help
I have tried to download some softwares that I need, I use my Download Accelerator to help it, a week ago its succed,but now each time I tried its become error "site disconnected us when beginning"
can someone help me
It's likely that the site you're connecting to is the culprit. Nonetheless, you might want to ensure that your settings are still correct. Did you make any changes to your PPC in the week between the time when it worked and the present?
Related
Ok found ICSinstall.cab on here and installed it, soft reset, and attempted to install the latest version of the WMWifiRouter program (which I finally succeeded in sourcing!).
However I get a message telling me cryptically that it 'cannot be installed' after attempting install. I wonder if this is related to ICS...
I now have the InShrUI.exe file in /windows/ *but* attempting to run it gives:
'The file 'IntShrUI' cannot be opened. Either it is not signed with a trusted certificate or one of it's components cannot be found. You might need to reinstall or restore this file.'
I reinstalled it over itself (i.e. ran the cab again) same error.
:-/
Was this the right file? I seem to remember it was dated 11th January 2008??
Thanks again for hte help folks!
I should say I'm running Microsoft Windows Mobile Version 5.0 (OS5.1.195 (build 14955.2.3.0).
Lastly I should say I've started a new topic as the last one was getting a bit off topic my original concern having been answered :-D (thanks guys!)
probably you only opened a shortcut (*.ink) and the shortcut pointed to a not existing file. Another thing is that it also was intsalled correctly (the *.exe), but the dll's or whatever are not installed.
Regards
Thanks. I'll try redownloading and repeating.
I was wondering if the file needed signed with some unique private key or something?
Anyways will give it a shot and report back
softonic123 said:
probably you only opened a shortcut (*.ink) and the shortcut pointed to a not existing file. Another thing is that it also was intsalled correctly (the *.exe), but the dll's or whatever are not installed.
Regards
Click to expand...
Click to collapse
Thanks for your suggestion I'm now a tiny bit further on.
On soft resetting the PPC I get the following error:
'Pocket PC Networking
Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network settings.'
InShrUI is still giving the same error as before (and it's definately the .exe file I'm clicking).
However the improvement is: This time WMWifiRouter succeeded in installing...
However the same PPC networking error occurred during the install. I could probably tweak whatever is causing that error to use a static IP address rather than DHCP probably...but it's kind of dodging the problem.
And as said before I can't launch IntShrUI without getting that error. This time there is a shortcut to it though in program files.
I should also say that neither the executable or the shortcut has an Icon Image (i.e. it's the default no icon blank) so I suppose it might be the .exe file that's corrupt (since the shortcut get's it's icon from there I think?).
Last but not least:
WMWifiRouter reads:
Code:
'Not Connected'
Waiting for connection
I suspect the problem must lie with InShrUI but then again I'm a noob so I'll wait for the XDA gods to come and share their wisdom!
MrVarioII said:
Thanks for your suggestion I'm now a tiny bit further on.
On soft resetting the PPC I get the following error:
'Pocket PC Networking
Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network settings.'
InShrUI is still giving the same error as before (and it's definately the .exe file I'm clicking).
However the improvement is: This time WMWifiRouter succeeded in installing...
However the same PPC networking error occurred during the install. I could probably tweak whatever is causing that error to use a static IP address rather than DHCP probably...but it's kind of dodging the problem.
And as said before I can't launch IntShrUI without getting that error. This time there is a shortcut to it though in program files.
I should also say that neither the executable or the shortcut has an Icon Image (i.e. it's the default no icon blank) so I suppose it might be the .exe file that's corrupt (since the shortcut get's it's icon from there I think?).
Last but not least:
WMWifiRouter reads:
Code:
'Not Connected'
Waiting for connection
I suspect the problem must lie with InShrUI but then again I'm a noob so I'll wait for the XDA gods to come and share their wisdom!
Click to expand...
Click to collapse
Is there no1 who can answer this? Anyone got any ideas?
Device is a hermes (T-mobile Vario-II) running WM5.....
There's one MAN point up for grabs for whoever can solve it!
I tried installing WMWifiRouter 0.89 onto a ROM which didn't have ICS included (which meant I had to try the same route you did) onto my Vario 2... I just couldn't get it to work, and I spent a while trying to make it work too.
I'm figuring that there's some deep-seated DLL or system association which ICS needs, which isn't configured if ICS is stripped out of the ROM - I ended up just reflashing with another ROM (the T-Mobile WM6.0 official ROM) and ICS and WMWifiRouter works fine.
Sorry that's not a solution, but it's the only way I could get it to work. Not an expert ROM cooker, so my knowledge of how ICS is stripped / included in ROMs is fairly limited, though I understand the concepts and techniques.
Thanks for your help Christopher.
I considered flashing a working ROM. My worry is about losing all the programs I have installed on the device (it took a long time to get it *this* customised ;-) ) is there any way to flash the new ROM while keeping the old registry entries etc. for registering my programs (Especially those I've bought such as Oxford Handbook of Clinical Medicine - which I cannot register anymore)? ...
Or could I somehow back up the registry and restore it later (I know that's likely to be a dangerous idea...perhaps simply the file associations and programs stuff -the windows mobile section?)
Thanks bro!
MrVarioII said:
Thanks for your help Christopher.
I considered flashing a working ROM. My worry is about losing all the programs I have installed on the device (it took a long time to get it *this* customised ;-) ) is there any way to flash the new ROM while keeping the old registry entries etc. for registering my programs (Especially those I've bought such as Oxford Handbook of Clinical Medicine - which I cannot register anymore)? ...
Or could I somehow back up the registry and restore it later (I know that's likely to be a dangerous idea...perhaps simply the file associations and programs stuff -the windows mobile section?)
Thanks bro!
Click to expand...
Click to collapse
Bumping as no replies for ages
Anyone?
Bumping again as no replies for a week or so
Bumping again to ask if anyone knows a way of slving this without having to reinstall all my programs, re register them, and reconfigure everything? (which I suspect installing a different ROM will do?) is it possible to back up the registry entries for all of my programs then do the ROM upgrade and restore the registry entries from my other programsMost of my programs are installed on the microSD card anyway (i didn't want to use up the main memory and slow the device up).??
If so how?
Thanks again folks !
I have the same problem...
I cant seem to find the answer but will continue to try.
if your programs are installed on your memory card then chances are you should be able to past shortcuts into the programs directory after reflashing. I tend to do this BUT I have found some programs that need to be re-installed or re-registered. Backing up registries can cause SERIOUS problems in itself so I would 1st do a full backup of your system (try spb backup, it backs up EVERYTHING on the phone then re-installs the lot so it seems like you never had a problem..) then flash. Try putting on shortcuts and if you have no luck you have the choice to start again on the new os or reflash to old and then restore backup (old problems wil still be there). Hope this helps.
Ps. I use resco explorer instead of the crap file explorer on the phone. It allows MUCH more versatility to do as I want. Cheers....
Hello,
I just installed my frist ROM on my Tmobile Wing. I'm pretty new to all of this and haven't done it before. There are a few things that I need to tinker with, but one of them I havne't been able to figure out. I assume that there is something I need to do to get the Data/Edge/Radio working, but I can't seem to figure it out. I have searched as much as I could, but still couldn't locate what needs to be done. When I try to connect to something that needs the edge, it give me a message from the top that says "Cannot connect with current connection settings. To change your settings, tap Settings."
Can anyone let me know what might need to be done?
Thanks for your help!!!
Oh and "ROM_HERALD_WWE_6.1_BUILD_20764.1.4.3" is the rom I installed
Nevermind. After finding it, i'm sure it would have frustrated you to tell another Noob. But after searching enough I found out the info
Run the network wizard if it has one on the rom. If not you can find a network wizard cab on this website somewhere. Its a easy fix.
Hi guys,
I did a hard reset 3 days ago, and ever since haven't been able to download/install marketplace. My internet connection is working fine and I've tried both with 3g and Wifi. It keeps giving me an error message saying "There maybe a problem with marketplace service right now. Check your connection and try again later."
Anybody knows anything about that? Is it really a problem with Marketplace or is it my phone? Any help would be appreciated
I did even download the cab file from the internet, but when trying to install that one it says "Installation as unsuccessful. The Program can#t be installed because it does not have sufficient system permissions".!!
Thanks,
Hallaj
I did a hardreset too, and since then I can't get anything from Windows Marketplace either...
Keeps telling me that it can't logon to the Windows Marketplace servers, and that I should try again in a few seconds...
Also tried the regedit with no luck...
Any help would be appriciated greatly!
Stock danish ROM 1.66
Thanks in advance.
Hallaj85 said:
Hi guys,
I did a hard reset 3 days ago, and ever since haven't been able to download/install marketplace. My internet connection is working fine and I've tried both with 3g and Wifi. It keeps giving me an error message saying "There maybe a problem with marketplace service right now. Check your connection and try again later."
Anybody knows anything about that? Is it really a problem with Marketplace or is it my phone? Any help would be appreciated
I did even download the cab file from the internet, but when trying to install that one it says "Installation as unsuccessful. The Program can#t be installed because it does not have sufficient system permissions".!!
Thanks,
Hallaj
Click to expand...
Click to collapse
adjust date and time to your region and it will work ,happened to me
hoss_n2 said:
adjust date and time to your region and it will work ,happened to me
Click to expand...
Click to collapse
Worked for me once, updating the FaceBook app...
But after the reset, it didn't work anymore.
Tried applying the same changes as before, but no luck.
I then disabled the "use network ressources to adjust time/local" option, and now it works as it's supposed to.
Since when have the auto-time-update been an issue?
First problem i have, whenever i try to use the windows update i get the following message:
Connection to update server was not available. Check our data connection settings and ensure the device date and time are correct.
Click to expand...
Click to collapse
Date & time is correct, mobile connects to websites ok so i dont see why it wont connect?
while googling this, i found theres a ROM upgrade for the phone aswell, do i need it? the phones 6months old and has ROM version 1.56.405.1
The main reason im wanting to use windows update is because i've tried to install a couple of apps and it tells me i need an upgraded .net framework, is there any other way to do this? and how can i find the latest version?
thanks if anyone can help.
dont waste your time...
in short ,dont waste your time with windows update,it is not used ,at all.
windows update (according to interviews on FACEBOOK..windows mobile, with relevant persons from MICROSOFT.....) is only for very crictical updates and they have never used it ,(as far as i know...?)
best is to navigate to htc website ....
http://www.htc.com/mea-en/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
..make sure to select your country ..top right of webpage ,
note, above link i provided... is for htc middle east and africa...and upgrades might not be applicable to your country...!!!!
the .net issue is seperate issue..has got nothing to do with upgrade..!!..
it is used for certain applications to function...
, google for ..something like ...."netcf 3.5 download "....or/
try this link and make sure it is what you are looking for.....!!!!!
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
follow link..it will take you to microsoft web page (dont worry, it is a free applications ) ,but be aware ,the application is about 33 megabytes,and download it to your pc.
afterwards , you have to connect phone to pc and install from pc.to phone..reboot phone and you application should work.?
( do not try and install from phone ,it wont work )
good luck
willcor
From what I can see you already currently have the latest ROM upgrade that is also available via HTC's website, so there is no need for you to download and install it again. At the time, the ROM was released to improve the overall functionality of the phone and fix some existing issues with it.
Here is what the ROM upgrade contained:
Improved Functions and Fixes
1. Updated the Connection Setup Database.
2. Improved emergency call connections while using Airplane Mode.
3. The GPS position updating speed has been enhanced.
4. A Title bar display flicker in TouchFLO 3D has been corrected.
5. Fixed multiple browsing issues.
Go to this link, and download and install the NETCFv35.Messages.EN.wm.cab to your device. After you installed NETCFv35.wm.armv4i.cab, reset your phone.
thanks alot guys, appretiated
Since installing this, im getting quite a few error reports
"A problem has occured with... please tell microsoft about this program"
Reflashing the rom might help.
lemzip said:
Since installing this, im getting quite a few error reports
"A problem has occured with... please tell microsoft about this program"
Click to expand...
Click to collapse
In that case, (if i was in your shoes) i would try to hard reset first then install the .NET cab first and then any other programs you want afterwards. Then hopefully those nasty errors will disappear
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
drehustler said:
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
Click to expand...
Click to collapse
Yeah it sounds like you had CF 3.5 on there before but somehow it didn't stay after the hard reset (which indicates it was installed sometime after the phone was first purchased).
The file you downloaded is to install it from your PC, not the phone. Put the cab file I attached here on your phone, run that, and it should resolve the issue
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
run this from your computer. http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
drehustler said:
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
Click to expand...
Click to collapse
Hmmm no, never heard of it, and basic searching turns up nothing but lists of odd HTTP error codes, that one included. My guess would be an issue with your browser on your PC, but I really couldn't say for sure.
You can also just run the file Rhodium500 linked to above, it's the same .msi file you put on your phone in the first place but couldn't get to run from there...it's an automated installer that just handles everything from your PC instead of you putting the cab on the phone manually.
thanks alot guys, still have no luck and since my phone is under warranty, i'm gonna get a new one. I got 2 htc tilt 2's and only mine is doing this? i'll be back.
dude getting a new touchpro2 wont help... i dont think... like the guy who posted the attachment said, just install it and it should work. if u cant download it use your friend's computer or the library
Dude I had the same problem and if you wait a few mins Ill find it in the microsoft website so you can try downloading from there. Just run it on your computer, then connect your phone with active sync. Go to programs> More> Add/Remove programs and click on the little box there. (I am not sure if the menu goes like this, im actually sure that it doesnt, but for some reason my phone wont connect the WMDM right now so i cant tell u) anyway dont return the phone just because of that cuz the new one might have a problem thats actually harder to fix
I dont remember where I got it from but Ill try to find the original place where I found it.
Heres the file
Microsoft Website
You can download it straight from their website. Its free and it doesnt hurt
thanks, just tried it and had no luck?? i can't even return my phone until the 12th so i'm still trying to figure it out.
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
drehustler said:
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
Click to expand...
Click to collapse
Just a hint; it seems that either resetting the device or ActiveSync seems to solve a lot of problems sometimes. Had the same that my device didn't want to accept new Exchange-settings I made on my PC. After resetting both, it worked flawlessly.