Related
Hello,
My backup battery did not recharge any more. Now, I can not even turn it on (the main battery is fully charged). In my area, there is no replacement.
So, what should I do now to make it work again?
Thanks
your post is a llittle tricky.. how did you know that the backup battery did not charge? and the main battery is full? when you can't even turn your XDA on?
have you tried to hard reset your phone? it might just be a software problem..
I had a trip for 2 days without my xda, and when I came back, I could not turn it on, I guessed that the battery is empty. So, I put it on the cradle, nothing happened. I noticed there were a socket on the cradle to put the second battery. I removed the main battery and put the main battery on the cradle. The led showed in red indicating the main battery were charging. And I put my xda on the cradle again, the red led showed too. After a while, I noticed the led changed from red to blue. It indicated that the main battery is full. I got the main battery out of the cradle. But my xda still in red. I tried for several time, nothing changed. And I put the main battery into my xda. It turned on. And there were a message saying "The backup battery is extremely low, please change or recharge as in the manual". I ran the battery application, it said that the main battery were 100% and the backup battery were 0%. The software started to install like to make a hard-reset. When it finished installing. It were soft-reset automaticely as usual. But the backlight of screen is turn off, and the picture look dummy. That ware exactly the time I can not turn my xda on anymore.
Now, there is something so strange with my xda. When I put it on the cradle without the main battery, the led lights in red in about 20 minutes and then turn off automaticly. But when I put it with the main battery, nothing happen.
I did try for hundred of times, but nothing changed. I guess that my xda is dead.
So sad.....
Maybe your XDA has a problem in its charge pins.
You should let it checked by someone.
I had the same problem as you before, but I exchanged that XDA with the new one :roll:
did you actually hard reset your phone yet? something like this happened to me two nights ago.. my phone went low on batt so i charged it and it was ok then so i turned it off so that it could charge better.. when i came back to check, i cant turn it on anymore so i disconnected it from the charger.. i took off the battery and placed it back.. but my phone didnt respond anyway.. no lights no nothing! my last resort was to HARD RESET my phone.. by placing back the battery and holding the power button while i press the reset button with the stylus.. and voila it's up again..
thanks for everyone, I did find out the problem, that is the backup battery,
I openned my xda and remove the backup battery, It works just like before. I also experience that If the backup battery is dead then we must remove or change the new one then the phone will work. It will not boot or charge with the dead one inside.
Why take out the battery and charge it separately ?
Just put the battery back to xdaII and place the xdaII in the cradle and charge it together. :roll:
im very sorry for my late reply.. if only you recieved it earlier you didnt have to open your XDA and void your warranty.. but it's good that it's ok now!
same here
i have exactly the same problem with my backup battery...i just got my xda 2i today and I tried to charge it up the main battery quickly went up to 100% but the backup battery has stuck into 75% and after a while the orange light become green as if it has charged. It takes either a soft reset or I need to disconnect (either from cable or cradle) and connect again in order to become orange and probably to start charging again...
what's wrong with the damn thing?
yanni
I put my phone (T-Mobile MDA VARIO) on charge last night before I went to bed, nothing strange about that, but this morning the phone was completely dead ,wouldnt charge, no lights, wouldnt boot etc.
After searching this forum I found what I thought was the fix for a dead battery (3 AA batteries/wires etc) I did this and the phone now boots and says its chargeing, but only if I charge using USB, it wont do anything if I use the wall mains charger
If I take off the wires/AA bateries, the phone shuts down and wont charge, but as soon as I put the wires/batteries back on it works as normal.
While the phone is running I looked at the power application & it shows the battery chargeing, but wont hold any charge at all
obviously I cant walk around with 3AA batteries & 2 wires attatched to my phone.
does anyone have any suggestions please
cheers
Phil
I'd look into a new battery...
If this were a notebook battery I would say the cells had collasped.
exact same thing happened to me last night. I think there is an issue with charging the wizard when its off, like it doesn't know when to stop charging and it overloads the battery. Do you happen to have the link for that 3 batteries and the 2 wires trick, I want to give it a go. Thanks.
My vario has died. Went to bed a few nights ago and put it on charge as usual. Woke up the next morning and it was dead.
No power, no lights, nothing. I have removed the battery, tried a different charger, made sure no buttons are stuck down.
Any thoughts would be appreciated.
Mine died too!
I had oc-ed it for a year now on 240 MhZ (using Omapclock), which has never been a problem.
Yesterday my radiosignal went away so i had to reconnect it. After that i started Tomtom. After a minute the PDA resets itself. Again troubles finding a radiosignal. Than the image started to get blurry (while finding a signal) so i restarted again (soft reset) and it came never back alive.
Battery was OK, i tried a hard reset but nothing. Hopefully i can find a way to un-brick this thing.
Not exactly the same circumstances as my phone but very unfortunate all the same...
phupton said:
My vario has died. Went to bed a few nights ago and put it on charge as usual. Woke up the next morning and it was dead.
No power, no lights, nothing. I have removed the battery, tried a different charger, made sure no buttons are stuck down.
Any thoughts would be appreciated.
Click to expand...
Click to collapse
There is a 9-volt battery trick somewhere on these forums here to give your battery enough charge to reboot the phone so you can then charge it. Try searching for this. It saved me when I made the mistake of mixing 1.xx bootloaders with a 2.xx rom and couldn't charge my phone.
Did you flash anything prior to retiring for the evening the night it didn't charge?
What type of charger did you use to charge with? Some chargers for the Wizard are notorious for not working when the device is not booted fully into windows.
deeluh said:
Mine died too!
I had oc-ed it for a year now on 240 MhZ (using Omapclock), which has never been a problem.
Yesterday my radiosignal went away so i had to reconnect it. After that i started Tomtom. After a minute the PDA resets itself. Again troubles finding a radiosignal. Than the image started to get blurry (while finding a signal) so i restarted again (soft reset) and it came never back alive.
Battery was OK, i tried a hard reset but nothing. Hopefully i can find a way to un-brick this thing.
Click to expand...
Click to collapse
Ouch this sounds like a hardware issue I don't think your device is bricked just worn out I hope I am wrong though.
sorted.
I have been using a Motorola V3 charger to charge my pda for about 6 months without problems. All of a sudden it no longer wants to charge when connected to it.
Last night I got the real charger out of its packaging and plugged it in. Hey presto its back online....
Strange...
Hi guys.
Well, a month or two back i updated my imate kjam to WM6 and absolutely love it. Haven't had a single problem up until now.
Last week i did a soft reset on the phone (after installing phonealarm) and it stuck on the wm6 logo boot screen. tried a number of resets, removing the battery etc. finally had to do a hard reset and reinstall everything.
last night a similar thing happened. the phone had turned itself off in my pocket. so i tried a soft reset and got no luck. tried to do a hard reset, got to the screen where you confirm the reset but decided i'd try a few more things before committing to losing everything again.
now i can't do a thing with it. can't even get to the hard reset menu.
i've tried leaving the battery out overnight, tried resetting whilst it's plugged into the charger, everything i can think of. isn't recognised when plugged into the usb port either.
i'm at a total loss. any help / tips would be greatly appreciated, i'd hate to lose everything on my pda, as i used this thing constantly
one weird thing is that when plugged into the charger, i don't see a LED light up to say it's charging??
mkerr said:
Hi guys.
Well, a month or two back i updated my imate kjam to WM6 and absolutely love it. Haven't had a single problem up until now.
Last week i did a soft reset on the phone (after installing phonealarm) and it stuck on the wm6 logo boot screen. tried a number of resets, removing the battery etc. finally had to do a hard reset and reinstall everything.
last night a similar thing happened. the phone had turned itself off in my pocket. so i tried a soft reset and got no luck. tried to do a hard reset, got to the screen where you confirm the reset but decided i'd try a few more things before committing to losing everything again.
now i can't do a thing with it. can't even get to the hard reset menu.
i've tried leaving the battery out overnight, tried resetting whilst it's plugged into the charger, everything i can think of. isn't recognised when plugged into the usb port either.
i'm at a total loss. any help / tips would be greatly appreciated, i'd hate to lose everything on my pda, as i used this thing constantly
one weird thing is that when plugged into the charger, i don't see a LED light up to say it's charging??
Click to expand...
Click to collapse
Is it possible that your battery may be flat?
Can you get into bootloader mode?
can't get into bootloader.
if my battery was flat, would the charging LED light up when it was plugged in?
thanks for the reply.
afer doing some more reading, it looks like it might just well be a dead battery.
apparently, wizard / kjam batteries are notorious for requiring the wall charger to get them going again once they're flat. something about needing 1000ma.
i just checked my charger that came with the unit (ebay), and noticed it only put out 850ma. going to grab my brother's jasjam charger and hope to hell it's 5v 1000ma.
fingers crossed.
i had a similar problem, and following a solution on ere somewhere i fixed it, this is done at ur own risk, im nt responsible. unplug the charger from the wall, still plugged into fone(this is to empty charger of any charge thats there) thn unplug fone and dip the end of the lead in water(yes sounds weird i no...) then make sure theres nt an excess on the end and plug into wizard adn thn the wall, should be red light and then after a few mins orange - charging hope it works
hehe
just letting everyone know it's now working again
didn't need to do any water dipping.
just plugged in brother's 5v 1000ma charger and it's now charging
OMG !! Good Goooooooshhhh
evilkern said:
i had a similar problem, and following a solution on ere somewhere i fixed it, this is done at ur own risk, im nt responsible. unplug the charger from the wall, still plugged into fone(this is to empty charger of any charge thats there) thn unplug fone and dip the end of the lead in water(yes sounds weird i no...) then make sure theres nt an excess on the end and plug into wizard adn thn the wall, should be red light and then after a few mins orange - charging hope it works
Click to expand...
Click to collapse
hi
hope ur serious about ur method,well sry to say....... never heard of such a method before, I'm not making any fun of u or plz don't take me wrong , I don't mean any harm.
I just can't believe it cud happen like that,after all water dip will certainly short circuit and burn it.
well, just for my knowledge, have u ever tried this urself ?
zabardast_1 said:
hi
hope ur serious about ur method,well sry to say....... never heard of such a method before, I'm not making any fun of u or plz don't take me wrong , I don't mean any harm.
I just can't believe it cud happen like that,after all water dip will certainly short circuit and burn it.
well, just for my knowledge, have u ever tried this urself ?
Click to expand...
Click to collapse
I thought exactly the same when i read it first, but since my phone wasnt turning on, gave it a go and it worked! As i say sounds odd but apparently its somthing to do with the circuits controlling the charge, if theres not enough power then obviously they wont work, so this way does...sounds odd but works! I just had a quick search and cant find the original thread, it was an alternative to the 9 volt battery solution
evilkern said:
I thought exactly the same when i read it first, but since my phone wasnt turning on, gave it a go and it worked! As i say sounds odd but apparently its something to do with the circuits controlling the charge, if theres not enough power then obviously they wont work, so this way does...sounds odd but works! I just had a quick search and cant find the original thread, it was an alternative to the 9 volt battery solution
Click to expand...
Click to collapse
well than I must say u got a brave heart,If had that choice ,i wud have thought 10 times and still said No
As u said that u had gone for it and did and were successful,do believe u now. In that case its very valuable information thanks
So your saying to dip the end of the charger plug into water?? It sounds like really all you would be doing is cleaning off the terminals of dust or debris that could be impeding a connection of some sort.
Hello,
Last week I was using my phone as usual, I put it on my desk for about 5 minutes and when I came back it had turned off. I tried putting it on charge but the orange led doesn't show any activity. The phone doesn't turn on and doesn't do anything. I tried booting it on recovery but that didn't do anything else. I also took off the battery and put it back several times.
Help!
rikikimaru said:
Hello,
Last week I was using my phone as usual, I put it on my desk for about 5 minutes and when I came back it had turned off. I tried putting it on charge but the orange led doesn't show any activity. The phone doesn't turn on and doesn't do anything. I tried booting it on recovery but that didn't do anything else. I also took off the battery and put it back several times.
Help!
Click to expand...
Click to collapse
try cleaning the battery contacts and also the usb contacts, i had mine where it wouldnt charge all night and died and it was just dust caught on the +5v pin of the usb connector.
There is lost of dust in the usb connector, you should try to clean it. The battery might be dead, you can try to buy another one but...
That didn't work. (does the led light turn on if there is no battery in the phone or it must have one inside?)
It does need to have one inside to lit the led
If you know someone with a DHD, you should try his battery. But your phone is probably dead... Fortunatelly, the GS3 will be announced soon !