Related
Hi, i'm from Spain (I don't speak english very well) and i've got a problem with my Imate Jam. After a Hard Reset, Smart dialing and other aplications didnt install. Then i tried to install Smart Dialing with a .cab file but i get the following error: The file \windows\iacontacts.dll are used or in ROM.
I tried to install it at the begining, but i get the same error.
can anybody help me please?
Thank you
nobody? I need to do a hard reset?
thanks
Hi, the messega that "\windows\iacontacts.dll is in use" indicates that the program is already installed and running. If not you can try the following:
- download memmaid (http://www.pocketgear.com/software_detail.asp?id=14279)
- install it, it offers control of autostart programs and services
- find and disable the entry that corresponds too iacontacts.dll
- soft reset and install
Or you can do (prolly easier):
- use a file manager to go into the windows dir and find that iacontacts.dll (prolly hidden so use something like Resco Explorer to see hidden files)
- you wont be able to delete it and you should not do it anyway
- but you can rename it to something like iacontactsold.dll
- softreset and install the cab file, it will not bother you now because the dll has not been loaded because it has not been found (you renamed it)
- you can then go into the win dir and should find your renamed dll as well as a new iacontacts.dll, delete your renamed one now
By the way: May I ask what Smart Dialling does anyway? I've not figured that out yet. Its installed on my S110 and I have options for that in the phone tool but no idea what it actually does or how it behaves when it is not installed.
Thank u very much! I followed the second way and i get it
With Smart Dialing for example: To call "Churri" (my girlfriend) you can write 248774 instead of 222-44-88-777-777-444. To find a number for example 99565856, you write 995 and Smart dialing find it automatically.
Thank you very much
Ah ok so you can use fragments of numbers until the right ones are picked out. Pretty neat. I'm happy it worked for you.
Dear all 818pro(ENG OS)
The reason causing memory card disappear problem is dopod built-in software.(inside Extension Rom)
Only one method to solve, hard reset the PDA but without installed any built-in software as follow:
Right now I hard-reset the PDA, until the password setup, and then the PDA begin install build-in software...soft reset immediately.
If you used above hard-reset method which don't installed any built-in software. You only lost:
1. Smart Dailer
2. Built-in Voice Commander
3. Autoconfig
4. clearvue pdf
I used two days and everything work fine. You may ask why I so sure? Because I noticed the speed of reading memory card is different before which listed below:
1. Before using above mentioned method: When the PDA turn on (In sleeping mode and phone on mode), it need 1-3 seconds to read the memory card. If you installed Today Plug-in Software, you may found that it need 1-3 seconds to detect the memory card.
2. After using above mentioned method: When the PDA turn on, the PDA detect the memory card simultaneously.
As a result, I can assure this method can solved the memory card disappear problem.
Some experience would like to share with all user:
1. I installed all programs in the ROM. If someone installed programs in the memory card, please let me know the result.
2. I can installed back the smart dialer software. Please search this forum to download.
3. When you connected GPRS, a 'Disconnect' button (and Timer) to the Connection List for GPRS is disappeared. You can make registry hack to switch back.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
4. PDA can detect 'Phone Service Provider' automatically. However, when you need GPRS, you need manuel setup. I used 'PEOPLES' which is Hong Kong Service Provider and take as a Example setup:
Go to Setting > Connections > Tap Connections
1. Choose > My ISP - Add a new modem connection
2. You need to enter > a Name (Which name you like) and Select a modem [Cellular Line (GPRS)] > Next
3. Acess point name : Peoples.net > Next
4. Ignore the user name and password. > Finish
Thanks for the Reg Hack!!! Worked perfectly on the Dopod 818Pro!!!!
Thanks!!!
voyager
sas90850 said:
2. I can installed back the smart dialer software. Please search this forum to download.
Click to expand...
Click to collapse
Hi sas90850,
What a good job you've done! Excellent!
I'm wondering whether this topic is the instruction you said (WM5 smart dial)
or you could point out where I can download the smart dialer software and have an installation instruction, thanks.
I've 818Pro and would like to do the same "UPGRADE"... :wink:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
sas90850 said:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
Click to expand...
Click to collapse
Just to let everyone know that you already have this same file as well as the GPRS disconnect button CAB file in your own Dopod 818Pro's Extended_rom. You can browse and copy files in this hiden folder with GSfinder.
This worked for me also with the jamin. I soft reset after hard resetting and it gave me back rom and fixed the sd issue. Thanks
Edit: After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
Hi, this method seems to have solved most of my Jamin troubles too! Thanks!
I need just some help to get the GPRS timer: I don't find the registry. Is it in the HKEY_CURRENT USER OR THE HKEY_LOCAL_MACHINE? I found the Control Panel\Phone, but not the "Flags 2" registry that needs changing as described.
Many thanks!
Dear Fidipaldi
You need to add a new registry. Make sure you use DWORD Value. The location is shown below.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
1. To add a Disconnect button only:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 8
2. To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 16
3. To disable both the Disconnect button and the timer:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 0
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Dear SAS,
Many thanks for your help!!
It works great! I also managed to get the smart dialer back. The only application that is missing is Clearview.
So far my Jamin does not seem to crash on a regular basis as it did before. It must be the add on software that made the device crash.
Finally I can enjoy the device. Thanks again!
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
sas90850 said:
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Click to expand...
Click to collapse
Here's what I usually do on a new device or after a hard reset. I have about 10 progs on my sd card (total commander, tweaks2k2, etc...) and I have created shortcuts to them and placed them in a folder on my sd card. I then copy those and paste them in the /windows/start menu/programs folder and everything works well. I've noticed this quirky behavior on the jamin so far?
I did what you recommended by not installing the ext rom. I'm happy with a quicker device and more rom; however, I'm still having this little issue with the icons not appearing correctly in the start menu? Kind of strange. The white and blue default box is what's showing up (as if there is no shortcut icon) but the progs open just fine? :shock:
which program should we install
After Hard Reset and Review the extended rom,
There are serveral progarms avaliable for install
I just wonder what program from Extended Rom should we normally install in order to make phone become functional as the standard automatic install of extended rom?
Secondly, what each one of them is for? does anybody has information?
Thank you very much
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Khuanchai said:
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Click to expand...
Click to collapse
After 6 days used, I don't have any soft reset problem at all no matter in standby mode, sleeping mode and/or battery charging either the PDA is turn on/off......any condition.:roll:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
mtarro said:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
Click to expand...
Click to collapse
Thanks Yes it worked temporarily and then after a soft reset...same. I've narrowed it down a bit. The progs show fine in the bottom of the start menu (recently run progs) but if I add them to the top part of the start menu, they show fine until a soft reset....then they don't again. What I also noticed is if I copy the .exe and paste it in the start menu it shows fine....the only problem was when I copied the .exe and pasted a shortcut to the .exe. Anyway, I've settled on a fix. A few of the progs that didn't display correctly, I've just added to ilauncher.
Don't spend any more brain power on it for now....it must be something specific to me as others aren't posting problems like this. Thanks again
@mikewchandler
First of all it's nice to see you again on this forum!
To fix your problem try installing Signed_IconsDll.sa.cab from the extended rom. This should fix your problem!
@ALL
Regarding the SD card issue, the problem seems to be originating from the file Signed_SD_Driver.sa.cab. Not installing just this cab will also solve the problem.
I would suggest installing the following cabs as well as these improve system stability or add functionality:
CAB-ConnectionSpeedMax.sa
CAB-Shortcut-MMS1-JAVA5XX-CV-Dopod........
CAB-WapPushSMS
Signed_Disable_ErrorReport.sa
Signed_DisconnectButton_3s.sa
Signed_IconsDLL.sa
Signed_PIE_View_Default.sa
Signed_Prophet_DopodAsia_UA.sa
Signed_Version.sa
SmartDialing_enable_0915_signed
Thanks kta....it's great being here but I'm going to miss the eten community. :?
Thanks for the tips. Yeah, I didn't install the ext rom at all....I should have mentioned that (if I didn't?). Thanks again.
Edit: Where's the best place to get the files off the ext rom? I don't guess I know how to extract the ext rom to copy before hard resetting, soft resetting to keep it from installing. Hope that runon sentence makes sense.? :roll:
Ok found ICSinstall.cab on here and installed it, soft reset, and attempted to install the latest version of the WMWifiRouter program (which I finally succeeded in sourcing!).
However I get a message telling me cryptically that it 'cannot be installed' after attempting install. I wonder if this is related to ICS...
I now have the InShrUI.exe file in /windows/ *but* attempting to run it gives:
'The file 'IntShrUI' cannot be opened. Either it is not signed with a trusted certificate or one of it's components cannot be found. You might need to reinstall or restore this file.'
I reinstalled it over itself (i.e. ran the cab again) same error.
:-/
Was this the right file? I seem to remember it was dated 11th January 2008??
Thanks again for hte help folks!
I should say I'm running Microsoft Windows Mobile Version 5.0 (OS5.1.195 (build 14955.2.3.0).
Lastly I should say I've started a new topic as the last one was getting a bit off topic my original concern having been answered :-D (thanks guys!)
probably you only opened a shortcut (*.ink) and the shortcut pointed to a not existing file. Another thing is that it also was intsalled correctly (the *.exe), but the dll's or whatever are not installed.
Regards
Thanks. I'll try redownloading and repeating.
I was wondering if the file needed signed with some unique private key or something?
Anyways will give it a shot and report back
softonic123 said:
probably you only opened a shortcut (*.ink) and the shortcut pointed to a not existing file. Another thing is that it also was intsalled correctly (the *.exe), but the dll's or whatever are not installed.
Regards
Click to expand...
Click to collapse
Thanks for your suggestion I'm now a tiny bit further on.
On soft resetting the PPC I get the following error:
'Pocket PC Networking
Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network settings.'
InShrUI is still giving the same error as before (and it's definately the .exe file I'm clicking).
However the improvement is: This time WMWifiRouter succeeded in installing...
However the same PPC networking error occurred during the install. I could probably tweak whatever is causing that error to use a static IP address rather than DHCP probably...but it's kind of dodging the problem.
And as said before I can't launch IntShrUI without getting that error. This time there is a shortcut to it though in program files.
I should also say that neither the executable or the shortcut has an Icon Image (i.e. it's the default no icon blank) so I suppose it might be the .exe file that's corrupt (since the shortcut get's it's icon from there I think?).
Last but not least:
WMWifiRouter reads:
Code:
'Not Connected'
Waiting for connection
I suspect the problem must lie with InShrUI but then again I'm a noob so I'll wait for the XDA gods to come and share their wisdom!
MrVarioII said:
Thanks for your suggestion I'm now a tiny bit further on.
On soft resetting the PPC I get the following error:
'Pocket PC Networking
Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network settings.'
InShrUI is still giving the same error as before (and it's definately the .exe file I'm clicking).
However the improvement is: This time WMWifiRouter succeeded in installing...
However the same PPC networking error occurred during the install. I could probably tweak whatever is causing that error to use a static IP address rather than DHCP probably...but it's kind of dodging the problem.
And as said before I can't launch IntShrUI without getting that error. This time there is a shortcut to it though in program files.
I should also say that neither the executable or the shortcut has an Icon Image (i.e. it's the default no icon blank) so I suppose it might be the .exe file that's corrupt (since the shortcut get's it's icon from there I think?).
Last but not least:
WMWifiRouter reads:
Code:
'Not Connected'
Waiting for connection
I suspect the problem must lie with InShrUI but then again I'm a noob so I'll wait for the XDA gods to come and share their wisdom!
Click to expand...
Click to collapse
Is there no1 who can answer this? Anyone got any ideas?
Device is a hermes (T-mobile Vario-II) running WM5.....
There's one MAN point up for grabs for whoever can solve it!
I tried installing WMWifiRouter 0.89 onto a ROM which didn't have ICS included (which meant I had to try the same route you did) onto my Vario 2... I just couldn't get it to work, and I spent a while trying to make it work too.
I'm figuring that there's some deep-seated DLL or system association which ICS needs, which isn't configured if ICS is stripped out of the ROM - I ended up just reflashing with another ROM (the T-Mobile WM6.0 official ROM) and ICS and WMWifiRouter works fine.
Sorry that's not a solution, but it's the only way I could get it to work. Not an expert ROM cooker, so my knowledge of how ICS is stripped / included in ROMs is fairly limited, though I understand the concepts and techniques.
Thanks for your help Christopher.
I considered flashing a working ROM. My worry is about losing all the programs I have installed on the device (it took a long time to get it *this* customised ;-) ) is there any way to flash the new ROM while keeping the old registry entries etc. for registering my programs (Especially those I've bought such as Oxford Handbook of Clinical Medicine - which I cannot register anymore)? ...
Or could I somehow back up the registry and restore it later (I know that's likely to be a dangerous idea...perhaps simply the file associations and programs stuff -the windows mobile section?)
Thanks bro!
MrVarioII said:
Thanks for your help Christopher.
I considered flashing a working ROM. My worry is about losing all the programs I have installed on the device (it took a long time to get it *this* customised ;-) ) is there any way to flash the new ROM while keeping the old registry entries etc. for registering my programs (Especially those I've bought such as Oxford Handbook of Clinical Medicine - which I cannot register anymore)? ...
Or could I somehow back up the registry and restore it later (I know that's likely to be a dangerous idea...perhaps simply the file associations and programs stuff -the windows mobile section?)
Thanks bro!
Click to expand...
Click to collapse
Bumping as no replies for ages
Anyone?
Bumping again as no replies for a week or so
Bumping again to ask if anyone knows a way of slving this without having to reinstall all my programs, re register them, and reconfigure everything? (which I suspect installing a different ROM will do?) is it possible to back up the registry entries for all of my programs then do the ROM upgrade and restore the registry entries from my other programsMost of my programs are installed on the microSD card anyway (i didn't want to use up the main memory and slow the device up).??
If so how?
Thanks again folks !
I have the same problem...
I cant seem to find the answer but will continue to try.
if your programs are installed on your memory card then chances are you should be able to past shortcuts into the programs directory after reflashing. I tend to do this BUT I have found some programs that need to be re-installed or re-registered. Backing up registries can cause SERIOUS problems in itself so I would 1st do a full backup of your system (try spb backup, it backs up EVERYTHING on the phone then re-installs the lot so it seems like you never had a problem..) then flash. Try putting on shortcuts and if you have no luck you have the choice to start again on the new os or reflash to old and then restore backup (old problems wil still be there). Hope this helps.
Ps. I use resco explorer instead of the crap file explorer on the phone. It allows MUCH more versatility to do as I want. Cheers....
Hi,
After a hard-reset I found wmwr_cprog.exe on my internal storage under programmes. Since I did a hard reset and thus thought this program wouldnt be installed anymore, I deleted the file, not knowing what it was for.
Now everytime I want to start my phone I get the message "The file 'wmwr-cprog' can't be opened. It isn't signed with a trusted certificate or one of the components can't be found. You might need to reinstall it or repair it if this problem keeps returning' (free translation from a dutch ROM).
What can I do and how can I do it. A quick answer is much appreciated since I cant make nor receive phonecalls and I am at work :-(.
Thanks in advance!!!
Solved
Posting the solution if someone else has or will have this prob in the future:
KB0808022: "The file 'wmwr_cprog' cannot be opened" error message after uninstalling WMWifiRouter
wmwr_cprog is an executable used to allow WMWifiRouter to work on devices that do not have actual voice capabilities, like the EM-ONE. Sometimes this application is not removed from the registry correctly when uninstalling WMWifiRouter, which can cause your phone to give you error messages.
To fix the error, you will need a registry editor, like PHM RegEdit (to use on your device itself) or MobileRegistryEditor (MRE) (to use on your computer and edit the registry over an ActiveSync connection).
Once you have launched your registry editor of choice, change the:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:MSCProg\1
entry from:
wmwr_cprog.exe
to:
cprog.exe
Close the registry editor, and wait two minutes - to make sure your device has saved the changes - and soft-reset your device. After the soft-reset, everything should be working as normal again.
Bartse said:
Posting the solution if someone else has or will have this prob in the future:
KB0808022: "The file 'wmwr_cprog' cannot be opened" error message after uninstalling WMWifiRouter
wmwr_cprog is an executable used to allow WMWifiRouter to work on devices that do not have actual voice capabilities, like the EM-ONE. Sometimes this application is not removed from the registry correctly when uninstalling WMWifiRouter, which can cause your phone to give you error messages.
To fix the error, you will need a registry editor, like PHM RegEdit (to use on your device itself) or MobileRegistryEditor (MRE) (to use on your computer and edit the registry over an ActiveSync connection).
Once you have launched your registry editor of choice, change the:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:MSCProg\1
entry from:
wmwr_cprog.exe
to:
cprog.exe
Close the registry editor, and wait two minutes - to make sure your device has saved the changes - and soft-reset your device. After the soft-reset, everything should be working as normal again.
Click to expand...
Click to collapse
thx problem too
DOWNLOAD LINK:
http://rapidshare.com/files/232362616/OnTheRoadFix.zip.html
http://www.megaupload.com/?d=NW8YZSLV
Instruction Inside
NOW LENGTH OF PATH IS UNLIMITED
Sounds great, but I can't access the link.
Any chance of getting this to work for tomtom?
Thanks
or iGO8?^^
you must say me
1. preferred file hosting
2. full path to program, ex: "Garmin\Garmin Mobile Xt.exe"
or "StorageCard\Program Files\TomTom\TomTom.exe"
and for automapa.. ?
Can You make one for polish people too ?
1) rapidshare or megaupload (http://www.megaupload.com/)
2) "Storage Card\AutoMapa EU\AutoMapa EU.exe"
thanks You very, very much in advance!!
P.S. the link from 1st post does not work..
may be it will work for Garmin
http://www.megaupload.com/?d=335BJ0QD
automapa and other can be done in 14:00-15:00 or evening after 19:00 GMT+2
because now i not at home : )
I tryed to improove code, but it has some limitations
path must be no longer that
\Wayfinder\Wayfinder.exe
i'm trying to find another way, but....
Does not seem to work. Garmin does show up under default navigators, but it cannot be selected, it goes back to google maps.
you make Garmin.exe as alternative file name?
Garmin folder in main memory?
Yes, I just copied Garmin Navigator TX to desktop, renamed to Garmin.exe, copied back to main memory. It shows up in the default navigators screen, but when I click on it, the selection panel simply closes and GM stays a default.
hmmm
i hav NOT installed GM
so may be try to rename googlemaps.exe in xxx.exe or about
and try again...
Still no luck. I renamed GM, and it no longer shows up in the panel. However, it would still not allow me to select Garmin, just would not open anything when I click Navigation. I guess there is smth different in my X1.
so lets check
if renamed then not seen
so you have right tune up garmin.exe
i have Uninstalled Wayfinder and Googlemaps...
may be uninstalling of GM will help
and if so, you can install GM again and see what happens...
Still no luck. I renamed GM, and it no longer shows up in the panel. However, it would still not allow me to select Garmin, just would not open anything when I click Navigation. I guess there is smth different in my X1.
No, that's not it. Uninstalled GM and Wayfinder, softreset, still does not work.
very suspictious....
may be any one also try to test
and then i could compare
ok mate let's do it together. but I am a noob ;(
if that is not a problem for You we can try with automapa. what do I need to do/prepare?
mayyhem84 said:
ok mate let's do it together. but I am a noob ;(
if that is not a problem for You we can try with automapa. what do I need to do/prepare?
Click to expand...
Click to collapse
path must be no longer that
\Wayfinder\Wayfinder.exe
for example
\Storage Card\AM\AM.exe
or
\AutoMapa\AutoMapa.exe
it is easiest way, i think...
done
ok - so it is
\Storage Card\AM\AM.exe
what now?
mayyhem84 said:
ok - so it is
\Storage Card\AM\AM.exe
what now?
Click to expand...
Click to collapse
try this
http://www.megaupload.com/?d=XLOZDURZ