Hello ! Good morning everybody !! I have tried to make a firmware upgrade to my ETEN P700, but I've loaded only the first part of the software PKHer_217.nbo. Then the phone told me " everything ok , so I switched it off, but now the phone doesn't work anymore. I got only a blank screen or neither that. Could anyone help me ? I'm practical in electronic, so I can make many things, such bridges, new cables, external supply and so on . Please HELLLPPPP !!!!!!
Related
Hi all.
Need some help really bad. Tried to upgrade my magician (s100) to ROM 1.11.133WWE from qtek.se.
Did exactly as it said I had to but as soon as I started the upgrading my magician went all dead and black and the install shield wizard went down. The only thing left on the computer screen is a box that says: "checking the information on your device... please wait...
Please dont disconnect your device from your PC until the update is completed".
So what do I do?!?!
Am desperate to get my device working again!
Please please help me!
I'm really sorry to here this ... anyway..
As far as I know.. u have my to disconnect ur PPC from the USB cable, then restart PC, u should continue to upgrade after u PC restarts..
u may also try to change the port of the USB cable as well...
this may work on Win XP, I don't know anything about other OS..
I'm not sure about this since I did not face this problem b4..but this solution was reported in another forum ( and maybe here )
I hope this will help...and maybe someone else could give u more INFO...
cheers
Alive!
Got it working!
Did a couple of reboots and that made the trick...
Now, my only problem is that I cant seem to restore my backup-files
Does anyone know where I can download the free program o2plus that I had earlier? Can´t find it anywhere. Loved that thing...
Thanx!
I believe it is better if u do a new fresh installation of everything instead of making a restoration
many users reported problems when restoring after an upgrade...
mostly, ur device will become very slow ....
Hi all,
please help someone if you can.
Have Regular UK MDA PRO.
Tried to do the UNI_Qtek_WWE_11364_151_10300_Ship ROM Upgrade
But got stuck at the country code part.
Now my Pro is stuck on the T-Mobile Splash Screen - the one listing the Model Versions -
R. 1.00.02
G 42.33.P8
D 1.12.42 WWE
It will not progress past this point.
I found out I can access the boot loader screen by resetting with the power light as well but I don't know what of the 3 options I get can help me . . I get these options:
Boot Options:
Enable KITL
Clean Registry Hive
Format Storage
Should I activate some of these? please help - if my Mrs finds out I screwed my new fone I am Dead!
Cheers & please help!
Mummy!!!!!
lr :!:
Trying to keep calm here with my blank screen but can someone help?
many thanks!
lr
I wish I could help (I was at the same ssituation once), but I have a JasJar and your bootloader seems to be different than mine.
But try posting for help on the Universal Upgrades forum. That's where all kinds of rom updates are discussed.
I will mate - thanks for ya help.
I am still stuck and none the wiser for all my research . . . I can get to Bootloader but get stuck therer- whitescreening on clicking the thumbpad button.
is it possible to get some files onto an SD and get bootloader to pick them up from there.
please please help I am desperate over here.
cheers
Great.
I am stuck with a brick.
£350 down the crapper
You could send it to THC Europe at http://www.htceurope.com/ they may charge a small amount to reflash your device
Edit: I think they will cover you if you have a MDA Pro, just try to enter the IMEI at http://www.htceurope.com/Wizard.aspx
Jah, thx mate if it comes to it I will use the link . . .
little rock!
Are you still within your first 28 days of purchase? If so then just take it back to the shop and exchange it for free!
no think i am outside of that now - but i will ring em up and ssee what they offer . . .
it's crap without a fone / pda u know
cheers meat.
Guys and gals I need some help here .
I was upgrading my Xda11i with pugs latest when my laptop timed out and powered down .
I re started the laptop and re ran MaUpgradeNoid.exe but it wont pick up and run through , the first screen where it looks for info on the device says it cant find any and the bottom section says that it is up grading with , and it leaves that section blank as well. The next screen says that it is not designing the device etc.
What on earth do I do now !!!?
Ive re booted the PDA and got to the screen that says USB at the top and
v1.01 at the bottom .
what next ? have I killed the machine ?? hope not as I love it and use it extensively for work .
Astro1
Sorted it
Its ok Guys Ive got round the problem.
By removing the battery waiting 10 secs then re fit , followed by cold re boot ( on off and the button at the same time ) .
When I re started the PDA it came back to the serial then Usb mode as before , BUT the laptop recognised it ann update ran .
PHEW
Thought I was a gonner .
Now running Pugs update but still with the o2 stuff , Not sure if there is an advantage of not having the o2 stuff ? is the phone now unlocked ?? or is that a whole new story ?
Astro1
You are really lucky. I prefer have a UPS...
My name is carlos and im new in the forum.
This is my problem. I have an HTC Imagio. I tryied to update it but i fail because my phone wont turn on again. I dont know what can i do because I new in the htc world and I dont know how can I start.
Please heeeeeeelpppppp meeeeeeeeeeeeeeee
when yoy say "fail" what exactly happen....???
The phone wont turn on again T_T
You're not giving a very good explanation, did you attempt boot loader mode? anything else? at the present moment, you're just taking up thread space..
The boot loader mode is the hard reset??? or what is it?? The phone doenst enter on the hard reset (color screen with 3 options)
Moved as this is not ROM Development
Sorry about that, anyone know how i can fix it????
Hi i have a imagio dead. No bootloader load (someone wrote a blackstone hspl) and broke it .. the only thing when i connect on usb it is found as a qualcomm msm smthing. no drivers for this.. looked all over, xda, google. i found some jtag methods... I wrote a Intelpxa for a rw6815 with jmmflaser... but befor trying a jtag method, and/or try to sell it for components, i want to give it another try. Does enyone know how at least connect to mtty(to write wia usb the bl), or write a bl (any) wia usb?
Imagio Bricked
No USB way...
Unbrick a phone just can be made with JTAG tools... See jtagbox.com/riff-jtag-box-owners-unbrick-your-phone/shops-unbrick-bricked-phone-riff-box-owners-list
Hello everyone ... this is my first post on the forum I'm a reprimand in my assistance, a residue in Brazil and a customer trou Imagio HTC unlock the verizon and I just noticed that no longer seems to me he is the one CDMA XV6975 which blotted out and not turned over, but do not have IMEI MEID DEC and HEX as well ... riff bought a box to try and repair it could make you turn it on, no longer leaves the HTC logo and is vibrating, already tried the hard reset recovery mode and nothing continues to vibrate, not boot tried one more rom's not leave 0%. Can anyone help me with this device, because the customer does not come out of my foot.
Thanks to all.
Htc imagio bricked
hello guys, i really need help from u. i bricked my imagio this evening and right now it wont turn on so i don't know if u guys can hlp me with any software to recover it.
I will be very happy to c my imagio is breathing.
thanks for your help may God bless you all.
Hi!
First ...THANKS @AdamOutler
Trying several ICS Customs Roms , after installing one of the ROM,the device no longer wanted to open !!!
( Before this operation.....flashing more roms ... I left without support usb funtion- very rarely or never connect on USB cable)
Tring to repair into aut. center ....no succes..they said they found traces of oxidation phone - because water.... ???
Ok ! but...can not pay for a repair more than we gave new phone ...isn't true ?
After that after few days tring to connect USB cable on Windows 7....I saw : update driver - Samsung SEC S5PC110 TEST B/D - unrecognized driver ...and windows did not want to install it ! OK ...was the first good sign after almost a week of downtime ....
Knowing the AdamOuter's tutorial....I only tried to revive him ..but each time unsuccessfully !!??
After almost a week since the phone was opened and no battery - today I try again the UnBrickable Resurrector method....and without touching it only after a few seconds....Big surprise !!!, resurrector work and was able to reinstall ( with fastboot - cmd) bootloader.img, boot.img and recovery.img
After that , into recovery I chose to reinstall the initial version 2.3.3 ( luckily mine was on the sdcard ) ...everything went magnificent ! ...but only up here .
tring to reboot devices ....device boot ....but again surprise...and not well .
Now the screen is dark yellow shadows....I do not think anything can be done to repair this defect....and USB connection problem remained the same ( USB not connected !)
( The shadows are now everywhere, the keyboard, the wallpapers on the menu, the bootloader but not in original recovery menu !)
In my opinion I think it might be graphics card fault but may be any....and why USB cable now does not want to connect ....and into ubunto with UnBrickable Resurrector it was able to connect ? ..very very strange !
I have all the driver installed into win 7 even samsung for Odin....trying all methods of connecting ( with USB debugging - on - off) - ....charging only works !
...wait your advice and opinions ! Thanks in advanced ...
Cheers,
surdu_petru
Hi!
Nobody can tell me if it is possible to damage the screen or video card after a ICS custom rom installation ?
If it not possible then I think that those in rep. service changed my screen, because I refused to pay reparation. ( before repair ,I was informed that I have to pay for this , but I refused and they sent me the phone back in a few days without repaired....) .
Now I have it queries....maybe the screen it was bricked after last custom flash ...or those in the service changed my screen - thinking that I will not fix it.
If anyone is willing to try this custom ??? to see about what happens afterwards ...then I'll post this custom rom...but attention you'll brick your device and only solution is AdamsOutler tools ...
surdu_petru said:
Nobody can tell me if it is possible to damage the screen or video card after a ICS custom rom installation ?
If it not possible then I think that those in rep. service changed my screen, because I refused to pay reparation. ( before repair ,I was informed that I have to pay for this , but I refused and they sent me the phone back in a few days without repaired....) .
Now I have it queries....maybe the screen it was bricked after last custom flash ...or those in the service changed my screen - thinking that I will not fix it.
If anyone is willing to try this custom ??? to see about what happens afterwards ...then I'll post this custom rom...but attention you'll brick your device and only solution is AdamsOutler tools ...
Click to expand...
Click to collapse
Lol. Great that your device is working
But, don't let others do it.
Btw you're saying your screen is fixed now?
Sent from my Nexus S using Tapatalk
shockem said:
Lol. Great that your device is working
But, don't let others do it.
Btw you're saying your screen is fixed now?
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Hi!
Sorry but I do not understand your question....by the way - now my phone work great , you are right, everything work well without USB connections, and those spots dark yellow !!! ( at least white looks like dark yellow ).
I believe that the screen is not broken, because running Voodoo Screen Test , all colors are impeccable, no shadow , no colors mixed ....
If anyone knows a more complete test program, something to color or graphics...to see exactly what is defective ? ( or maybe a solution to remove this defect ?) - I will be grateful ! Thanks in advanced ....
Cheers,
surdu_petru