xda IIi stuck in boot loader mode can't connect to pc with activesync 4 can anyone help with re-installing original sortware
hard rest set it
try pressing down the power button and the reset button at the same time this will start the xda from scracth non of your stuff will be available if u do this...
tried reseting doesn't work stay's in bootloader mode
when my xdaII was stuck in bootloader mode i just put it in the cradle
and windows found it as some ms usb sync device thingy
and then i ran a rom upgrade and all was well...
Related
Hi all, I'm facing a bit of a problem here and really hope you guys can help me out. My Universal is no longer able to start up. Power, soft reset, everything doesn't seem to work.
Hard resetting it brings up the 0 to reset, X to exit screen. Upon pressing 0, it shows "Clearing memory" and then that's it, the phone does not boot.
Tried going into boot loader mode and connect to it using mtty but no luck. Phone goes into BL mode but I am unable to connect.
Plugging my USB cable to the device results in an unrecognized USB device, but the charging light does not go on. Edit: The word "Serial" remains there on the screen after plugging in the USB cable.
Just wondering if anyone encountered this problem before and if there's any solution to this?
Really hope to hear from you all soon. Thanks all.
here...
this is a tool that will allow you to exit bootloader mode (serial)
1. connect your device to the computer
2. wait ~30 seconds
3. run this tool and wait
4. when it's done disconnect your device and soft reset !
have fun !
dhob187 said:
this is a tool that will allow you to exit bootloader mode (serial)
1. connect your device to the computer
2. wait ~30 seconds
3. run this tool and wait
4. when it's done disconnect your device and soft reset !
have fun !
Click to expand...
Click to collapse
Thanks very much!
Hello,
this is what the problem is, the power button doesnt bring it back to life. i do a soft reset, it says press zero to clear, i do that it doesnt work. then i do a hard re-set and it shows 'serial', i plug in the usb and it changes to USB (think that's what is called the boot loader'.
now i ran teh exec official firmware, it managed to update it onces but after that i did a soft reset and it didnt come to life. i repeated that process again but this time the firmware didnt even manage to communicate with the device as it said unknown usb device. and then i got an error 101, connection error
any ideas whati can do to make sure it gets restored, i am really going nuts now!!
Same Problem
I am having the same problem with my 02 exec. My phone keeps on being in bootloader, I have tried mtty and I don't have usb connection. Hmm I have tried uni_exitbootloader ,but it tells me that it can not open my usb port. Which sucks. Truely and I am stuck. I am running vista. So I am stumped because I don't know what else to do.
Me too
I am stuck on bootloader page the one that says USB at the top and V1.00 at the bottom. I have Vista so can not use mtty or the other one. I have turned off the USB on Windows Mobile thingy from Vista like activesync. I can get the white screen to show O and X for either factory reset or exit. And I have tried the bootloader screen as noted above. So can anyone help?
i got it working for 2days and then when i was on wifi, it crashed again and wont start again, i get to serial/usb mode of bootloader and also to hard reset when i press 0 to clear everything. but then it doesnt start again.
i thought it was something to do with the battery so i put in a new battery but that still doesnt help.
can someone send me a link to mtty and what to use it. i shall give that a try again.
thanks
mines just still stuck
same im still stuck in boot loader wont budge from he bootloader screen with serial v1.00 on cannot connect via usb as the connection broken i use a extrunal battery charger and got serveral batterys any help yet?
I cannot connect Qtek S110 to pc in bootloader mode.
In regular mode magician connects ok, I see it in Device manager,
Activesync sycronize ok.
But when I go to bootloader mode, PC doesn't see magician.
When I connect USB cable, "Serial" on the magician's screen doesn't change to "USB", and device manager doesn't show device.
I disable USB connection in Activesync, even kill wcescomm.exe proccess.
Problem solved by removing SD card!
I can't connect to my PC while in the bootloader either (SD&SIMcard removed).
The bootloader screen, then fades out. I have to remove the battery, and reinsert it to be able to enter the bootloader again. I bricked the unit with a fulty ROM. Any suggestions?
Any suggestions?
I've upgrading using my SD card with no success.
mur466 said:
Problem solved by removing SD card!
Click to expand...
Click to collapse
Thanx dude, you helped me solve my problem (my scrren fades out to black when I enter bootloader)
I really hope there is somebody with insight about my problem with my Samsung Omnia b7610.
A while a go I wanted to flash my Omnia (original version 6.5 from Samsung site)
It wend wrong...
When I now turn on my phone and connect it to PC, I only see the Battery charging. When I turn the phone on I only see the SAMSUNG logo.
I remember that before I could see a picture of a phone connecting to a pc. But that picture doesnt come anymore. So I Cant flash the phone anymore.
Hard reset doesnt work.
I tried Octans. Detect device doesnt work.
I use Win7 installed drivers and I can see in System Management that under phones Samsung MIT's USB sync is installed. That's all the phone can do right now.
I hope somebody can help me. Is there for example a way to get into a bootloader menu like the HD2 phone?
Thnx,
http://www.modaco.com/content/i8000-omnia-ii-gsm-rom-discussion/294673/guide-to-flash-on-windows-7/
Try this flash tutorial for windows 7 x32
I used it for my flashings and it works.
One thing that you should verify is on the OCTANS or OCTANS MINI exe, the compatibility should be for Win XP.
After that if you have the drivers already installed, the phone should be detected after pressing "detect"
JUST PLUG THE PHONE AFTER PRESSING DETECT
if you don't do it it will start charging and does nothing
Thanks for reaction but...
real_life said:
http://www.modaco.com/content/i8000-omnia-ii-gsm-rom-discussion/294673/guide-to-flash-on-windows-7/
Try this flash tutorial for windows 7 x32
I used it for my flashings and it works.
One thing that you should verify is on the OCTANS or OCTANS MINI exe, the compatibility should be for Win XP.
After that if you have the drivers already installed, the phone should be detected after pressing "detect"
JUST PLUG THE PHONE AFTER PRESSING DETECT
if you don't do it it will start charging and does nothing
Click to expand...
Click to collapse
Tried this, and I also tried it on a XP machine now...
I think the problem is that I only see the Samsung logo on startup. I can remember that first I saw a picture of a phone connecting to a pc. It just stops at the Samsung logo...
Thanx for reply...
just get octans 2.14 download any rom from modaco
1 take battery out put it back
2 start octans chose pda (*.nb0)
3 thick skip os updating from movinand, erase nv pda , start download immediately
4 click detect
plugin the usb into the device (must be off)
then a few sec download will start.
Hi,
A friend of mine gave me his LG Spirit H440 with the boot error: Secure booting error
In his words he tried to update the software, the phone started to lag and after a reboot the error occurred.
The guy is simple user so installing custom recovery or rooting are out of the question.
Here is a video I made of the problem:
https://www.youtube.com/watch?v=fONioh6uNms
After removing the battery the phone starts for 2-3 seconds with Secure booting error and then powers off. After that it cannot start again until the battery is removed and then everything repeats.
I tried to connect it to the PC with Windows 8.1 and installed LG drivers, but nothing happens. It's not recognized.
Also tried to enter download mode with Vol Up and connecting the USB cable, but again it just displays the error and shuts down.
Is this soft or hard brick? I'll be grateful for any help and guidance.
Try to set it in "upload mode" and flash stock rom kdz
Sent from my LG-H440n using XDA-Developers mobile app
septix said:
Try to set it in "upload mode" and flash stock rom kdz
Sent from my LG-H440n using XDA-Developers mobile app
Click to expand...
Click to collapse
hey
how do i enter "upload mode"???
i have the same issue. please help.
dydbg said:
Hi,
A friend of mine gave me his LG Spirit H440 with the boot error: Secure booting error
In his words he tried to update the software, the phone started to lag and after a reboot the error occurred.
The guy is simple user so installing custom recovery or rooting are out of the question.
Here is a video I made of the problem:
https://www.youtube.com/watch?v=fONioh6uNms
After removing the battery the phone starts for 2-3 seconds with Secure booting error and then powers off. After that it cannot start again until the battery is removed and then everything repeats.
I tried to connect it to the PC with Windows 8.1 and installed LG drivers, but nothing happens. It's not recognized.
Also tried to enter download mode with Vol Up and connecting the USB cable, but again it just displays the error and shuts down.
Is this soft or hard brick? I'll be grateful for any help and guidance.
Click to expand...
Click to collapse
how did you solve this crappy error??
No I didn't manage to find a solution and no one was able to help me.
I returned it to my friend and he bought a new phone.
Sorry.
1. Power down the phone.
2. Connect USB cable to computer.
3. Hold Volume DOWN and insert the USB cable.
4. ??
5. Profit.
septix said:
1. Power down the phone.
2. Connect USB cable to computer.
3. Hold Volume DOWN and insert the USB cable.
4. ??
5. Profit.
Click to expand...
Click to collapse
im sorry for ignorance but FastBoot=Upload mode?
Same problem, is there a BOARD DIAG option for this phone?