Database Users

Hard buttons config

Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!

nero said:
Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
Click to expand...
Click to collapse
Hopefully Keys attached
Mike

many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?

nero said:
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
Click to expand...
Click to collapse
Yes, until now I had not noticed that but that is indeed true on mine. I have also not carried out any customisation or even reset any of these buttons (well since last HR anyway)
Mike

Hi again Mike!
Ok, I've deleted the "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" key and now the power button works perfectly.
I have wisbar advance 2 installed and probably, somehow I think, messing arround in his settings has created the power button mapping and that makes his behaviour anoying...
Maybe this is a solution for some other people with this problem. I've seen there are more people in the forum with the "power button problem".
Many thanks.

Power Button
Good news.
Had not seen others with the problem of the "power button" but if I spot them I'll link to here and by repeating power button problem hopefully searches will lead here!!!!
Mike

checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore

nero said:
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
Click to expand...
Click to collapse
Well now, I wonder!
Perhaps you could write up a detailed piece on exactly what was happening and then the exact detail of what you did/changed. I have a pretty good picture but if you get the time the old blow by blow account would be useful.
Cheers
Mike
going to bed now-enough problems for one day!!!

Mike,
sorry but I dont know exactly what you want to say with "old blow by blow account". My native language is not english and I dont know that expression.
I can say that my power/toggle screen button becomes "non responsive" in the past couple of days, sometimes works after 3/4 presses or after a long press but other times I need to do a sw reset pressing with the stylus in the reset button/hole.
What I did to fix this malfunction is what I've described in this thread's 5 post (here)
I've used resco's Registry Editor and deleted the key "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" and all of it's contents.
Now the power/toggle screen button works perfectly!
If you need some more information, just do has one of our tv commercial
"explains it as if I am too much donkey"
Cheers,
Nero
I'm from Portugal.. same GMT, sweet dreams

Would this make it in a wizard too?
Hi guys, I have a wizard with the power button inoperant, everything else looks work fine... I tried several tricks given in the forums and those are great to power it off but not for turning on the phone niether the display on. Would this make it in the wizard too?

Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V

Hi Guys,
does anyone know how to reconfigure the video-call button (the little button above the green button). I don't use this one, en would like to give it another function)
Thx!

Thanks VJ
vijay555 said:
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Click to expand...
Click to collapse
Thank you Vijay I took a look to the 8125 registry and is quite different, i´m afraid this wouldn´t work for the Wizard. I´ve tried also a couple of your programas (VJKeypress and VJEscahaton) but can´t help either, my problem is to turn the phone on (i´ve been using softreset during a connection to the power supply) and all indicates that this is a hardware issue... any thoughts?

Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V

It died like a hero....
vijay555 said:
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
Click to expand...
Click to collapse
I follow your advice and @ 80% of flashing stalls for awhile with the progress bar in red, after some minutes proceeded turning the progress bar in blue color and @ 95% progress I got ERROR326 : INVALID COMMAND "With the legend "This NBF file can not be used for your phone. Please check your NBF file" The screen was white with the 95% progress bar and lost connection with the PC, I tried a softreset and what I got was the tricolor scren with IPL / SPL data and RUU at the top right. I´m afraid that we have another G4 casualty...
And few hours later.......
I reflashed the phone with RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4 this time it went to the 100% progress and the congratulation screen for a succesful flashing, however stalls in bootloader screen (this time without the RUU inthe top right), whenever I do a softreset (since the on / off button still is not working) The HTC innovation splash screen shows up, then disappears and my Wizard returns to the bootloader mode. I think I should be moving to the Wizard forums, thank you VJ!

Odd icon in Phone screen

Hello all. My first post on these great forums!
I have an odd issue with a branded HTC TyTn.
There is an icon in the Phone screen underneath the 'X' close button. It is like an eye with half an arrow pointing right.
I have attach a screenshot so you can take a look.
Any ideas what it could be at all?
Many thanks.

Could you please post:
When you bought it, the ROM version, OS version and date etc....

oh yeah, i had that as well. i have since upgraded to wm6. I wonder what it is.
oh, i have a m3100 on orange UK. It did have the original orange rom.

Here is some more info....
WM5
ROM : 1.18.225.3 (07/22/06)
Radio : 1.03.03.10

lyceum said:
Hello all. My first post on these great forums!
I have an odd issue with a branded HTC TyTn.
There is an icon in the Phone screen underneath the 'X' close button. It is like an eye with half an arrow pointing right.
I have attach a screenshot so you can take a look.
Any ideas what it could be at all?
Many thanks.
Click to expand...
Click to collapse
Looks like a video camera (webcam) out icon to me. Does it indicate video calling enabled??
Mike

see in the \windows directory if there is a file called "carrierlogo.gif", it's normally used 4 the logo of the carrier. If there isn't a pic, so you can start to thing something else.... Make an Hreset, on the first boot, reset the ppc, unhide the extended rom (no UNLOCK, so only reg keys needed) and launch 1 by 1 the cabs rebooting on every installation.
When you've identified the cab, then is possible to know something

Registry help aligning Prophet screen

I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.

dkleuven said:
I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.
Click to expand...
Click to collapse
These values are unique to each device. If every device was the same, there would be no need for this!
From my ROM setup: 1839,1997 3118,684 3126,3328 577,3291 602,690

Thanks !
I know about the unique settings, but with your prophet settings I can try to come closer thn woth settings fora completely different device, and maybe tweak a bit more myself through remot registry editor.
Thanks again!

HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
1942,1963 3228,622 3197,3268 664,3267 675,653
Device G3
Rui

pls help me.... pls
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?

jhonnyyy said:
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?
Click to expand...
Click to collapse
You need a registry editor. If you just want to realign the screen, hold the windows hardware button and then press the centre d-pad button.

salll
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???

jhonnyyy said:
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???
Click to expand...
Click to collapse
Maybe a hardware issue...
Try using a registry editor (I'd use this) to edit the settings using those above... May not be perfect but may help....

touch pad lock

Hi guys, I have had the orbit 2 and orbit, now I have just got my hands on the Agnito (HTC Diamond. only thing im abit annoyed with is the lock system. Im unable to put the lock on. Can someone help me please. Also is there is a simple tool I could install.

There a plenty of locking programs, just have a browse through this forum.
If you are happy with the standard Windows lock then it's easiest to use a program called Long Press End Key. The program may already be installed on your diamond, try holding 'End Call' for 3 seconds or look in your settings folder.
If you set Long Press Endkey to always lock without asking then you can lock the phone by simply creating a shortcut to Windows\Endkey.exe - I have this program mapped to my left softkey.

Thanks dave,
I never realised that was there...that was my bad...do you remember the HTC weather home, on the orbit 2, is there something similer to that for the Agnito
How can i map that to the soft key?

R.A.G.S said:
Thanks dave,
I never realised that was there...that was my bad...do you remember the HTC weather home, on the orbit 2, is there something similer to that for the Agnito
How can i map that to the soft key?
Click to expand...
Click to collapse
The Diamond is my first Windows Mobile device so can't help there!
This freeware is a great way to map softkeys:
http://fantasticbytes.com/products/softkeymanager

Davey101 said:
The Diamond is my first Windows Mobile device so can't help there!
This freeware is a great way to map softkeys:
http://fantasticbytes.com/products/softkeymanager
Click to expand...
Click to collapse
NO WAREZ! READ THE RULEZ!

clampi said:
NO WAREZ! READ THE RULEZ!
Click to expand...
Click to collapse
It's freeware dude. It's posted on here somewhere also as a .cab.
@R.A.G.S - Read the rules dude. Have a search and browse before straight up opening a new thread. There are a multitude of locking programs on here: StylusLock, TouchLockPro, Long Press End Key (default), SensorLock and Pocket Shield (not free) just to name a few.

dickenz said:
It's freeware dude. It's posted on here somewhere also as a .cab.
@R.A.G.S - Read the rules dude. Have a search and browse before straight up opening a new thread. There are a multitude of locking programs on here: StylusLock, TouchLockPro, Long Press End Key (default), SensorLock and Pocket Shield (not free) just to name a few.
Click to expand...
Click to collapse
that would be a ware

clampi said:
that would be a ware
Click to expand...
Click to collapse
Comedy!

Touch Screen Answer Button doesn't work

Has anyone encountered this problem??
On an incoming call, I attempt to press "ANSWER" on the touch screen and nothing happens. Pressing "IGNORE" seems to work.
I have the following installed:
- Gyrator 2
- Diamond Tweak 0.5.3
- TF3D Configuration 0.6.7
- AppToDate
Could any of these be creating some form of conflict? I know I should probably delete one by one, but was wondering if anyone else has heard of this.
Thanks
Lee

Chek in: \windows\startup
What do you have?

Sergio PC said:
Chek in: \windows\startup
What do you have?
Click to expand...
Click to collapse
I have the following in Windows\Startup\....
- GAlarm Reload
- Personalizer
- poutlook
- Services
- Voice Command
Also, it seems to be an intermittent problem, which makes it even more frustrating!!

Nooo all good there I was wondering if you had a keydisabler, but you dont.
When things go sour on you phone you should preform a hard reset that solves all problems.
Greets.

I know this is my first post but my answer key became unresponsive when I changed the pressure sensitivity of my screen...
I used the values people posted on the forum and everything else was fine but the green answer key on the screen wasn't working properly. I changed the values back and it works fine now!

wolf peterson said:
I know this is my first post but my answer key became unresponsive when I changed the pressure sensitivity of my screen...
I used the values people posted on the forum and everything else was fine but the green answer key on the screen wasn't working properly. I changed the values back and it works fine now!
Click to expand...
Click to collapse
Could you please tell me where in the registry you made those changes so I could check the values. Also, let me know what values you have listed so I can compare.
Thanks