I have 400 mhz cpu i put 600 mhz with XCPUScalar and now i cant boot on my pocket pc. On each soft reset it hang on Ipaq screen.
Please help me
Related
Hi Everyone!
I'm new to mobile windows, I've recently bought a T-Mobile MDA Vario and discoveredthet I can't run SkyPe because of the processor speed...
So I've come across with OMAPCLOCK V2.0
I'vce installed it, and changed the speed to 216 Mhz
but when I check under hardware in device information the value doesn't go over 195 Mhz..?????
Is OMAPCLOCK not working? or the speed is not shown correctly in the hardware monitor?
Thanks for your help
Fab
Works for me just fine.
Don't worry, if you ran OC properly, then you are running at that speed. I am running at 240mhz and my hardware panel shows 195mhz. Using SKTools system information reports 260mhz!
OK, very good thanks!
I thought so....
cheers
Fab
All,
Immiersoft has updated the popular XCPUScalar application to v3.0 2007. Looks like OMAP support including auto-scaling is supported. I just upgraded to the latest version and installed on my K-JAM. Works great, including autoscaling!
More Info:
http://www.pocketgear.com/software_detail.asp?id=7325
WHATS NEW IN XCPUScalar 2007 v3.00:
New: TI OMAP Processor support and enhancements:
* TI OMAP850 and TI OMAP1510 processor support.
* Support for Cingular 8125, HTC WIZARD, DoPod 818 Pro, Qtek 9100, MDA K-Jam, HTC Prophet, i-Mate JAMin, MDA Compact 2, HP iPAQ hw6915, HP iPAQ hw6945, HP iPAQ hw6965 all HP hw6515 ROMS updated.
* AutoScaling for TI OMAP processors supported.
* Enhancements and fixes.
* Vista icons
Enhanced: Faster, Smoother and more Responsive auto scale engine:
Multiple Auto Scale engines supported, smoother scaling, reaction and performance time has been greatly improved, some PDA's could experience upto 5x faster response when scaling.
Enhanced: Wider Support for Windows Mobile 5 XSCALE PDA's:
* Protected mode support for wider WM5 compatibility.
* Better support for phone PDA's, hibernation mode support.
* Support for newer XDA Atom, XDA Atom Exec, HP iPAQ 6828, HP iPAQ 6515a, HP iPAQ 6515b, HP hx21xx, hx24xx, hx27xx, hx4700 ROM's, Dell Axim x51v, x50v, Treo 700w, Samsung I730, Mio A201, Mio A701, MDPNA and more WM5 Xscale PDA compatibility.
* Support for HP iPAQ 6515, i-Mate JasJar, O2 XDA Exec, Qtek 9000, Orange SPV M5000, Verizon / Audiovox / Sprint PPC-6700, HTC Universal clones, HTC Apache clones.
* Support for all resolutions, auto-resizing, landscape, portrait, and 240x240 screens.
* All known issues from earlier releases fixed.
Support for VGA / Quasi VGA PXA270 XSCALE PDA's:
If your PDA has its own power setting, please set it to "Maximum Performance" or a setting that is not "Auto" to prevent conflicts with XCPUScalar.
Autorecovery from soft lockups when using unstable speeds
XCPUScalar will now auto detect a soft lockup if speed was unstable and will automatically revert to your PDA's default speed after a soft reset.
Support from 100 to 728MHz and PXA270 processor support:
XCPUScalar now has support for all popular frequencies from 100 to 728MHz. PXA250 XScale processors can be scaled upto 500MHz and PXA255, PXA261, PXA262 or PXA263 XScale processors upto 530MHz at 265MHz bus speed and PXA270 processors upto 728MHz.
Change Colors of CPU Meter to match your Today Screen scheme Colors:
Change foreground and background colors of CPU Meter to match Today Screen schemes or task managers that XCPUScalar integrates with, like WisBar Advance, GigaBar or ICBar.
Total control of the Auto Scale settings
Take total control of the scale settings at a finer level, its fully configurable now in 5% increments.
Ability to add Power Off & Soft Reset Icon to Today Screen:
XCPUScalar allows you to install a Power Off / Soft Reset icon on the Today Screen for one click Power access.
Auto Start on Soft Reset:
Configurable option to Auto Start XCPUScalar automatically after a Soft Reset.
Anti Flicker Screen Filter:
This option was designed specifically for the Ipaq 39xx, Ipaq 415x, Asus A620 and some other PDA's that flicker when the speed changes. Enabling this option should virtually eliminate screen flicker.
Support for higher bus speeds:
Bus speeds upto 265MHz are supported.
Auto Scale with CPU load:
Power on demand, XCPUScalar will now automatically calculate the CPU load on your PocketPC and switch speeds automatically depending on whether an application requires less or more power. XCPUScalar will scale the speeds automatically and throttle speeds as applications demand power. XCPUScalar throttles down to idle speed when there is no activity giving you the maximum battery power consumption. You can assign your own speeds to different CPU loads as you desire.
XCPUScalar calculates all factors and normalizations automatically and takes the guess work out of using auto scaling.
CPU Meter and WisBar / ICBar / GigaBar or other TaskBar Manager Integration:
XCPUScalar will now install an animated CPU meter icon on your TaskBar (this is the blue title bar area), you can monitor the CPU load and speed when running any application. CPU Meter detects other taskbar managers and will install its icon in their taskbar area.
Health Meters:
At a glance look at all the vital signs of your Pocket PC at a click of a button for quick access.
Thats pretty darn sweet looking - not sure if its worth 20 bucks - because omapscaler is free but I really like the feature set. Time for a demo
I everybody
Somebody has already used XCPUScalar with the tytn ?
If it's yes could you give the best speed ?
Thx in advance
xcpuscalar works for pxa processors, hermes uses a samsung processor, so it doesn't work.
thx pof I suppose it's the same answer for trinity devices....
you can use only Pocket Hack Master - http://www.pocketgear.com/software_detail.asp?id=7258 , but only for underclocking device, to lower frequencies, you should have more battery life, but slower application. When I played with this settings I must HR my device, because he become crazy. you can overclock device only to few MHz, but you should have stability problems.
thank's for your advice sinmae
Hi friends, i wanted to ask only if "Skype" can be installed on Omap 200mhz processored QTEK S200 or not?
If it can be, i will buy that device but i used Hp rw6815 of my friend's a month ago, Skype was installed when it was bought from the shop, is it installed on Qtek S200 too when i buy it, if not can we download it from the web and install on Omap 200Mhz processored Qtek?
Thanks for u'r attention on topics...
Skype works ... in any threads you can found Regkeys for Skype, then it works with less CPU and you can use it over GPRS connections, with good Quality
Thank you for u'r attention...
And one last question, is there any "Rom or Cpu mhz limit" for SkyPe to be installed? For example, 128mb rom or 400mhz cpu!?..
Why don't you just use the Beta 2.2 which is also available for low power devices?:
http://www.skype.com/download/skype/mobile/
I currently have an MDA with BatteryStatus installed. I should be getting my 8525 today, will the overclock feature work on the Hermes?
i really doubt it, as far as i know it only works on OMAP processors. anyway, why would you need to overclock a hermes? it has a 400MHZ processor!
nope wont work as stated above different processor but all other funtions work as I have it on one of my hermes just can't overclock
go for latest Pocket Hack Master 4.30.047
manage to overclock samsung processor from 400 to 450 mhz