Hi, i have a problem with my Himalaya Gadget sold as XDAII, why does my XDAII always turn itself off when the battery remains under 30% without "lowbat" warning before? and it won't turned on until i pluged in onto the AC charger?
and another problem is, when im doing the multitasking more than 5 program, one of them or all of them are automatically closed, why does it happen?
please help explain to me, coz this problem bothering me so...
as a references, my gadget using
standart
ROM: 1.03.00 USA
ROM date: 09/24/03
Radio version : 1.05.14
protocol version: 1337.14
Related
I have recently purchased a Parrot CK3000 and a new MDA compact on T-Mobile.
At first all was fine, but after a couple of days, when you get into the car, the MDA would pair up with the Parrot but then take over the car kit as though a call is in progress. The stereo displays CALL and the music is muted. The only way to reset it is to turn the carkit off and back on again as well as the MDA.
I have hard reset the phone and the problem comes back after a coupld of pair ups.
Does anyone else have this problem, or know of a fix.
I have tested the carkit with a Nokia 6310 and it is fine, so I'm sure the problem is with the MDA compact.
I have :
Rom version 1.12.00 WWE
ROM date : 05/28/05
Radio version : 1.12.00
Protocol : 1337.42
ExtROM: 1.12.152 WWE
I noticed that Radio version 1.13.00 is out, but does this have anything to do with Bluetooth.
Parrot and T-Mobile tech support have had no luck fixing the problem.
Any help greatfully received ?
Thanks
Richard
Hi,
I have excactly the same configuration as you. I have ROM 1.12.01! Which Firmwareversion is your CK3000?
I have 1.13. The only problem with this version is a short heavy noise if i make a call. If your problem still exist after firmwareupgrade of your mda,
try to reset your CK3000 (press green and red button for few seconds)
and pair again.
Regards Yoshi
Thanks, I've just upgraded the MDA compact to Rom V1.13.00 WWE and radio 1.13.
I'll let you know if it fixes it.
Hi,
Is it possible to have bluetooth running without the radio (phone part) working? Whenever I try to turn on bluetooth it insists on me turning on the phone part also.
Is there a way to turn off the phone part without switching the device to flight mode?
Thanks alot.
hi borgs.. i hv no problem at all for getting my BT on while my phone is totally switch off.. im using 02 mini too.. no problem at all
spin_x said:
hi borgs.. i hv no problem at all for getting my BT on while my phone is totally switch off.. im using 02 mini too.. no problem at all
Click to expand...
Click to collapse
It depends on yr rom version. On newer rom version, switching off radio will switch off BT.
U can try PhoneAlarm from www.pocketmax.net. It lets U turn off the radio without affecting the BT
Thanks alot for the info.
My ROM versions are:
Qtek S110
Rom: 1.12.00 WWE (05/28/05)
Radio: 1.12.00
Protocol: 1337.42
ExtRom: 1.12.119 WWE
It looks like my ROM version is different to the information in the manual I have as, in the manual, it states that the phone can be turned off by holding the power button. On my machine, this turns off the backlight only, even if I hold it down for more than 5 seconds.
I wonder why the newer ROM versions don't allow bluetooth to be on without the phone. My reason for wanting this is I intend to use the device with a bluetooth GPS whilst hiking and, if I'm not near a mobile transmitter, this will run down my device much quicker.
I'll give the trial version of that software a try.
Thank you.
the developer maybe was in unclear state for this new version,haha
jackleung said:
spin_x said:
hi borgs.. i hv no problem at all for getting my BT on while my phone is totally switch off.. im using 02 mini too.. no problem at all
Click to expand...
Click to collapse
It depends on yr rom version. On newer rom version, switching off radio will switch off BT.
U can try PhoneAlarm from www.pocketmax.net. It lets U turn off the radio without affecting the BT
Click to expand...
Click to collapse
Thanks for the info. I gave PhoneAlarm a try, unfortunately it doesn't seem to work. I set a profile that had the radio off but the bluetooth on but when I switch to the profile but I cannot get it to work. It seems that on my ROM version the radio has to be on for bluetooth to be on - which to be honest is just sheer dumb.
Can you please tell me which versions of the ROM components I need and where I can get them please? I have a Qtek S110 UK - doesn't seem to have any phone network configuration on it.
Thanks
Here's a reply I just got from Qtek:
Hi Steve,
you are cotrrect - the Bluetooth works independently from the phone. please go back to your point of sale and raise this issue with them, the return is their responsibility. Kind regards, Robin
-----Original Message-----
From: Steve
Sent: 06 January 2006 08:47
To: QtekUK
Subject: Enquiry from QtekUK
Hi,
I recently purchased a Qtek S110. I am finding that the device will not allow me to have bluetooth on when the radio (phone part) is not on. This is no good for me as I intend to use the device with a bluetooth GPS whilst out hiking. If the radio stays on then my battery will drain really fast as I will be nowhere near a phone transmitter and it will be using large amounts of power to communicate with one.
Other people tell me that their Qtek S110 allows them to have bluetooth on when the radio isn't on. To be honest this is how the phone should work, bluetooth should have nothing to do with the radio part, and I am very surprised that mine doesn't that way.
My firmware is:
ROM: 1.12.00 WWE, Radio 1.12.00, Protocol 1337.42, ExtrROM 1.12.119 WWE
If this can be fixed with a new firmware then please tell me how I do this and where I find them as I can find no mention of firmwares on any Qtek site. Otherwise is there any other way of having bluetooth only on?
Thank you,
Regards,
Steve
-----
So, they want me to send it back to my supplier but to be honest, I don't actually think its faulty - just a faulty ROM. I can now see a struggle between me and the supplier. Any ideas?
Cheers,
Steve
Ok, thanks to jackleung and kta I have now managed to get Phone Alarm to have bluetooth on and GSM off. I guess, either I was using an older version, or I wasn't quite doing it right.
But I can now confirm it to work. Seems like Qtek don't know what they're talking about or at least some firmwares may do it when others don't.
But the good news is that I don't have the hassle of returning the machine or risking flashing the firmware. £10 for the new software is far easier.
Thanks again.
There is a registry hack in this thread that sorted the problem for me and my Alpine, although the hack was currently posted in the Magician forum.
Cheerio !
Help - I have both a Qtek 9090 and a Vodafone V1620 which I use a Jabra BT250V Bluetooth headset with. I have been using all day and then all of a sudden the Bluetooth will disconnect and I can not Longer connect my headset to the PDA.
I have tried a soft reset, unpairing the headset and recreating it but nothing seems to work.
Also I have a collegue who also is having a problem where he can hear the person on the phone but they cannot hear him.
here is the Device information for both devices
Vodafone V1620
Rom Version: 1.31.00 WWE
Rom Date: 12/13/04
Radio Version: 1.12.00
Protocol Version: 1337.42
ExtRom Version: 1.31.175 WWE
Qtek 9090
Rom Version: 1.40.00 WWE
Rom Date: 03/10/05
Radio Version: 1.12.00
Protocol Version: 1337.42
ExtRom Version: 1.40.147 WWE
Does anybody have any ideas if this is the PDA's or the headsets
I just recently bought the Jabra BT250v.
The experience is that it is not as good as the previous model BT250 / BT258.
Everytime after softreset, the connection will disconect even the BT icon (not headset icon) is there.
You then have to disable the bluetooth connection and enable it to get the connection back....(softreset is not required though cause u have already done...)
Hope this help..
Cheers,
Just to clarify, is your device (v1620) a Universal? Isn't it supposed to be the v1640? Here in spain it's called the v1640 but not sure from where you are.
If it is a Universal, pls post your POWER settings when running on Battery.
I have a MDA Pro with a benq-siemens BT headset and am having the same problems. My MDA seems to switch off BT after a call.
my power settings are that the phone shuts off when not used for 3 minutes. Does anybody have a solution?
HI Friends
I have a very very peculiar problem. I have a O2 Xda Mini purchased recently in Mumbai, India.
My ROM Versions:
ROM VERSION 1.11.00 WWE
ROM DATE 03/15/05
RADIO VERSION 1.12.00
pROTOCOL VERSION 1337.42
eXTrOM vERSION 1.11.922.WWE
Windows Mobile 2003 Second Edition Version 4.21.1088 (Build 15045.2.6.0)
Previously, when i receive a call, I am able to hear/speak without using a bluetooth/Handsfree Kit.
two days back, when i tried using the handsfree, everything worked fine when call was receieved.. After removing the handsfree, I am not able to use the phone without bluetooth/handsfree.
I tried various options for getting the things worked...Did Soft/Hard reset of the phone. still the problem persists.
When I try to go to Start > Settings >Phone and select a Ring Tone, I cant hear the same from the internal speakers.
But when someone calls me the same ringtone works fine ans i hear the tone without any issues.
Do you know if this is a known BUG with this firmware, or there is some corruption in the registry.
Please Help !!!
Thanx in advance ..
Manmohan
Hewlett Packard ..
India.
Hi,
I had similar problem today. I fixed this when I once again plugged handsfree with Magician switched on and then I removed handsfree (still with Magician switched on).
See also this thread:
http://forum.xda-developers.com/viewtopic.php?t=37185
dear all,
i am new to htc machines and pdas. i bought a used alpine (imate pda2) recently. it has an arabic enabled wm3 se
rom version: 1.111.00 wwe
rom date: 01/27/05
radio version: 1.03.00
protocol version 1337.42
ext rom version: 1.11.153
i have the folowing querries:
1. would changing the rom to wwe, non arabic, speed up the machine?
2. is a newer version of the rom available?
3. how do i install a backup os, like linnux on this machine?
4. should i stick to wm3 se, or is wm5 a better os? if so, will it work on this amchine and where can i get it?
5. after a long pause, say overnight, the machine takes a good about a minute to boot up, is that normal?
6. specs of the pda say that the battery has a standby time of 172 hrs, whereas the pda shows 182 min of time, adjusted, why the discrepancy?
7. lastly, the call duration shown on the machine is 28 min calls received, and 165433 min call outs. what is that?
if can get answers to these questions i will be grateful.
junaid
PDA2 Upgrade
i have da same system
PDA2
& i want to update it
1. maybe a bit as i believe that the arabic is a 3th party software running ontop of wm it use mem it would also use a bit of cpu power
if it would matter much i dont know
2 http://wiki.xda-developers.com/index.php?pagename=HTC_Alpine_ShippedOrg
3 http://wiki.xda-developers.com/index.php?pagename=Xanadux
4. no wm5 out for alpine
5. sounds like it had a hardreset
6. batt time is by no means a exact science nor is measuring it
or displaying it
7 sounds like a bug i would use search for "clear AND calllog" or something to see if there is a way to clear it