Need help! - MDA II, XDA II, 2060 General

Hi, have a problem on my xda2, my screen keeps on blinking and flickering, its like there's a cricket sound. my speaker also does not work.
it just happend while i was playing.
can you help how to resolve it or do you know any tech person that diagnose or repair it.
thanks.
den

my unit was fixed already, they said that its the mainboard that has a problem, and it will cost 35 thousand pesos if there's no warranty.
i'm just curious, can anybody tell what causes this problem.
according to the repair center, it can be cause by a corruption of a file or the rom (is it rellay possible?)... or if the unit is inside a tight pocket always.... or the unit was wet by moisture.
guys, i need your inputs before i do something with my unit, just confused a bit coz i want to upgrade my xdaII himalayan to wm2003se by xda2jojo version.
thanks in advance

I would try hard reset and removal of battery first. If that doesnt help I would flash with a standard rom.

flash it with 1.72.00 WWE original ROM,try it since u have nothing to loose(u already have no warranty) :wink: ,then if the problem persists,take it to the service center(if it's a hardware issue)....good luck

Related

please help, headset dead?!

My MDA Compact was dropped to a floor from like a 0.5meter height and it had crystal "cover" on it which SHOULD protect it from breaking.
but now the headset is dead. i mean the phone works and i can send sms and call and everything and screen is normal but i don't hear anyone when i call or when i'm called!
what to do? software problem or hardware? is it really so weak phone? i can't belive...
Try using your earphones to determine whether this problem is due to a wrong contact in the speaker or a software problem.. if you can hear sounds while using your earphone.. then 90%: the problem is with the contact of the speaker it self.. this is a common problem with all magicians even if you don't drop it !!
any way.. if you are skilled enough, you can open you magician and solder the loose contact... I wouldn't suggest that thought, since it will void the warranty..
you can send it to your operator and tell them this problem happened out of no where.. if you like :wink: and they should repair it for free..
if you can't hear anything while using the earphone... then you HAVE to send you unit to your operator or any service center....
a hard reset might or re-flashing might help if this is a software problem, but it's very unlikely to be.
best wishes
its a hardware problem, tested.
i'll try to ask them to repair it for me but due to its visible cracklings (the mirror is broken :? ) i'm afraid they wont repair it for free although the phone is old 3 months and i got the warranty
if i go then on solution by repairing it myself, where can i find screws and which ones to unscrew not to demolish the whole phone
thanks

Defective Unit? Pls advise

Hi Guys!
My TyTn is acting strangely. In use, the display is first pixelating, getting lines (noise pixels as well), and then fading to completely white. When so it doesn't responde to anything anymore. So a soft reset is needed.....
Also the ringtone when called, is 'out of tune', like a old record player when you push your finger on the record.. LOL
Before I send it back to have it fixed by HTC, do you guys have any idea whats wrong, and maybe even a tip to help me fix this myself?
Tried numerous soft resets, hard reset, and a reinstall of the original WM6 rom (in Dutch).
Did not install any new programs lately, or did change anything on the unit...
Don't want to miss my TyTn... so hate to send it away... as many of you I am hooked badly to my beloved digital companion
Greetzz Antal
It acts like hardware incompatible.
How about flashing with WM6 English version.
I don't think it is software problem.
I agree, not likely to be software. It did not get dropped or take a knock did it?
The two issues of pixelation/white screen may, if you are lucky, just be a connector thats loose. The sound I think is unrelated but again sounds like a poor connection at the white rear speaker connector block - not uncommon.
Both of the above could be caused by a sharp knock. There have also been cases of poor battery connections causing problems.
If you have a warranty use it. If not you can follow the dismantling guides or service manual to dismantle - check connections and re-assemble. Be prepared though, that sending it in might still be required!!
Mike
Will send it in
Hi Guys, Thanks fr your replies.
I will take the unit back to the store today.
I am not aware that I bumped it, or neither it has dropped. May be a connection that was allready quite loose to begin with. Lets see what HTC and the store will tell me
Strange thing is, that without my sim in it, and not using it, it stays normal... Have put it aside, and used a very old phone instead, and it is still normal..
Antal said:
Strange thing is, that without my sim in it, and not using it, it stays normal... Have put it aside, and used a very old phone instead, and it is still normal..
Click to expand...
Click to collapse
Mmmm... that's important information and changes things a bit. Could be a sim card contact or something about the sim. Anyway it tends to suggest that other thoughts about hardware issues may not be correct!
Hope you find the answer at the store.
Mike

Problem with screen

I have a problem with the screen on my wizard...
When I close the screen, the characters appear with wriggly lines in them, as if they are breaking. If I slide the screen open, even just a little, the characters are stable.
Any ideas?
It seems more like a Hardware fault the software,but no harm confirming.The 'Digitizer' of the Lcd is faking out or connection problem of the connectors,did you disassemble the device recently or something for repairs,or did it fell on the ground and got damaged.
Which OS version Rom your are using,if you have upgraded to any custom Rom,may be,I don't think so,but might be there's a chance,reflash the Rom again and check if it helps.
cheers
I flashed the rom & reinstalled the OS, but still the same problem. So it looks like a hardware problem.
Probably some connector cable or something.
Are these difficult to open, or should I take it somewere to get it fixed?
Well, if it's still under warranty,then I'll suggest you contact the vendor from whome you got it and let them fix it,otherwise,if you got any experience and knowledge of disassembling and repairing it,then download the service manual from the vendors website or from the xda-forum wiki and try out.Otherwise consult a repair shop.
Cheers
Well, I got a manual for the wizard, openned it up, tightenned all the connectors & cables, and now it works like a charm!!
Thanks for the replies.

Everyone please help me....

i have a Swisscom XPA v1605 (htc tytn), and i had wm6. On wm6 I have problem with touchscreen on start button, a I hardreset the phone. After that my touchscreen does't work, and I can't calibrate screen and continue with starting up guide....What sould I do??? Someone answer PLEASE....
Reply
check that the front bezel is not dented and suppressing the touch panel around the sides, if not,,, you will need to replace the entire lcd...
also check if there are any objects( sand, pocket lint) stuck between the touoch panel and bezel.
I think, is there any posibility that the rom is false, becouse that phone should have wm5. Lcd is workin fine , but I can click on calibration. was I mentoned that the phone was wokin fine before that happen.(HARDRESET)
Try reflashing the ROM, I had a similar issue where it just stopped working and re flashing was the only cure.
how I do that? sry guys ,but I am brand NEW in this thing.....
Did the device come from Swisscom with WM6? If so your probably best contacting there support about it, they may be able to give you the download location of the rom. If not try reading MR Vanx's upgrading guides on here which will walk you through flashing the device. http://forum.xda-developers.com/showthread.php?t=299462
thx man u r awesome............
No problem as long as you follow it through you should be ok.
Good luck

TouchScreen does not work - HELP PLEASE!!!

Touch screen does not work on my IMATE JASJAM , any clue please??
How to solve this problem , is that soft issue or technical issue..
Please helP!!
THANKS IN ADVANCE
if it still does it after a hardreset it's a hardware issue
if its still under warranty, take it back. To change the lcd is pretty pricey and its so NOT worth the hassle of trying to change the touchscreen... If you need to fix then try ebay for screens or a broke phone. Got my new jasjam for $120 Australian and surprise, surprise, just a dud battery and camera module. Replaced from old phone and now it works fine...
Cheers...

Categories

Resources