I have this problem on my magician....everywhere i tap (active sync-program folder-file explorer.). the program don't start....i f i push contact button it say: memory program exausted___goto settings---memory and close all program .....but i have all empty! 22 megabyte of memory program and 22 of memory storage...how can i solve this problem? what's happened!I cant' do a hard reset because i have documents on my phone and activesync don't work!!!
PLEASE HELP ME!!
Hvae you activesynced with your pc?
Do that first to copy off what you can.
Then, just soft reset the PDA (NOT hardreset).
What happens then? Do you get the memory problems from soft reset?
Try soft reseting and leaving the usb lead cable attached to get activesync to backup your contacts etc immediately after PDA boot up.
What CAN you do? Does the start menu work? Does the control panel work?
V
too
It happens to me sometimes too.
A soft-reset usually works for me.
(I hate how much i need to do that b.t.w. I NEVER had to reset my Psion in the 6 years I used it!)
greetz,
Pfeffa-rah
Related
dear all
i can not run activesincron in the pc with my xda2 true the usb cradel
but the bluetouth work fine also the cradel work
he charge the device
please have you any suggestion ???
the device is too slow the are any suggestion ???
i have qtek 2020 with
Rom 1.66.02 FR
Date of rom 02/23/04
radio ver 1.10.00
protocol 1337.18
ExtRom 1.66.211
make sure you have ActiveSync 3.7.1 or re-install it ... delete and re-creat the partnership if needed
Biso007 said:
make sure you have ActiveSync 3.7.1 or re-install it ... delete and re-creat the partnership if needed
Click to expand...
Click to collapse
hi biso007
thank's for your replay
yes i do it but noting
the strange that i can by connected true bluetooth
i dont like to make a hard reset .... :evil:
have you tried opening activesync on your pocketpc
clicking tools
clicking option
clicking options
clicking enable pc sync when using this connection
and choosing 'USB ?
Rudegar said:
have you tried opening activesync on your pocketpc
clicking tools
clicking option
clicking options
clicking enable pc sync when using this connection
and choosing 'USB ?
Click to expand...
Click to collapse
hi rudegar
thank's for your replay
yes
this config is standart and i dont change it
the device work before its only today i dont know whats hapend
also i remove all soft that i install today
checknotifications
clearnotify
phoneled_on-off
Pocket_Hack_Master
i remove all this and i make a soft reset many time
but nothing
also the are no conflict into the usb device and the cradel is know well by the pc
i suggest if there are no pin connection broken (but i see well no pin broken ) it's a software configuration
but how .....
sacaman
and activesync is set to use usb also ?
I had exactly the same problem about a month ago and after trying everything under the sun and nothing working i eventually ended up doing a hard reset,
It fixed it instantly so i restored all my data from a backup and it stopped working straight after the restore,
i hard reset once again and it synced ok, so i then had to reinstall all my programs individually rather than restoring the backup, it was very annoying but i dont think theres any other way around it
hi all
thank's for your response
it 's ok now but after making hard reset :evil:
i mst install software one by one to know who create this problem
and i keep you informed
by after all backup :evil: :evil:
I was installing MS Voice Command to my s200 and at the s200 there was an error and installation was not successful. After this I can not see the softwares installed in my s200 at Settings/Remove Programs. Also activesync started to give an error and I can connect as Guest :?
What is the problem and the what can I do to repair? I wish there was something like system restore in WM5. I hope I wont have to hard reset.
Need help here :roll:
Hard reset does not always have to be so bad!
Look at it from the bright side:
You have a clean device again and installing your software via active sync (if you have installed it via this way before) isn't all that difficult either.
Cheer-up and make sure to buy sprite back up for when it happens again to you.
Robin
Ok that is fine. But anyone knows what may cause this and if I can solve without hard reset. :roll:
Seems no!?
HI Friends
Sometimes it happens that all internal memory is full and after we do a reset , magician nearly hangs either on the boot screen or while trying to show the Today's Links on the main screen
Is there any way to boot the magician with the least resources like safe mode in windows. As i dont have the recent backup of my magician, so i dont want to hard reset the magician which will work but on loss of data.
I tried using active sync, windows 2003 doesnt come to a point where, active sync start.. if it would hv worked i could hv deleted the big file which is creating the booting issue.
Pls help...
I tried
I Dnt know if this helps...
Use file explorer and go into windows directory of your device.
There should be a program called : safemode
Load that program and the Pocketpc will retart, while restarting a small window will be displayed, and press the middle button while this is up to load in safemode and not load any plugins you might have installed.
Hope this is enough.
when ever i try to connect my MDA to PC is get this error "Synchronization cannot be completed. Disconnect your device and try again. If the problem persists, see the Microsoft Troubleshooter in Microsoft ". i tried everything i reinstalled active sync deleted the patnership. i cannot even install anything to mda using pc so i cannot even install sprite back up incase i do a hard reset can anybody help me with this problem.
Edit/Delete Message
1) Worst case, find a backup program that you can download as a CAB right to your phone... do that first. Try www.freecabs.de
2) I assume you've done a soft reset? Try unloading all of your Today plugins, soft reset, and try again.
3) Try turning off USB Advanced Functionality on your MDA.
4) Try unplugging and re-seating the USB cable.
5) Try rebooting your computer. Try Active Sync with *nothing* else running, including exiting everything unnecessary in the system tray.
6) Try different versions of ActiveSync... for example, I have problems with the newest version, so I'm using the last beta quite happily.
There's other stuff beyond all that. Post back if it's still not working... I seriously doubt a hard reset will be necessary.
Make sure you make provisdons for any firewall and antivirus programs to allow activesync to work. You can just disable it/them one at a time to see if they are the problem first.
hi, trying to synch my wizard to eith er desktop (xp) or laptop(vista). it worked with vista briefly then stopped and has never synched with xp. the phone is charging when plugged in. xp just says windows mobile based device has found errors when installing and wont install, and vista wont recognise it apart from charging. i read that i should change the usb to pc settings in the connections tab, but i have searched the entire phone and that setting is not anywhere. i have performed many soft and hard resets, but to no avail, and also tried 3 diffrent usb cables. also tried syncing with bluetooth, but same response.
can someone please shed some light on this, as its getting very inconvenient to keep having to use the mem card for everything, and i really wanna try a new rom on this blasted thing!
thanks
try uninstalling activesync on the pc. it seems that the drivers may have been corrupted. also use a program that does secure deletion like "ccleaner" if I remember the name correctly. that shoud delete all of the files and overwrite the deleted sectors on your hard drive completely; as well as make sure tha there are no registry keys left behind.
then, restart the pc and reinstall activesync. and reset the phone before connecting.
The above is worst case senario. before doing that, try this first:
delete partnership in activesync and reset the phone. restart the computer (shut down, not restart)
then when the comp boots completely and the phone boots completely; try reconnecting again.
I once had that problem with a rom I flashed. someone forgot to put the driver into it
fixed...for now?
ok first...wow, thanks for all that!!!! second.. i think i may have fixed it! i was wandering thro the forums seeing what i could find on the subject of activesync problems...50gazillion posts later...i found this page http://forum.xda-developers.com/showthread.php?t=271174&highlight=rndis
it eemed peoples were having the same probs as me. in one post was a rndis to serial cab file, so i d/ld it and installed on my fone via the mem card, plugged fone in....synched straight away!!!! and has stayed synched so far..about half an hour. i shall post tomorrow whether it will resynch after a period of being disconnecte...fingers crossed!!!