Database Users

Special Edition ROM 1.2 and PhonExt

Rom version 1.2 Rocks, but I cant set ringtones using PhonExt via either contact or category settings......I've made sure the country code is correct and tried numbers with UK country code and without..... Can anyone help

Make sure your PhoneExt is running and you haven't accidentally closed it. You will see a little mobile phone on the extreme right of the Today screen Taskbar. You can click this icon and add Category (Group) Ring tones, or you can go directly to your Contacts, select a contact by holding down the stylus on the name and choose 'Set Ring Tone' in the menu that pops up.
Hope this helps.

Thanks, just check and its definatley running, any more ideas ?
Thanks again

No further ideas, I'm afraid. When all else fails, RTFM! :wink:
http://phonext.oabsoftware.nl/body-manual.htm

It seems you have to put the wav file inside the \windows\ringtone folder to get it works.

thanks everyone still no joy and even read the manual ! any more ideas !

Hope this story helps. I have ROM 1.1 and couldn't get PhonExt to ring the way I wanted. I discovered tonight that the .wav files should be <100k otherwise it doesn't ring. Perhaps bigger files take too long to load???
......just discovered that this is not true....it still doesn't work. If the files are too big though, the ring is not previewed when assigned to a category or contact.

PhoneExt
I am having the same problem with the ringtones as they don't want to work for the people calling. Guess I'm gonna end up switching to different program for rings until it's figured out what's causing it not to work. I haven't tried the less than 100k thing but will today.

MS Voice Command when unit is closed?

Hi all, I am new to this forum.
I own a Dopod 900, and currently trying to get MS Voice Command to work properly with my unit. I believe one of the problem with this application is that it does not respond to command while the unit is in closed mode (the pda screen in inside). Is solution to this problem already available?
I have searched the forum but have not been able to find any solution. I apologize if I missed it, please kindly point me to that posting if there is any.
Any advise is greatly appreciated.
- Josh :?:

From what I've read so far there isn't a fix I'm afraid. It's not fully compatible with WM2005 and will just have to wait for an update from Microsoft :-(

Thanks for your reply. That's too bad. I really have high hope that there is a solution for just this one problem, as there are already tweaks for the other problems. Being unable to receive command in closed mode really make MS Voice Command very much less usable. Too bad.
- Josh

I agree, but at least it's a step up with the other voice dial (that comes it with?). Couldn't do dialling from BT headset at all on WM2003 :-(

The "closed mode" doesn't bother me as I carry the Exec round in a Krusell case, with screen up. This allows me to instantly answer the phone when it rings (having seen who's calling first on the screen).
But there are a few more annoying problems with MS Voice Command 1.5 (I have UK version) present under Windows Mobile 5.0.
This one is unique to WM5.0:
- The first is when I try to call up a certain contact by "Show John Smith", it would show John Smith's contact under WM2003/03SE, but under WM5.0 it just shows blank screen on the Summary tab. This is still a proper contact, if you go to Notes tab, you see proper notes for this contact. You can press Edit and it will be edited... BUT, meanwhile if you just open Contact app, the ones you open are working great.
GBugger...
The following coupla' niggles are also present under WM2003/03SE.
- The days of week when answering "What date is it today" (somehow UK regional settings don't even have it, so I had to enable it in registry under NLS settings) -- all are announced correctly except Wednesday & Thursday, which are sounding simply as "Wed" and "Thu" instead of proper name.
- The signal strength for 1,2,3 and 4 "units" is announced as 30, 60, 90 and 100% correspondingly, instead of 25,50,75,100 which would seem more logical here. I don't know though if it's just caused by something real or an attempt to easily convert
That said, the application is enormously useful especially with the Krusell case, because the carrying shape for Exec in this case is PDA shape with screen up; but it's protected by screen cover of the case and you can't really write on the screen without opening the case -- so voice activation of programs and then controlling them by 5-way navigation control, is really a great way of using the Exec Examples of these programs are the eWallet (ever forgotten your PIN numbers or clothes size?) and speaking date/time, very convenient when you can't look down there.
Hopefully Microsoft corrects these small errors - the WM5.0 devices are the future.

EastExpert said:
Hopefully Microsoft corrects these small errors - the WM5.0 devices are the future.
Click to expand...
Click to collapse
Really, MS should have had this wrapped up ages ago. So disappointed. I want a device like the Exec, but with Voice Command fully working and A2DP sorted, and it's a shame I still can't get all this.
I was so used to the VC software on my JAM, shame the Exec is giving problems.
And I'm tired of tangling my headphones up...
MS, sort all this out already.

EastExpert said:
The first is when I try to call up a certain contact by "Show John Smith", it would show John Smith's contact under WM2003/03SE, but under WM5.0 it just shows blank screen on the Summary tab. This is still a proper contact, if you go to Notes tab, you see proper notes for this contact. You can press Edit and it will be edited... BUT, meanwhile if you just open Contact app, the ones you open are working great.
Click to expand...
Click to collapse
Copy the outres.96.dll into the windows folder and the contact will display correctly.

I'm sorry, but no, it doesn't work for me. Same effect as without outres.96.dll. And yes, I made a soft reset after copying it to the windows dir.
So the next question now is: how to remove the file again?
If I try to delete it, Resco Explorer says "Cannot delete file 'outres.96.dll'. The process cannot access the file because another process has locked a portion of the file."
If the file is useless, then I want to remove it from the device. But it has been blocked by another process.
Thanx in advance
tomestos

I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.

I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.

guc925 said:
I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.
Click to expand...
Click to collapse
I have answered 'yes' to the security check. Nevertheless the dll doesn't work for me. So I want to remove it now, but I can't because it's blocked by some process.
Thanx in advance
tomestos

I've copied the file gnassel suggested into my Windows directory (using the explorer on my desktop pc).... rebooted the exec.. and voila.. it's working like a charm now.. My voice command shows the contact when I say : "Lookup XXXX" or when i call someone, it confirms the person and shows his information just fine. Norte I am usin the u.s. version of voice command 1.5.
Thanks gnassel !

This is a reply to my own posting above.
I did the soft reset using an application called 'psShutXP' (maybe someone knows it; one use it in order to switch off or soft reset the device). Voice Command's contacts mask doesn't worked.
A few minutes ago I soft resetted the device using the "original" reset hole. And voila: Voice Command works as expected!
So there seems to be a difference between "soft reset" using psShutXP and soft reset using the reset hole.
Sorry for the confusion. THE FILE OUTRES.96.DLL WORKS!
By the way: What exactly does outres.96.dll?
Best regards
tomestos

Many thanks gnassel, it works great..

The file was from OzVGA

Thanks for drawing attention to it and posting it, or I wouldnt have know..
Take a thanking damnit

Guys, where do I put the outres.96 dll file again? If I am using File Explorer there is a "WINDOWS" Folder from the very root with a lot of files. Is that the folder I am suposed to put the oures.96 dll file or just leave it outside in the main root?

cktlcmd said:
Is that the folder I am suposed to put the oures.96 dll file?
Click to expand...
Click to collapse
yes
c:\windows\
;-)

gnassel said:
cktlcmd said:
Is that the folder I am suposed to put the oures.96 dll file?
Click to expand...
Click to collapse
yes
c:\windows\
;-)
Click to expand...
Click to collapse
It's "\windows" not "C:\windows".
Best regards
tomestos

Thanks everyone. I thought for a while I have to plug it in my computer too.

Disable SMS Sent notification

Hi,
I've just got an XDA mini S on O2. Despite the check box in the messages section being unchecked, the sound being entirely off or on vibrate and the setting in sounds and notifications being left off, I still get the really irritating SMS sent message and ring tone. I don't mind the pop up but I want the phone to actually be silent when I tell it to be. I've tried the Reg changes using Total Commander - both SMSNoSentMsg and SMSDisableNotification neither seem to work. Any help would be greatly appreciated as this is driving me mad.
Thanks
Tom

tmcox said:
Hi,
I've just got an XDA mini S on O2. Despite the check box in the messages section being unchecked, the sound being entirely off or on vibrate and the setting in sounds and notifications being left off, I still get the really irritating SMS sent message and ring tone. I don't mind the pop up but I want the phone to actually be silent when I tell it to be. I've tried the Reg changes using Total Commander - both SMSNoSentMsg and SMSDisableNotification neither seem to work. Any help would be greatly appreciated as this is driving me mad.
Thanks
Tom
Click to expand...
Click to collapse
I'm not sure what version of Windows Mobile you are using on your device, but there is a way to correct this in WM6. Download and install the program I have attached below and then configure it however you like.
It is called Schaps Advanced Configuration Tool. It will allow you change a number of settings including the Message Sent notification.
This should work for you. Good luck!
Dan.

its wm5. the latest from O2.

Would that tool work in wm5?

To tell you the truth, I don't know. I have never tried it on WM5.
The only thing I could really tell you is to give it a try and if it didn't work then what do you have to lose? If it doesn't work then just un-install it.

I tried it and it didn't work.
Thoroughly annoying.

tmcox said:
I tried it and it didn't work.
Thoroughly annoying.
Click to expand...
Click to collapse
Hmmm... I don't know any other way. Sorry man. Try flashing WM6 to your phone and then install it. This way I know it will work.

Hmmm....
Nice one, I'm using WM6.
I'll try this one this week.

tmcox said:
Hi,
I've just got an XDA mini S on O2. Despite the check box in the messages section being unchecked, the sound being entirely off or on vibrate and the setting in sounds and notifications being left off, I still get the really irritating SMS sent message and ring tone. I don't mind the pop up but I want the phone to actually be silent when I tell it to be. I've tried the Reg changes using Total Commander - both SMSNoSentMsg and SMSDisableNotification neither seem to work. Any help would be greatly appreciated as this is driving me mad.
Thanks
Tom
Click to expand...
Click to collapse
First download totalcmd (another file browser)
Create a blank wav file.. call it notify.wav (sometimes notify.wma)
Use totalcmd to replace the one in the windows directory with the one you created..
It works with some versions of wm5 though, so good luck..

I finally got it to work using the blank wav method above. Took a while as I forgot to change the read only bit. Bizarrely I can't delete the original so currently have 2 versions according to some explorers but only 1 according to others. Either way a test proved that I no longer get the tone.
HURRAH

Fantastic stuff guys, this has been annoying the hell out of me for ages. It is the notification of how much credit left on the PAYG card from O2. Does my head in!

Disable SMS Sent Notification
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
Click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
Name the New Key as "Settings"
Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1
Soft reset your device

What about notifications of the network?
There are some notifications (i.e. network messages) that still notify with a sound even when the device is on silent mode. Is there any workaround on this?

Great program! I was wrecking my brain trying to figure out how to disable the notification sound on my Htc Touch, none of the registry hacks worked for me.

Awesome app! I can't thank you enough for posting it--that noise was getting really irritating.

thanks dharvey for the application!!! it works great!! no more irritating notification!!! =)

Is there any software which can do this?

Basically I am looking for some software which, on receipt of an SMS will initiate an outbound call to a number in the contact list on the phone.
something along the lines of :-
SMS received from 1-555-5555 containing the word CALLBACK and a password.
Phone then dials 1-555-4444 or any specific contact as defined in its config
it doesn't have to use the contact list but must be triggerable remotely.
Target device is a HTC Hermes. and possibly a StarTrk
The program doesn't need to be stealthy, it's to initiate the call with full permission from the owner but without intervention.
Partly it's for my grandfather, if I give him a Startrk then I want to be able to activate a call remotely if I get notified that he has triggered his medicalert system, so I can try to see if he is ok without him having to answer a call.
I googled, and found nothing, I'm hoping someone here can either write an app that can do what I need, or suggest a product that will enable me to do this.
Auto answer is too generic, I want it to be just for myself and not all callers, and the password is because there may be times I just want to send a generic SMS

Sounds like you are talking about an SMS Callback trigger, though I have never heard of a mobile based one.

I always seem to want the impossible or the unwritten maybe it's time one was written?

Crash Override said:
I always seem to want the impossible or the unwritten maybe it's time one was written?
Click to expand...
Click to collapse
just unwritten, it's not impossible
pretty easy actually
i'll try to throw some together this week if/when I have the time

try this
Just place it on the phone and edit the config.ini if needed default settings are:
trigger = CALLBACK
password = pass
I tested this on my TyTn2, and it seems to do what you wanted, the program will activate the speaker when calling (can be changed in the config.ini)
this way if your grandfather cannot reach the phone he still be able to talk..
But test it before use, I'm not sure how sensitive the mic of the phone is.
I do like the idea so I'll probably add some more functionality
- auto pickup on call from fixed number
- status
- call/sms log
Let me know what you think.
PS. this was created for a touch screen device not a smart phone...
also I can not be held responsible for damages, phone bills etc.
but that goes without saying ..right
-=edit=-
tested by sending an SMS to myself, the program then called my number, but when i tried with a friends phone it didn't work
let me know if it works for you (if you have 2 phones)
also make sure if the number you send it from is in your phonebook or not (could be the issue)
-=edit=-
that is the issue, working on it
Issue solved
now I need to figure out how to replace the attachment
I'll add it in a new post

I also believe SKSchema can do this in watch mode. Actually SKSchema can do lots of cool things in watch mode.

new version attached
-=edit=-
build a cab, also added apptodate support

is it just me or does it seem to autodial the number that sent the SMS?
one addition would be the facility to set the option that if number X sent the SMS then callback to number Y
example - if I am in the US I will have the number 1-555-1234 but my grandfather is in the UK - +44-555-5555
I run a voip line with a UK DID number such as +44-555-6666 so when the SMS is received from 1-555-1234 the return call goes to the +44-555-6666 instead of the US Cellphone (cost reasons lol, UK landline free, international call of any length = US national debt)

Here is a SMS Trigger I built, do not know if that satisfy you.
Check rk-SMSSwitch under my signature.

Crash Override said:
is it just me or does it seem to autodial the number that sent the SMS?
one addition would be the facility to set the option that if number X sent the SMS then callback to number Y
Click to expand...
Click to collapse
yes you are right, don't know how i could have overlooked that
I'll fix this in the next version
any other requests?
:-D
-=edit=-
Program updated, you should be able to run apptodate to get the new version
don't you love just that program

Mr_Gee said:
any other requests?
:-D
-=edit=-
Program updated, you should be able to run apptodate to get the new version
don't you love just that program
Click to expand...
Click to collapse
Will there be a Smartphone version of this app that I could run on my QTek 8500 (StrTrk) ?
Thanks

timwb said:
Will there be a Smartphone version of this app that I could run on my QTek 8500 (StrTrk) ?
Thanks
Click to expand...
Click to collapse
Sorry, i just noticed this reply
To be honest i wasn't planning on creating one, but i could give it a shot
the biggest problem is i don't have a Smartphone to test it on..

I'm sure you could probably find a few testers in the forums, there's quite a lot of people on here!
I'll obviously be willing to test anything you are able to come up with. I don't know where you are located mr gee but on ebay UK you can buy an old Orange spv c500 (HTC Typhoon)or c600 (HTC Tornado I think) really cheap now. There are also WM6 roms available for these devices on this site somewhere.

timwb said:
I'm sure you could probably find a few testers in the forums, there's quite a lot of people on here!
I'll obviously be willing to test anything you are able to come up with. I don't know where you are located mr gee but on ebay UK you can buy an old Orange spv c500 (HTC Typhoon)or c600 (HTC Tornado I think) really cheap now. There are also WM6 roms available for these devices on this site somewhere.
Click to expand...
Click to collapse
I already checked eBay, and there might be some good ones but I don't want to overpay
I'll keep it in mind
Attached is the same program but compiled for a smartphone, I'm not sure if it will work, I remembered I have an emulator for smartphone installed, but I received an error message when running the exe.., I think because the CF.NET wasn't installed..
let me know

I tried it on my QTek 8500. The exe ran but all I got was a window with a blue background and the words "SMS2Call v. 0.03" in black.
No buttons to press or anything, had to use Task Manager to exit it. Which id did without complaint. Thanks for trying, some work may be needed I think

timwb said:
I tried it on my QTek 8500. The exe ran but all I got was a window with a blue background and the words "SMS2Call v. 0.03" in black.
No buttons to press or anything, had to use Task Manager to exit it. Which id did without complaint. Thanks for trying, some work may be needed I think
Click to expand...
Click to collapse
Currently that is the program
Could you try to edit the ini file?
in case you have 2 phones, add the number from the 2nd phone in the file
save and run the program
send an sms from the 2nd phone with the passcode mentioned in the ini file
your 1st phone should call this number after the SMS receipt
I know the program doesn't look like much but i might fix this in the future
when i do i'll also look at the exit button.
the reason i didn't was because the application was for an older person,
this person could be playing around with the phone accidentally closing the program ...

I looked in the .ini file and then tried sending a text to the phone containing the words CALLBACK PASS. I tried this with/without a space, up and lower case, with the program in the background or on screen but it didn't do anything. Do I have to put a shortcut in the Startup folder or something? Or am I not formatting the text message properly? The sending phone number is in the contacts list if that makes a difference.
Any ideas?
Thanks

Could you just not set his phone to auto answer ? - that way you can call him any time.

timwb said:
I looked in the .ini file and then tried sending a text to the phone containing the words CALLBACK PASS. I tried this with/without a space, up and lower case, with the program in the background or on screen but it didn't do anything. Do I have to put a shortcut in the Startup folder or something? Or am I not formatting the text message properly? The sending phone number is in the contacts list if that makes a difference.
Any ideas?
Thanks
Click to expand...
Click to collapse
not really, assuming it works maybe it has to do with the formatting,
Callback should be in capitals and pass in lower letters.
when I tested this with my TYTN2 it worked the way it should.
also did you enter the default number ? e.g. the number that will be called?
PauloJ5 said:
Could you just not set his phone to auto answer ? - that way you can call him any time.
Click to expand...
Click to collapse
[sarcasm]
Gee why didn't I think of that...
[/sarcasm]
Seriously have you read the thread?
the topic starter didn't want it this way for several reasons...

Default number and closed flip
I didn't enter a default number because I want it to respond to any number that sends the text. I deleted the DefaultNumber line from the config and it worked, to a point. The phone I'm running it on is a Qtek 8500/HTC StrTrk, which for those who don't know, is a flip phone. My problem is this, if the phone is closed when the text is received the call is made but cut off immediately because the phone is set to hang up calls on closing. Nowhere can I find a setting to stop this from happening, anybody have any ideas?

MS Voice Command 1.6

Has anyone tried to install MS Voice Command 1.6, does it work? Any recommendations?

[email protected] said:
Has anyone tried to install MS Voice Command 1.6, does it work? Any recommendations?
Click to expand...
Click to collapse
I have installed it and it works VERY well. I was really surprised that as soon as I installed the CAB file I was able to say "Play..." then any artist or album in my music library - right out of the box. Voice recognition was incredibly accurate with no setup required (I.E. "Play - A Tribe Called Quest" consistently no probs )
HOWEVER I have actually uninstalled it recently as I was watching the task manager and noticing that the 'VoiceCommand.exe' process was consistently jumping between 1% and 12% with no action from me whatsoever. This is not much and might be tolerable for some people but for me it is an added drag!

this program has some bugs
it will delay the sip and it will mess up the ringtone
however you could change the regisitry to fix it
if you don't need it , better dont install it

X807 said:
this program has some bugs
it will delay the sip and it will mess up the ringtone
however you could change the regisitry to fix it
if you don't need it , better dont install it
Click to expand...
Click to collapse
how does one fix this problem?

MrZippo said:
how does one fix this problem?
Click to expand...
Click to collapse
for the ringtone bit i dont know hoe to fix the registry
for sip issue u can check out the wikipedia here. if you are not an advance user defintely not risk to edit your registry

I tried it, but, maybe coincidence, maybe not, I found my battery ran down quite quickly. This happened over 3 days, so i uninstalled it, and it has gone back to normal battery time.
Maybe it is something to do with what SamasQ mentions above. Maybe its just my phone.

Did the incoming calls announcement work as well?
For me it was the only thing that didn't work.
Voice dial, running programs, play music, announcing new messages and calendar events - all worked. But incoming caller names did not.
On my old HTC TyTN II all of the above worked.
So I'm wondering, was it just me or don't the incoming caller announcement work on X1?

Draqula, same here, all worked but incoming call announcements.
try going to some website (win-mo experts or something and look for bengaliath, he did some extensive post on this program. I haven't had time to look yet, but its worth a shot.)
BTW, which ROM you using, (UK international?)

fpbiii said:
Draqula, same here, all worked but incoming call announcements.
try going to some website (win-mo experts or something and look for bengaliath, he did some extensive post on this program. I haven't had time to look yet, but its worth a shot.)
BTW, which ROM you using, (UK international?)
Click to expand...
Click to collapse
R1AA017 R15A GENERIC_UK
I read the bengalih guide. It was originally posted here at xda forums and helped me a lot when setting up VoiceCommand on the HTC TyTN II.
Now it's available here: http://www.winmo-experts.com/viewtopic.php?f=11&t=2&start=0&st=0&sk=t&sd=a
Unfortunately, there was no helpful info for me there.
I found and checked the following registry key...
Incoming Announcements are the function of the voicecmd.exe and the following registry key:
HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce
"Script" = "as5p"
"Category" = "VoiceCommand1"
"Sound" = "Application Data\Volatile\TTSCallerID.wav"
... and found that on my X1 there was an extra slash in the location of the wav, but fixing it didn't help.
Let me know if you find any new info.

I have successfully ported quite a bit of drivers from x1 and blackstone to raphael.. please try the blackstone wavedev.dll (it must be cooked into rom) - on raphael this updated driver fixes voice command announce problem

Voice Command 1.6 also disconnects the bluetooth headset after you give a voice command. You have to re-establish the bluetooth connection again each time.
I've already removed the Voice Command because of this.
Other than this problem, it works very well in the X1.

The small print below the sales pitch for voice commander states "Incoming caller ID announcements will be spoken via the phone speaker on Sony Ericsson Xperia X1s with a Windows Mobile build prior to 15097.3.0.0. "
Any ideas how to find the build number?

windows mobile build
esco666 said:
The small print below the sales pitch for voice commander states "Incoming caller ID announcements will be spoken via the phone speaker on Sony Ericsson Xperia X1s with a Windows Mobile build prior to 15097.3.0.0. "
Any ideas how to find the build number?
Click to expand...
Click to collapse
For windows mobile build Go to settings/system/system info.
I/ve tried in all combination, but coice command don't work with the callar id function. I purcased it, but now refund, don't work!

voice command 1.6 works fine on my X1 too except call announcement. I have tried all the recommended patches, but when I replace the files nothing happens or i get some crashes.
Has anyone tried this allready with success?
many thanks
Boris

I have read all these posts and see that most poeple have a problem with the voice caller ID being read out....
I too installed (though a previous version) v1.5 and everything works fine except for caller ID voice read out...
Another thing i found is that it would read email subject headings from my 2nd email account but not from my first email account....might just be coincidence...
Bit concerned now that I read about the 1%-12% fluctuations when you arent even using it....hmmm

Same problem, no caller ID name readout
Same problem, the callerID is not read out.
What version are you guys running of MS Voice Command? There are multiple versions of 1.6.xxxxxx.

I am trying to use it with my BT headset. That is speaking the name into my bt headset after pressing the button on it. Does that work or do I always have to use my phone for speaking my commands?
EDIT: never mind. I got it to work. By restarting the phone (so typical of Windows)

When i installed Voice Command on my Xperia... it errored out at the end of installation, but completed regardless. It is working perfectly in every aspect except announcing incoming calls. It is great when it announces messaes and e-mails so that i know whats coming in and from who...
It did announce an incoming call once or twice... but out of the blue.

msalmank said:
It did announce an incoming call once or twice... but out of the blue.
Click to expand...
Click to collapse
Interesting. For me too, that's the only problem. Incoming announcements.
Somebody mentioned it disconnects BT HF and you have to reconnect manually - not true for my Jabra BT8040, it stays connected or automatically reconnects, anyway it works.
Especially useful when driving and getting new messages and next appointments announced by BT HF.

just a question that links indirectly to this thread:
is there a way to remap the button for voice command? somehow I wanted to invoke the voice command app via the earphones' button SE X1 has. so I don't have to grab my phone inside its pouch and unlock it and press either the 2 buttons I mapped em with.