Related
Guys, I hope you can help me!
I was using my Imate Jasjar when it was accidentally bumped by another person. the Jasjar fell but it wasn't that high and the floor was carpetted. However, I noticed that whenever i try to tap on the Start button on landscape mode, the calendar application opens up! And when I try to tap V-Bar on the other corner opposite the Start button, the Contacts application opens up. Basically, the soft keys on the bottom screen are the one opening up even if I'm tapping the ones on top! If I tap the bottom soft keys, I thought the Start button or my V-bar would come out but still the Calendar and Contacts applications were the ones that opened. Basically the everything on top cannot be tapped!
On Portrait mode, I can tap the start button but when the V-Bar was tapped it still opens the Contacts application.
I went to Settings then Screen to re-align the screen. I thought it would solve the problem but apparently it didn't! I was trapped in the Align Screen section giving me an endless loop to tap the 5 areas of the screen.
I now did a Hard Reset, and now I'm forever got stucked to the Align Screen part.
What am I supposed to do??? Please help!!!
Hi,
Seen the same problem... Try to guess the error margin of the alignment...
for example instead of tapping in the center of the cross try tapping on left or right... Since your screen isn't aligned you can't press on the center...
Now the problem is hardware, not the MB but the LCD...
After tou figure out the margin error, the Universal will resume and then you ca align the screen via Start->Settings->System, align screen
I'll try to know more about this problem asking my friend.
Best of luck
thanks for your reply!
i also believe that it has something to do with the LCD. there are no cracks whatsoever. problem with the aligning is i have to keep on guessing. and if ever i do align the screen successfully, i'm not sure if re-aligning the screen in Settings would solve the problem.
i would appreciate though if your friend or anybody else can shed light to a solution.
This is a simple problem to solve ;-)
When the allign screen is ON and you have to make the first tap on the crosshair (just before you start clicking away to allign your screen), twist your display from landscape to portrait mode...
Now continue to allign it as usual, and you should finish successfully!
Cheers,
San
unfortunately, after following your instructions, i still went on an endless loop on aligning the screen. i'll try to reflash the rom and see if it would work. i hope it does...
i updated my ROM. still stuck on the alignment screen!
any more ideas?
To be honest, sounds like your screen is broke. Even if you got it to align, I doubt it would be very usable. I think you are looking at repair - if there's no visible sign of damage, you might get away with a warranty repair.
Cheers,
Steve.
Hi
Few months back i've got exactly the same problems (odd LCD behavior, impossible alignment, etc...) with an HP4700. I went to the service center and they had to replace the LCD screen. They did not charge me and take it under warranty. In my case the unit did not drop and i made it clear to them. I would suggest you go back to the service center and forget about the drop in your problem description .
Cheers,
Bruno
I had the same thing happen on a HP 3700, I did not even drop it all i did was install the Quake game for it and after a few days the screen alignment went a bit out. It was usable but definately out by about 1 cm in each direction. The unit had not been dropped. I went into the allign screen utillity and ended up in the infinite loop. The only way to fix was a new screen. But unforunately it was no longer under warranty. The screen consists of 2 separate parts the lcd and the touch screen bit. In my case the lcd had no issues just the touch screen. Very annoying but there you go.
Search your soul and do what you feel comfortable with.
Good luck
Charlie
thanks for all your replies!
i've made several searches yesterday with similar problems (even if they're using different PPC models) and they all ended up sending back their units for repair. there's even one who posted in expansys with the same exact problem!
we'll be sending it back through expansys (we got the unit from them) and hopefully get it back before the end of the month. and yes, i won't tell them that it was dropped, he he :twisted: and they won't find evidence either on the outside because there are no physical damages. what a start of the new year for me <sigh>
right now i'm back using my XDA IIi.
thanks for all your support! this is my first thread/topic in this site and it's so unfortunate that it had to be sort of a negative one. looking forward to be active more here!
Hello there
This might help (I am currently wrking with 200 PDAs so have had this a few times)
THere may be a iece of dust/biscuit crumb etc, under the edge of the casing above the screen, try using a post it note or paper and go around the casing/edge of screen, this should clear the screen of anything that may be causing this problem.
THis worked for me on the majority of non-aligning screens
HTH
DB
My story was, one day when I needed to twist the screen, it was a bit stuck so I twisted a bit harder, yes it went back. Then few days later, the mis-alignment started and since then I have been keeping to do re-alignment my screen.
My screen is mis-aligned once every 2 or 3 days or even few minutes then I have to re-align by using WM5's alignment program. It sometimes takes me 2 or 3 times or even one time.
The most anoying thing is it keeps forget after aligned screen.
Now, certainty, I don't think it is a screen problem because after running alignment app, it correctly pointed into the right spot but then it forgot where the right position was.
I have done the upgraded ROM ( even tried Ivan AKU 3.2 ROM ) but problem still persisted.
I just tried clean up the edge of screen, finger cross, hope it fixes my problem.
Bad thing is, I bought my device from UK and I am living in Australia so therefore, my warranty is definately invalid. I don't want to spend 200 AUD for the new screen ( unless I am 100% sure that LCD is faulty ).
Anyone has any idea or even a better suggestion because I don't see many people having this problem.
I suspects that maybe the flex cable got ripped but not totally ripped. Don't know , please help me out on this one
Best regards
Anyone has any idea about my problem ??
One question :
I know that the flex cable has 2 connectors ( one is for LCD display and another is for LCD function ). Now does LCD function relate to the touch screen function ? and if one tiny wire of the function cable got cracked, but not totally cracked, will it affect the touch screen function ?
Other thing, does WM5 store any setting relating to screen alignment setting ? If yes, where is it ?
Thanks
Hi, from another forum, it only help to bypass the alignement loop:
"here you go theses are simple steps to bypass the touchscreen alignment.
Install you activesyn blah blah blah when it finds it go on my computer and go into your PDA device
go to windows startup and delete the Welcome file
after that give your PPC a soft reset and BAM u by passed the screen now get a free desktop program liek pocket controller from the internet it will automatically install on your pda and BAM you can control your pda add music and whatever
but now if you want to click stuff on the road get pen irazu just search on google and send it to your PDA then go to file explorer and double click it and you got a cute little mouse program that you can use like a stylus"
also try this little soft:
http://www.codefactory.es/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Hope it helps.
MaX
Hi godtakeit!
I've had the same problem a few weeks ago (and still having it from time to time) and for me a slight (very careful) bending of the screen makes it work again. It seems to me that there are connector behind or near the display which has some loose contacts.
Did you notice any other problems which came in conjuction with the alignment problem (e.g. speaker not working)?
.ox
Hi oxident
No, I don't have problem with speaker ( it was not working before but it is because of the jack plug problem - it solved ). Yeah, I did notice if I bend the screen carefully, the problem is gone. The funny thing is when I aligned the screen, it worked but if I closed it off and left it over night, it started again when I opened the lid.
You may right about the connector between LCD screen and mainboard. Well, I have no choice but openning the device and check it up.
Also, I read the thread somewhere in this forum and somebody advised this problem maybe relates to magnet around device. My brother aslo advised me that LCD charged and reserved negative electrons. Wierd but I am experiment it at the moment ( taking off battery and leave the device for a few days so that it can release the negative electrons ).
Hope it fixes
please help
i have an imate jas jam that i i got from my father he used it for like 3 years and it is pretty banged up so i cant use the warranty and repairs cost a lot, any who i got it yesterday and it was very slow so i reset the settings and now im stuck on the align screen it keeps going on for ever and ever if any one knows any thing plzzzz help
Welcome aboard
You have one of the best HTC devices ever made!
Have a look here to locate the solution to your prob:
http://forum.xda-developers.com/showthread.php?t=549207
Post number 2
Good luck,
i got a new exec 3 days ago after my first one packed up and have noticed that the new exec is different, it feels lighter, the battery seems to last longer and there are more grooves and holes. under the screen there are 2 holes to stop the screen from spinning to far. Does anyone else have these or am i the only one the have a new design exec?
i also noticed a hole under the sim card that wasnt there before, does anyone know what its for? its on the left of the red clip that holds the battery and on the left of the clip that holds the back case on
sry for the bad quality
daven said:
i got a new exec 3 days ago after my first one packed up and have noticed that the new exec is different, it feels lighter, the battery seems to last longer and there are more grooves and holes. under the screen there are 2 holes to stop the screen from spinning to far. Does anyone else have these or am i the only one the have a new design exec?
Click to expand...
Click to collapse
lol i thought it was just mine.
i got mine about a week ago (old one got a crack screen, thank you insurance! ) anyhow the screen rotation is alot tighter and more of a robust feel to it. I also seem to have more program memory after a soft reset (possibly the new ROM update) either way i think my screen breaking (broke by itself might i add) has turned out to be for the better. 8)
oh and I'm sure the spring metal clip thingy under the back case (your second pic) wasn't there before.
the case comes off so much easier/quicker than before! (not that it needs to come too often lol)
Thanks for the reply.
Im glad im not the only one, but these changes are definately for the better.
Keyboard backlight
I have also just received a new Exec and I note:
* O2's UI crap doesn't run by default and I was able to easily remove it.
* There is no obvious keybaord backlight. Has it been removed?
* The backlight switch on the front edge doesn't do anything. Have I missed something?
* Before I removed the O2 software, there was a Task Manager application. Now that I have removed the O2 stuff, it has disappeared. Is it part of the O2 suite?
* I have installed GPRS Monitor from the CD. It seems to record traffic via Wi-Fi as well GPRS. Can anyone confirm this?
Blair[/list]
The keyboard backlight uses a light sensor so it only comes on when its dark, you can disable the sensor if you go into start>settings>buttons>backlight and un-tick 'enable keyboard backlight auto sensor.
As for the backlight button, mine never worked, not on the new one or the old one unless i installed a hack to enable it.
I dont know about the gprs monitor as i dont use it.
About the task manager, i dont know about that either as i use spb pocket plus.
Hope this helps
Thanks
Thanks for the information.
the new redesigned exec
Guys, Now you have owned these redesigned execs for a while , how are they holding up? do they still suffer from wearing shing spots on the housing and keyboard? or are there new problems now...lol??
everything seems to be ok, i use a silicone case so i dont know if the spots still happen. Although the screen seems to be tighter, its not as loose as my old one which became very loose after the first few months. Other than that everything seems to be perfect
New Execs
After checking with my son who has an Exec for many months, I conclude that there have been no noticeable changes. Everything I though was odd about mine such as:
non-working camera
no keyboard backlight
backlight button not working
turn out to be respectively:
firmware problems (reloaded ROM & the camera worked fine)
it really needs to be very dark before the keyboard backlight comes on - which it does
the backlight button doesn't work on older Execs either[/list]
Hmm, I must have an in-between model. The hole and the clip are present, but not the bits under the screen.
And I thought I was the only one getting shiny spots on the casing. Can they be removed?
Hello from down-under ,
I've come to put forward a problem myself and a few others are having over at the Mtekk forums. I currently just purchased an I-Mate JasJam on Telstras' new NextG network and have been using it for about a week and a half. As this fantastic piece of equipment is a little on the expensive side, I wanted to make sure it was kept safe all the time, so I began to use (no matter how silly it made me look ) the I-Mate supplied Pouch, little did I know it did more damage then not using it...
After investigating over the last few days, It was concluded that the magnetic found in the supplied Pouch had some diverse effect on the switching on Landscape to Portrait mode when removing the JasJam from the Pouch to answer/make a call, play a game or send a text message; often resulting in a 'bugged' or 'glitched' screen, stuck between either Landscape or Portrait etc (I fixed by removing the JasJam and sliding out the Keyboard and back in).
After I few days I thought that this couldn't be right for a brand new machine and took my problem to the Internet in which I found others with the same problem. Since then I have stopped using the supplied Pouch and am now looking at purchasing the Krussel Orbit Pouch as a magnetic-less replacement (any users with one, I'd love your feedback). I am making this thread to see if any users of the XDA-Developers board have faced this issue and ask one further question:
1. Since I stopped using the Pouch I can only find one annoying trait left, whenever I switch the Screen back on from 'Standby' mode I seem to receive a small 'glitch' in the Today Screen if the device has been locked, if the device has been left unlocked the Screen can be switched on/off with no issue - does anyone else have this problem, I'm concerned that the magnetic pouch has caused some internal damage...
Thanks,
Elite_Gamer04
Hi, there is a bit more about this problem in the accessories thread, I noticed the magnet causing issues and wondered about internal damage as you did, even possibly causing the align issues, but a few people reported back they had been using the case from day 1 and while it affected the landscape/portrait, they had no align issues or any other problems, so I don't suspect that there is any internal damage occurring..I do wonder about your screen glitch but without actually seein it..I haven't a clue, also do you have a lot of today plugins?..could possibly be one of them is buggy..I'm not sure, but the case does certainly suck, I was immediately concerned with the magnet strength, off topic..but on my device if my thumb is a bit damp or any metal touches the aluminum bezel around the ear piece of the phone..the screen will flicker.
Thanks for your reply Chaotic, My device is in the same state as when it come out of the box, so this isn't a 3rd party issue. I have tried removing/adding the default Today Screen icons to see if it makes an issue to the 'glitching' of my screen when it on/off and it makes no difference, only thing I can see that makes it not happen *sometimes* is when the device is not locked.
Well thats one user without my issue, hoping someone will report it, or I'm going to get a replacement.
*If your testing to see if you have the same issue as me, simply hold your device in your hand (try both with it Locked and Unlocked) and push the top right-hand side button which should switch your screen off, press it again for it to come on. If you see a sort of 'glitch' of white on your Today Screen and then it fixes itself (I'm talkin 1-2 seconds) you have the same as me.*
Hi chaps,
I've used the magnetic pouch from day one with my UK T-Mobile Vario II and am still yet to see the landscape/portrait switching issue when removing the Vario II to answer a call.
I had a theory about this, and it's probably going to get shot down in flames for it's obviousness, but I'll mention it anyway... Could the problem be down to the machine being powered down (manually or automatically) while in Landscape mode... then when switching on automatically when a phone call is received, the phone tries to switch back to portrait mode but gets stuck?
I have road tested this theory on my own Vario II and have not seen the problem at all, but my ROM may handle things differently to yours? Apologies again if this suggestion is obvious.
elite_gamer04 said:
Thanks for your reply Chaotic, My device is in the same state as when it come out of the box, so this isn't a 3rd party issue. I have tried removing/adding the default Today Screen icons to see if it makes an issue to the 'glitching' of my screen when it on/off and it makes no difference, only thing I can see that makes it not happen *sometimes* is when the device is not locked.
Well thats one user without my issue, hoping someone will report it, or I'm going to get a replacement.
*If your testing to see if you have the same issue as me, simply hold your device in your hand (try both with it Locked and Unlocked) and push the top right-hand side button which should switch your screen off, press it again for it to come on. If you see a sort of 'glitch' of white on your Today Screen and then it fixes itself (I'm talkin 1-2 seconds) you have the same as me.*
Click to expand...
Click to collapse
I assume you are referring to the lock/unlock option found on the Today screen? I also see a short white screen delay when using this Today screen option.
I also see an even longer delay when using the password/pin lock option. Probably something to do with the locking program checking to see if the preset time delay for locking and requesting the password/pin has passed.
Disabling both options makes starting up a lot faster, although you may of course need these options enabled. I'm sure it's something that will be resolved by the manufacturer in time.
elite_gamer04, I hadn't ever used the lock on my device, so I enabled it just to test, and there wasn't any differences, I also wasn't sure of what the actual glitch was, but since you mentioned it I did some further investigating, I do notice a white screen when coming back from standby, but it lasts no longer than half a second..definitely not 2 seconds.
g00nerz, its all good, all info around here is appreciated, but there is definitely an issue with the case magnet, I don't have a single landscape/portrait issue unless I put it in the bundle case..I use a modded aluminum case at the moment..but if I switch back it happens, I'm pretty sure the words "bundle case" are in the title of the post with others with this issue if you want to check it out.
I have read where some people were discussing that they thought some had different screens..that could be why you haven't had this issue or maybe it is ROM related, but from what I understand its been a variety of brands with this issue...now that I think about it..I wonder if all the brands bundle cases are the same?
I think its Mike(I hope I got that right) that has tore one of these apart..few posts about it with pics on the forum he might know, but anyhow I wonder if theres actually a hardware switch that triggers the switch from portrait/landscape when the slide out kb is opened, and the magnet is affecting that..could also be it was revised on some models.
I'm just speculating/guessin on what might be causing it, I really haven't any solid info other than some people definitely have an issue with the case, including me.
I also see a short white screen delay when using this Today screen option
Click to expand...
Click to collapse
I <3 you hehe. Thank god its not just me . Yes I was referring to the 'Device Lock' and 'Device Unlock' function on the Today Screen. When it is Unlocked and I switch on/off the screen I see no 'lag' or 'white glitch' but with it on I see a small 1-2 sec lag. Anyways as you have confirmed it also I don't have to worry about returning mine and will get on with my new Krussel case I'm about to order.
Thanks
P.S If others are having this issue, or know of how to fix, don't hesitate to post.
Please consider that the use of wifi may drasticely slow down the device's power up. I do use the default case with the strong magnet, and when I power up my device with the wifi enabled it takes a while until he completely awake; the wifi plus the switch landscape => portrait (thanks HTC case) slow it down.
I am also experiencing the "auto answer" issue; from time to time when I put my device off its case it answer to the incoming phone call, but till now I was not sure that the case could be involved; are you sure about this? I tried to give some testing but I was not able to reproduce it; it only happen when it is not expected to happen
elite_gamer04 said:
Hello from down-under ,
As this fantastic piece of equipment ......the I-Mate supplied Pouch, little did I know it did more damage then not using it.........I switch the Screen back on from 'Standby' mode I seem to receive a small 'glitch' in the Today Screen if the device has been locked, ....
Click to expand...
Click to collapse
Hi elite_gamer04, As you had rightly mentioned this is really a fantastic device and no doubt about it.....like you I had the same problem when I bought it around 2 months back.
I was breaking my head as to why its happening, it looked for me as if the device hangs on and off...but did not notice keenly the instances when it happened as removing it out of the pouch was too normal a thing that did not hint me that it has something to do with the issue...But I was totally broken and disturbed and decided somehow I am going to get a replacement. I took it to the service centre and the guy there (very smart) as soon as I mentioned about the problem ( I went there thinking that it has something to do with the sliding mechanism) responded spontaneously taking the pouch opened the flap and took the magnet side over the screen and showed it to me....wow yes...its the pouch which was the culprit as we noticed the screen going crazy....Anyway I was relaxed but from that instance I kept aside the pouch that came with the pack and I am currently using a different one from the stores. Till now I have noticed no glitches and am happy I own a real amazing fast device.
About the other glitch you mentioned when the phone is locked yes I tried and it is there even for me but I dont think its a major issue for you to replace the device as its something to do with the screen refresh rate and memory which am sure would be fixed by new ROM upgrades in the days to come...but relax rest assured you own a fantastic device.
All the best
Thanks for posting this about the screen - I thought I was going nuts. I bought a replacement pouch that has a belt loop - so slightly more secure than the clip. But when i started using it - it always switches to landscape mode.
I'll have to find one without a magnet i guess!
I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs! I'll soft-reset and sometimes it wont boot up, it just hangs at the windows logo screen. I upgraded the ROM to the newest from Cingular thinking it was some program that was doing it, but it comes back.
When it's in portrait mode, it's the upper right hand corner. When it's in landscape, it clicks the start button(upper left) so I dont think its a program thats making it click, but something physical touching that certain spot. Anyone have any idea?! I thought something was stuck in there but it's clean.. this is so annoying, I cant even make a call since it clicks exit when it comes up! It stops SOMETIMES for a few minutes but then it comes back after a while.. anyone else?
Give it a yung choo kung foo whack, take a run-up.
...
Sounds knackered, you could try the screen alignment fix, pressure from the gasket may be causing this:
http://wiki.xda-developers.com/index.php?pagename=How to fix the Screen Aligment issue
Your best bet is to send it back for repair though .
I bought it off ebay.. so no warranty
It's weird because I take a very slim credit card( 1/2 the thickness as regular cards) and slide it in and bring up the plastic around the screen and it STILL does it!! nothing is touching the screen at all. Also, my alignment is still spot on perfect.. what gives?
Oh yeah, I did smack it a few times and it works sometimes.. It's been okay right now for about an hour but I know it's going to be short lived..
Did you try loosening the screws?
MilanoRex said:
I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs!
Click to expand...
Click to collapse
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel
tadzio said:
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel
Click to expand...
Click to collapse
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.
Your case is putting pressure on that part of your screen. It is not device specific. Slip a piece of paper under the case to check for clearance. I use under the case screen protectors and have seen this before. You may be able to simple pry the case and create some clearance.
I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated
MilanoRex said:
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.
Click to expand...
Click to collapse
The iPhone? You're going to actually exchange this beautiful piece of full-fledged mini-computer &phone in one goodness for an iPhone? Note: This was not meant to flame anything or anybody. If you feel that I have, I deeply apologise.
jotham said:
I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated
Click to expand...
Click to collapse
I've inserted a small piece of plastic between the frame and the screen (one month ago).
Here you will find a resume of proposed working solutions
http://forum.xda-developers.com/showpost.php?p=1056346&postcount=227
Can you tell us the serial of your Hermes? (HTC62xxxxx, 63, 64)
That is the same problem I had with my 8525. I tried ALL the solutions here in the forum but nothing solved it. I finally returned it to Cingular and they gave me a brand new one with zero hassle. Two weeks in on the new one, and it's working like a champ (knock on wood).
the S/N is HT657xxxx
Nothing is putting pressure on the screen, I've pried some clearence between that part of the screen and it still does it. I dont even have a Cingular account, so I doubt they'd help me
My only other option is to take it apart(following the japanese website instructions) and see what's going on.. Maybe something underneath the screen is doing it? I dont know..
Oh yeah, not only did i loosen the screws behind the screen but I completely removed them and it STILL does it. I found the registry setting for screen sensitivity and lowered it from 7,xxxx to 5,xxx and it did nothing..
Good evening... Well recently, i bought a Screen Protector from ShieldZone for my hermes. Well I applied it to the screen and so forth to the rest of my device, then i realized the touch screen doesnt work. I take out the battery for a few minutes, and it starts to work, but after a few seconds, it stops working again. Any suggestions?
This happened when i put my first screen protector on too.. What happened is you put the sticker on to tight; there is an equal pressure over the entire screen , so the processor cannot distinguish your pen touch from the rest of the matrix. All you have to do is take the protector off and reapply it with less force and it should work. (It took a few tries on mine to get it right, did the same thing on my wife's Treo 750.)
well,sounds strange,did you align the screen properly??
Im using a not so costly screen-protector on my hermes without a problem.
Probably u may remove the shieldscreen and make sure dat its not a hardware issue,good luck
yeah i took off the screen protector and still i have the same problem. Anyway i can change the pressure settings?
well,Im not sure about pressure settings but you may try re-aligning the screen (in settings) ,it shud help mostly,hope u have warranty which is not void...
I had the phone unlocked, and I put in the latest Cingular OS, even though i am on the TMOBILE Service.
I have the wierdest thing happen this morning!!! I woke up and turned on my phone, and there is a little smudge in the center of it. Almost like there was a air pocket between the protector and the screen, so i took the protector off, and it was still there!!!!!!!!!!!! So, i pressed down on the little spot and it moves around just like an air bubble would. I turned on my phone to see fi there would be any problems and for some ODD reason, everytime i tap the screen it smushes in that spot. It looks like when you press on the lcd screen of your computer and the pixles kinda move around a little!
Was wondering, I have a Cingular 8525 and would this warrant a repair? Meaning, Could I call them up and tell them what happned and they would send me a replacement?
This is really getting frustrating... I had this phone for only 8 days and its already giving me a headache.