Database Users

GPRS Monitor

I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?

Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.

No problem thanks for your help

dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz

Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.

Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.

It works a treat. Thanks muchly!

Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:

I also managed to 'locate' another copy and it works fine, thanks for all the help.

astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.

Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?

Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!

sorry ignore that post! Work computer blocked the file out

I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.

Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob

Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.

Tried it. Still get the problem :-(

My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.

Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.

I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.

Can't Install

Pls pls pls help
can't install anything anymore on my VArio II
can't sync with activesync either, whatsup

If you want help then something a little more detailed might help.... does it produce errors?!? what are the error messages, etc... it would be like telling your docter over the phone that you dont fell good... unless your doctor is psychic then he cant diagnose your problem without more information..

More Info As Req
ok
got wisbar and wisbar deskstop looks sweet
a few other odds and sods
but try to install security Wallet,shareware to try it out
and bam it just wouldn't accept it
when to try and uninstall it and my remove program list was blank
try to install a software from the CD that came with my VArio and it wouldn't install that either!!!!
really scared!!!!

rickyjune said:
ok
got wisbar and wisbar deskstop looks sweet
a few other odds and sods
but try to install security Wallet,shareware to try it out
and bam it just wouldn't accept it
when to try and uninstall it and my remove program list was blank
try to install a software from the CD that came with my VArio and it wouldn't install that either!!!!
really scared!!!!
Click to expand...
Click to collapse
Hi Rickyjune
I don't know anything about security wallet - perhaps it's one of those things that locks up your files and applications, but without knowing about it I cannot guide you through a fix.
I assume you do not have a backup taken before you installed it? or even whether you can access them if you have? (This would be a solution perhaps if you have)
I'm not sure whether your applications are all working or disappeared or locked or what exactly. Sadly if it's in a real mess, I can only suggest a hard reset that obviously will remove everything back to the way you first got the device Would obviosly mean re-installing all your customisations and programmes you've added. It's either that or wait to see if anyone with security wallet helps out. Does security wallet have a help line or e-mail support etc.
Mike

more info
hiya
its called Flexiwallet for secure info and it didn't install
my programs are still on my storage card and windows and everything is working
except can't install and can't sync with activesync
oh and no list of programs in Remove Program list

rickyjune said:
hiya
its called Flexiwallet for secure info and it didn't install
my programs are still on my storage card and windows and everything is working
except can't install and can't sync with activesync
oh and no list of programs in Remove Program list
Click to expand...
Click to collapse
Ok I'll do some checking but I may not get far. See if you can get in touch with them.
Mike

Hi
I'm not sure this is the right one Flexwallet without an "i":
if it's the right one I see you can contact them or use the webis forum:
http://www.pocketinformant.com/Forums/index.php?showtopic=10016
http://www.webis.net/support.php
http://www.webis.net/whatsnew.php?type=FW2006&version=509&Product_Version=FlexWallet%202006%20Rev%203
Mike

Its The Right One But
It didn't install on my mobile
its nowhere in the windows or storage card
the fact is i can't install anything

rickyjune said:
It didn't install on my mobile
its nowhere in the windows or storage card
the fact is i can't install anything
Click to expand...
Click to collapse
Still think it might be worth asking them a question, because I read a post on their forum - under beta testers I think, saying they got an error on install but that it had in fact installed!
You're only other choice is a hard reset unless someone else has an alternative
Mike

mikechannon said:
Still think it might be worth asking them a question, because I read a post on their forum - under beta testers I think, saying they got an error on install but that it had in fact installed!
You're only other choice is a hard reset unless someone else has an alternative
Mike
Click to expand...
Click to collapse
I can attest from experience that the only solution (at least that I've found) is a hard reset and rebuild or restore from backup.
My program list frequently disappears, recently twice in one day. I'm still looking for a solution to the problem, which is how I discovered this thread. I can't find a pattern and tips that I have received (my list is under a supposed limit of 50 and all of my Today screen programs are now moved to main memory) haven't panned out.

yep hard reset was the only way
Your rite DonB, i had to hard reset and install everything
wasn't pretty, but I have sprite backup now but I've had no problems and i've installed Flexiwallett
cant understand what went wrong

How do I Re-installing WM5 on my Atom exec

hello guys,
im kinda frustrating here..
my atom exec runs not smoothly lately..i've tried to un-install programs from my device but still its doesnt run smoothly like before..
i'm planning to re-install my WM5 and install a new one on my device, can i do that with simple steps like any other Desktop computer usually have??
one more thing, i have a thought about what causing my problem..there's a file name MN1Ril.txt in my device's root and i noticed that it kept eating up my internal memory slowly..now, its size is 52mb and keep getting bigger everytime i see it..
do u guys know what it is? i try to remove it but everytime i try to remove it, it said that it has a sharing violation..i dont know what that means..
please help me..

i'm planning to re-install my WM5 and install a new one on my device, can i do that with simple steps like any other Desktop computer usually have??
Click to expand...
Click to collapse
What does that mean, if you're refering to the flash procedure, just connect to A/S and execute the DSUU of your choice, or depending on your bootloader put the device into bootloader mode then flash.
one more thing, i have a thought about what causing my problem..there's a file name MN1Ril.txt in my device's root and i noticed that it kept eating up my internal memory slowly..now, its size is 52mb and keep getting bigger everytime i see it..
Click to expand...
Click to collapse
A 52MB txt file? are you sure? if you put your Atom Exec into bootloader mode (camera+reset) what is the version..eg. MN1? or MN2?

yes, it has size over 52mb..its extention is .txt..it is a virus or something? i try to delete it but i cant do it coz it said sharing violation..
i want to re-install my WM5, im a newbie and i really dont know any procedures like u said..
i have un-install all of the programs in my device, and i try to delete it in safe mode but still cant do it..
is it a virus or something coz last time i saw it, its size is 52mb from 49mb..
i want to post a screenshot but i dont have a program that can do a screenshot on my device..
perhaps its better if i re-install my WM5, dont you think so?

Ever trying the hard reset? pls backup yg personal data and fav applications first before perform the hard reset.

nope, i havent try to hard reset it..how do i do that?? ( sorry im a newbie )
is it going to solve my problem? i mean, is it going to remove that file?
does anyone know how to remove that file? coz its killing me..
now my device runs more slowly than before..i hate it!
is there any program/application that can erase or perhaps give me an information about that file and which program or apps that use that file?

quicksilverye said:
nope, i havent try to hard reset it..how do i do that?? ( sorry im a newbie )
is it going to solve my problem? i mean, is it going to remove that file?
does anyone know how to remove that file? coz its killing me..
now my device runs more slowly than before..i hate it!
is there any program/application that can erase or perhaps give me an information about that file and which program or apps that use that file?
Click to expand...
Click to collapse
Since you are a newbie, I suggest you read the XDA Atom wiki. It will answer most of your questions.

My HD2 is very unstable with different ROMS. Help please

Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.

I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).

What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse

tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse
try the strenas rom (arthemis V2). It has solved my pb

[email protected] said:
I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).
Click to expand...
Click to collapse
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?

willbread said:
try the strenas rom (arthemis V2). It has solved my pb
Click to expand...
Click to collapse
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.

dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
Click to expand...
Click to collapse
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.

tommyjakobsen said:
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?
Click to expand...
Click to collapse
When you flash lots of cooked roms, they get "bloated" and the devices started hard-resetting for no reason. this is because of files from old roms being left when the new rom is flashed.
MTTY allows you to enter the device on bootloader and use service commands to format the file system on the device so you can remove all rom files before flashing a new rom!!
Click to expand...
Click to collapse
basicly it will format your system and make sure you don't have any files from older roms left on the system which might cause this issues.

tommyjakobsen said:
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.
Click to expand...
Click to collapse
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets

Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...

Petulinek said:
Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...
Click to expand...
Click to collapse
and for me, this didn't help me

willbread said:
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets
Click to expand...
Click to collapse
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.

I had this "freezing during startup" with a number of roms (always after I installed my software) and since that I am always "tweaking" it by the startup order as I described it and was able to solve it!
I do not think that it is hardware related in the amount of cases which are reported. And I am also not a strong believer of this "flashing" and mtty discussion (it could be a solution is some cases but I do not think in this relatively larger number of cases which are reported).
For most of the rom cookers it is not the 1st rom cooking they are doing and the HD2 is not the 1st HD2 device for HTC as well. This is the reason why I do not think that there is a principle rom problem nor a principle hardware problem
Manila Sense is a complex pcs of software and the startup is therefore more complex.
Depending on the tweaks the rom cookers are doing on the XIP and other WM internals there could be a timing interfearance during booting and this is creating the trouble for Manila Sense startup (network, phone, etc.).
Reminds me to the "good old days" with ATART-ST where you had dedicated tools to rearrange the startup seaquenze of the Accessories
At least i think it is worth trying it, you cannot loose anything.
But I played not only with the finaly boot order of htc-Sense (the last one) but also I put other elements in a different order.
Sometimes it was helping to install Panolauncher and put it before HTC Sense startup - I had the impression that just having another application before HTCsense made an improvement to "give HTCSense" more time.
Does not sound like science but a little bit like Voodoo ...
My Autostart folder (only the applications)
1. poutlook.lnk
2. BTTrayCE.lnk
3. De|WMPTempFolder.lnk
4. PKG.lnk
5. Lotus Traveler.lnk (installed by me)
6. LotusPRUploader.lnk (installed by me)
7. Panolauncher.lnk (installed by me)
8. OM10QS.lnk (installed by me - Opera 10 beta)
9. HTCStartUp.lnk
Good luck
dingolino
tommyjakobsen said:
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.
Click to expand...
Click to collapse

gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out.
Click to expand...
Click to collapse
i haven't the folder "\Application Folder" on my card. Maybe, this is why this rom works well
I haven't verifyed before so i can't tell you if i had it before

Hi,
could you try to flash ROM that have manila 1921 (manila without document tab),
I facing so many problem when I install ROM with manila 1922 (manila got document tab)
Now has been 4 day, without any problem flash ROM with manila 1921...
give a try...

mtty may help u out

dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
dingolino
Click to expand...
Click to collapse
so i just got the last version of sktools.....could anybody please explain how I can change the startup order? sktools has allot of tools and I just cant figure out how its done!
thanx!

Hi,
sounds to me like you have flashed so many times you HD2 has become "Bloated"
this is where for eg, Rom X is 110Mb, and then you Flash Rom Y which is only 100Mb.
When you do the flash there is 10Mb of residual files left from the previous rom., when this happens often you get strange things happening like you describe and worse, your device can start hard resetting for no reason!!
Go to this thread (swap the ** for tt ) h**p://forum.xda-developers.com/showthread.php?t=616422 (I cant post links yet!!) and it will fix your issue. (The thread has been shut as there has been a big argument over it, something to do with a disagreement over drivers!! - how gay!)
I can honestly say, although i have only joined recently, i have been a user of this method for about 6 years, I personally know the Guy who opened the thread and i would stand buy him 100%.
Although the thread is closed, i will help with queries via PM if you like!
SS

gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.
Click to expand...
Click to collapse
I tried deleting the \Application Folder folder and reset the phone.
Of course this equaled a hard reset as all system data stored was in \Application Folder.
So I removed my storage card and did a hard reset so that the system data will not be stored in the storage card.
Hopefully this will be make the device more stable as such.

use the mtty to format ur device first, then flash the rom u want to flash.
I have encountered the same issues just like u, after use the MTTY, so far so good.
the post is kind of complex, but it is worth to have a try.

ROM Upgrade & Windows Update

First problem i have, whenever i try to use the windows update i get the following message:
Connection to update server was not available. Check our data connection settings and ensure the device date and time are correct.
Click to expand...
Click to collapse
Date & time is correct, mobile connects to websites ok so i dont see why it wont connect?
while googling this, i found theres a ROM upgrade for the phone aswell, do i need it? the phones 6months old and has ROM version 1.56.405.1
The main reason im wanting to use windows update is because i've tried to install a couple of apps and it tells me i need an upgraded .net framework, is there any other way to do this? and how can i find the latest version?
thanks if anyone can help.

dont waste your time...
in short ,dont waste your time with windows update,it is not used ,at all.
windows update (according to interviews on FACEBOOK..windows mobile, with relevant persons from MICROSOFT.....) is only for very crictical updates and they have never used it ,(as far as i know...?)
best is to navigate to htc website ....
http://www.htc.com/mea-en/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
..make sure to select your country ..top right of webpage ,
note, above link i provided... is for htc middle east and africa...and upgrades might not be applicable to your country...!!!!
the .net issue is seperate issue..has got nothing to do with upgrade..!!..
it is used for certain applications to function...
, google for ..something like ...."netcf 3.5 download "....or/
try this link and make sure it is what you are looking for.....!!!!!
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
follow link..it will take you to microsoft web page (dont worry, it is a free applications ) ,but be aware ,the application is about 33 megabytes,and download it to your pc.
afterwards , you have to connect phone to pc and install from pc.to phone..reboot phone and you application should work.?
( do not try and install from phone ,it wont work )
good luck
willcor

From what I can see you already currently have the latest ROM upgrade that is also available via HTC's website, so there is no need for you to download and install it again. At the time, the ROM was released to improve the overall functionality of the phone and fix some existing issues with it.
Here is what the ROM upgrade contained:
Improved Functions and Fixes
1. Updated the Connection Setup Database.
2. Improved emergency call connections while using Airplane Mode.
3. The GPS position updating speed has been enhanced.
4. A Title bar display flicker in TouchFLO 3D has been corrected.
5. Fixed multiple browsing issues.
Go to this link, and download and install the NETCFv35.Messages.EN.wm.cab to your device. After you installed NETCFv35.wm.armv4i.cab, reset your phone.

thanks alot guys, appretiated

Since installing this, im getting quite a few error reports
"A problem has occured with... please tell microsoft about this program"

Reflashing the rom might help.

lemzip said:
Since installing this, im getting quite a few error reports
"A problem has occured with... please tell microsoft about this program"
Click to expand...
Click to collapse
In that case, (if i was in your shoes) i would try to hard reset first then install the .NET cab first and then any other programs you want afterwards. Then hopefully those nasty errors will disappear