be an issue. I'm now the proud owner of an MDA Pro (Universal) that I can't use because the software I want to install won't install.
Can anyone help me please?
Pls pls pls help
can't install anything anymore on my VArio II
can't sync with activesync either, whatsup
If you want help then something a little more detailed might help.... does it produce errors?!? what are the error messages, etc... it would be like telling your docter over the phone that you dont fell good... unless your doctor is psychic then he cant diagnose your problem without more information..
More Info As Req
ok
got wisbar and wisbar deskstop looks sweet
a few other odds and sods
but try to install security Wallet,shareware to try it out
and bam it just wouldn't accept it
when to try and uninstall it and my remove program list was blank
try to install a software from the CD that came with my VArio and it wouldn't install that either!!!!
really scared!!!!
rickyjune said:
ok
got wisbar and wisbar deskstop looks sweet
a few other odds and sods
but try to install security Wallet,shareware to try it out
and bam it just wouldn't accept it
when to try and uninstall it and my remove program list was blank
try to install a software from the CD that came with my VArio and it wouldn't install that either!!!!
really scared!!!!
Click to expand...
Click to collapse
Hi Rickyjune
I don't know anything about security wallet - perhaps it's one of those things that locks up your files and applications, but without knowing about it I cannot guide you through a fix.
I assume you do not have a backup taken before you installed it? or even whether you can access them if you have? (This would be a solution perhaps if you have)
I'm not sure whether your applications are all working or disappeared or locked or what exactly. Sadly if it's in a real mess, I can only suggest a hard reset that obviously will remove everything back to the way you first got the device Would obviosly mean re-installing all your customisations and programmes you've added. It's either that or wait to see if anyone with security wallet helps out. Does security wallet have a help line or e-mail support etc.
Mike
more info
hiya
its called Flexiwallet for secure info and it didn't install
my programs are still on my storage card and windows and everything is working
except can't install and can't sync with activesync
oh and no list of programs in Remove Program list
rickyjune said:
hiya
its called Flexiwallet for secure info and it didn't install
my programs are still on my storage card and windows and everything is working
except can't install and can't sync with activesync
oh and no list of programs in Remove Program list
Click to expand...
Click to collapse
Ok I'll do some checking but I may not get far. See if you can get in touch with them.
Mike
Hi
I'm not sure this is the right one Flexwallet without an "i":
if it's the right one I see you can contact them or use the webis forum:
http://www.pocketinformant.com/Forums/index.php?showtopic=10016
http://www.webis.net/support.php
http://www.webis.net/whatsnew.php?type=FW2006&version=509&Product_Version=FlexWallet%202006%20Rev%203
Mike
Its The Right One But
It didn't install on my mobile
its nowhere in the windows or storage card
the fact is i can't install anything
rickyjune said:
It didn't install on my mobile
its nowhere in the windows or storage card
the fact is i can't install anything
Click to expand...
Click to collapse
Still think it might be worth asking them a question, because I read a post on their forum - under beta testers I think, saying they got an error on install but that it had in fact installed!
You're only other choice is a hard reset unless someone else has an alternative
Mike
mikechannon said:
Still think it might be worth asking them a question, because I read a post on their forum - under beta testers I think, saying they got an error on install but that it had in fact installed!
You're only other choice is a hard reset unless someone else has an alternative
Mike
Click to expand...
Click to collapse
I can attest from experience that the only solution (at least that I've found) is a hard reset and rebuild or restore from backup.
My program list frequently disappears, recently twice in one day. I'm still looking for a solution to the problem, which is how I discovered this thread. I can't find a pattern and tips that I have received (my list is under a supposed limit of 50 and all of my Today screen programs are now moved to main memory) haven't panned out.
yep hard reset was the only way
Your rite DonB, i had to hard reset and install everything
wasn't pretty, but I have sprite backup now but I've had no problems and i've installed Flexiwallett
cant understand what went wrong
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
shadows of yesterday said:
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
Click to expand...
Click to collapse
can't help you or tell you the reason because you are not giving enough details about what you are trying to install, what is going wrong. How are you trying to install. Exe or .cab files. are you just getting error's during the installation
i tried to install .cab & .exe , but it says install unsuccessful, for example SPB & Battery status
mmmm
On what ?... is the cab on the phone or on the PC ???????
i tried both , but i couldnt
You have the HTC Touch Elf right? No cabs at all are instaling on your phone.
Possibiliites:
1. The cab files are being currupted either while you are downloading them or while you are sending them to your phone. FYI Cab files are to be installed via your phone not PC. Transfer the complete cab to phone and just click it to install - Do Not Unzip it. (A cab file looks like it is a zip file or a rar file wen it is on your PC but don't be fooled. it is a cab and does not need to be unzipped) you will only see a bunch of messy files and will just get confuzed. just place the cab on your phone and tap it with your stylus to initiate install
Exe's are to be installed via your PC to your phone through activsinc. place the exe on your desktop (Or wherever) and connect your phone to your PC using Activsinc. Then click the exe on your desktop and follow installation instructions - NOte you will have to still do some clicking on your phone to allow the installation.
2. you are not installing them properly and therfore follow instructions above.
3. your phone is currupt somehow (I don't see how) Try a hard reset and see if the programs will install after that. if not, you might want to return your phone for warranty (I am assuming you just got this phone and this is the first time you are trying to install something.
4. Maybe you have run out of room on your device to install any more applications (if you have been installing tons of other stuff successfully)
I have never gotten any errors installing cabs or exe's exept for when I was trying to install something that my phone did not support. (Not a valid WM application) or something like that.
Edit: You still are not give us much information - What type of error are you getting - What does your phone show/tell you?
Does it start to install and fail half way through? does it not start at all? does it install and the programs just do not run?
Tell us what program you are trying to install - what error you are getting and when you are getting it. Tell us the method you have used to install it etc....
If you want help you will have to provide us with as much information and detail as you can. Otherwise - Good Luck.
I will check back here regularly to see your response and try to help, but if you don't give us much more detail - no one will be able to help you.
Did you flashed your ROM recently?
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
shadows of yesterday said:
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
Click to expand...
Click to collapse
I don't know about battery status or wm router but TCPMP is an exe type installation. if you try to install this using your phone by putting the TCPMP installation on your phone and clicking to install, it won't work. You have to put the installation file on your computer, connect your device to your computer through activesinc. then click the TCPMP Installation on your desktop and follow instructions. Make sure you accept installation on your device when your device asks. The others may be the same
i did like that , but nothing changed , same message , install unsuccessful
shadows of yesterday said:
i did like that , but nothing changed , same message , install unsuccessful
Click to expand...
Click to collapse
Are you trying to install to your storage card or to device? Are you certain that you have enough storage space left?
Do you have any problems with Activsinc?
Have you tried downloading another copy of TCPMP - Maybe the copy you have is no good.
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
DuelMasterNG said:
Did you flashed your ROM recently?
Click to expand...
Click to collapse
You never answered the above question.
shadows of yesterday said:
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
Click to expand...
Click to collapse
I don't know if I can help you with this problem. I have never had any problems installing anything onto my device even when the app wasn't compatible. usually still installed, just wouldn't run. I am still using official stock WM 6.0 rom that came on my device. (have not ever flashed a new ROM or Radio and don't know anything about that. If you did flash a new ROM or radio, that could be what is causing your problems and you may want to examine in the thread where you got your ROM or Radio from for answers or to see if anyone else is having the same difficulties. Perhaps PM the person who cooked the ROM. If you havn't flashed any new ROM or Radio, then maybe you changed something in your registry that you shouldn't have with a registry editor (just a thought - don't know if you have ever done this) or maybe you have an app on your phone that is causing conflict when trying to install other apps. You can always try a hard reset of your device (if you don't mind starting from scratch again customizing your device) and then try installing TCPMP and see if it works right after a hard reset. That would suggest either something was changed in your registry or that another app was causing conflict. Bit of a pain in the a## having to reinstall everything(unless you don't have much installed on your device) and still no guarantee that it will work. Before doing a hard reset, you might want to look into backing up your device. (I don't know anyting about backing up - what program to use or how much it can back up such as setting or such but you might want to check it out. Also make sure you sincronize your device with your computer prior to hard reset so that all your contacts, appointments etc... are up to date that way after a hard reset you can just syncronize your device again and get your contacts and appointments etc... back.
If anyone else has any suggestions here -- Please feel free to jump in. I know that I would be really annoyed not being able to install new apps to my device.
Good luck. I hope this gets figured out for you
Rod
i had the same problem, it was unbelievably frustrating, i had to restore my X1i to factory settings, that fixed the problem.
I think you should follow hotrod101's suggestion and do a hard reset. Its quite likely that your phone has malfunctioned or something. It's probably going to save you a lot of work in the long run. Or turn in your device in one of the HTC service centers as already stated. Don't forget to back all your stuff up first.
Good Luck.
thanx alot
you did not say whether your rom is original or coked as i met some problems with cocked roms in installing arabic based applications that was easily installed before flashing me device
Did you get things figured out - If so please share with the rest what you did to solve your problem, in case others are having similar problems. Did one of our suggestions help or did you find another solution?
same problem on my Touch Pro, seams to be common ... some say that it is due to the fixed number (50 installed programs) on the touch flue ... however, I have no more information of how did they got this result, or what is the registry of this issue???
I hope if someone help on this to avoide us the headache cused by hard reset, just thinking about it make me crazy.
even hard reset is not a solution.
Hi,
I've been trying to install gyrator and got this message so tested several other CABs and now seem to be getting this message on trying to install any CAB - really frustrating
Any ideas what might be causing this?
My Blackstone configuation is all pretty standard with original ROM etc
Any suggestions welcomed!
try reinstalling the cab again, it should say that it will remove previous installed version and will reinstall, BUT it wont proceed with the installation. Now after this, go back to the remove programs section and check if its still there.
Wondering if you found the issue, as i have this happening over 4 or 5 different ROM's, ruled out that its a ROM issue, trying to narrow it down to a 3rd party app, unsucessful so far.
When trying to install ANY cab i get the 'unsucessful installation' error message - including cabs i've already installed. Flash my phone this morning, install apps i wanted to, went to install something else this evening, now getting this message.
I've got Sktools installed and i am able to install cabs via this.
Got that problem too on Xperia X1, can't figure out either what the cause might be. Anyone any ideas?
Found my cause - it was installing Twikini
n1ck75 said:
Found my cause - it was installing Twikini
Click to expand...
Click to collapse
so you can't install apps after installing twikini?
I'm getting the "uninstall unsuccessfu" for almost anything i try to install and do have twikini installed (but i can't remember if it was the last app i've installed).
Also i can't open attachments in my emails, can't download files from PIE and when i go to remove programs (start-settings-system-remove programs) the list is empty...
DId you have to hard reset or did u find away around this?
btw, i'm having these issues on my kaiser.
Finally I found what my problem was, even if I can't understand, why this is a problem.
From time to time, e.g. when I got no USB cable around, I used to send the .cab vie E-Mail to have them on my device. Well, and as a matter of fact, exactly those are the ones, where installation fails.
Copying exactly the same file via USB to storage card ends in everything working fine....
So i flashed a new rom and installed twikini first, everything was ok for a couple of days. But all of a sudden this problem is back.
I know its not the .cab files because they're the same cabs i'm trying to install that i install on almost every rom after i flash them.
I'm thinking its yahoo go.