Can anyone help me please i have a I-Mate pocket PC and a Aktronix Bluetooth GPS unit. The problem is that the GPS unit uses Com Port 8 to transmit and this port on my pda is already being used by serial usb.
the version of rom i am running is 1.72.00wWE
ExtROM - 1.72.800
You may want to try out Pocket Bluetooth (http://bluetooth.i-networx.de/index_e.html). It solved most of my Bluetooth connections problems.
Related
Hi, I have a brand new XDA Mini, but with Qtek S100 WWE Rom 1.12, and I bought a Bluetooth GPS, Xaiox NAVOne 2.0...
Bluetooth manager can see the gps without problems, but my Medion2004 Navigation Software says, no GPS is avaiable.
I've already read in the users manual, that GPS needs Com8.
As I see in Start -- Settings -- System -- Bluetooth settings, xda mini has Com5 for outbond port, and Com4 for inbound port.
How can I change ? No program is running, if I check.
Please, help me, thanks.
Nobody has a good idea ? I have already tried the Pocket Bluetooth Tools, it can give a solution, to change COM port 5 to COM port 8, my bluetooth gps requires this port.
BUT, this screenshot appears only a small moment (0,1sec) when I install NAVone2.0 gps...
I installed this gps 100 times, everything is the same.
Can you suggest me another bluetooth tools application?
The problem is simple, to change COM 5 to COM 8.
Thanks in advance.
You could try installing gpsgate from franson
http://franson.com/gpsgate/
change software!
I think you should try change software. I have tomtom 5 to my s100 and it works just fine..
Hi
I Got O2 Xda Wm 2003,tomtom 5,bt 77 Gps The Problem Is:
I Cant Stablished Contact With A Gps Cos I Got No Port
On Pda Bluetooth Setting.
On The Pda Setting I Got>bluetooth Setting>mode>on>off>
Discoverable ( No Ports As Com 2,6,9...)
And On Tomtom Gps Setting I Got,
Gps Is Connected To:
Infrared Port
Bt On Com6
Serial Cable On Com1
Com9
Com2
Serial On Usb.
How To Add Com Ports In My Pda
Tnx For Your Help
ITS WORKING 100%
I GO IT WORK
Hi,
I have the same problem - no virtual COM port - how did you make it ?
I tried every setting in TOM-TOM and nothing changed. Please help me.
TOMTOM AND GPS
The XDA II comes only with support for BT headsets and ActiveSync through BT. The serial port emulation is also a feature of the Microsoft BT stack but you need a device driver a register port and to handle it
AND ITSOCKET BLUETOOTH TOOLS
Hi all. I've used my Qtek with TOMTOM and a bluetooth GPS antenna for many time. Some days ago, the system don't run anymore.
The problem is in the Universal Bluetooth: I can find and add bluetooth devices but, when i use it, there is not communication. So, for example, i can connect my Universal with GPS antenna in the bluetooth section, but TOMTOM tell me that there isn't a GPS antenna. Also, i can link via bluetooth my Universal with the notebook, but i cannot start an Activesynk session via bluetooth: it tell me that no pcs are connected even if in the bluetooth list there is my pc and in the service list there is "activesynk" and it is activated.
Now, it is a software or an hardware problem? Any idea? I've anjlurned my software at the AKU 3.2 last italian ROM, but it didn't help.
Thanks in andvance for the help and sorry for my english.
Idum
UP
Pls help me. In what manner i can test if it is an hardware problem or only a software problem?
Idum
I have same problem ...
but still dont know the way how to fix
First
For TT to work with your bt gps you have to create a unsecured incoming port, take COM0 or any other number.
then it should already work in TT, if it not select in TT a GPS receiver and select com0
You have to create a com port for the BT connection and enable that com port in your AS on your pc.
To sync with AS over BT you have to select Connect with BT on your Device!!!
hi
i have the latest rom for my xda but i cannot get my bluetooth gps receiver to be seen , it will bond but it does not seem to find the com port , i have a holux 236 and i am running gps viewer:confused which scans the com ports , it used to find it but since a reboot it will no longer do so.
i have tried wm5gpsfix but it seemed not to do anything.
anyone any ideas
cheers
martin bell
[email protected]
I had the same problem but with WM 2003. Instalation of Widcomm Bluetooth Stack maked my GPS receiver visible for TomTom application. try that!
Hi, All. For a couple of days now I am trying to synchronize my O2 Neo with my PC per bluetooth. I am using a cheap bluetooth dongle, which comes with BlueSoleil software. When the devices find each other, the Prothet only recognizes a Serial Port connection. Than I assign outgoing port on the Prophet (I think COM6), I include COM 6 in the ActiveSync (4.2 by the way) settings and map COM6 to my prophet in the Bluesoleil settings. When I refresh the services on my Prophet I can again only see the Serial port connection. Can someone give a hint?