Please Help!! My head is about to explode!
I have upgraded my SPV M1000 with w2003 se Chinese version, which works well no problems with that. However, I Have Widcomm version 1.5.0 build 0801, now I can activesync to any of my PC also Pan network works fine.
My problem is I cannot connect my notebook to the SPV and use the GPRS modem.
I have seen that I have to put a extra command in at+cgdcont=1,”ip”,”orangenet”,””,0,0
When I try to connect it say hardware failure 692 connect though.
If I leave the command out it say’s it connects to orange username and password ok then disconnects me saying PPP error.
Can anyone help
Many thanks
Related
Hey boarders,
I tried to look for a solution but nothing came up from the SE.
Recently i have access to a Qtek 9090 but i expierence the following, when i activated Wifi after a hardreset i can perfectly connect to the Network. But when i disconnect and want to access the same network again it doesn't work. I have to hardreset the Pocket Pc and then it is working.
Did anyone have the same problem and found a solution for it. The Qtek 9090 is a proximus collection device supplied through brightpoint and has 1.22 Rom version.
Peter
Hi,
I have two problems with the ActiveSync 4.2.
1. Whenever I connect the USB to my SPV M3100, it gives me the following error message:
THE SERVER IS BUSY, SUPPORT CODE 85010017.
I had SPVs M500 and M1000 before but such a problem never occurred before!
2. I could change the Schedule Sync on the previous versions of ActiveSync but I can not change it in the new SPV M3100.
I appreciate if anybody can help me to solve these two problems?
Anybody any ideas?!!!
I had major problems with activsync, so at the end, I made a hard reset, installed activsync again, It works now, thank god.
I did that too. No diffrence at all! very strange it has not happened on any of my old SPVs! Please help if anybody can!
i cnt seem to be able to connect via activesync for some strange reason. It has been working fine but since yesterday when i connect my mda it just keeps saying "connecting".
Anyone got any ideas on how to sort this......i want it to work so i can flash my mda with wm6 or a different rom.
thanks in advance...
Try to switch the connection (bluetooth / IR / USB)
i would but i want to flash my mda and it cannot be done unless synced via usb
Since you are going to flash it, backup your phone and do a hardreset and try again?
I have a same problem. I connect my Charmer to my notebook and it work fine. When I connect my desktop the Charmer can't connect.
I found the problem. The Charmer try to request an IP address for the DHCP server but the firewall block the request.
Read this post:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
hello. a friend of mine has an imate jam and i have a kjam. he wants to connect his imate with his pc for gprs surfing on his desktop. can someone please point me to a tutorial thread that helps out with this problem?
thanks
Just install the modem drivers on the pc.
i have a spv c500 from orange uk to unlock i install active sync4.5 and conect fone to pc it was conected and build partnership but wen i run in fone HTCUnlock-CVS den device didnt explored and give some problem to explore den i delete partnership from pc and tried but fail to explore.but wen i next day i conected the fone to pc it didnt made any partnership and gives the following error
wat should i do for this any idea?
same problem
any one can solve it
waiting
i had the same problem but found these guides to help me.
http://shadowork.net/soubor/2005/09/20/activesync.via.bluetooth.pdf to help set up the active sync
and http://spod.cx/blog/unlocking_orange_spv_c500.shtml to unlock the phone.
mine was on orange uk and now is working fine on o2UK
hope this helps and thanks to those who wrote the guides
Just says "Action cancelled"
I need a T-Mobile backup phone and tried to unlock my Orange C500 with this software.
I just get a screen saying "Action cancelled".
Is the software no longer functional?
I turned of my Firewall (M$ & Peerguardian) and I was linked to Activesync.
Can anyone help?
I just dealt with a similar problem unlocking an unbranded smt5600 for AT&T
I was having all sorts of active sync issues - which likely are a result of either:
a) device's activesync client not initializing
fix) Hard reset your device - this will reinstall a fresh version of the local activesync client. At very least this will require you to set up a fresh partnership
b) device is having USB problems
fix) if you are running wm5+, make sure to go to start>settings>connections> USB to PC (or whatever it's called) and uncheck the "Enable advanced network functionality" box
c) might be a host problem...
fix) any number of things. You've already started on the right path by disabling the firewall. I've read about many problems from people trying this on Vista machines.
Hope you figure it out!
Still no luck but trying.
Thank you for the help.
I even tried entering the IP address into IE still with no luck
I will try it on someone else machine.
I have a UK Orange SPV C500, running
Windosw Mobile 2003 v4.21.1088(Build 14217)
Radio Version 0
Operator: 4.1.1.4
Manufacturer: 1.1.1.91
Microsoft: 4.21.14217.0
No idea how to hard reset or update to a newer version.
It worked
Okay, It worked.
I tried it again and it worked perfectly (with both firewalls on)
I can only assume the site was down the first few times I tried it.
I am now happily using my unlocked SPV C500
Once I get my new phone back I'll be interested in updating the firmware now.