Getting rid of TMobile ROM - MDA, XDA, 1010 Software Upgrading

I had the XDA special edition ROM on my XDA-I. for some stupid reason i downloaded the TMobile WM2003 ROM from ROMKitchen and ugraded it but i hate it n m trying to get rid of it. Now i have seen in the posts that TMobile ROMs have a problem where they do not let u change the ROMs again using the Program A methods so i m tryin to use the SDCard method, i dont see the screen that allows me to do that when i have the SD card with the image in the slot. Presumably i m doing something wrong while creating the image. I m doing it using XDATools OSImageTool, i have another ROM image NB1 file from ROMKitchen as welll i select that as the source, i select the XDA SD Card slot as the destination and copy over the image. but when i reset with the power button pressed i get the Wallaby color screen and not the flashing screen that i m supposed to see.. Can somebody tell me what i m doing wrong?
thanx

Looks like the rom didn't get wriiten correct on the SD-Card, or you have the wron bootloader version on your device.
Try writing the ROM-Image via an external SD-Writer.
You can also try backing up old ROM to your SD via Bootloader and then look if you're able to reinstall it on your device....
Stefan

stefan thanx for your reply. The bootloader version that shows up when i do a restart with power switch pressed is V5.14, Is that the correct version? Is there anyway to check or insure if the image has been written correctly on the SD card?
I do not have access to an external SD card writer so that option is out the window.
You can also try backing up old ROM to your SD via Bootloader and then look if you're able to reinstall it on your device....
Click to expand...
Click to collapse
The old ROM i presume is gone? but is there a way? or can i use some other method? I noticed there is this USB flashing thingie if i press the volume button. Any pointers you can give me to use that?
thanx bunches for your help!

Maybe it's a problem of the bootloader. Never had Version 5.14.
You could also try this and then try to reflash your device:
# Download the XDATools ftp://xda:[email protected]/Wallaby/Tools/XDATools.zip and extract them
# Go to a DOS prompt and CD to where you have extracted the XDATools
# Type 'pnewbootloader bootloader_v5_15.nb0' to write the Wallaby 5.15 boot loader to the device.
The output looks like this:
D:\XDAtools\binaries>pnewbootloader_40116 bl515.nb0
Copying D:\XDAtools\binaries\itsutils.dll to WCE:\windows\itsutils.dll
in FindFlashInfoOffset
protection found at 8c0d60f8
result: 00000000 00000000

stefan when i try to do that, the first message that pops up is "Do not run this tool unless; you want to downgrade your 5.17 bootloader to 5.15 you have somehow managed to overwrite... "
Now i do not know if i have 5.17 or no.. as i said i had given you the version from the screen that comes up when u reset while pressing the power switch..
in any case i did a yes.. and it said "Unable to find flash info offset, cannot disable bootloader writeprotect"
thanx bunches!

stefan.. sorry if i m being a pain.. as i mentioned in the last post the bootloader doesnt work.. i think my problem is similar to these guys
http://forum.xda-developers.com/viewtopic.php?t=7646
but i do not have access to an external SD card writer.. so i was looking at this article..
http://forum.xda-developers.com/viewtopic.php?t=2110
i have the mtty utility and i can get to the USB prompt, can i somehow use that to flash the bootloader and the rom? where do i get those files and emm is the method safe?
thanx again for your help

oh btw.. i saw this post..
http://forum.xda-developers.com/viewtopic.php?t=21264
i went over the steps that u had mentioned for making the SD card.. from the device itself..
You require a SD-Card with >= 64 MB
XDAtools ftp://[email protected]/Wallaby/Tools/XDATools.zip
Your downloaded ROM from my kitchen
step1) Boot your XDA up normal and connect via active sync (guest partnership is ok)
step2) Copy all your data of your sd-Card to your local PC otherwise all data on it will be gone
step3) Enter bootloader of your device by pressing On/Off and doing a softreset
step4) After the Message GSM OK press the Contact Button of your device
step5) Navigate with the pad to "CE+BOOT TO SD"
step6) Confirm this with the Action Key (Press the middle of the Navigate-Pad)
step7) After finishing enter again bootloader by holding On/Off and doing a soft reset
step8) Bootloader should tell you something tah OS is detected on your SD-Card
If No -> Problem
If Yes -> continue
i have problems more advice?
thanx bunches!

one thing.. if i take CE+ROM->SD of another device (going a reset with power switched pressed and pressing contacts button), and i put that SD card in my device and boot, i shud get an option to update the ROM from the SD card right?
if i dont.. is there anything that i can do?
thanks
IGA

Same problem. couldn't even boot up using an SD card. I can't even find the wallaby patch
I tried OSImageTool to flash using USB Activesync.
here's what showed up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

How do I revert to my old ROM

I have tested and tried both ROM 4.00.11 ENG and ROM 4.00.16 T-Mobile on my O2 XDA but unfortunatelly, the performance result wasn't quite as I expected as a conclusion "I am more satisfied with my old ROM 3.20.16 ENG" but the problem is " how do I get back to my old ROM?" Please help!!!
if you have backup on SD , it is easy to restore it!
Unfortunately, I wasn't able to do that but I was able to download ROM 3.17.03 ENG nk.nb1 at Jeff Summer's kitchen, will that help? and how do I go about this?
Hi, look at idiots guide on this forum:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
Altough I haven't had time to try it yet. :lol:
ritmo-unido said:
Hi, look at idiots guide on this forum:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
Altough I haven't had time to try it yet. :lol:
Click to expand...
Click to collapse
I've done now and it works spot on!
Oh Christ! Does this mean I have to purchase an SD card reader in order to do all of these? Well, this really serves as a lesson to curious idiots like me who loves experimenting...
:lol: Yep! You can grab a cheap one in the ebay auctions, about £7.00.
Any way, don't give up, if you don't experiment yu never learn!
Keep it up!
:lol:
Ebay is going to take sometime before I get the SD reader, so I'll probably drop by to the mall today to get one.
Thank you so much for the help!
I dropped by at a mall this afternoon and bought myself a cheap generic SD card reader worth $ 17. When I got home, I wasted no time installing my new SD reader--everything was plug and play. After I was done setting up, I immidiately carefully went on through the procedures you posted. Unfortunately, during the process I realized that I'm using a 5.17 bootloader so I was forced to do things the hard way--I was instructed to copy a certain wallaby-patch-tool.nb2 to my SD card using the XDArit program so it would force the bootloader to bypass key checking, but when I tried writing the file to my SD card under diagnostics like as instructed at XDArit page an error message appeared saying " FAILED TO OPEN DEVICE \\.\PhysicalDrive2 " in other words I couldn't write the damn file to my SD Card! What should I do now? I Really need some help here...pls...
I just solved the problem I posted earlier, it was simply a bug in the new XDArit program so what I did was to download an old XDArit program. So what am I supposed to do next after patching my wallaby bootloader 5.17 in order to revert to my old rom?
To be honest, I've only tried with Wallaby bootloader 5.15, I don't know if there is much difference between the 5.15 and 5.17???
When you do the reset what does it say on the Wallaby bootloader?
I finally managed to flash my ROM back to 3.20.16 ENG. All it took was for me to do the process over and over. Althgough inconvinient but it worked!!! So thanks anyway!!! :lol:
ohenry774 said:
I finally managed to flash my ROM back to 3.20.16 ENG. All it took was for me to do the process over and over. Althgough inconvinient but it worked!!! So thanks anyway!!! :lol:
Click to expand...
Click to collapse
I'm glad it worked.
You're welcome!
ohenry774, which version of XDAwrit worked for you and where did you get it? Can you kindly share? I have the same problem as you did and would love to get a hint. Thanks in advance.
could somebody post bootloader 5.17 (read out from the XDA *.nb0) ?
I will take a look the problem of 5.17.
my email [email protected]
Which tool should I use to extract the 5.17 bootloader? Will send asap. Thanks for your offer to help.
k_kirk said:
Which tool should I use to extract the 5.17 bootloader? Will send asap. Thanks for your offer to help.
Click to expand...
Click to collapse
Get in bootloader, backup boot and OS to SD card.
Using XDArit to read out bootloader file via SD card reader.
I upgrade/downgrade bootloader 5.22 to 5.15/5.15 to 5.22 many times without any problem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There's no need for you to downgrade anymore your 5.17 bootloader all you need is go to http://xda-developers.com/XDArit/ Please read and follow the instructions carefully. By the way, all the programs you need are there. In case, it didn't work just reply back to this page and I'll help you thoroughly and post step by step all the things I did to make it work.
cgigate wrote:
Get in bootloader, backup boot and OS to SD card.
Using XDArit to read out bootloader file via SD card reader.
Click to expand...
Click to collapse
When I do Power Button + Soft Reset I only see GSM OK and when I touch the rocker keys I get into a diagnostics menu. I think thats the curse of 5.17. Any idea how I can get in the bootloader and back
boot and OS to SD card? Sorry to be such a pain.
ohenry774 wrote:
There's no need for you to downgrade anymore your 5.17 bootloader all you need is go to http://xda-developers.com/XDArit/ Please read and follow the instructions carefully.
Click to expand...
Click to collapse
Thanks. I have done this countless times. The version of XDArit there is 1.02 and it gives me the same error you faced (ie " FAILED TO OPEN DEVICE \\.\PhysicalDrive2 " etc). You mention that you were able to overcome this issue by using an earlier version of this tool. Can you kindly post where you go the earlier version?
Both your assistance is most appreciated. Regards
Here is where to get XDArit 1.0 http://givemebeer.com:8080/warez/XDA/xdarit.exe
Wallaby Bootloader 5.17 is such a pain in the ass! but like I told u there is a way around it. Bootloader 5.17 as we very well know is incorporated with a key checker, so what you should do is download a wallaby patch from the earlier site I posted and write it to an empty SD card using the XDArit program(remember to choose option 1k under hearder). Then insert the SD card to your XDA and press hold power Button and Soft Reset and a diagnostics sign will appear. Upon seeing the Diagnostics sign immediately prees rocker keys under the display screen which will bring you to a new window that looks like this:
Boot -> SD
CE -> SD
Boot+CE -> SD
Restore SD
About
Exit
If you don't have an extra SD card, then just simply remove the SD card on your XDA without exiting from the window. Insert the SD Card again to your SD Reader and format it. Then write the file NK.Nb1 to your SD card (under header 3.5k) and in any case that you don't have NK.nb1, you could simply go to http://cuba.calyx.nl/~jsummers/ROMkitchen/ and cook any ROM you like under zipped NK.nb1 format which is about 14-15mb.
Follow these simple steps on how to properly write and install NK.nb1 on the SD card to your XDA
-Open XDArit and click Write to SD card
-Select header 3.5k and check Windows CE
-Under Windows CE, browse for the NK.nb1 file that you downloaded or want to install and select it
-Please make sure that the only checked option is Window CE
-Then click ok!, and you will see that it will start writing the NK.nb1 to your SD card (approximately 5mins)
-After it's done writing, Remove the SD card and plug it to your XDA
-Then select Restore SD and press action or the rocker key
-A message will again appear asking whether you want to abort or continue, just select continue and it will proceed with the installation and flashing
-Never disturb your XDA and wait until it finishes in writing the ROM
FLASH AT YOUR OWN RISK!!!
I will not be hold liable to any damages on your XDA!!!

How to flash your Polaris using the microSD card [Guide]

**IMPORTANT***
Please make sure you have HardSPL on your device. And also make sure you have more than 50% of battery left or you can plug in a charger just to make sure there is no power failure. DO THIS AT YOUR OWN RISK.
please use a ROM that is meant to be used with the Polaris. Please note that this method is meant only for the HTC Polaris, for other devices please refer to their respective wiki.
Instructions
Get a MicroSD card that is formatted as Fat32. The card must be formatted as Fat32 otherwise it will not work. It doesn't need to be blank or freshly formatted (but it wont hurt if it is)
Find the ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "POLAIMG.nbh". Depending on the source of your ROM file, it may not be named RUU_Signed.nbh, but just rename the nbh file you obtained to POLAIMG.nbh
Copy the file POLAIMG.nbh to the root of your microSD card
Plug the card into the phone, then enter boot loader mode by pressing down the Camera button, then using the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears.
You will first see a tri-color screen then the information on the card. Press power button to start flashing.
After all these are done, press the reset button located at the bottom of the phone to reset the device.
The procedure can be also used to flash Radio ROM's to your device.
Cheers,
Taiseer
Thanks for this guide!
Now also linked in wiki.
Thax for this guide!! I just wonder how the flash from memorycard is suppose to do I know now just great!
For some strange reason that doesn't work.
nice. might have to compile all these guides into one and make a sticky post when i find some time.
rev3nant said:
For some strange reason that doesn't work.
Click to expand...
Click to collapse
Its been tested several times l
taiseer999 said:
Its been tested several times l
Click to expand...
Click to collapse
I'm really happy with that. But it doesn't change anything. Maybe the phone doesn't recognize the card while in loader (SDHC) or whatever. It just flashes the 3-color screen and tries to continue loading.
Is ur PDA a Touch Cruise or an XDA Orbit II?
rev3nant said:
I'm really happy with that. But it doesn't change anything. Maybe the phone doesn't recognize the card while in loader (SDHC) or whatever. It just flashes the 3-color screen and tries to continue loading.
Click to expand...
Click to collapse
I am using a sanDisk 4GB SDHC and I've never formated it, used the same card in my Kaiser as well. You might want to try to format it
am having the same problem the bootloader just flashes up and then it continues to load as normal .
am running a TC
4gb SDHC fat 32
HardSPL
battery over 50%
hawk eye tim said:
am having the same problem the bootloader just flashes up and then it continues to load as normal .
am running a TC
4gb SDHC fat 32
HardSPL
battery over 50%
Click to expand...
Click to collapse
When you put your phone on bootloader mode; whats the info displayed?
just figured it out
you need to press and hold the camera button and give the reset button a quick press (do not hold down) and only release camera button when bootloader starts.
i am off flashing know
ttfn
taiseer999 said:
When you put your phone on bootloader mode; whats the info displayed?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have the same problem, when I go in boot loader mode the upgrade don't start but remain in boot loader.
adrenalynik said:
I have the same problem, when I go in boot loader mode the upgrade don't start but remain in boot loader.
Click to expand...
Click to collapse
its a sd card problem you r going have to format it
taiseer999 said:
its a sd card problem you r going have to format it
Click to expand...
Click to collapse
I have re-format in fat32 with windows but don't work...
my polaris screen displayed ''loading...''
what will dispaly on screen when finish????
taiseer999 said:
**IMPORTANT***
Please make sure you have HardSPL on your device. And also make sure you have more than 50% of battery left or you can plug in a charger just to make sure there is no power failure. DO THIS AT YOUR OWN RISK.
please use a ROM that is meant to be used with the Polaris. Please note that this method is meant only for the HTC Polaris, for other devices please refer to their respective wiki.
Instructions
Get a MicroSD card that is formatted as Fat32. The card must be formatted as Fat32 otherwise it will not work. It doesn't need to be blank or freshly formatted (but it wont hurt if it is)
Find the ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "POLAIMG.nbh". Depending on the source of your ROM file, it may not be named RUU_Signed.nbh, but just rename the nbh file you obtained to POLAIMG.nbh
Copy the file POLAIMG.nbh to the root of your microSD card
Plug the card into the phone, then enter boot loader mode by pressing down the Camera button, then using the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears.
[*]You will first see a tri-color screen then the information on the card. Press power button to start flashing.
[*]After all these are done, press the reset button located at the bottom of the phone to reset the device.
The procedure can be also used to flash Radio ROM's to your device.
Cheers,
Taiseer
Click to expand...
Click to collapse
how do i konw the flash done or not?
scholescheng said:
how do i konw the flash done or not?
Click to expand...
Click to collapse
You'd be notified.
taiseer999 said:
You'd be notified.
Click to expand...
Click to collapse
thx, i am still waitting my polaris "loading..."

How to save my bricked HW6915 after flash failure?

I tried to flash my 6915 to 1.21UK English but while writing I accidentally unplugged the cable and now the unit is stuck at the HP logo page (blue and white screen). It will not go forward anymore.
I tried to reset with two buttons between the Green and Red buttons and I have "Serial - HP Invent - vG3.9" screen, then changed to "USB - HP Invent - vG3.9" when plugged into PC. Then I ran "UNI_ExitBootloader" as suggested by someone but it revert to the Logo screen again. I guess I bricked the unit.
Is there a way to bring the unit back to life by flashing using the SD card method? If so where to find the material and the tutorial?
Urgent help please!!
http://forum.xda-developers.com/showthread.php?t=429358
delete RadioFS.nbf and RadioOS.nbf!
Never change the radio!
Will delete GSM!
Sorry for BAD english.
Bilek2411 said:
I tried to flash my 6915 to 1.21UK English but while writing I accidentally unplugged the cable and now the unit is stuck at the HP logo page (blue and white screen). It will not go forward anymore.
I tried to reset with two buttons between the Green and Red buttons and I have "Serial - HP Invent - vG3.9" screen, then changed to "USB - HP Invent - vG3.9" when plugged into PC. Then I ran "UNI_ExitBootloader" as suggested by someone but it revert to the Logo screen again. I guess I bricked the unit.
Is there a way to bring the unit back to life by flashing using the SD card method? If so where to find the material and the tutorial?
Urgent help please!!
Click to expand...
Click to collapse
hi. add me on yahoo messenger : cata_cata_cs so i can help you.
Still no good saving the brick
Thanks SPGI, for the response.
I tried both methods (sable_ruu from both .rar and .exe downloads) but both gave me same "error 601" message, saying "client_initialize fail". Please help with other options.
Monday will upload recovery rom from SDCard for hw6915 1.21UK OK?
Upsss upload now! Click
(only 10 downloads non premium account) Sorry.
this is worked dumped OS rom from hw6915 and SPL form hw6945. Worked fine on my hw6915
Need 128,256,512 or 1 GB mini SD card (no Kingston!)
Steps 1:
Open WinHex Editor
File->Open->OS_hw6915_SPL_hw6945.bin
Edit->Select All
Edit->Copy Block->Hex Values
Step 2:
Tools->Open Disk-> Physical Media-> (you mini SD card from card reader)
Put cursor to 0x0
Edit->Select All
Edit->Fill Block->Fill with hex values (A8)
Put cursor to 0x0
Edit->Clipboard data->Write
Save. Close all files and physical media and Hex Editor.
Put SD Card to HTC Sable
(for best result WinHex to save in physical media: in WinXP - Run as administrator..., WinVista- special administrative rights or in Safe mode Run as administrator...)
Step 3:
Battery charged over 80%
Put HTC Sable in Bootloader
Press Power Buton+Action Buton+Action Buton+Soft reset
In bootloader mode, it should show up with “press power to start", press power.
Wait up to 100% (or 10-15 minutes)
After completed procedure (view monitor htc sable to "Check sum is OK! COMPLETED") soft reset.
It is!
This procedure is free to use but at your own risk, I take no responsiblity for any conflict, fault, or damage caused by this flashing procedure.
No response from unit
Hi,
I followed your procedure and did it about 10 times but never got the unit to boot and flash from SD card. I understand essentially your procedure copies the ROM image into the SD card and place into unit, put it into BootLoader mode by pressing "function button+function button+soft reset". But the unit only show the "Serial + Logo + vG.39" screen, and stop there. I tried the "power button+call button+end button+soft reset" but got the blue+white screen and stuck.
Please help with any solutions.
what is the SD Card. This procedure work 100% on the device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SD card
I used a empty Nokia 128MB mini SD card, from my unused phone. You think changing the card will work?
I formatted the card in FAT before the operation. What I can see is the WinHex Editor replaced from location 00x0000 with all "A8", then write from same location with the binary image of the ROM file from clipboard. But should there be a boot sector before the ROM image?
Thanks for responding.
WinHex direct write rom file in SDCard, not need to format!
PUT CURSOR IN WinHex to position 0x00000000 and write image directly to Physical Media.
Follow the steps!
The steps
This is a description of steps I took:
1. Use WinHex to open ROM file, copy from location 0x00000 the ROM image to clipboard.
2. Open media (Nokia 128MB) and fill from location 0x00000 with all "A8".
3. Write onto media with ROM image in clipboard from location 0x00000, first words show "sable.....".
4. Save content to media.
5. Close all programs.
6. place media in HW6915, push power button, screen show blue-white HP logo.
7. Push "power+action button+action button+reset", screen show "serial - HP Invest - vG.39", stuck!!
I also tried push "power+call+end+reset", the unit show blue-white screen and stuck again.
It is as if the unit has lost the ability to boot from SD card, or even read from SD card.
Pls help.
Thanks for responding.
tctctctcttctc
(Press Buton 4+Buton 12+ Buton 8 + Soft reset)
Good lock!
(or maybe you have a problem with the card slot in device... and for Nokia SDCard, i'm not sure. Sorry.)
1.21UK ROM image
Please send me your original 1.21UK ROM image, may be the 6915+6945 ROM I downloaded does not work.
Or if there is a place to download.
Thanks,
1.21UK from SD Image: Click
(only 10 downloads, non premium account)
Final act
Thanks SPGI, for your help, I have exhausted all means to revive the d*** thing. I had dump it into the trash can and of this morning, the garbage truck is carrying it to its final destination.

[Q] my tatoo locked,i cant access any thing!

hi guys
i have some problems on my friends htc tatoo
i dont know what he didi,but the phone locked after start up and wanted to sign in whit my google account to unlock!
but i cant access setting to set connection setting for internet
and icant connect with wi-fi network because the phon is lock and i cant turn wi-fi on!
i cant acces recovery menu because the phone wasent rooted and flashed any recovery menu
no nandroid back up exist!
so my friends tatoo just turn on and off and i cant do any thing with it!
even i cant change the rom
if somebody knows please guide me
thanks all
pictures :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
note : in pictures the simcard wsent inserted ,but if i insert the simcard, its still the same!
I have exactly the same problem - with a friends HTC Tattoo.
I even tried factory reset (while phone is off - press Menu+Back+TurnOn) but nothing happens.
You can flash the official rom again if you cannot wipe. Running the RUU utility, take the rom.zip from user's temp folder and rename it to CLIKIMG.zip
Then copy it to root of sdcard and reboot to fastboot. I don't remember the key compinations, but you can find them if you search the stickies of this forum.
ikenny said:
I have exactly the same problem - with a friends HTC Tattoo.
I even tried factory reset (while phone is off - press Menu+Back+TurnOn) but nothing happens.
Click to expand...
Click to collapse
i done it for now,and the screen lights is on and off repetitive and it takes until i pushed the buttons,then when i release the menu+back keys,the phone boots and still the same problem
dancer_69 said:
You can flash the official rom again if you cannot wipe. Running the RUU utility, take the rom.zip from user's temp folder and rename it to CLIKIMG.zip
Then copy it to root of sdcard and reboot to fastboot. I don't remember the key compinations, but you can find them if you search the stickies of this forum.
Click to expand...
Click to collapse
how can i runnig ruu utulity? from pc?
where can i finde ruu?
thanks
edit:
i found some RUU from link blow:
http://shipped-roms.com/shipped/Click/
but i dont know which one must be downloaded!
i know it must be asia version,but which asia?!!
on more thing :
this is a exe file,how can i copy it in sdcard and run it?
i searched many topics,but cant finde fastboot guidance
please guide me my friend
I can't help you if you don't know what rom you have. You can try them though, if is they aren't suitable the didn't flash.
You must run RUU utility from pc, and will extract the rom.zip file in your temp folder.
You can access fastboot if you power off the device and hold volume down and power button. After that in fastboot you can flash the rom pushing the volume down key.
dancer_69 said:
I can't help you if you don't know what rom you have. You can try them though, if is they aren't suitable the didn't flash.
You must run RUU utility from pc, and will extract the rom.zip file in your temp folder.
You can access fastboot if you power off the device and hold volume down and power button. After that in fastboot you can flash the rom pushing the volume down key.
Click to expand...
Click to collapse
thanks my dear friend
going to test it....
finaly the phone lock is opened
HDRAGON said:
thanks my dear friend
going to test it....
Click to expand...
Click to collapse
i tried the version RUU_Click_HTC_Asia_WWE_SEA_1.67.728.8_release_signed_NoDriver
from the link in my previouse post,
nothing was extarcted ! its begining to update rom just from pc to phone!
i installed htc synce for android devices it first and fortunately the phone was found by pc!during it was in lock screen!
i did run the update file and its begining to flash the phone
atlast the phone flashed and the new version startig up
special thanks to dancer_69, my dear friend for his guidance

I'm really stupid and i need help please

hi all i tried everything but i have a problem
i tried to install sense 3.5 nand version but i forget to copy it to my sd and started bootlader.bet and afterward recovery..and since then my phone gets to fastboot..i got to 3 colors and tried to install my shipped rom but nothing happens what do i do?
liorderei said:
hi all i tried everything but i have a problem
i tried to install sense 3.5 nand version but i forget to copy it to my sd and started bootlader.bet and afterward recovery..and since then my phone gets to fastboot..i got to 3 colors and tried to install my shipped rom but nothing happens what do i do?
Click to expand...
Click to collapse
at last step, that you will return to WM and nothing happened,
that should be wrong shipped ROM that you install,
please check your IMEI number at HTC website
and download the right shipped ROM again.
Reinstall recovery if it doesn't work..
Then enter recovery, go to "Mounts and Storage Menu" and mount usb...
Copy the .zip file and install it
thank you but i cant find the download page on htc's site and i have no idea what rom i need to d/l
Mystikal57 said:
Reinstall recovery if it doesn't work..
Then enter recovery, go to "Mounts and Storage Menu" and mount usb...
Copy the .zip file and install it
Click to expand...
Click to collapse
its my first time im tring to install nand version, what does it mean reinstall recovery?
Start bootloader.bat
Again go to LK bootloader
Start recovery.bat
Now reboot in to recovery
When you are in fastboot (photon connected) launch recovery.bat
It will reboot, and to enter recovery just keep "volume +" at white screen and wait for menu
Mystikal57 said:
Start bootloader.bat
Again go to LK bootloader
Start recovery.bat
Now reboot in to recovery
When you are in fastboot (photon connected) launch recovery.bat
It will reboot, and to enter recovery just keep "volume +" at white screen and wait for menu
Click to expand...
Click to collapse
hi i got into recovery and mounted sd card but when i transfferd the zip file it got stuck
liorderei said:
thank you but i cant find the download page on htc's site and i have no idea what rom i need to d/l
Click to expand...
Click to collapse
you can find your IMEI on the website below, but there is Chinese,
so, please follow the attached photo to fill in your IMEI and check where is ur mini to sale.
http://www.chahtc.com/imei.php
after find mini sale location then D/L the shipped ROM as below
http://shipped-roms.com/index.php?category=windows mobile&model=Photon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
try with another sd card
first of all thank you for your help, when i get to the recovery menu i try go to mount and storage then mount usb storage and i have access through the computer to the sd card i copied the sense 3.5 went to install zip from sdcard chose the file and it wrote finding packege then opening packege and then it get stuck whats wrong?
it could be long (10-30 mins), depends of your sd card.
Maybe your sd card isn't very good and not compatible with android.
Try to format your sdcard or try another sdcard
Thank you mystikal for everything i switched the sd card, copied the rom and it worked perfectly :beer:
You helped me alot!!!
Sent from my HTC HD Mini using XDA

Categories

Resources