Hello,
this is what the problem is, the power button doesnt bring it back to life. i do a soft reset, it says press zero to clear, i do that it doesnt work. then i do a hard re-set and it shows 'serial', i plug in the usb and it changes to USB (think that's what is called the boot loader'.
now i ran teh exec official firmware, it managed to update it onces but after that i did a soft reset and it didnt come to life. i repeated that process again but this time the firmware didnt even manage to communicate with the device as it said unknown usb device. and then i got an error 101, connection error
any ideas whati can do to make sure it gets restored, i am really going nuts now!!
Same Problem
I am having the same problem with my 02 exec. My phone keeps on being in bootloader, I have tried mtty and I don't have usb connection. Hmm I have tried uni_exitbootloader ,but it tells me that it can not open my usb port. Which sucks. Truely and I am stuck. I am running vista. So I am stumped because I don't know what else to do.
Me too
I am stuck on bootloader page the one that says USB at the top and V1.00 at the bottom. I have Vista so can not use mtty or the other one. I have turned off the USB on Windows Mobile thingy from Vista like activesync. I can get the white screen to show O and X for either factory reset or exit. And I have tried the bootloader screen as noted above. So can anyone help?
i got it working for 2days and then when i was on wifi, it crashed again and wont start again, i get to serial/usb mode of bootloader and also to hard reset when i press 0 to clear everything. but then it doesnt start again.
i thought it was something to do with the battery so i put in a new battery but that still doesnt help.
can someone send me a link to mtty and what to use it. i shall give that a try again.
thanks
mines just still stuck
same im still stuck in boot loader wont budge from he bootloader screen with serial v1.00 on cannot connect via usb as the connection broken i use a extrunal battery charger and got serveral batterys any help yet?
Related
Can the experts explain this one or sugest a solution???tryed to flash the new rom on to my beloved xda......the rom was the latest "1933.18533_Thingonaspring.ROM.v3.2" but when running the flash the strange messaged showed up......error flashing rom...from there onwards the device is not recognised on my pc...Have tried in my laptop with the same result....any clues???
many thanks.....
long live buzzzzzz
Try to uninstall the ActiveSync, restart PC and reinstall ActiveSync again.
On your Uni, go to bootloader, will display Serial, plug in USB Cable, will display USB. Run NOID flash program to reflash your Uni.
If still can recogniced your Uni, pls try to change other USB port or other PC (Win XP).
I think I have nice paper weight
Have tryed to get the uni in boot mode but it shoes balck screen with no boot mode at all.have also tryed on my laptop but as soon as I plug it in it say device not recognised..I did try to recover from a bad flash but with no luck..
Cant think of any more solutions.........
Go to the HTC offical site and download an offical rom for Universal.Go to bootloader and get connected to your PC,no matter it is recogized or not,run the exe file you just downloaded,it will flash the rom in your device.When upgrading finished,power on ,and you may flash any rom you like to your device now.
It might useful to get a fully charged battery and to try going into bootloader mode, if that fails, then you your best bet have to send it back to your vendor to get it repaired
thats the problem.....
thats the problem...cant get the uni in bootmode....I do press light+power+reset and the screen is dead....tryed to charge the baterie just in case but the light on the uni starts to blink red and thats it.......I'm getting the impression that the uni became a paperweigth......sadly.....
I think should empty the battery, try to charge your battery over 12 hrs or borrow other people battery to test can go in to bootloader mode or not ?
If can go, try to check the USB Connection at your Activesync and than to flash, or try to uncheck the USB Connection at your Activesync and than flash.
My Uni also same like this problem before, my laptop got 2 USB port. 1st port i try the above mention, still cant recognized my Uni. So i try 2nd port, and Uni was recognized.
done it all....no joy
have done all that sugested but still no joy..I think that during the room flashing a power supply problem on the pc caused this....could it be that the uni became a paper weigh due to the room flashing ???If there was a power supply problem.....Is there anyway to recover the uni from a bad room flashing???
I've got a couple of strange problems with my mogul - anytime I need to reset it, it goes into bootloader (both soft and hard resets). However, If I connect it via USB to my pc, the reset will work.
The second problem is a USB connection to the PC only charges the mogul, the pc doesnt actually recognize it (it doesnt give the windows device connection sound)- so i cant flash it to try and solve the first problem. It also isn't recognized when I plug it into USB while in bootloader mode, I just get the "Unrecognized USB device" error in XP and Vista on two different computers. It might be worth noting that I get the USB device connection sound when i reboot the phone, then the "unrecognized usb device" error, then the disconnect sound as the boot finishes and windows mobile loads. I've tested the cable with other devices and tried multipile cables, so I dont think thats the problem
Any suggestions?
Ok, I got the USB working but nothing will keep it from going into bootloader on reset if it isnt connected to my pc. I've reflashed and hard reset to no avail. no one has any suggestions?
I had this same problem w/ my fiance's mogul... as far as i know there's nothing you can do but take it to sprint and get a replacement... and just as an fyi.... i never modded her phone... it was completely stock!
With no warning, my phone froze today (it's done it a few times, but a soft reset's fixed it) and nothing, including a hard reset, seems help.
I can get into bootloader and hard reset screens, however it gets 'stuck' on the Orange splash screen. The numbers in the corner flash up for a split second and then disappear.
I haven't been flashing ROMs, I just picked it up and it stopped working. I have tried the instructions here (http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery) but the computer can't connect to it (both with Active Sync on or off and Active Sync USB connection on or off)
Can you make any suggestions?
Thank you!
When you go into bootloader, do you see USB on the screen? Wot are your IPL and SPL?
Im surprised flashing with Jesterz did not work, that was my first step in recovering mine and it worked
When you tried this, did you unplug all other usb from your PC? try another cable? sounds daft but only one usb port out of 4 worked for me. Give some more info on what you did and what happened?
Okay, so I've already done a quick search of the forums and haven't found a situation close enough to mine to remedy my problem.
I was trying to update my ROM. I was flashing it when the progress bar stopped around 13%. After that, When I tried recovery, it seemed to stop detecting the phone at all. That is when I started looking around for other fixes.
Phone will start up into boot-loader(the tri-color screen), which shows
HERM100
IPL-1.03
HERM100
SPL-1.11
Now the main problem is that none of the updaters work because my computer cannot even detect that the phone is plugged in. When I try to plug it in, the computer shows "Unrecognized device". I use Windows Home Premium.
I've also tried MTTY. There is no USB option from the dropdown menu. I've killed Windows Mobile Device Center before trying this option.
Help me guys! What should I do?
http://forum.xda-developers.com/showthread.php?t=420135
see post 6 and later
I have a PPC6800 with US CELLULAR. I have never done any rom updates whatsoever. Earlier today my sound was acting funny as it does sometimes so I did a soft reset of my phone. It brought me into the bootloader screen where it says:
TITA100
SPL-1.07.0000
CPLD-9
and Serial at the bottom or USB if I plug in the USB cord.
If I plug in the USB and reboot my phone works as normal but if i disconnect it and reboot its back to the bootloader. I have used titan_exitbl.exe and it works of course until I reboot without the USB plugged in. Why would this be happening and how could I remedy the situation. Seems simple as everything works fine when I boot up with the USB plugged in.
Thanks for any replies.
Brandon
You are having a hardware failure. Time to get it replaced.
I had that same issue, eventually after upgrading it stopped. Hasn't done it in over 8 months now.
rcaryl said:
I had that same issue, eventually after upgrading it stopped. Hasn't done it in over 8 months now.
Click to expand...
Click to collapse
How did you upgrade it?
I have mine stuck in the bootloader. But it has SPL-2.06.0000 CPLD-9 . My phone locked up while I was trying to use it as a modem and reset it with the usb cable still pluged in and got the rainbow screen. Whenever I tried to reset it or hard reset, it would show a screen for a split second that said No image found. I have since then flashed it via the SD method and the USB method with two different sprint roms. The newest one on the HTC site and the last one. I also used the boot exit program and that doesn't work.