Hey boarders,
I tried to look for a solution but nothing came up from the SE.
Recently i have access to a Qtek 9090 but i expierence the following, when i activated Wifi after a hardreset i can perfectly connect to the Network. But when i disconnect and want to access the same network again it doesn't work. I have to hardreset the Pocket Pc and then it is working.
Did anyone have the same problem and found a solution for it. The Qtek 9090 is a proximus collection device supplied through brightpoint and has 1.22 Rom version.
Peter
Related
Hi!
I got a major problem when i upgrading my Qtek1010 to PPC 2003..
It works really good until the machine goes on suspend or i try to reboot.
I can't get it to restart, it's like the "on button" is broken. If i press soft reset the machine boots up really fine OR if i open and close the sim card holder...
Does anybody have a clue over what's wrong? I have been trying to find the answer on the forum but with no luck...
/Mike
Have you KSE Truefax on your device?
Than this is the problem....
HTH
Stefan
hmm, another error..
Thanks for the help, the phone is working now, except for one thing.. GPRS!!
Vodafone has made som upgrade on GPRS so QTEK want's me to send the phone to service... There should be a way to solve this without sending the phone... Do you have any idea? Maybe it's the radio that needs upgrading?
do you have the right settings for vodaphone where you live ?
often you have to manualy setup such settings in connections after a rom upgrade
you can try search for which settings vodaphone use
I've tested different settings, but i don't think that's the problem. i think that i have to use the right radiostack or something like that to get it to work..
Please Help!! My head is about to explode!
I have upgraded my SPV M1000 with w2003 se Chinese version, which works well no problems with that. However, I Have Widcomm version 1.5.0 build 0801, now I can activesync to any of my PC also Pan network works fine.
My problem is I cannot connect my notebook to the SPV and use the GPRS modem.
I have seen that I have to put a extra command in at+cgdcont=1,”ip”,”orangenet”,””,0,0
When I try to connect it say hardware failure 692 connect though.
If I leave the command out it say’s it connects to orange username and password ok then disconnects me saying PPP error.
Can anyone help
Many thanks
Hi there
I am new to this forum, I have purchased an SPV m600 on Orange from ebay, and I was woundering if I can upgrade the rom to T-mobile Vario. Has this been done before and will it work. If not please can soemone let me know where I can get other roms for this device. I am a t-mobile users, and the phone keeps on freezing when I enable push mail.
Cheers
The vario is the wizard while your device as you know is a prophet. Attempts to put wizard ROM on prophet "as is" were made with WM 6 but the results were unusable.
Chances are you will brick your device completely.
But note this: you push-mail problem shouldn't require a ROM change. All orange customization is in the ext ROM so try hard resetting your device, the soft resetting just after you finish all the calibration and stuff so the ext ROM wouldn't install. Then get the proper connection setting for T-mobile and see if it works.
Thanks for your help, are there any other Rom's I can install on that device ie, Imate or XDA. This way I will remove all the Orange setting of the device.
I have entered all the t-mobile gprs settings on the device, but it still frezzes every so often, but everything works still the web and email. I am not happy with the device fall asleep for 30 sec or so.
Cheers
Try the forum search for the Qtek 2.20 WWE ROM! This ROM is in english and have no Ext ROM from a provider such as T-Mobile or Orange! I think this would help you!
You must setup the connection data after finish installing manually but this isn't a big problem!
spv m600
Thanks for you help, if you come accross the link then let me know. I will do some searching over the weekend.
Cheers
Hi @all,
I just upgraded to WM6. Now I have 2 Problems:
1. I can't connet to WIFI Hotspot
2. After Softreset and entering the PIN it says "No service" (but not all the time)
3. I am using Voice Command 1.6 but I dont hear the announcements through my Headset
Can anyone help?
Greetings
Peter
1. Depends on hotspot encryption (you can do this trick: turn on wifi trough wlan manager start-settings-connections-wireless lan, it will turn on and turn off by itself, then turn on wireless trough comm manager, it will start but it will not connect to any network, so turn it off from comm manager and turn it on again and if the encryption is supported it will connect)
2. This never happened to me, try to clean your sim card contacts
3. I had this problem with WM5 also but i not remember the solution, try to search the forums for one
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
linuxpete said:
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
Click to expand...
Click to collapse
did you upgrade the radio firmware? I had some issue's with the radio after wm6, I upgraded to 1.15 and all the problems where fixed...
Hi Datake,
It's the original ROM from Helmi. Where do I find the Radio-Update? How do I install it?
Thanks
Peter
NO services gsm, after soft reset
I don´t have apply rom radio update in my qtek 9090 (blue angel)...
My radio rom version is 1.06...
If I apply a soft reset, I lost my signal gsm...
After 2 tries (2 soft reset), the signal come back...
I have a problem when I try apply rom radio upgrade to 1.15.
(connection failed, after activesync is closed in my pc).
(PS: using upgrade_noID)
How can I proceed in this case ?
Help me guys... please...
Rodrigo
Qtek 9090 (blue angel) - WM6 R0 - radio rom 1.06
MS Activesync 4.5
Brazil.
i have a spv c500 from orange uk to unlock i install active sync4.5 and conect fone to pc it was conected and build partnership but wen i run in fone HTCUnlock-CVS den device didnt explored and give some problem to explore den i delete partnership from pc and tried but fail to explore.but wen i next day i conected the fone to pc it didnt made any partnership and gives the following error
wat should i do for this any idea?
same problem
any one can solve it
waiting
i had the same problem but found these guides to help me.
http://shadowork.net/soubor/2005/09/20/activesync.via.bluetooth.pdf to help set up the active sync
and http://spod.cx/blog/unlocking_orange_spv_c500.shtml to unlock the phone.
mine was on orange uk and now is working fine on o2UK
hope this helps and thanks to those who wrote the guides
Just says "Action cancelled"
I need a T-Mobile backup phone and tried to unlock my Orange C500 with this software.
I just get a screen saying "Action cancelled".
Is the software no longer functional?
I turned of my Firewall (M$ & Peerguardian) and I was linked to Activesync.
Can anyone help?
I just dealt with a similar problem unlocking an unbranded smt5600 for AT&T
I was having all sorts of active sync issues - which likely are a result of either:
a) device's activesync client not initializing
fix) Hard reset your device - this will reinstall a fresh version of the local activesync client. At very least this will require you to set up a fresh partnership
b) device is having USB problems
fix) if you are running wm5+, make sure to go to start>settings>connections> USB to PC (or whatever it's called) and uncheck the "Enable advanced network functionality" box
c) might be a host problem...
fix) any number of things. You've already started on the right path by disabling the firewall. I've read about many problems from people trying this on Vista machines.
Hope you figure it out!
Still no luck but trying.
Thank you for the help.
I even tried entering the IP address into IE still with no luck
I will try it on someone else machine.
I have a UK Orange SPV C500, running
Windosw Mobile 2003 v4.21.1088(Build 14217)
Radio Version 0
Operator: 4.1.1.4
Manufacturer: 1.1.1.91
Microsoft: 4.21.14217.0
No idea how to hard reset or update to a newer version.
It worked
Okay, It worked.
I tried it again and it worked perfectly (with both firewalls on)
I can only assume the site was down the first few times I tried it.
I am now happily using my unlocked SPV C500
Once I get my new phone back I'll be interested in updating the firmware now.