i have updated my o2 exec to the latest rom 113188 - JASJAR, XDA Exec, MDA Pro General

how do i get my o2 settings for gprs and mms again i have tried the cabs but they dont seem to do anything

I know you said you tried the cabs already, but when I upgraded my ROM, I used the attached cab to get my 3G access back..
HTH

Related

is it possible to change o2 xdaII into vodafone xda2 3g, and

and instructions on how to install develope) thnx rs special rom please\(have looked and cant find it anywhere} have found rom but instrcutions
not sure what you are asking do you want to make your xdaII do 3g/umts ?
if so then no it's a whole different tech so much like you cant turn your radio into recieving tv channels sound
you cant make a 2G device use 3G signals
or maybe you are asking to get cab files for preinstall gprs, mms and wap settings
or maybe you are asking how to change those settings on your device
hi i was wondering if it was possible to turn it inot a 3g phone , but then i saw the worlds first 3g phone is the xda exec, m8ty do u know the procedure i have to follow (instructions) on how to install the special developers rom, i cant find the intructions anywhere
the special eddition rom is only for wallaby devices(xda1) and it's far from the latest wallaby rom at that
click on wiki in the upper left corner and click on himalaya
and read how you flash a new rom on it
then click on wiki and clikc on the ftp guide page
go to the ftp and pick a rom of your choosing
and happy flashing
universal is not the first 3g phone it's the first windows mobile phone with 3g

To FIX WIFI, Going to reflash cingular ROM & test. Opino

i have failed miserably in the attempt to get wifi working properly on my 8125 with the new IMATE rom flashed.
i downloaded the original cinular rom from the ftp and am going to flash it back. I notice 2 files on the ftp, a zip and an rar, i assume they are both the same .nba file because of size?
I am going to use aWizard to flash it back. I am not sure how the splash image portion should be done, and i want to make sure i do everything right.
Anyone done this yet?
Once i do it i will post my results on the 3 routers i have curently, and my success at logging into them with the wizard with the SAME settings ive been trying with the imate rom.
Anxious for any responses. thanks.
Dan
good luck. I have been using the 2.16.9.1 WWE rom on my cingular 8125 since the day the imate rom was noticed on clubimate's site. I have connected to 2 different access points (Netgear WG302 and a dlink xxx??) The netgear uses WPA TKIP and the dlink does not use any encryption. Both work flawlessly. did you install any original cingular cabs when you were using the I-Mate rom?
Re: To FIX WIFI, Going to reflash cingular ROM & test. O
danrw84 said:
i have failed miserably in the attempt to get wifi working properly on my 8125 with the new IMATE rom flashed.
i downloaded the original cinular rom from the ftp and am going to flash it back. I notice 2 files on the ftp, a zip and an rar, i assume they are both the same .nba file because of size?
I am going to use aWizard to flash it back. I am not sure how the splash image portion should be done, and i want to make sure i do everything right.
Anyone done this yet?
Once i do it i will post my results on the 3 routers i have curently, and my success at logging into them with the wizard with the SAME settings ive been trying with the imate rom.
Anxious for any responses. thanks.
Dan
Click to expand...
Click to collapse
I had same problem after upgrading MDA pro with new iMate rom 1.30
I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.
Manually enter IP address could solve the issue?
ethorn said:
good luck. I have been using the 2.16.9.1 WWE rom on my cingular 8125 since the day the imate rom was noticed on clubimate's site. I have connected to 2 different access points (Netgear WG302 and a dlink xxx??) The netgear uses WPA TKIP and the dlink does not use any encryption. Both work flawlessly. did you install any original cingular cabs when you were using the I-Mate rom?
Click to expand...
Click to collapse
Same rom for me too. I can detect the routers but cannot connect...
I just ran K-JAM_WWE_216901_2169101_020710_ship.exe, let that instal, and also let the customizations install. Nothing else.
Any ideas?
is it not detecting, not getting an IP, or getting an IP but not getting out?
ethorn said:
is it not detecting, not getting an IP, or getting an IP but not getting out?
Click to expand...
Click to collapse
I have the same problem. In fact I started a thread about it a couple days ago. It connects, but doesn't allow data to pass (I do get IP Addy). I also can't use passthrough on the laptop.
I loaded a very few of the Cingular cabs and actually narrowed it down to one of two that totally killed my WiFi connection. However, if you find the thread I made, I also found a registry entry referring to a preferred connection, and MEdia Net was in there (I'm thinking is the problem, but don't know how to change).
Used aWizard and sucessfuly installed the Cingular ROM i got from the XDA ftp site.
WiFi works like a charm, with the same settings that the unit had with the new IMATE ROM. This is very upsetting!
Anyone have any clue why this is?
Also - since I am not using the IMATE ROM anymore, any way to restore the original boot screens, delete the HTC one, and the IMATE screen and replace it with the Cingular? Reason I ask is i need to exchange this phone within my 30 day return period because the keyboard is loose.
Thanks

flashed my t-mobile with qtek rom but..

so far seems fantastic BUT i cant send mms or receive and gprs dont work. tried a cab file i got from around the forum but still nothing. i really need at least gprs to work desperately.
oops t-mobile UK that is
Did you try this cab from this post http://forum.xda-developers.com/viewtopic.php?t=47745 ?
If you did and did not work try entering them manually from here http://www.mphone.co.uk/mms_wap_settings_t_mobile.html
tried the cab file but no mms send or receive as there isn't even a gprs connection. how can you set gpes manually? all i get in gprs is authentication and nowt else. :shock:
Yes go to settings\connections\conections\add new modem conection and sellect modem type - cellular gprs and all the other details are on the link i gave you on prev post.
oh mate that worked a treat. thanks a lot

MMS Missing

Hi
I had mms working on my imate jasjam but now it is gone from the pda completely, and I am unable to get it back has any one got a telstra mms cab that i can load onto it to fix the problem??? I have also tried the I-Mate JasJam 1.31.305.103 ExtROM - Telstra Australia Specific. This did not fix the problem

SPV m600

Hi there
I am new to this forum, I have purchased an SPV m600 on Orange from ebay, and I was woundering if I can upgrade the rom to T-mobile Vario. Has this been done before and will it work. If not please can soemone let me know where I can get other roms for this device. I am a t-mobile users, and the phone keeps on freezing when I enable push mail.
Cheers
The vario is the wizard while your device as you know is a prophet. Attempts to put wizard ROM on prophet "as is" were made with WM 6 but the results were unusable.
Chances are you will brick your device completely.
But note this: you push-mail problem shouldn't require a ROM change. All orange customization is in the ext ROM so try hard resetting your device, the soft resetting just after you finish all the calibration and stuff so the ext ROM wouldn't install. Then get the proper connection setting for T-mobile and see if it works.
Thanks for your help, are there any other Rom's I can install on that device ie, Imate or XDA. This way I will remove all the Orange setting of the device.
I have entered all the t-mobile gprs settings on the device, but it still frezzes every so often, but everything works still the web and email. I am not happy with the device fall asleep for 30 sec or so.
Cheers
Try the forum search for the Qtek 2.20 WWE ROM! This ROM is in english and have no Ext ROM from a provider such as T-Mobile or Orange! I think this would help you!
You must setup the connection data after finish installing manually but this isn't a big problem!
spv m600
Thanks for you help, if you come accross the link then let me know. I will do some searching over the weekend.
Cheers

Categories

Resources