Screen Protectors - JAM, MDA Compact, S100 General

Ive just bought a Sensi Film screen protector for my magician and when ive put it on the screen it has given the screen a rainbow effect, is this the price you pay to protect your screen or is it not right?
It wasnt cheap (£10) so surely it should be good?

Related

stock screen protector is good enough?

1st sorry for my english. i just wait for my blackstone. and now just want to know
Is stock screen protector that come in the box is good enough?
or we must buy 3rd party?
which brand do you prefer?
Hi iDaemon,
I have the stock screen protector on at the moment and while its ok I will be buying a 3rd party protector.
With the stock protector I get bubbles under it no matter what I do but its ok for the time being as their only on the edge of the screen.
I am waiting on either the invisable shield body protector or the Clear-Coat one.
thanks AFK_Matrix, so maybe high quality protector will good when apply on our device?
iDaemon said:
Is stock screen protector that come in the box is good enough?
Click to expand...
Click to collapse
It is good enough for me. It works just fine.
Brando is the best.
I tried the stock one & found it too thick (although it was as soon as I got the phone, so maybe I wasn't pressing hard enough?) I've now got a Brando's from Inkino which they even fitted for me & I can't tell is there with regards to sensitivity.
I didn't get a screen protector in the box If it stratches i'll use orange care to get me another
The HD screen protector is just fine, and it doesn't always give bubbles. I got one tiny bubble above the vga camera because I slightly misplaced it, too near to the top, otherwise it's perfect.
Don't know about sensitivity, since I have not tested with another protector on the HD yet, but a screen protector would have to be really thick in order to impair sensitivity on a resistive screen, almost impossible for a thin plastic film.
Screen protector
On my Glofiish have been using this protector.
Now I´m waiting for HD protector.
http://www.boxwave.com/products/cleartouch/index.htm
i think the stock one is pretty good, i have some bubble around the vga camera & the earpiece... but thats because i misplaced it, the rest of screen is perfect.
gurluver said:
i think the stock one is pretty good, i have some bubble around the vga camera & the earpiece... but thats because i misplaced it, the rest of screen is perfect.
Click to expand...
Click to collapse
I don't think you misplaced it. It just does not fit well. I have applied the stock one and a different one for like ten times and the stock one always gets bubbles near the earpiece and cam. not with the other one. However, the one I bought is horrible, it distorts image so I will not recommend that one either (so dont buy this one). I am getting a brando, lets see how that goes...
...good enough...whatever it means!
I have bubbles even I have placed the stock protector perfectly...
s***!!
I'm definitely going to get a 3rd party protector.
Through the years I bet I put 50 screen protectors on devices, including replacememts. Not to say I'm more than proficient, but the stock protector went on perfect for me.
nin2thevoid said:
The HD screen protector is just fine, and it doesn't always give bubbles. I got one tiny bubble above the vga camera because I slightly misplaced it, too near to the top, otherwise it's perfect.
Don't know about sensitivity, since I have not tested with another protector on the HD yet, but a screen protector would have to be really thick in order to impair sensitivity on a resistive screen, almost impossible for a thin plastic film.
Click to expand...
Click to collapse
You can adjust the sensitivity by recalibrating the screen after you've put the screen protector on.
These devices seem to use the pressure used during the screen calibration to set the sensitivity. If you use a very light tap with the stylus on each of the 5 points during the calibration, you should find the touch screen is more sensitive (and equally if you press very hard with the stylus, the screen will be less sensitive in future use).
Ben
InvisibleShield de ZAGG
protection InvisibleShield de ZAGG look here videos first Video or here second video
very great protection lol
site produit: http://www.zagg.com/
25% OFF gift cards on Invisibleshield/Zagg
Hi, I just got email from ZAGG, they have 25% off gift cards with coupon code GIFTCARD25
So, what I did ... I bought $25 gift card for $18.75 and will use it for full body protectionfor HTC HD ... which I bet will be $24.95 when available.
bogdatov said:
Hi, I just got email from ZAGG, they have 25% off gift cards with coupon code GIFTCARD25
So, what I did ... I bought $25 gift card for $18.75 and will use it for full body protectionfor HTC HD ... which I bet will be $24.95 when available.
Click to expand...
Click to collapse
From where can I found that protection? I cant find any shields for touch hd from zagg.com
EDIT: My mistake, miss the words "will use"

No Screen Protector

Hi all,
anyone not using a screen protector? how is the hardiness of the glass? is it scratch resistant?
thanks!
i got the phone the 1st day it came out at t mobile and haven't used a screen protector since and i think the screen is pretty good i've only put it in my pocket once though. the screen looks just like when i bought it.
I have went a week without using a screen protector and I am just fed up with the smudges on the screen and I am going to just buy the Invisible shield and hopefully have it by the weekend. They are amazing products.
http://www.zagg.com/invisibleshield/htc-hd2-t-mobile-cases-screen-protectors-covers-skins-shields.php
mcfly015 said:
i got the phone the 1st day it came out at t mobile and haven't used a screen protector since and i think the screen is pretty good i've only put it in my pocket once though. the screen looks just like when i bought it.
Click to expand...
Click to collapse
how long has the phone been with you? so it has no scratches and you dont use a pouch? im using a screen protector but im quite getting fed up with these things.
check this out if you wanna see how durable the screen is ..... I am just getting fed up with the smudges and want something besides a silicone sleeve for grip.
http://www.youtube.com/watch?v=NcEaehKWr2s
the glass screen is durable enough. i don't think you need a screen protector. you will probably break it before you scratch it.
Had the HTC rep come in my store today. He saw i had a screen protector and laughed. He was like you should know better man you dont need a screen protector. He grabbed my store keys and began to grind them on his screen with a fair amount of pressure and not one scratch i was impressed.
xspeed9190 said:
Had the HTC rep come in my store today. He saw i had a screen protector and laughed. He was like you should know better man you dont need a screen protector. He grabbed my store keys and began to grind them on his screen with a fair amount of pressure and not one scratch i was impressed.
Click to expand...
Click to collapse
seriously? yeah i also sent them an email regarding why it has no screen protector, this is my 4th htc and all of them came with a screen protector except this one being their flagship phone and huge screen. they did say it is scratch resistant and no screen protector is included and needed.

[Q] Do you Have Protector Screen in your HD2?

Well i had a screen protector in my hd2 since first day, but i read some and found that it is scratchness, so i took off the screen protector and the difference is big o.o the colors and brightness of the screen are so beautiful compared with screen protector (L)
so can someone confirm me that is it truly anti-scratches? or it is just false?
i have a nice scratch down my screen lol
Demon_man said:
i have a nice scratch down my screen lol
Click to expand...
Click to collapse
So, i did bad taking off my screen protector? lol
renehd2 said:
So, i did bad taking off my screen protector? lol
Click to expand...
Click to collapse
mines from trying to prove you cant scratch it LOL........
It's highly resistant to scratches. I don't have a single scratch, no protector, and have had the phone since they came out in the US.
Of course, being glass, it still possible to scratch if you try hard enough.
i used the pouch that came with it for abotu a month and a half but then i didnt bother, ive had the phone since nov09 and dont have any scratches on the screen
i use no other than "brando ultra clear" since my early days with my palm V
screen protection is highly resistable and after 2 Years of usage with stylus no scratches. On my HD2 no difference with or without screen protector.
Udo
I'd recommend some kind of pouch when you put it somewhere together with other stuffs, especiually keys etc. If its solo in your pocket its safe.
just keep the screen pointing to your leg in case someone hits you with something. <-happened to me
i have my hd2 from nov 2009...i use the leather pouch it came in with...clean as new....but then i take care of it real good....it can get scratched if it comes in contact with a material which has a higher moh (measure of hardness) ...so get the leather pouch for hd2...it wont add bulk to your phone and provides the best cover for the screen
I got the Otterbox for the HD2 and its amazing. When I take the phone out of it to remove the battery or sd card the phone still looks BRAND new. They cost only a little more than some screen protectors do. I got mine on Amazon for around $30
2 years with my dear and not a single scratch, and i don't use the leather pouch, only a silicon case to protect the back.
Hi, screen protector save my phone when i accidentally drop my hd2 from meter and half. Screen clash on sharp stone on ground, protector to destroy, but display survive with only little scratch. So, im using screen protector. Obviously do not use cheap screen protector.

LeEco Pro 3, anyone using it withou ANY screen protector?

The stock screen protector is rubbing off so I replaced it with a new one.
https://www.amazon.com/gp/product/B01N3ZTMLG/ref=od_aui_detailpages00?ie=UTF8&psc=1
Unlike the stock one, this one is the hard glass. (the stock one is a film).
The problem with this screen protector is that it is a grease/finger print magnet. Ususally I can remove the grease/finger print from the screen by rubbing it on my shirt. With this one, it just moves the finger print grease around. No my shirt is not greasy because I tried it on another phone and it didn't smear the grease around. The only way to get a clean screen is if I use a micro fiber clothe with some water. Also I noticed that my screen is not as bright as before with the new screen protector, especially when using it outdoors.
I was thinking about remove the screen protector all together. Since our phone has Corning® Gorilla® Glass 3, it "should" be fine. But before I remove the new screen protector, just wondering if anyone is going bare on the screen and if they have any issues with scratched screen.
Thanks
I haven't had any screen protector on my phone since october. Screen is fine, although I haven't dropped my phone.
I have been using the same screen protector which i bought from aliexpress and i can feel the brightness problem but i am fine with it since this tmp glass removes entirely the ugly black borders from the phone.
I dont know if there is a good color tempered glass which does both.
Just removed the aftermarket screen protector today and going bare. So far it seems fine and resistant to scratches as well. It feels a lot better than the stock screen protector or the aftermarket one. It is a lot brighter and really smooth. Another thing that I noticed is that it is a lot more sensitive to the touch.
Never used any sort of screen protector on my phones. Never a single scratch.
As long as you do not put any other items in a pocket with a phone, it should be fine.
I have tried 3-4 different screen protectors and none of them seem to stick properly. They never want to stick on either (or both) the left and right sides of the screen. idk what the issue is but I've never had that problem on other phones
I'm too afraid to not use any screen protector. The camera lens scratches so easily that I don't trust the glass at all.
Sent from my LEX727 using Tapatalk
The stock screen protector is rubbing off so I replaced it with a new one.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Unlike the stock one, this one is the hard glass. (the stock one is a film).
The problem with this screen protector is that it is a grease/finger print magnet. Ususally I can remove the grease/finger print from the screen by rubbing it on my shirt. With this one, it just moves the finger print grease around. No my shirt is not greasy because I tried it on another phone and it didn't smear the grease around. The only way to get a clean screen is if I use a micro fiber clothe with some water. Also I noticed that my screen is not as bright as before with the new screen protector, especially when using it outdoors.
I was thinking about remove the screen protector all together. Since our phone has Corning® Gorilla® Glass 3, it "should" be fine. But before I remove the new screen protector, just wondering if anyone is going bare on the screen and if they have any issues with scratched screen.
Click to expand...
Click to collapse
I Have the same problem. While the screen protector is ok and protects the phone, it catches fingerprints and the most anoying thing, outside it reflects everything and I can't see very well. I didn't find any matte or anti-glare tempered glass screen for le pro 3. Only iphone and something else. If anyone finds something good post a link please.
motanel_pufos said:
I Have the same problem. While the screen protector is ok and protects the phone, it catches fingerprints and the most anoying thing, outside it reflects everything and I can't see very well. I didn't find any matte or anti-glare tempered glass screen for le pro 3. Only iphone and something else. If anyone finds something good post a link please.
Click to expand...
Click to collapse
It has been a week now since I removed all screen protector and I am happy that I did it. It feels so much better and I can say that the gorilla glass on this is legit. I work in a warehouse and I have my keys and a box cutter in my pockets. I try to keep them away from my phone but when you are moving fast, sometimes the box cutter ends up in the same packet as my phone. So far still no scratch on the screen.
I'm still keeping mine, even if reflects everything because on my old phone covered with full cover, front and back, dropped on a corner of the screen, the screen protector took the fall and broke instead of the actual screen. So better to be cautios.
Mine came with a screen protector (X727), but I ripped it off very quickly. I haven't broken a single smartphone yet.
No screen protector since day one. No case either. Dropped it few times and cosmetic glass around camera cracked. Front screen is pristine, which is surprising since I am not careful with it.
Sent from my LEX727 using Tapatalk
Found these cases on Amazon that provide screen protection. I have used similar cases on other devices and have had good luck in preserving the screen without the use of a screen protector:
kw mobile canvas case
kw mobile cover shell case
Never used any screen protector on my smartphones, since my first Sony Ericson P800 years before the first iPhone were released...
Never broke the screen, had a few small scratches on some of them (not all though), and I usually keep my devices for 3 to 4 years. My previous phone was a Samsung Note 2, the screen is still perfect.
I will not put any screen protector on my Le Pro 3 either...
I was using the stock screen protector which was preinstalled until today. Sand scratched it so I removed it.
Sent from my LEX727 using Tapatalk
Is anyone having issues with corners of your tempered glass protectors not adhering properly? I'm getting white ghosting all around the protector. Replacement ones had the same effect...
RussianBear said:
Is anyone having issues with corners of your tempered glass protectors not adhering properly? I'm getting white ghosting all around the protector. Replacement ones had the same effect...
Click to expand...
Click to collapse
Same problem for me.I think its because of the curve of the screen
I got the full coverage one from aliex, no problems with adhesion, but it's an awfull magnet for smudges and fingerprints, and dulls the colors of the screen, gonna run it a few days just for kicks, but I'll remove it for sure.
And oh, havent had a screen protector, not since day one, and no problems, not a scratch on my phone (I do take care of my gadgets though)
Valinos said:
Same problem for me.I think its because of the curve of the screen
Click to expand...
Click to collapse
mine doesn't even cover the screen fully...baffled by this, honestly.
I removed screen protector today. Got sick of dust and other sht all around due to corners of glass not adhering properly. The phone looks much better, so far so good.
Just in case try to avoid keeping it with keys etc. Also check this .

Issues with the screen protector

I've been having this phone for a month and a half. I bought a screen protector with it and when I had set the screen protector I noticed that a ring forms around the screen protector as if it wasn't glued properly. After trying to set it properly for quite some time I just set it off and threw it to the garbage.
Afer some time I decided to try again with a different one, today it arrived and I have the very same issue as with the first one. I'm not sure if it is because the screen protectors are not very high quality or if this ring forms in all screens but since my device is black it is more noticeable than in white colours.
I hope you guys can tell me if this same issue happens to you or else it is my fault or the screen protectors that I bought.
I've had the same issue also. Like you...I took it off and tossed it I the garbage. I then tried the ones that are a bit short at the edges. All those ones did was attract dust and lint along the edges.. I tried another one with the black borders...that went in the trash too. I'm using my A1 with no screen protector, but I am using a case.
This is the problem with the curved screens at the edges. It's hard to manufacture curved perfect protectors that are hard. You may have to try the softer protectors. There's too much variance in the curves from manufacturing to be able to guarantee a proper fit.
You can have a look with my Nillkin screen protector review.
https://forum.xda-developers.com/mi-a1/accessories/nillkin-mi-a1-accessories-small-review-t3696018

Categories

Resources