Is it only me, or does the inbuilt Caller ID app that HTC provides suck rather large rocks?
My ROM is pretty recent (unlocked 1.12 WWE), and the Caller ID says it is version 1.20 (Build 18567), but I have the following problems with it:
- Very slow to load my 200 contacts
- Very difficult to find a contact. Click one of the short-cut letter combinations at the top, and it seems to go to a random contact
- Type in a letter/combination, and it finds that letter/combination in every contact (ie RE gives me fREd), rather than using that as the first two letters in a name
- Overall very slow and sluggish to respond to anything. It would be quicker to call Directory Enquiries and then type the letters in using my toes
- Unless I start it (and its running in the background), I don't get any of the PhotoID on ringing functionality
- Setting the font size of the incoming call has no effect - the name still comes up in microscopically small font.
Any suggestions? Shall I unmap the contacts button and use the default Microsoft contacts manager (without any of the cool pictures/ringtones functionality), or is there an update or an alternative?
Thanks, guys
Alex
I've some issues with it as well.
When I try to change the storage path for photoid files, my CallerID keeps crashing.
Is there a registry location where I can change this? I've tried finding it in the registry but I failed at it
I gave up on the HTC version it really is slow, bug ridden and generally crap.
Try Photo contacts instead, its fast, easy to set-up and doesn't alter contacts when you attach pictures as instead of being attached they are simply referenced by the name you store the contact under.
E.g. If your contact is Joe Bloggs then the contact picture is bloggs,joe and it will display full screen too!!!!!
It's slow and buggy memory hug and has ****ty functionality. Don't install this (ie. by preventing from customization) unless you are planning to use ArcSoft MMS 2.5.
I agree its slow but never found a bug with it (until now with the GPRS problem).
Its the best photo contacts software I have seen for the imate and good for when you're in the car with its full screen id and large display of contacts to dial.
Unless you know of another program which is better?
I did just find this, it's pretty cool, I like the fat-finger only use....
http://www.sygic.com/mobile/phoneedition/
madinga said:
I did just find this, it's pretty cool, I like the fat-finger only use....
http://www.sygic.com/mobile/phoneedition/
Click to expand...
Click to collapse
So I thought this was pretty interesting. I installed this software today and overall I really like it until the first time I try to sync and I get the old "Unable to connect..." error message. This is the first time I have gotten this message in over a month since doing the downgrade but it is also the first time since then I have installed a prgram that was some sort of contact/caller ID related software.
I uninstalled this program and it seems the error message has gone away..... wierd
nothing better than this : http://www.pocketx.net/products/photocontactspro_ppc/#photocallerid
Tried every program that is related to photo contact and photo dialing. And I came to one conclusion, they all suck.
There is really no program that doesn't slow your ppc down or give an error of somekind...
Uninstall HTC Caller ID
Does anyone know how to uninstall HTC caller ID. When I go into remove programs on my PPC, HTC Caller ID is not listed. I installed it from a cab file that I downloaded here! Any help would be greatly appreciated.
Thanks
Uninstall HTC Caller ID
Does anyone know how to uninstall HTC caller ID. When I go into remove programs on my PPC, HTC Caller ID is not listed. I installed it from a cab file that I downloaded here! Any help would be greatly appreciated.
Thanks
to fut*
I don't know to uninstall it but there is a way not to install it, but you have to do a hard reset. See instructions here http://pocketpcdubai.infopop.cc/groupee/forums/a/tpc/f/582600994/m/237102159/r/237102159#237102159
Question for Jarek
Why should you use PhotoContacts if you use ArcSoft MMS 2.5?
I also don't like the PhotoContacts prog but don't want to spoil anything else.
Thanks
Re: Uninstall HTC Caller ID
futsoulja said:
Does anyone know how to uninstall HTC caller ID. When I go into remove programs on my PPC, HTC Caller ID is not listed. I installed it from a cab file that I downloaded here! Any help would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
1. delete the IA_CID_Startup shortcut file from the \windows\startup directory
2. delete the IA_CID_Startup from the \windows dir.
I think the Caller ID function of this program is decent, but there is no way to backup/restore your photo/ringtone assignments which really sucks. So after every hard reset you have to do it all over again..... :evil:
After I came to this forum and so tired of the htc caller ID I decided to give a try to photo contact as bruxelles5 suggested, and I have to confess that it did impressed me. It was been working perfectly, photos stored in sd card so after hard reset I don't have to set it up again, full screen image and picture arrangement. Very good *****
PS: I got rid of caller ID with anansky method and got 27 mgs store!
Photo Contacts bug?
Does anyone else have a bug in Photo Contacts Pro like me: I have to pick up the phone useing touchsceen button otherwise (with hardware button) both me and caller(!!!) hear nasty "fragmented" end of ringtone wich rings (ca 1 sec) AFTER pressing the button
It doesn't seem to depend on location of ringtones folder (main memory, storage card)...
BTW, all the ringtones are in wma-format. Should I try another format?
Any thoughts?
PS Sorry for my English
SOLVED: Mort, thank you very much for your MortRing!!!
I have this problem as well with the ring tone blasting into the caller's ears when using the hardware button to answer. Do you mind sharing what you did to solve that?
How can you choose which of the caller ID apps opens when a call comes in?
marsonist said:
I have this problem as well with the ring tone blasting into the caller's ears when using the hardware button to answer. Do you mind sharing what you did to solve that?
Click to expand...
Click to collapse
Just try this s/w http://forum.xda-developers.com/viewtopic.php?t=20711&highlight=mortring
I'm happy with MortRing as I don't need Photo ID on my phone but I like to assign individual ringtones very much
It is unbelievable that HTC ships products with this crap. Even a cheap cellphone has better Caller ID functionality. Not only is the program very slow when editing, you can't backup/restore your ringtone/photo assignments. Caller ID doesn't work 50% of the time, and after a lot of troubleshooting, I have not reached a firm conclusion as to why. The only credible explanation I found was in the XDA-developers forum and it simply seems that unless you have plenty of free resourses the program won't work. And still, I have an upgraded Jam (128 MB).
This is very very sad. I miss the solid performance of my iPaq.
Related
Attached is an early alpha version of D9, a replacement for the built-in dialler. The main features are:
* Predictive text contact lookup
* Fast
* Big (thumb-friendly) buttons
* Free
Source code, a website and various other bits and pieces will be arriving in due course. In the meantime, however, please do feel free to try it out and give it a go.
I'm looking for feedback, so please let me know what you think!
I think it's a very good start. The application, as you said, takes 2-3 seconds to start the first time, but it's not a big problem. It is very quick for finding contacts. Buttons are big enough and the use of vibra very useful.
Here is some features that could be useful in my point of view:
- Possibility to have contacts sorted by the Outlook field 'View as' (or 'Save as' or 'Fill as'. Don't know what MS translated into 'Classer sous').
- Or if not possible, sorting (finding) contacts by company, name and firstname.
- Clear the previous search automatically when the application comes to the foreground.
- Option to switch to internal dialer once the contact has been dialed.
- Highlight the found string in the contact name (this is nice to have more than really useful).
Hope it helps. I look forward to next version.
Thanks for the great suggestions. I'll see what I can do!
Hi Mike,
I was looking for something with a big "exit" button like this one, so I did a try to it.
Unfortunely my XDA II gives me an error every time I tap the screen when the program and library was installed on SD card.
When installed on main memory it was fine making calls but when I got an incoming call the built-in dialler was the one coming up to the screen.
The main problem for me is that I don't want to play with the penn while driving after I got a call to close the dialler screen and I need it closed to see the TomTom Navigator.
Mostly of you drive a car, I do a motorbike, so it's not very funny to try to hit the small "X" with a small penn and big gloves.
I will look for a new version.
Jose Adell
Unfortunely my XDA II gives me an error every time I tap the screen when the program and library was installed on SD card.
Click to expand...
Click to collapse
Hi Jose,
Sorry, I don't have an XDA II myself - I've only tested on my JAM. Could you tell me what the error message is?
Hi Mike
Mike Wagstaff said:
Unfortunely my XDA II gives me an error every time I tap the screen when the program and library was installed on SD card.
Click to expand...
Click to collapse
Hi Jose,
Sorry, I don't have an XDA II myself - I've only tested on my JAM. Could you tell me what the error message is?
Click to expand...
Click to collapse
I will do tomorrow as I need to install it again on the SD card, but I think you don't need worry too much about it. It's typical to get some errors, like libraries (dll, ocx...) are not installed when it's done on SD cards.
But the main problem for me still remains, to get the incoming calls through your program. Currently is the buil-in the one comes up.
See you tomorrow,
Jose
Hi Mike
I did install again your program on the SD card and this is the error I get as far I tap the screen:
I suppose you don't understand Spanish so I'll do a translation:
"Unexpected error in D9.exe. Tap Salir (Exit) and reinitialize the program or tap Detalles (Details) to get more information".
If you tap Details then a new similar screen comes up and says:
"D9.exe
TypeLoadException"
As I said in my former message, all this doesn't happen if the program is installed in the Default folder.
Hope it helps.
Jose Adell
Hi Mike,
installed your program with no problems at all.
I have a Qtek 2020 with 1.72 WWE installed.
Works OK and finds the contacts correctly, by first or by last name.
It is a simple, thus easy to use and load program.
The only thing to point out is that I would prefer a slightly larger font on the number and name display, making it more 'readable' when on the move, e.g. car, where I will be more likelly to use it.
regards,
george
Hi Mike,
I have been waiting for an update to your great program. Is it possible that it could be mapped to the Send/End keys? Maybe you and Maimaich could get together on this?
I also agree with the previous posts to enlarge the contact name font. And I miss the speed dial option from your previous version (which does work on WM2003). Keep up the good work.
Feature wanted
It would be nice if I could navigate the buttons on the screen using the D-pad. With this, I can then write sms without the need to press on the screen and leave my messy fingerprints on it. :lol:
Mike Wagstaff said:
Attached is an early alpha version of D9, a replacement for the built-in dialler.
[skipped]
I'm looking for feedback, so please let me know what you think!
Click to expand...
Click to collapse
Thank you for your job. It looks much better on my MDA Compact. I even think about using it in replacement of the built-in dialer would it dial DTMF tones in the line. This is the worst thing that stops me from using it :-(
As minor features I'd like to see more large and contrast phone number, no vibra but sound when touching screen buttons, ability to map this program to the MDA's buttons on-hook and off-hook. Also I guess this is not a good idea to press "Clear" to start the new history for the phone number.
Sorry for the mostly negative commens - I wish the program become a real replacement for the standard dialer.
Yes great app, but the lack of tones doesn't make it easy to manage the message box on the Orange answering machine.
international characters
i'm going to try this new version. i have done simple app for previous version of D9 that converts all international chars (codepage cp1250) to ascii and change order of firstname and lastname to lastname firstname. there is source code avalable so i can add this feature if not avail and i'll share it. i like so much previous version and i'll see this one tomorrow. i'm looking forward.
very nice tool ! I use it all the time now ! keep up the good work :lol:
Glad you like it!
I've made a webpage for D9, and also have posted up a version of the source code (it's actually slightly newer than the current binary, so think of it as a work in progress). The site can be found here:
http://www.pocketgamer.org/d9/
You can download the source code directly from here:
http://www.pocketgamer.org/d9/source.zip
Please feel free to use / adapt / improve the code as you wish! Note that I've used two external components, Poom .NET (for contacts operations) and OpenNET CF (dialling, vibrate functionality).
Any thoughts on adding the tones for voice mail operation ?
I'd love to! Does anyone know of any example code for generating the tones...?
The tones are called DTMF-tones:
A list with the frequencies can be found here:
http://www.zytrax.com/tech/telephony/dtmf_tones.htm
Made a new skin for D9 dialer
I Just made 1 skin for D9 dialer, in 2 variations, (look at dial and clear buttons).
Unzip to D9 directory, overwrite - yes.
hey cool app but how do i use the hax one on the right with the SMS,
ive been after a SMS app that did full screen vertical typing for a while.
will this one do it ?
I am experiencing problems with my Mp3 ringtones which have been assigned through photocontacts and are kept on my storage card.
For some reason it keeps defaulting back to the awful default ringtone, it cant be the size of the file because I have cut them down in size.
The thing is if I change it back and test it with a friend ringing me immediately then it works but if you leave it for a while the next time they ring it has defaulted back.
I keeping changing it back and it works for 10 minutes or so then defaults back to the original.
This is really annoying, has anyone else experienced these problems and been able to fix it?
thanks in advance.
i have this problem too.
Xda II Mini.. :?
Put your ringtones in \Storage instead of the card. The SD is too slow to start when the Magician is sleeping and the system can't find your ringtones.
Used to have this problem also. After keeping my tones in \Storage I've never had this problem again. I use WMA tones Stereo encoded at 96kbps.
bnycastro said:
Used to have this problem also. After keeping my tones in \Storage I've never had this problem again. I use WMA tones Stereo encoded at 96kbps.
Click to expand...
Click to collapse
I had this problem too...even if I have put the ringtones in Storage folder... I have solved the problem with downgrading the ROM from 1.06 to 1.03...but left the radio stack 1.05...now it works fine...the caller ID, but have some issues with answering the phone...
Lp Primoz
jonnie darko said:
I am experiencing problems with my Mp3 ringtones which have been assigned through photocontacts and are kept on my storage card.
For some reason it keeps defaulting back to the awful default ringtone, it cant be the size of the file because I have cut them down in size.
The thing is if I change it back and test it with a friend ringing me immediately then it works but if you leave it for a while the next time they ring it has defaulted back.
I keeping changing it back and it works for 10 minutes or so then defaults back to the original.
This is really annoying, has anyone else experienced these problems and been able to fix it?
thanks in advance.
Click to expand...
Click to collapse
I have the exact same problem with mynew XDA IIi, although it has a standard ringtone assigning feature. None of the solutions seems to work. Any help, I'm really getting very frustrated with this problem!!!!
I have the same problem but with regards to the photo in the caller ID. I resolved this problem by usiung the old version of the Photo Contact Application.
Mvmajorem said:
I have the same problem but with regards to the photo in the caller ID. I resolved this problem by usiung the old version of the Photo Contact Application.
Click to expand...
Click to collapse
Could you please be more specific wrt: "the Photo Contact Application". Where do I get it from, and how to install it on my XDA IIi?
I too have problem - for some reason the Caller ID app will not function at incoming call after a while. i've tried to determine if there is a specific app I'm using that is conflicting, but so far the results are inconclusive.
What also sucks about Photo Contacts is that there is no way to backup and restore your photo/ringtone assignments - this kind of software limitation is just not allowed in this century!
Mvmajorem said:
I have the same problem but with regards to the photo in the caller ID. I resolved this problem by usiung the old version of the Photo Contact Application.
Click to expand...
Click to collapse
Hi mates, after doing the BigStorage thingie to my mini, and flashing it to 1.11.00 WWE, I have caller ID issues too!!
sometimes i get my predefined photos, and sometimes i don't!! i even set a default for all incoming calls, and sometimes it doesnt show too..
Then, i found 1.12 Caller ID CAB and installed it. System complained that some files exists and cannot be over-written. I note down the names, delete the existing files manually, and then redo the CAB install, and it doesnt complain. but i still have issues with photos that sometimes doesnt appear.
So, in this case, which version of CallerId should i downgrade to??
does my above method to install 1.12's Caller ID applies when i downgrade the caller-id??
thnx!!
Have u got PocketMusic installed?
I had that problem with PocketMusic , when i've uninstalled it i solved.
codecode72 said:
Have u got PocketMusic installed?
I had that problem with PocketMusic , when i've uninstalled it i solved.
Click to expand...
Click to collapse
no pocket music. what i have for Today plugin is:
1) D25
2) TodayPlus
3) PhoneAlarm
my primary suspect is the BigStorage hack.. and the "new" 1.11.00 WWE ROM.
i need to know which old version of CallerID are you guys talking abt, so i can try and download it and test..
Ringtones
I also have the same problem. Unfortunately, i cannot link it to anything in particular as I have been tweaking mine since 2003SE was made available. I installed originally Sin's Rom and all worked fine, then I found out that the JoJo/Tonenailed release made a comparison between the two and found that they had a newer Caller ID.cab file and installed it.
Dunno if that is the cause, but I need to know what files need to be "renamed"/deleted in order to install back to the original cab file that was provided in Sins version, then I can tell if that is the cause.
Ring tones are also a problem, which I believe is related. However, I cannot change any ring tone at all, they all default to some dodgy one. Even if place .mid files into the ringtones directory, they dont get "recognised". I even open them manually, and say "set as ringtone" (which I think only copies to the existing ringtones directory), however this didnt work either.
So, in summary, if somebody can tell me the files to rename to install Sins caller id.cab file, I will find out if this is the cause or not.
My caller ID version (photo contacts) version is 1.20 (Build 18567)
Do you guys have a method to restore your ringtone/photo assignments after a hard reset or a ROM upgrade?
to swedbass
Yes! Just use photo contacts pro. Simply the best!
I have been using BigStorage hack on my 1.11 ROM and I can confirm that it has nothing to do with this hacked ROM. I experienced this problem previously when I had PocketMusic installed on my Mini. What I did to solve this problem was I unassociated all media files from my PocketMusic and use Resco File Explorer to associate those media files back to Media Player.
I also did a registry hack to point the ring tone folder to my Storage instead of the default Windows/Rings folder.
For your information, I am using Photo Contacts Pro as well.
Based on experience here is what I can contribute:
1) Place the ringtones in a local memory storage, maybe the Storage ROM or in Windows\Rings, avoid the avoid the SD card, it takes up time to initialize.
2) Use the old version of Photo Contacts, I was refered to use 1.20 as it had less issues with GPRS problems as well.
3) If you have third party applications playing MP3s, make sure it is registered. If you are using Pocket Music and you are still trying to use the Bundle which is not registered, the ringtones will stop or not work because the player is not initializing becasue it requires a serial or something.
4) Try to get the file association to WMP to play .wma files.
Hope this helps.
Hi all, does anyone know if it is possible to assign a different ringtone for different groups, like "VIP" or "family" is this possible, or is there a third party application that can do this?
Photo contact pro
http://www.pocketx.net/products/photocontactspro_ppc/
i was about to ask a similar question, however mine is that I would like to assign a different tone for some peoples SMS messages. I havent tried it yet but i dont think photo contact pro will do this ?? anyone know of another prog
maltloaf said:
i was about to ask a similar question, however mine is that I would like to assign a different tone for some peoples SMS messages. I havent tried it yet but i dont think photo contact pro will do this ?? anyone know of another prog
Click to expand...
Click to collapse
Thats a feature I am also looking for - but no luck so far. All the different programs that I found can do is:
1. Change ringtone per person/group
2. Full Screen Picture ID of caller
But none allows me to change the SMS tone per person/group. I am going to write to the authors of PhotoContacts PRO if they will add this feature to their program.
i just had a google and it appears 'Ringo mobile' may do it. I'm going to try it now and i'll report back.
http://www.electricpocket.com/products/ringo-mobile.html
maltloaf said:
i just had a google and it appears 'Ringo mobile' may do it. I'm going to try it now and i'll report back.
http://www.electricpocket.com/products/ringo-mobile.html
Click to expand...
Click to collapse
Cool! This sounds promising - let us know what you found out.
Couldn't wait - I gave it a try myself 8) So far it seems to work pretty well. At least I could test the ringtone part - all my friends are still sleeping so it'll be a while for my SMS Test :wink:
Nice thing is that I switched off the ringtone manager in Photocontacts PRO and Ringo takes that part now and Photocontacts shows the caller full screen picture. But I guess I will be getting rid of Photocontacts once Ringo performs solid and without problems, the tone is more important than a picture to me - or I need a lightweight fullscreen picture id program...
i gave it a shot too, i havent had a sms off anyone yet either but seemed to be able to set the tones per contact ok. My only worry is intergrating it with phonealarm, as that app takes over the tones too. I've set the default sms tone to 'system' in pA, hopefully that will let ringo take over.
So far I am really amazed by this Ringo Mobile. It works ( for ringtones ) like a charm. Hopefully my friends will be up soon so I can test out the SMS Part of it.
Now I really want to get rid of PhotoContacts PRO, since its such a memory monster - do you know of any other fullscreen picture ID caller software? AFAIR there is a freeware but I am not sure of its name
i just got my friend to text me and it works perfectly
Good news!
I got some mini-bad news though - there is a bug in Ringo - when a person calls you are not able to use the volume slider to turn of the ringtone. This bug is already reported in the yahoo group of ringo.
So hopefully this will be fixed soon since I don't want to hit the IGNORE button ( since the person calling then knows I ignored them ).
The official statement regarding this problem:
This is a side effect of Ringo Mobile volume being the system volume
not the ringer volume (although we respect the ringer volume at the
point of the notification). However we do intend to add this ringer
mute facility in a future release.
Click to expand...
Click to collapse
Just found out about another Ringtone/SMS Tone Tool - its really tiny and FREEWARE!
MortRING
http://www.sto-helit.de/modules/wmpdownloads/singlefile.php?cid=8&lid=66
Haven't tried it yet - but it does sound like it does the same thing as Ringo - but for free.
MortRing works great on my SPV M3000 Wish that I could hide the icon on the traybar though :roll:
I also hope that there will be support for sounds on SD-Card instead of on the device. That way I will be able to attach a SMS/ring tone to every contact and not just a few 8)
DREAMBOXER said:
Just found out about another Ringtone/SMS Tone Tool - its really tiny and FREEWARE!
MortRING
http://www.sto-helit.de/modules/wmpdownloads/singlefile.php?cid=8&lid=66
Haven't tried it yet - but it does sound like it does the same thing as Ringo - but for free.
Click to expand...
Click to collapse
Unfortunately, MortRING has issues with WM 5.0. On most WM 5.0 devices (including my US T-Mobile MDA), it does not recognize the caller ID and reports all calls as "unknown caller". I spent about 3 weeks researching this, and Ringo is the best that I have found (best = works great, and not overly expensive).
agree with the previous post...when i upgraded my xda2 to wm2005 it had some issues with mortring (i used the .97 version). sometimes the caller id would malfunction...at times the phone would ring but there was no sound...doing a soft reset would solve the problem but eventually the bugs would come back.
now i'm using a mio a701 and still mortring has some issues....
Basically I am looking for some software which, on receipt of an SMS will initiate an outbound call to a number in the contact list on the phone.
something along the lines of :-
SMS received from 1-555-5555 containing the word CALLBACK and a password.
Phone then dials 1-555-4444 or any specific contact as defined in its config
it doesn't have to use the contact list but must be triggerable remotely.
Target device is a HTC Hermes. and possibly a StarTrk
The program doesn't need to be stealthy, it's to initiate the call with full permission from the owner but without intervention.
Partly it's for my grandfather, if I give him a Startrk then I want to be able to activate a call remotely if I get notified that he has triggered his medicalert system, so I can try to see if he is ok without him having to answer a call.
I googled, and found nothing, I'm hoping someone here can either write an app that can do what I need, or suggest a product that will enable me to do this.
Auto answer is too generic, I want it to be just for myself and not all callers, and the password is because there may be times I just want to send a generic SMS
Sounds like you are talking about an SMS Callback trigger, though I have never heard of a mobile based one.
I always seem to want the impossible or the unwritten maybe it's time one was written?
Crash Override said:
I always seem to want the impossible or the unwritten maybe it's time one was written?
Click to expand...
Click to collapse
just unwritten, it's not impossible
pretty easy actually
i'll try to throw some together this week if/when I have the time
try this
Just place it on the phone and edit the config.ini if needed default settings are:
trigger = CALLBACK
password = pass
I tested this on my TyTn2, and it seems to do what you wanted, the program will activate the speaker when calling (can be changed in the config.ini)
this way if your grandfather cannot reach the phone he still be able to talk..
But test it before use, I'm not sure how sensitive the mic of the phone is.
I do like the idea so I'll probably add some more functionality
- auto pickup on call from fixed number
- status
- call/sms log
Let me know what you think.
PS. this was created for a touch screen device not a smart phone...
also I can not be held responsible for damages, phone bills etc.
but that goes without saying ..right
-=edit=-
tested by sending an SMS to myself, the program then called my number, but when i tried with a friends phone it didn't work
let me know if it works for you (if you have 2 phones)
also make sure if the number you send it from is in your phonebook or not (could be the issue)
-=edit=-
that is the issue, working on it
Issue solved
now I need to figure out how to replace the attachment
I'll add it in a new post
I also believe SKSchema can do this in watch mode. Actually SKSchema can do lots of cool things in watch mode.
new version attached
-=edit=-
build a cab, also added apptodate support
is it just me or does it seem to autodial the number that sent the SMS?
one addition would be the facility to set the option that if number X sent the SMS then callback to number Y
example - if I am in the US I will have the number 1-555-1234 but my grandfather is in the UK - +44-555-5555
I run a voip line with a UK DID number such as +44-555-6666 so when the SMS is received from 1-555-1234 the return call goes to the +44-555-6666 instead of the US Cellphone (cost reasons lol, UK landline free, international call of any length = US national debt)
Here is a SMS Trigger I built, do not know if that satisfy you.
Check rk-SMSSwitch under my signature.
Crash Override said:
is it just me or does it seem to autodial the number that sent the SMS?
one addition would be the facility to set the option that if number X sent the SMS then callback to number Y
Click to expand...
Click to collapse
yes you are right, don't know how i could have overlooked that
I'll fix this in the next version
any other requests?
:-D
-=edit=-
Program updated, you should be able to run apptodate to get the new version
don't you love just that program
Mr_Gee said:
any other requests?
:-D
-=edit=-
Program updated, you should be able to run apptodate to get the new version
don't you love just that program
Click to expand...
Click to collapse
Will there be a Smartphone version of this app that I could run on my QTek 8500 (StrTrk) ?
Thanks
timwb said:
Will there be a Smartphone version of this app that I could run on my QTek 8500 (StrTrk) ?
Thanks
Click to expand...
Click to collapse
Sorry, i just noticed this reply
To be honest i wasn't planning on creating one, but i could give it a shot
the biggest problem is i don't have a Smartphone to test it on..
I'm sure you could probably find a few testers in the forums, there's quite a lot of people on here!
I'll obviously be willing to test anything you are able to come up with. I don't know where you are located mr gee but on ebay UK you can buy an old Orange spv c500 (HTC Typhoon)or c600 (HTC Tornado I think) really cheap now. There are also WM6 roms available for these devices on this site somewhere.
timwb said:
I'm sure you could probably find a few testers in the forums, there's quite a lot of people on here!
I'll obviously be willing to test anything you are able to come up with. I don't know where you are located mr gee but on ebay UK you can buy an old Orange spv c500 (HTC Typhoon)or c600 (HTC Tornado I think) really cheap now. There are also WM6 roms available for these devices on this site somewhere.
Click to expand...
Click to collapse
I already checked eBay, and there might be some good ones but I don't want to overpay
I'll keep it in mind
Attached is the same program but compiled for a smartphone, I'm not sure if it will work, I remembered I have an emulator for smartphone installed, but I received an error message when running the exe.., I think because the CF.NET wasn't installed..
let me know
I tried it on my QTek 8500. The exe ran but all I got was a window with a blue background and the words "SMS2Call v. 0.03" in black.
No buttons to press or anything, had to use Task Manager to exit it. Which id did without complaint. Thanks for trying, some work may be needed I think
timwb said:
I tried it on my QTek 8500. The exe ran but all I got was a window with a blue background and the words "SMS2Call v. 0.03" in black.
No buttons to press or anything, had to use Task Manager to exit it. Which id did without complaint. Thanks for trying, some work may be needed I think
Click to expand...
Click to collapse
Currently that is the program
Could you try to edit the ini file?
in case you have 2 phones, add the number from the 2nd phone in the file
save and run the program
send an sms from the 2nd phone with the passcode mentioned in the ini file
your 1st phone should call this number after the SMS receipt
I know the program doesn't look like much but i might fix this in the future
when i do i'll also look at the exit button.
the reason i didn't was because the application was for an older person,
this person could be playing around with the phone accidentally closing the program ...
I looked in the .ini file and then tried sending a text to the phone containing the words CALLBACK PASS. I tried this with/without a space, up and lower case, with the program in the background or on screen but it didn't do anything. Do I have to put a shortcut in the Startup folder or something? Or am I not formatting the text message properly? The sending phone number is in the contacts list if that makes a difference.
Any ideas?
Thanks
Could you just not set his phone to auto answer ? - that way you can call him any time.
timwb said:
I looked in the .ini file and then tried sending a text to the phone containing the words CALLBACK PASS. I tried this with/without a space, up and lower case, with the program in the background or on screen but it didn't do anything. Do I have to put a shortcut in the Startup folder or something? Or am I not formatting the text message properly? The sending phone number is in the contacts list if that makes a difference.
Any ideas?
Thanks
Click to expand...
Click to collapse
not really, assuming it works maybe it has to do with the formatting,
Callback should be in capitals and pass in lower letters.
when I tested this with my TYTN2 it worked the way it should.
also did you enter the default number ? e.g. the number that will be called?
PauloJ5 said:
Could you just not set his phone to auto answer ? - that way you can call him any time.
Click to expand...
Click to collapse
[sarcasm]
Gee why didn't I think of that...
[/sarcasm]
Seriously have you read the thread?
the topic starter didn't want it this way for several reasons...
Default number and closed flip
I didn't enter a default number because I want it to respond to any number that sends the text. I deleted the DefaultNumber line from the config and it worked, to a point. The phone I'm running it on is a Qtek 8500/HTC StrTrk, which for those who don't know, is a flip phone. My problem is this, if the phone is closed when the text is received the call is made but cut off immediately because the phone is set to hang up calls on closing. Nowhere can I find a setting to stop this from happening, anybody have any ideas?
Hi All,
First question from me. I have just moved to the TD2 from nokia n95. On the N95 you could set it so that is would say the callers id when they rang. So, I had a short ring tone that would play, then it would say the name and cycle.
Does any body know if it is possible (or how to do it) on the TD2.
thanks for your help and ideas.
cheers
Use Voice Command...START-SETTINGS-PERSONAL-VOICE COMMAND
if it is installed on your device.
thanks jdwilson,
it is not installed on my device - do you know how I would get it?
Search on this forum or Google.
Well, I have got it installed and working for everything but the caller id (despite all the things ticked and setting the bits from other threads). If anybody has any great ideas they will be welcomed, but I will play.
It certainly allows a gap in the tone, but the phone is silent, then the tone starts up again, so I think it is trying to do it.
Use this:
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=673
But can it be used on other ROM versions?
I was never clear what, exactly, this update did - and since HTC said it could only be applied to a ROM version that pre-dated mine (and 6.5) I never found out!
If this 'fixes' any issue for Caller ID is it applicable to WM6.5???
thank fighter for the suggestion, but my rom version is not suitable
Read this:
http://forum.xda-developers.com/showthread.php?t=561303
thanks again fighter, my caller id displays fine it is just not annouced.
When you open Voice Command, and select the phone option, on the right side of the screen, is a notification button, select that, then you will have 3 options for the announcement, make sure you select the one you want.
Yes, I have tried all of the options in notification, thanks. I will keep digging.
NetCallerID does not work in all countries and has no audio, but as an alternatieve;
http://www.freewarepocketpc.net/ppc-download-netcallerid.html
billkelly said:
Yes, I have tried all of the options in notification, thanks. I will keep digging.
Click to expand...
Click to collapse
Hi What is the version on MSVC? hope you installed in RAM itsef and not in storage. try uninstall and install again - soft reset.. after that in VC notifactions choose second or third option .. it should work
Hope this will help
billkelly said:
Well, I have got it installed and working for everything but the caller id (despite all the things ticked and setting the bits from other threads). If anybody has any great ideas they will be welcomed, but I will play.
It certainly allows a gap in the tone, but the phone is silent, then the tone starts up again, so I think it is trying to do it.
Click to expand...
Click to collapse
Take a look here, I hope it will solve your problems http://forum.xda-developers.com/showthread.php?t=619358
You can also download the cab file from here: http://forum.xda-developers.com/showpost.php?p=5485644&postcount=44
I never tried the cab but it should work.
Thanks for the help.
my version is 1.60.4622.0
I have tried most of the settings in the first link (and some others in another thread).
The control cab generates errors (I have installed mortscript)
I was wondering if the system was not putting the ttscallerid.wav in the volatile, so I am trying to search the the phone for the file, I have not found it yet - using activesync and explorer.
Still digging, but the other features are quite good.