flashed my t-mobile with qtek rom but.. - 8125, K-JAM, P4300, MDA Vario General

so far seems fantastic BUT i cant send mms or receive and gprs dont work. tried a cab file i got from around the forum but still nothing. i really need at least gprs to work desperately.
oops t-mobile UK that is

Did you try this cab from this post http://forum.xda-developers.com/viewtopic.php?t=47745 ?
If you did and did not work try entering them manually from here http://www.mphone.co.uk/mms_wap_settings_t_mobile.html

tried the cab file but no mms send or receive as there isn't even a gprs connection. how can you set gpes manually? all i get in gprs is authentication and nowt else. :shock:

Yes go to settings\connections\conections\add new modem conection and sellect modem type - cellular gprs and all the other details are on the link i gave you on prev post.

oh mate that worked a treat. thanks a lot

Related

TIM MMS problem and "unknown sim error"

I have jasjar with latest rom from imate.
I have two major problem with my operator: TIM
1. follwing all the instructions about MMS on the TIM website I still get an error, receiving and sending MMS
2. changing the pin, I get "unknown sim error". I tried with two different sim, an old 32kB and a new one 128kB.
Any other italian reader with kaskar and TIM?
thanks
Rosario
Hi, I'm Italian and I get it working.
You need to:
1) set a new connection (I put it in My Work Connection): name timMMS,select a modem:Cellular Line (GPRS,3G),Access Point name: mms.tim.it
2) go to mms configuration (it's in the menu in the messaging centre), and you put the data you can find here: www.i.tim.it/file/0,,774,00.pdf
So server name TIM_mms (or whatsoever), gateway 213.230.130.89, port number 9201, server address http://mms.tim.it/servlets/mms
connect via Work, and IMPORTANT: choose Wap version WAP 1.2, not 2.0 or it doesn't work
Ciao
I configured it in this way too. But no luck, I still get an error after 30 secs sending messages, or retriving it.
Very strange, same sim, same parameters but different phone and everything works great.
I don't understand why in some jasjar they work and in others they don't.
Do you get an error when you try to change the pin code to you sim?
thanks
ciao
anyone of you got the MobileTV working ... which are the RTSP addresses ?
rpingar, I disabled the pin code.
Maybe you should try this (I haven't a clue, but...)
Please pay attention to put it in WAP mode 1.2

is it possible to change o2 xdaII into vodafone xda2 3g, and

and instructions on how to install develope) thnx rs special rom please\(have looked and cant find it anywhere} have found rom but instrcutions
not sure what you are asking do you want to make your xdaII do 3g/umts ?
if so then no it's a whole different tech so much like you cant turn your radio into recieving tv channels sound
you cant make a 2G device use 3G signals
or maybe you are asking to get cab files for preinstall gprs, mms and wap settings
or maybe you are asking how to change those settings on your device
hi i was wondering if it was possible to turn it inot a 3g phone , but then i saw the worlds first 3g phone is the xda exec, m8ty do u know the procedure i have to follow (instructions) on how to install the special developers rom, i cant find the intructions anywhere
the special eddition rom is only for wallaby devices(xda1) and it's far from the latest wallaby rom at that
click on wiki in the upper left corner and click on himalaya
and read how you flash a new rom on it
then click on wiki and clikc on the ftp guide page
go to the ftp and pick a rom of your choosing
and happy flashing
universal is not the first 3g phone it's the first windows mobile phone with 3g

i have updated my o2 exec to the latest rom 113188

how do i get my o2 settings for gprs and mms again i have tried the cabs but they dont seem to do anything
I know you said you tried the cabs already, but when I upgraded my ROM, I used the attached cab to get my 3G access back..
HTH

please some one help me..i cant use my wifi after upgrading rom of dx900.. plz help!!

hi,
guys i downloaded and successfully upgraded the Acer DX900 Rom i found here,
the problem is every thing is going well and theres no problem with the rom
upgrade... the version i upgraded my phone is
oldSAP ACER DX900 553 Clean ROM temp.bin
the problem is.. i cannot surf internet in any way.. i can connect to my wifi router
and it accepts the password and it even connects successfully... but while i try
to surf internet explorer.. opera or youtubeplay it says cannot find modem..
or check your internet connection!
my modem configuration that i do from connection > advance > my isp etc.. all the
configuration is correct and according to my ISP..
only i cant surf net.. it wont allow me to surf the internet saying that internet connection
not found..
please help me guys! thank you for any kind of help!
fady.
i cant connect to my 3G Data Connection also.. it says check your
setting.. how can i set my phone plz help!!
thank you for any replies
fady.
Try turning "Data Connection " ON in Communication manager.
Hi
2 other possibilities: try a hard reset and try reflashing and if unsuccesful you should post in the relevant thread f i where you found this rom
Good luck

arcsoft 5.2.2.22 MMS problem on T5358+

Hi all experts.
I have a MMS-send/receive problem on my T5358+ phone.
I have installed Arcsoft 5.2.2.22 and put in all the required settings for MMS-server ect. It's running WM6.5, .NET ver. 3.7.
When I try to send a MMS, the phone connects to the GPRS-network through the created MMS-connection (Celluar GPRS and MMS-APN name) and then immidiatly disconnects.
The phone can use the normal GPRS connection (Celluar GPRS and internet-APN name) for surfing the net, updating weather ect. It works OK.
The problem only accurs on the MMS-connection.
I know the settings for the MMS-connection is OK.
I have the same settings on another WM6.1 phone with arcsoft 4.8, and it's working OK.
If I set MMS-retries to 3, the first try disconnects. The next try does not disconnect, but no data is sent. the last try dis-connects.
Can you help me in the right direction to find the error ??
THX in advance.
Regards
Sthh
Hi all
Found the solution.
I had run into the WAP-bug.
It's all explained here:
http://forum.xda-developers.com/showpost.php?p=3815864&postcount=218
I haven't searched enough in the forum before I posted. Sorry.
Stha

Categories

Resources