Touch screen does not work on my IMATE JASJAM , any clue please??
How to solve this problem , is that soft issue or technical issue..
Please helP!!
THANKS IN ADVANCE
if it still does it after a hardreset it's a hardware issue
if its still under warranty, take it back. To change the lcd is pretty pricey and its so NOT worth the hassle of trying to change the touchscreen... If you need to fix then try ebay for screens or a broke phone. Got my new jasjam for $120 Australian and surprise, surprise, just a dud battery and camera module. Replaced from old phone and now it works fine...
Cheers...
Related
Hi, have a problem on my xda2, my screen keeps on blinking and flickering, its like there's a cricket sound. my speaker also does not work.
it just happend while i was playing.
can you help how to resolve it or do you know any tech person that diagnose or repair it.
thanks.
den
my unit was fixed already, they said that its the mainboard that has a problem, and it will cost 35 thousand pesos if there's no warranty.
i'm just curious, can anybody tell what causes this problem.
according to the repair center, it can be cause by a corruption of a file or the rom (is it rellay possible?)... or if the unit is inside a tight pocket always.... or the unit was wet by moisture.
guys, i need your inputs before i do something with my unit, just confused a bit coz i want to upgrade my xdaII himalayan to wm2003se by xda2jojo version.
thanks in advance
I would try hard reset and removal of battery first. If that doesnt help I would flash with a standard rom.
flash it with 1.72.00 WWE original ROM,try it since u have nothing to loose(u already have no warranty) :wink: ,then if the problem persists,take it to the service center(if it's a hardware issue)....good luck
Hi guys, my sister's Wizard is losing screen alignment after a few days. I've seen cheap digitizers for sale on eBay.
My question is, is a new digitizer the solution to this problem???
Thanks in advance....
It could be the solution to your problems or it could be the start of more problems. I'd suggest you clean all the dirt off the screen, even the bastard specs of dirt that gather under the edge. If this doesnt work try flashing a different rom and see if the symptoms persist. If your still having problems then you can assume your digitizer is faulty and pursue methods of replacing it.
I have just cleaned the screen using a microfiber cloth, that is supossed to pickup al dirt. After turning on the device the screen has lost alignment. Will test the new alignment for a few days before spending the bucks for the new digitizer...
Thanks a lot for your help...
Mine has been losing it since day one Still loosing alignment, but what I do is go to srat menu/setting/screen -> align screen and this solves the problem (temporarily though ). At first I thought this was due to imperfections of the original ROM, but I've had this problem with all the ROM installed, including XDA mobile 6.
okay
i had the same problem with my G3 8125 Cingular... and believe me, after months my ppc rest in local HTC repair service i decided to bring it in my hands, got the LCD from ebay (with TS included) and today i dissasembled and now its working everything so, i bet if u get the LCD+TS and change it, it will work correctly... wish u luck
bb
ps- im from europe, croatia
i have a Swisscom XPA v1605 (htc tytn), and i had wm6. On wm6 I have problem with touchscreen on start button, a I hardreset the phone. After that my touchscreen does't work, and I can't calibrate screen and continue with starting up guide....What sould I do??? Someone answer PLEASE....
Reply
check that the front bezel is not dented and suppressing the touch panel around the sides, if not,,, you will need to replace the entire lcd...
also check if there are any objects( sand, pocket lint) stuck between the touoch panel and bezel.
I think, is there any posibility that the rom is false, becouse that phone should have wm5. Lcd is workin fine , but I can click on calibration. was I mentoned that the phone was wokin fine before that happen.(HARDRESET)
Try reflashing the ROM, I had a similar issue where it just stopped working and re flashing was the only cure.
how I do that? sry guys ,but I am brand NEW in this thing.....
Did the device come from Swisscom with WM6? If so your probably best contacting there support about it, they may be able to give you the download location of the rom. If not try reading MR Vanx's upgrading guides on here which will walk you through flashing the device. http://forum.xda-developers.com/showthread.php?t=299462
thx man u r awesome............
No problem as long as you follow it through you should be ok.
Good luck
Hi, a few month ago I accidently smashed the screen of my Vario. I decided to buy a new screen so I found one on ebay and installed it in my phone, however when I switched it on all I got was a white screen, no logos, nothing. The touch screen still works as I can hear the sounds when pressing it.
I am now being forced to go to a shop to fix it but I dont really want to shed out money for other people to do. Anyone know what could be causing the problem and how I could fix it?
Thanks.
hi
dont do with ur self u must send ur set to any expert person for evoid any more problems in ur PDA
Recheck the Flexi cable with which screen is attached,may be its detached or not fixed properly or even can be faulty.
Hi to all,
I have strange problem with my Elf. My screen stopped responding and I thought that the problem is the digitizer. Hard reset didn't help. I ordered a new one and changed it. Unfortunately the situation remained the same. So I got the same working phone from a friend and decided to change some parts to find out where the problem is. The result is..
My front panel(with the new and after that with the old digitizer) connected to the working phone - not responding screen.
My phone connected to the working front panel - not responding screen.
I have no idea what to do. If anyone can help. Exclude the warranty.
There is a small battery on the motherboard. Does anyone know its functions?
I have a suggestion that it is something like cmos battery of the PC.
My idea is to remove it for a while and make new hardware initialization.
I am not sure about that.
I doubt that there is something with the touch screen controller(TSC2046). Is there any way to reset it?