What does it do ?
Can we listen to the radio (FM) ? I dont see any option in my MDA compact.
Hee hee a radio rom is for your wireless telephone. It's the interface that helps your PPC connect to your provider to make phone calls. I can see where a newbie would think that heck it says Radio Rom
Related
I have upgraded to PPC2003 v 4.00.01 ENG from FTP..lycos.uk...and am very happy with the speed of the Qtek that has greatly improved. I have radio V. 3.19.01 that did not change with the upgrade ..Is there a better version of the Radio Stack?
If so where is the link? I use Qtek 1010 in Oman. ME
Ravi Radh
Hi,
my advice to you if your Radio is working fine with the upgrade dont change it.
Generaly the 3.19.01 was a good Radio version for QTEK when i upgraded to 3.23 i had problems in Lebanon. If ure device is working fine keep it like that.
:wink:
Hi,
Thanks for the advice @ Arzleb. I think its better to keep it going this way as its difficult to have a stuck QTEK with an improper Radio in it.
Its just that this version of Radio I feel has a falling signal strength!! Could be the OMANTEL GSM network too!!
Its too early to evaluate as I got 3.19.01 ver just a week ago
Thanks
Ravi Radh
Well Ravi i tried every RSU possible on the QTEK in order to track the signal problem which i also have in Lebanon. Currently i am using the o2 4.21 and i can assure u its the same as 3.19 & 3.23.
I think sometimes the signal bars arent always right! i will give an exemple sometimes the bars shows 1 or 0 and i could still receive a call. Dont always trust the bars but also that doesnt mean that the Signal is good and i dont think its the device's fault. U could blame the operator 50% and the device 50%.
Now what is happening with me is that the bars change very fast on the same Cell i mean they drop to 1 then go up to 4 very fast like crazy lights and also in places were the signal on other phones are full on my QTEK is 1 or 2.
Anyways as long as no one is telling you that we are calling you and ure phone is closed i think ure safe.
Salam bro
:wink:
Hello,
does any one have an executable file with the 3.13 version?
Thx!
Hi,
I have version 3.17 ROM and tried the 6.27 Radio Stack but got no signal/network at all, so I went to 4.21 and all is well again, except the GPRS disconnects when I take a call.
I wouldnt mind so much is my network (Optus-Australia) didnt charge me 20c each time I connect. Basically it means I pay for every incomming call, and an extra 20c for every outgoing call. I dont understand why they need to do that but I guess that greed would be the answer considering they charge me US$14,000 per gig of data transfer. (no not too many zero's there, its fourteen thousand dollars US per gigabyte of data transfer)
Back to the topic. I thought maybe the 6.xx radio only worked with ROM 4.00 etc, so I upgraded the ROM but found the killer-app for XDA (ICQ) wont install onto 4.00, so there was no point in that.
Does anyone know what versions of Radio Stack support the GPRS-on-hold feature? It looks like there is two different 'families' of Radio, 4.xx and 6.xx and mayby not compatible?
Any way to get always-on GPRS with a 3.xx ROM? I think 4.21 is the latest Radio in the 4.xx series ?
Either that or get ICQ to install on 4.00 ROM, and use 6.27 Radio maybe?
PS: I did see a version of a mesenger program that will work with ICQ on ROM 4.00 but it mentioned something about 'advertising' , and at $14,000 per gigabyte I need to give the advertising a miss for now
Regards
Scott
hi im using Qtek 1010 and she do not get any signal and i did use the http://lumpistefan.dyndns.org/ to flash the rom i have every think look good but still i cant have signal and im in Lebanon so please can some one provide me some help
you may get better results asking in the wallaby forum
this forum is mainly for wifi and GPRS networking not gsm networking
you may want to look at radiostack related stuff since if you flashed your device with a 900/1900 radio stack and your country use 900/1800 that would be the cause
Bluetooth Switches Off After a GPRS Session wether I have my Parot Ck3000 connected or not, any one had this at all ? I had heard that the Universal had a simular prob.
It happerns under any type of app and I have DK Today installed... I'm not sure if thats doing it or its just showing me as I cant find any documentation on it.
This may aso be a WM5 prob ? Just no idea.
Thanks in advance
Terran ( Tmobile UK ROM Version 1.06 )
Thought I'd start a thread where people can post there issues/bugs on ROM upgrade 1.35 and it will also help people to make an informed decision before upgrading to this ROM.
I have now used this ROM on my SPV M3100 for over several weeks and the only issue I have is when using my 3 network USIM the voicemail speed dial 1 does not work even after going through the settings or registry the bizzare thing is I don't get this issue with other network SIM i.e. O2, Orange or T-Mobile.
P.S. before someone says I may have a faulty 3 USIM, I did not have this issue prior to this upgrade.
Is the 1.35 Rom different from?:
http://forum.xda-developers.com/showthread.php?t=294927&highlight=issues
The HTC ROM 1.35 is different from the cingular ROM 2.06, it's supposedly the most stable of the ROM upgrades or so they say!
I haven't any issue, Radio & ROM 1.35 ... i've read someone has problems with messaging service...
Using a Task Manager ONE TIME only i've seen the Messaging Service stopped, just a reboot.
now works well, bt, wifi & radio
and what happend, when you try to change the very first contact on sim? I had similar problem, but on old nokia phone, not windows nor symbian.
gfreek said:
Thought I'd start a thread where people can post there issues/bugs on ROM upgrade 1.35 and it will also help people to make an informed decision before upgrading to this ROM.
I have now used this ROM on my SPV M3100 for over several weeks and the only issue I have is when using my 3 network USIM the voicemail speed dial 1 does not work even after going through the settings or registry the bizzare thing is I don't get this issue with other network SIM i.e. O2, Orange or T-Mobile.
P.S. before someone says I may have a faulty 3 USIM, I did not have this issue prior to this upgrade.
Click to expand...
Click to collapse
Would the HTC 1.35 ROm work on the Cingular 8525?
loud busy tone even if Phone is on loudness=0
i have some problems with this Radio 1.35.00.11. The thread is about that, isn´t it?
First of all my phone beeps loud out of the speaker at the back(the loud one for "free speaking") if the Person iam calling is not available (busy signal). Even if the Phone is turned to loudness 0! Iam not sure that the Radio Rom is responsible for that, because i reseted my vario2 completely. But iam sure that problem i never had before(with the german origninal Radio ROm).
*edit* iam currently reading that this is not a problem from the Radio Rom... The extRom may be responsible. Sorry!
But please help me the following Topic:short: is it possible to flash to an older RadioRom?
*/edit*
Because of that i wanted to flash the 1.27. Radio ROM to the Vario2. I took this one: ftp://xda:[email protected]_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe
The flashing procedure got complete without any error, but on the Vario iss still the 1.35.00.11! Isn´t it possible to flash to a older Rom Version?
Thanks for help!?