I tried installing it and when I try to run, it reports
The file 'evm' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
Click to expand...
Click to collapse
Anyone know how?
Re: Slightly OT - how to install Jumlix? "Not signed&qu
xiasma said:
I tried installing it and when I try to run, it reports
The file 'evm' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
Click to expand...
Click to collapse
Anyone know how?
Click to expand...
Click to collapse
I've gotten this message with a few applications that I installed to my SD card. When I uninstalled them and reinstalled them to my device they worked fine. You might want to try that.
HTH,
Brett
No luck, but thanks for having a stab. I wonder if it needs the specific JVM rather than whatever is currently installed?
Related
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
baudy2 said:
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
Click to expand...
Click to collapse
ok try this one then, again transfer to phone and run it. then try the unsigned files.
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Did not help either. Still the same message....
sorry, i havent come accross anything else at the moment. if i do i will post.
l6cum said:
sorry, i havent come accross anything else at the moment. if i do i will post.
Click to expand...
Click to collapse
Thanx anyway !
If you tried the Disable Security CAB file and you're still getting that message, it's a possibility that the file was actually modified. In that particular case, you have to have the device re-signed... search for signcode here...
Disable Security CAB file unavailable
Hi, it would seem that beyondthetech has made an arrangement with his hosting company that prevents him from hosting cab files to reduce his traffic burden. Does any one have a copy of the disable security cab file as all links point to beyondthetech and no files are available from there currently
Thanks in advance
the file is on my post above and still downloads without any problems!
do you have something like this for the s620?
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Im trying to use old dictionary (16 bit American Heritage) but says access denied not digitally signed.
Sorry I found this thread with search
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
Mate, can't download the file
How do you run this file?
Sorry
I am new with treo 750 and does not know how to run it. I have tried other programs and they have all failed to install.
Please help
Thanks
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
This works on my Orange Branded HTC Touch
Not digitally signed wuth trusted certificate
thnx 4 the cab. I got same prob few days back. I just adjust the properties for cab file on my PC, clear 'unblock', transfer file again to my pda n things work. but i'm not sure of thats..maybe this cab can make work more easy n i'll try soon.
thnx bro.
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
I Can't download the file. Can someone please help me?
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
baudy2 said:
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
Click to expand...
Click to collapse
I can't help you with your particular enquiry, but I have exactly the same device history as per your signature - give or take a couple of Symbian devices along the way. I am on the HD2 at the moment. Still love the jasjar though - terrified of the day when the battery dies on me.
rjstep3
fix!!!!!!
ok go to settings (back all your stuff up) security and factory reset ok then install the disable security signed thing and your done
SlavKor said:
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
Click to expand...
Click to collapse
Unfortunately it did not solve the problem: Security Configuration Manager tries to install Tool.cab on my HD2, but without any success, "Not signed application, instalation was unsuccessful"
Does anybody have solytion, how can I manually edit the registry???
"mobile registry editor" when I try to change registry key returns with error "Not Allowed"
Please e-mail: MOD EDIT: REMOVED EMAIL
I installed a medical program that is intended for wm2003 that someone altered so it would run on wm5/6, after softreset, some programs don't run. It says "the file 'autorun' cannot be opened. Either it si not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
I get this with a lot of programs. I uninstalled this software and nogo. I can't even reinstall .net 3.5 or .net 2.0.
Weird problem...thanks
Chris
noellenchris said:
I installed a medical program that is intended for wm2003 that someone altered so it would run on wm5/6, after softreset, some programs don't run. It says "the file 'autorun' cannot be opened. Either it si not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
I get this with a lot of programs. I uninstalled this software and nogo. I can't even reinstall .net 3.5 or .net 2.0.
Weird problem...thanks
Chris
Click to expand...
Click to collapse
Happened to me too.
Hard reset was my only choice. I tried twice with the same result.
I completely deleted it as it messed up everything.
search the forum for msigner install on your desktop signs the exe and should sort the problem
chrisd1a1 said:
search the forum for msigner install on your desktop signs the exe and should sort the problem
Click to expand...
Click to collapse
Thanks, I tried it and even after signing several files, the ppc still says not signed... any ideas what files the ppc uses to check signing? Maybe I can replace those and be done.
Chris
noellenchris said:
Thanks, I tried it and even after signing several files, the ppc still says not signed... any ideas what files the ppc uses to check signing? Maybe I can replace those and be done.
Chris
Click to expand...
Click to collapse
I tried the same, deleting the files that were still installed (one ROM file was overwritten), but HR was the solution. Keep looking for the fault took longer that a HR anyway, didn't made sense at some point.
dan1967 said:
I tried the same, deleting the files that were still installed (one ROM file was overwritten), but HR was the solution. Keep looking for the fault took longer that a HR anyway, didn't made sense at some point.
Click to expand...
Click to collapse
Agreed, HR performed....still trying to find the cause though, maybe I can help someone else with an easier fix. Thanks
Chris
HTC USB Storage Device For 20262.19949
sorry, install fail
thepeaceworld said:
sorry, install fail
Click to expand...
Click to collapse
Need not to install! Download, extract, copy to PPC and run it directly!
I find it 2 days ago.
Just found. Thank.
I try to run it but my device show
"The file 'USBtoPC' cannot be opened. Either it is not signed with trusted certificate,or one of its components cannot be found. If the problem persists,try reinstalling or restoring this file"
Please help me.
lord2654 said:
I find it 2 days ago.
Just found. Thank.
I try to run it but my device show
"The file 'USBtoPC' cannot be opened. Either it is not signed with trusted certificate,or one of its components cannot be found. If the problem persists,try reinstalling or restoring this file"
Please help me.
Click to expand...
Click to collapse
I don't know what happen, but I think there's something wrong with your installed softs
Is there anyway to change the indialer backgrounds on the wing? I can find some dialer screens, but all I want to do is change the background not the buttons. Also when someone calls I would like to be able to change that background as well. I have searched all over this site and the net and can find nothing. Any help would be greatly appreciated. Thanks again.
after 3 days on here you think i would have a response. oh well guess it can't be done
beergenius said:
after 3 days on here you think i would have a response. oh well guess it can't be done
Click to expand...
Click to collapse
No it can be done. I remember reading about it a WHILE ago...but I did a little searching and this is what I came up with. Its called tdial design.
http://forum.ppcgeeks.com/showthread.php?t=7819
Thanks for the reply, but I tried that and it has an error in the file after i unzip and try to use it. May be I'm doing something wrong. Will try again.
beergenius said:
Thanks for the reply, but I tried that and it has an error in the file after i unzip and try to use it. May be I'm doing something wrong. Will try again.
Click to expand...
Click to collapse
Thats odd, i downloaded it, and messed with it, and it worked fine for me. i think there are a couple of links on the page. try a different one, or i can post the one i dloaded at work tom.
that would be awsome. thanks!
beergenius said:
Thanks for the reply, but I tried that and it has an error in the file after i unzip and try to use it. May be I'm doing something wrong. Will try again.
Click to expand...
Click to collapse
This is the file I used....it worked fine.
I guess my computer does not recognize this app. Every time I try to open it I get "the application failed to initialize properly (0xc0000135)." what the Hell does that mean?
beergenius said:
I guess my computer does not recognize this app. Every time I try to open it I get "the application failed to initialize properly (0xc0000135)." what the Hell does that mean?
Click to expand...
Click to collapse
Hmmm, odd. I even redownloaded the app that I posted, unzipped it, and reinstalled it and it worked fine. You are unzipping the file first, and then trying to run the application right? Maybe whatever you are using to unzip could be corrupt. Try winrar or winzip to unzip it.
Oh, you aren't trying to install this on your phone are you? You install this on your computer and run it there, not your phone.
tdial only works if your dialer is the HTC touch dialer that comes with some roms. The default TMo rom doesn't have it. If you want to customize it with tdial, you need to first have HTC touch dialer installed.
hi
Im basically developing this titanium modification, it's already finalized and ready for cab'ing....ive tryed CE Cab manager, quikcab and they both succesfully build the cab perfect but when i go to install it i get the "installation has been unsuccesful because it is not digitally signed with a trusted certificate".....so how do I "sign" a cab?...ive installed sdcerts, ive tryed editing the xml/INF files and still no luck..ive tryed googled, looked thru the forums, n nothing....any ideas? ive attached the cab too
THNX!
usually it's sufficient to install sdkcerts followed by soft reset. however the original certificates expired on 31/12/09 so you need to make sure your sdkcerts contains the new certificates from 2010. I personally don't know about an updated sdkcerts and I installed the new certificates manually. they are available from microsoft. developers.windowsphone.com I think. and make sure to first remove ALL of the old ones, otherwise it won't work.
Download the new certificates here: http://htcpedia.com/news/new-certificates-out-for-windows-mobile-developers.html
Is there a cab with these updated certificates anywhere?
well i signed the two files that needed to be signed so you should be good to go on the install...also here is the signer program to do so in the future...
I have msigner with the updated certificates. The problem I am running into is in getting the certificates on my phone. I have tried to install manually, I have tried to delete and reinstall. But when I move a signed file to my phone it is not recognized. The sdkcerts file appears to have the certificates that expired 12/31/2009.
I have searched high and low, asked just about everywhere and cannot find a cab for the new certificates.
bboyle said:
I have msigner with the updated certificates. The problem I am running into is in getting the certificates on my phone. I have tried to install manually, I have tried to delete and reinstall. But when I move a signed file to my phone it is not recognized. The sdkcerts file appears to have the certificates that expired 12/31/2009.
I have searched high and low, asked just about everywhere and cannot find a cab for the new certificates.
Click to expand...
Click to collapse
Here ya go
jdmsleepr said:
well i signed the two files that needed to be signed so you should be good to go on the install...also here is the signer program to do so in the future...
Click to expand...
Click to collapse
WOW...you dont understand....THANK YOU!!!!!!!!!!!!!!!!!SO MUCH....like really thank you...
NilsP; said:
Here ya go
Click to expand...
Click to collapse
Thanks NilsP, i'll try this later today.
Double thanks, this works.
Doesn't one need a package called no cert also ?
Not sure what "no cert" is. unsigner works on most files. I have found a couple of dll's off of my Imagio that are not affected by unsigner though.