inet - 8125, K-JAM, P4300, MDA Vario General

I'm trying to connect to inet via wifi (or activsync) and get
"the address is not valid. check the address and try again"
Any ideas?

no internet connection
no dns settings
invalid ip settings
firewall blocking
Take your pick!
Most likely you haven't allowed passthrough to the internet from activesync and your wifi is set as "my work network" not internet. Alternativly you may need proxy settings. More info from you is required to fix tho

Well.. interesting development.
IE with GPRS doesn't work.... yet msn messenger does...
It just doesn't attempt to connect to GPRS at all and says the above message...
HELP!
If i connect to wifi, I am connected to network, just IE doesn't work.... ergo internet....
Anyone?

Even when connected to gprs (if I connect via hotmail)... PIE still won't load pages and gives the stupid error.
Someone MUST be able to help.

Check your DNS settings

Related

Automatic VPN connection

What is it that triggers the VPN to connect? As I understood it it was trying to connect to a private IP - however, if I use ActiveSync to connect to 192.168.10.16 it doesn't try and connect. In fact, it rarely tries to connect even if I goto Connection -> VPN and try "Connect" - it just makes a GPRS connection, but doesn't even appear to try and connect to the VPN.
Anyone got any ideas?
Thanks.
perhaps the active sync program isn't triggered to connect through VPN when connecting to a "excluded" adress, and all the other programs are?
a

Activesync passthrough not working..

PROBLEM SOLVED, APPEARS TO BE A NETWORK ISSUE
New question posted in second post.
I've searched the forums and the internet extensively without any help so here I am, asking for the community's help.
I can activesync just fine (ActiveSync 4.2) and am able to connect to the internet just as well from my Wizard via WiFi however I am unable to access the internet from my Wizard via ActiveSync passthrough.
I have selected "This computer is connected to the internet" in ActiveSync and, when viewing my network connections, I see the ActiveSync connection is in working order (IP address: 169.254.2.2).
I am unable to connect to the internet as well as my LAN because I tried pulling up my router's web interface in PIE only to receive this error:
"Unable to connect due to an unknown error [some crazy error number]."
I'm unable to connect to the internet with any application (tried sending email, updating pocket weather, egress, etc).
I've also uninstalled and reinstalled ActiveSync.
I haven't always had this problem and I can only think of two things I've done in the interim: I'm at a different house thus my desktop connects to a different network and I've installed (and subsiquently uninstalled) HitchHiker b.41.
Anyone have any ideas?
it is a network issue..
EDIT: I'm ridiculous.
After trying it out at work, I'm left to assume that the problem is a network issue (I'm able to connect at work).
This, however, brings me to a different question. I currently have four network connections set up: Blank, MEdia Net, My Work Network, My ISP. I have "Blank" set as the connection to use for both programs that connect automatically to the inernet as well as for those that connect automatically to my work network EDIT: this is my problem ... I had to set up "programs that connect to my work network ..." to use the work network connection (obvious?) I always assumed this meant programs that would only be accessing my work (I.E. a VPN client).. My question is that in order for me to connect to the internet from work, I have to add my proxy settings to the "Blank" connection. Adding them to the "My Work Network" connection does nothing. This leads me to believe that setting the "This computer connects to ..." dialog in ActiveSync accomplishes nothing. Can anyone help me with this? I'd like to connect using my work proxy while I'm at work and no proxy while I'm at home (is that too much to ask) but, apparently, selecting the appropriate value in the "This computer connects to" dialog in ActiveSync isn't enough.

ppc (using USB activesync cable) to access the internet thru LAN?

i have an i-mate Jasjar wm5, I am using USB activesync cable to connect my device to my desktop PC. I would like to access the internet using LAN-DSL in my office.
Any idea or suggestions on how to do it?
Suggestions, insights, or any kind of guidance is highly appreciated.
unless you have set it to block it
then your device connected to activesync will allways have the same
lan network access as the pc
you prob have to change connection in settings->connection->connection advantage and pick mynetwork rather then my isp
Rudegar said:
unless you have set it to block it
then your device connected to activesync will allways have the same
lan network access as the pc
you prob have to change connection in settings->connection->connection advantage and pick mynetwork rather then my isp
Click to expand...
Click to collapse
thanks for the quick reply. activesync (v4.5) is on the exceptions list of windows firewall, hence it is not blocked.
My Work Network connection settings (modem and VPN) is empty. do we have to input any settings on them (modem and/or VPN)? On the proxy settings - I checked the box for 'This network connects to the Internet', I did several tests on unchecking/checking the box on 'This network uses a proxy server to connect to the Internet' - tried both IP of my desktop PC (192.168.1.12) and default gateway (192.168.1.1) on ports 8080, 80. I noticed though - the box for 'This network uses a proxy server to connect to the Internet' - always goes unchecked everytime I go back to check the settings.
i did several test settings, but it doesn't worked either. always it says 'This page cannot be displayed, connection was lost check settings'
any idea on these? thanks for your time
guess you could try changing the dns to what the pc is using
and try with other applciations like the network tools ping
and messenger to see if it's a IE issue
I also want to connect to internet through activesync 4.5 usb
hi, i have the same problem, i want to connect to internet through activesync 4.5 and wm5 herms. i am not good a computer use so could you please guide me step by step. i can synchronize but can't use internet.
if its through the office network, you may need to play with some settings to "fool" the office network to let you out.
The way to check what im talking about is to download http://johnhaller.com/jh/mozilla/portable_firefox/ portable firefox, and see if it connects by default. In my office, i had to input the LAN proxy settings into firefox to make it work. If this is the same for you, then i guess you'll have to do the same on the PPC. If you do find that this is the problem, and you cannot connect with firefox, post back and ill see if i can help
Turn off "Advanced Features"
explorer2612 said:
thanks for the quick reply. activesync (v4.5) is on the exceptions list of windows firewall, hence it is not blocked.
My Work Network connection settings (modem and VPN) is empty. do we have to input any settings on them (modem and/or VPN)? On the proxy settings - I checked the box for 'This network connects to the Internet', I did several tests on unchecking/checking the box on 'This network uses a proxy server to connect to the Internet' - tried both IP of my desktop PC (192.168.1.12) and default gateway (192.168.1.1) on ports 8080, 80. I noticed though - the box for 'This network uses a proxy server to connect to the Internet' - always goes unchecked everytime I go back to check the settings.
i did several test settings, but it doesn't worked either. always it says 'This page cannot be displayed, connection was lost check settings'
any idea on these? thanks for your time
Click to expand...
Click to collapse
There's a setting in ActiveSync "Advanced" and uncheck the box. See if that helps. It apparently has helped others with USB connection issues.
rightclick on ActiveSync icon on systemtray --> connection settings... ---> config as my pic you can access internet thought your PC. If you still can't connect to internet please hardreset your PDA

Internet via VPN & WIFI

I nerver really understood Microsofts concept behind the Internet / Private Network differentiation in WM, therefore i got a small problem right now.
What i would like to do is browsing the internet using PIE in the following network environment:
An accesspoint provides access to an unsecured wifi containing nothing but a pptp vpn server. The vpn then allows accessing the internet.
Currently i got managed to connect to the wifi and to properly set up the vpn under the "my work connection" settings. when i manualy connect to the vpn the connection gots established. The problem is that this only works if:
"Programms that automatically connect to the Internet should connect using:" is set to "my isp" and
"Programms that automatically connect to a provate should connect using:" is set to "my work network".
this of course lets the vpn collapse when the pie is running, because it is configured to use "my isp" instead of "my work connection".
When both options are set to "My work connection" mannually connecting to the vpn leads to a "cannot connect with current connection settings[...]" error.
any ideas?
Hi
go to connections then advanced, then go to exceptions and add a new url
add
*
and
*.*
then it should route the connections via the VPN and not disconnect it
Regards
works for PIE!
thank you!
(is there also a solution for the messaging (email) application?)
should do emails too
I havent used VPN for a while so might set it up and try it again if i get some time

Your PPPoE or PPTP authentification failed.

i bought a new router but i am not able to connect through it
i have a PPPoE connection ISP has provided me with the user name & password i have entered the same in the router settings page but cant connect, get the same error on the mobile as well.
i have attached images of the error as well as how i connect to my internet incase u need to see.
i can connect without the router to internet with the same username and password but when i connect through router i get error Your PPPoE or PPTP authentification failed
Anyone know whats wrong ?
come on no one ??
ignore the top posts
i get my isp provides me with connection from a router which connects through a switch and the to me now i have bought router so that i can access internet on my mobile through wifi how do i configure my router to do that ?
basically you dont know how to setup a home network,
did the router came with the provider or did u use a third-party router?
if so you need to setup your 3rd party router,
call the provider so they can provide the protocol encapsulation in which you will need to setup your router

Categories

Resources