Registry setting for JASJAR after ROM update - JASJAR, XDA Exec, MDA Pro General

I have just installed the new English ROM on my JASJAR, without any problems. However, when re-installing all my apps, WM5 asks me whether I want to allow the unsigned app from installing for everything.
Can somebody please tell me where to find a registry setting to disable this, otherwise I am going to be crazy by the end of the day!
:roll:

[HKLM\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1
Do a soft reset.

Thank you very much
Now that installing Calligrapher 8.0 to my SD card caused the phone to refuse to boot, I'm going to have to start all over again ... :x

This hack also solves the "VGA Brute force not working after the update" problem...

Related

Help with trusted certificates on WM5?

Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!
Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.
Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!
I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one
really! which software could i use to reboot the phone??
also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?
yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.
What software did you use or could i use to reboot my ppc chuckchuck?

Disable unsigned app warning

How do I disable the warning about unsigned applications? I know there's a registry key somewhere but I can't find it anywhere in the wiki or forums.
Thanks.
Best use nicos easy tweaker works a treat!
http://forum.xda-developers.com/viewtopic.php?t=39725
I get an error on my wizard for some reason, and the last time I tried to use it is screwed my WiFi up. Does anyone know which registry key it changes?
To disable the security warning when installing a non-certfied application, set:
HKLM\Security\Policies\Policies\0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM\Security\Policies\Policies\0000101a = 0 (DWORD decimal)
This key is NOT for installing. It's for running an application.
Can someone please post which key controls the install warning for unsigned cab files??
Thanks!
The 2.17 basic rom on the ftp site must include a cab that changes the correct registry key to disable the installation warning.
All other roms I've tried out warn me when installing cabs, 2.17 does not.
I really need to find out which key controls this, so I can turn it back on using 2.17
As I stated before, the above mentioned registry key does not en/disable installation warnings (when you try to install a cab that's not signed), it only en/disables running warnings (when you try to run an application that's not signed).
Anyone know the correct key???
Thanks in advance!
jberylec said:
The 2.17 basic rom on the ftp site must include a cab that changes the correct registry key to disable the installation warning.
All other roms I've tried out warn me when installing cabs, 2.17 does not.
I really need to find out which key controls this, so I can turn it back on using 2.17
As I stated before, the above mentioned registry key does not en/disable installation warnings (when you try to install a cab that's not signed), it only en/disables running warnings (when you try to run an application that's not signed).
Anyone know the correct key???
Thanks in advance!
Click to expand...
Click to collapse
The above key is the correct key - it both warns on installation and execution of a non-signed app. If you have previously installed a cab and answered yes when installing then next time you come to installing it the pop-up will not appear. This worked on my device - qtek 2.17 rom - when i set the key to 0, the warning on installation and running of non-signed apps came back.
This cab disables the warnings, but I think it only edits the registry in the way that was already mentioned here.
Trust me, I've reflased my 8125 and reinstalled all my apps enough times now to know that the install warning and the run warning are separate.
I've now reflashed roms specifically to test this registry key mentioned above, and it only changes the warning when running an app.
Using ROM 2.17 basic, changing this key only affects the warning when running an app. It changes nothing about installing cabs.
Changing this key back to default only affects running apps, not installing them.
Again, I have reflashed many times now specifically testing this key change for both scenerios.
Still searching online for the other key...
2.17 basic has the install warning key AND the running warning key both disabled - but I still cant find where the install key is!
I really would like to find this because I want the security of apps not being to install themselves! But I do not want to deal with being prompted every time I to run a program.
I want:
Cab Install Warning: ON
App Init Warning: OFF
Several of the ROMS here are set up like this (Including 1.08 ship). But 2.17 basic is not. It has both warnings disabled
The key above is correct - at least on my device (UK Orange M600). Before setting, I could not install an app (MemMaid) because it was not digitally signed (not a warning - wouldn't let me install at all). I set the key to 1, and it now installs fine.
I guess there must be something else going on on your device... is it locked in some other way to limit intalls?
Sorry that's not a solution, but hope it helps narrow things down for you.

Will hard-reset fix this ?

Hi,
I have a T-Mobile MDA Compact III (aka HTC Hero) and I was trying to change some things in registry, also I owerwrited some dll witch had attribute ROM (using sktools). Now I have ppc with not working camera unfortunately. Will hard-reset fix my problem ? Will it give me correct registry and also all device dll to default settings ?
Yes, a hard reset will restore your device to the way it was when you first got it. It's like formatting your PC hard disk and re-installing Windows.
Hard-reset didn't fix
Hi,
I have the same problem. When I start up the camera I get the message, the camer couldn't initialize. I have SKtools installed. Hopefully someone has an idea.
as said above.press reset hole &2soft keys ("-")together then "yes-green bttn".or somewhere in settings is'Clear Storage'. btw, backup ur contacts... before
premnik said:
Hi,
I have a T-Mobile MDA Compact III (aka HTC Hero) and I was trying to change some things in registry, also I owerwrited some dll witch had attribute ROM (using sktools). Now I have ppc with not working camera unfortunately. Will hard-reset fix my problem ? Will it give me correct registry and also all device dll to default settings ?
Click to expand...
Click to collapse
The golden rule to avoid having to hard reset is to always backup your phone before starting to mess around with the registry, that way you can undo any mistakes you've made.
I think that SKTools backs up the registry before deleting or changing some value so you may want to check up on that before hard resetting.

[B]xHelp how do i I unlock "Sufficient System Permissions" [/B]

Hi,
I have a cingular 8525 with the default cingular ROM ( will change it later want to wait a litle while)
I am trying to install a Cab and i get this notification:
the installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions
I know this is a simple registry hack and i seen a couple but I have not seen anything specific to hermes.
Please give me a link to directions
Thank You
Here... Install this CAB to the phone
This did not help
I installed the Remove Security Cab and it installed with no problem, but when i try to install: CommButton-Toggle-Vibrate-Fix.CAB
I still get the same notification.
Thanks
Did more searching still cant solve it
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
medmenz said:
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
Click to expand...
Click to collapse
Purely on the point of running processes - these will not show up in programmes in memory (except in very broad terms). An application such as sktools will show running processes.
(I am not saying this will solve your problem though)
Mike
ok i will try getting a prog and stoping more stuff to see if i can install?
Any other sugestions?
Tried using SKtools to stop everyhing possible still cant install the CommButton-Toggle-Vibrate-Fix.CAB
Is there anyone out there that knows how to fix this problem???
Please Help
thanks
Is there a way maybe to instead of installing this cab file to do it manualy??
Can I somehow modify registry to do the same as this cab is doing?
thanks
As a general rule, if I have an "unstoppable" process, I power cycle the phone and then execute the cab without opening ANYTHING else (like the comm manager in this case). Give it a shot.
I just tried that turning it off and on and trying to install, also doing soft reset and trying to install. Nothing works as soon as I click on it in a second i get "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Please tell me what else I can try??
Finaly got what I wanted
I never got the stupid cab to install, but I found a different cab which let you assign vibrate to anything ( http://www.8525software.com/)utilities so when i hold PTT button it switches to Vibrate
Thanks for all that tried to help me.

HELP Netcf 3.5 Installation failed

Hello,
i have a massive problem with my htc hd2. In order to use bsb tweaks 1.6 and other software i need netcf 3.5. The problem ist, that every time i try to install netcf3.5 wether via .cab or active sync using the pc programm it says "installation failed". When i install BSB Tewaks it installs and says that it can´t run with that version of netcf. Obviuously there seems to be an older version installed which hinders the new one from installing. This problem occurs even after rom update and hard reset. I ran out of idears and am totally despaired.
If someone can help me with that i´d be more than thankfull because i tryied everythin from sk tools cleaning registry after rom installation to taking out the memory card and Sim card and so on..
HELP PLEASE (
Lovrock said:
Hello,
i have a massive problem with my htc hd2. In order to use bsb tweaks 1.6 and other software i need netcf 3.5. The problem ist, that every time i try to install netcf3.5 wether via .cab or active sync using the pc programm it says "installation failed". When i install BSB Tewaks it installs and says that it can´t run with that version of netcf. Obviuously there seems to be an older version installed which hinders the new one from installing. This problem occurs even after rom update and hard reset. I ran out of idears and am totally despaired.
If someone can help me with that i´d be more than thankfull because i tryied everythin from sk tools cleaning registry after rom installation to taking out the memory card and Sim card and so on..
HELP PLEASE (
Click to expand...
Click to collapse
you have to use a reg editor to enable the 3.5. HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
see if this helps
**** turpin said:
you have to use a reg editor to enable the 3.5. HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
see if this helps
Click to expand...
Click to collapse
That is for software that was installed on the phone prior to .Net 3.5. It has nothing to do with installing 3.5.
If you can bare it, I'd suggest a hard reset and then try to install it. It should install without issue, as it has for everyone else as I've never seen this problem.
There could be a conflict with something that you've already installed on the phone, but it certainly won't be with an earlier version of .Net. You can (and indeed need to) have different versions of .Net working on the phone.
Let us know how you get on.
johncmolyneux said:
That is for software that was installed on the phone prior to .Net 3.5. It has nothing to do with installing 3.5.
If you can bare it, I'd suggest a hard reset and then try to install it. It should install without issue, as it has for everyone else as I've never seen this problem.
There could be a conflict with something that you've already installed on the phone, but it certainly won't be with an earlier version of .Net. You can (and indeed need to) have different versions of .Net working on the phone.
Let us know how you get on.
Click to expand...
Click to collapse
I performed a hardreset first via Software "1234" then via buttons (volup/down) but every time i try to install it, it says "Microsoft.NET CE 3.5CAB failed" and thats it....
What can i do ? It actually has worked at a certain point but after some hardresets it just doesnt install anymore (
Have you tried a different download? It may be that the installation you downloaded is corrupted. Also, if you're copying it to your SD card and installing from there, that could be damaged, so try it from the device.
Other than that, I really don't know what to suggest. I take it you've googled the error message you get. What did that give you?
Netcf3.5.9198
When I tried to install NETCF3.5 it told me I had a newer version already installed, so I didn't install it. Later I checked my registry and found that I have version 3.5.9198 installed. Does anyone know if BsB Tweaks will work with this version? (EDIT) Well, I tried BSB Tweaks and it seems to work ok with my version of NETCF3.5.
When I tried pinch to zoom on Opera 10, it worked, but also gave a small popup showing the image of the full screen centered on the lower center part of the screen. When ever you double tap to go back to full screen, the little popup disappears. ????

Categories

Resources