Related
I really hope there is somebody with insight about my problem with my Samsung Omnia b7610.
A while a go I wanted to flash my Omnia (original version 6.5 from Samsung site)
It wend wrong...
When I now turn on my phone and connect it to PC, I only see the Battery charging. When I turn the phone on I only see the SAMSUNG logo.
I remember that before I could see a picture of a phone connecting to a pc. But that picture doesnt come anymore. So I Cant flash the phone anymore.
Hard reset doesnt work.
I tried Octans. Detect device doesnt work.
I use Win7 installed drivers and I can see in System Management that under phones Samsung MIT's USB sync is installed. That's all the phone can do right now.
I hope somebody can help me. Is there for example a way to get into a bootloader menu like the HD2 phone?
Thnx,
I have the i920 omnia...
I have seen similar problems posted by others,Try Octans again.
Set up Octans to flash a new rom, I realize that Octans sets up diffrently for your phone, diffrent from the i920.
select detect if the phone does not start to flash unplug usb for a second or 2 then replug in. MAYBE this will help the detect process.
Worth a try any ways....
Hello,
If your computer doesent detect your phone you probably need to reinstall the usb drivers to your computer. And with that make shure to install the correct ones for win7, because if you dont you have a even bigger problem.
Hi.
Try this, if not tried yet.
i have been doing many ROM flashings on my b7610 (UNDER "WINDOWS XP").
The procedure goes like this (for me):
Switch off your phone (if not so, remove the back panel, take out the battery and place it back).
Open octans (whatever version), drag and drop the desired rom file onto octans
press the detect button (while the phone switched off and not connected to USB)
After pressing detect button, plug your phone to the usb connected to your system
Phone will get detected
Then press start download button.
This is the process in which I flash my mob.
If you already know this, please disregard my message.
{FYI-I have faced worse situation that this-Couldnot even see the logo or anything- the phone was completely dead for 2-3 days. At last something sparked in my mind - the problem was i lost my boot files- so i d/l'ed it and flashed it successfully with octans 2.14 with four different files - now i feel my phone is better than b4. FYI}
BOL.
I'm trying to revert back to stock on my Epic. I previously flashed using Clockwork and wanted to try Odin this time around but when I put the phone into Download mode my computer doesn't recognize the device. I've tried multiple cables and USB ports including one on the board itself. I am using Windows 7x64 and have the 64 bit samsung drivers installed properly. If I do a battery pull and boot the phone normally the computer recognizes the phone no problem.
Any ideas?
ghsthntr said:
I'm trying to revert back to stock on my Epic. I previously flashed using Clockwork and wanted to try Odin this time around but when I put the phone into Download mode my computer doesn't recognize the device. I've tried multiple cables and USB ports including one on the board itself. I am using Windows 7x64 and have the 64 bit samsung drivers installed properly. If I do a battery pull and boot the phone normally the computer recognizes the phone no problem.
Any ideas?
Click to expand...
Click to collapse
I was having a similar issue with my MBpro, nothing would recognize my phone. Tried it on another comp and bingo. I think stuff is just finicky with USB ports. Lame-o.
ghsthntr said:
I'm trying to revert back to stock on my Epic. I previously flashed using Clockwork and wanted to try Odin this time around but when I put the phone into Download mode my computer doesn't recognize the device. I've tried multiple cables and USB ports including one on the board itself. I am using Windows 7x64 and have the 64 bit samsung drivers installed properly. If I do a battery pull and boot the phone normally the computer recognizes the phone no problem.
Any ideas?
Click to expand...
Click to collapse
when did u plugg ur phone in dowload mode?
try this ... load odin ... turn ur phone off!!! plugg it to the computure so when u see its charging for 30 sec. Then put the cellphone into download mode... and that should work
maldito.boss said:
when did u plugg ur phone in dowload mode?
try this ... load odin ... turn ur phone off!!! plugg it to the computure let it charge for 30 sec and the put it into load mode... that should work
Click to expand...
Click to collapse
Yea...this post made my brain hurt...and of course didn't change anything...but..thanks?
Here's another piece of info that may help nail down the problem...
Odin is able to see the phone if I boot into Clockwork recovery mode but because clockwork is up the phone can't receive a flash but Odin does see the phone with no problem. It just still won't see the phone when booted into download mode.
ghsthntr said:
I'm trying to revert back to stock on my Epic. I previously flashed using Clockwork and wanted to try Odin this time around but when I put the phone into Download mode my computer doesn't recognize the device. I've tried multiple cables and USB ports including one on the board itself. I am using Windows 7x64 and have the 64 bit samsung drivers installed properly. If I do a battery pull and boot the phone normally the computer recognizes the phone no problem.
Any ideas?
Click to expand...
Click to collapse
I use windows7 64 too. I encountered tons of problems when trying to flash my epic. first my computer doesn't recognize my phone in download mode. after i wipe out all the drivers and reinstall them. finally i get my computer recognize it under download mode, but Odin froze every time during the flash.
Finally, i tried on another desktop computer with windows XP. Everything went perfectly. So maybe you should try that too.
I cannot connect to my Epic in download mode on mac os x either.
I was trying to install a lag fix, and now all my phone will do when powering on is show switch between the normal Samsung screen, and another reading "Samgung GT I9000".
I can still boot into Clockwork Recovery. But OS X will not recognize my phone.
Either that, or Heimdall isn't recognizing it and won't let me flash.
Help! Any ideas?
Pirate-M.Lifnen said:
I cannot connect to my Epic in download mode on mac os x either.
I was trying to install a lag fix, and now all my phone will do when powering on is show switch between the normal Samsung screen, and another reading "Samgung GT I9000".
I can still boot into Clockwork Recovery. But OS X will not recognize my phone.
Either that, or Heimdall isn't recognizing it and won't let me flash.
Help! Any ideas?
Click to expand...
Click to collapse
Really!?! No one has any idea? Please guys, I'm just sitting here with a broken phone, there must be a way for me to fix this.
Pirate-M.Lifnen said:
Really!?! No one has any idea? Please guys, I'm just sitting here with a broken phone, there must be a way for me to fix this.
Click to expand...
Click to collapse
I had the same problem, I couldn't connect it to 3 of my pc's. 2 xp's and one windows 7. Turned out the port on the phone it self was broken, had to take it sprint and get it replaced.
Pirate-M.Lifnen said:
Really!?! No one has any idea? Please guys, I'm just sitting here with a broken phone, there must be a way for me to fix this.
Click to expand...
Click to collapse
If OS X isn't recognising your phone it's likely your phone has the buggy secondary bootloader. Samsung corrected the bootloader for at least the GT-I9000 JPA firmware but I'm unsure if they have done so for other devices or firmware releases.
Unfortunately the only solution then is to use Windows or Linux. If you don't have access to a system running either of these OS then I recommend downloading a 64-bit release (assuming your PC has a 64-bit CPU) of Ubuntu, then you can download the Heimdall binaries from my website and use it to recover your phone.
i had an extremely similar issue as to what you are having. I have 3 win 7 machines and 1 xp, none worked. I went to a friends house he has 2 win 7s and an xp also didnt work. I did a general search and found all kinds of crap. One dude something about using his chicks blackberry usb cord and suddenly it worked on any and all of the machines it had previously not worked. so at the time im reading this on my chicks laptop which has a damn blackberry cord attached to it chargin her evo(go figure) ... anyway u didnt need the whole story but i have nothing to do right now.
Point is everyone says try different cords, i say try the damn blackberry cord if you happen to have one or a friend that has one.
Benjamin Dobell said:
If OS X isn't recognising your phone it's likely your phone has the buggy secondary bootloader. Samsung corrected the bootloader for at least the GT-I9000 JPA firmware but I'm unsure if they have done so for other devices or firmware releases.
Unfortunately the only solution then is to use Windows or Linux. If you don't have access to a system running either of these OS then I recommend downloading a 64-bit release (assuming your PC has a 64-bit CPU) of Ubuntu, then you can download the Heimdall binaries from my website and use it to recover your phone.
Click to expand...
Click to collapse
Is it the hardware on the Macbook pro itself? or just the OS? in other words, If I were to partition my macbook with ubuntu would that work with heimdall? would it be able to recognize my phone while it's in download mode as opposed to OSX, which couldn't...?
ldartez said:
Is it the hardware on the Macbook pro itself? or just the OS? in other words, If I were to partition my macbook with ubuntu would that work with heimdall? would it be able to recognize my phone while it's in download mode as opposed to OSX, which couldn't...?
Click to expand...
Click to collapse
In this particular instance Apple haven't done anything wrong at all, both their hardware and software is fine. The issue is that Samsung are distributing secondary bootloaders that aren't complaint with the USB specifications.
Whilst that is annoying, the good news for you is that you can simply install Linux (Ubuntu etc.) or Windows on your Macbook and you'll be able to flash just fine.
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
do you have tried to start and hold volume button... than connect to usb and simply install a stock rom (for example from your provider) - this must work... if not - you have bigger problem.
muhanad said:
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
Click to expand...
Click to collapse
Answered so many times. turn your phone off then turn it on "while holding volume down.It will then take to bootloader(rainbow screen).It suppose to have a cotulla written above the rainbow screen.Now flash it with a stock rom came from HTC site..No need to sync your phone to your PC..Just flash it..Start all over again..Now you can search before doing somehing with your phone.If that didn't help you. You have a bigger problem..
Yes I tried this also but it doesn't work.
What didn't work? Can you boot into bootloader - ie switch off, press and hold vol down button and switch phone on.
You should then boot into a multi-coloured screen and should see "serial" at the bottom of the screen.Then connect device to usb port (preferably one at back of your pc and a different one that you haven't used before if possible) - let the drivers install if applicable - does "serial" change to "usb"?
Do wat d above posters have suggested then try different usb ports or even a different windows pc...For all we know, your usb cable might be faulty....Also did u perform HARDSPL before anything else?
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
try plugging the phone into a different USB port it should work then...
Tried that all day and it said couldn't install drivers, then just tried the same ports now and its worked. I think it was mobile device center had 2 set-ups for my phone, i deleted the older one and all seems fine now.
This is crazy, now i'm stuck on magldr and won't find usb.
I'm leaving nand now cos i'm close to smashing my phone to pieces, magldr usb flasher will not find the connection no matter what i try, so i'm staying with ****ty windows mobile. Not happy but i've been trying for days now.
Smoke74 said:
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
Click to expand...
Click to collapse
I am experiencing this exact same problem. Bootloader wont recognize the USB stays in SERIAL. Tried different ports, cord is fine. What is the problem.
Before this, my HTC HD2 would just hard reset on its own ONCE A DAY! Why was it doing this?
Now it gets stuck on the white HTC loading screen. Wont get passed it. I used to be able to hard reset by doing the volume keys down and reset but NOPE... still wont load past that white screen.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
h.nocturna said:
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
Click to expand...
Click to collapse
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
taha23 said:
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
Click to expand...
Click to collapse
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
h.nocturna said:
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
Click to expand...
Click to collapse
Ok... i rebooted into Normal mode, downloaded the utility, did a search for "HTC" found nothing, did a search for "HD" found nothing. So i am now installing windows mobile center for windows 7 which should have the appropriate drivers.
Install Windows mobile device center 6.1, problem solved.
Sent from my HTC HD2 using XDA Premium App
I'm able to view through USBDeview that my HD2 is connected, however I'm unable to view/open it.. I screwed up by naming the 'temp' folder to 'copy_to_sd_root'..
The instructions confused me. I figured this was the folder that needed to be copied to the sd root... however when i rebooted the phone, I was unable to access it. Any recommendations?
SOLVED
I was overlooking the USB Flash option.
If you are still having problems, let your phone turn on(no multi-color screen), select: USB Flash, click the DAF.exe installation file, follow the prompts.
You're done.
I had this problem and I solved it disabling an option in activesync. I can't remember what was exactly the checkbox, but was in "options" and it said something like "allow usb connections" or something like this.
I just disabled it and rebooted the device holding volume down.
Good luck!
Make Sure Phone is not connected to PC
Goto cotrol panel in windows
Uninstall HTC BMP USB Driver
Uninstall HTC Driver Installer
Uninstall HTC Sync
Unisntall Windows Mobile Device Center
Restart the PC
start the phone holding power and vol dn and now connect the phone to PC. should detect and install the drivers and you should be able to see USB on phone screen.
if this does not work
Delete all the USB root HUB but keep as last option in device manager.
PS: This will cause ALL the USB devices to redetect.
Let me know if this works
Hi there guys , Im currently in a bit of a predicament. I installed XboxMods 1.04 And have been using it for a few months now. Now ive noticed NoDo is the latest ROM available. And want to get the ball rolling and get it flashed. Theres a few problems
1. When i connect my Phone to my PC , I get no 'Installing Device Driver' on my Win7 PC , I used to be connected via Zune , But i did a hard reset and havent checked since then :S
2. When i try to 'flash' i get no USB device detected etc.
3. In the HSPL screen there is no USB either its either SERIAL or Blank.
The basis is , I cant flash / use zune or anything atm.
I HAVE tried numerous USB Cables , all to no avail , Ive done 2 more Hard resets. And atm im a bit stumped on what the hell i can do.
*** EDIT*** Clean Install of Windows 7 X64 Ultimate , Hard Reset Number 6. Still nothing. I have ONLY Been using MAGLDR to flash with via USB Flash mode. HSPL / Zune / MAGLDR Do not recognise that a USB Cable has been put in. The only thing that happens is the 'charging' portion. Could this be the data side of the port being damaged?
You wouldnt flash it through the HSPL anyway if you already have an older build of wp7. You would flash it through MGLDR.
Turn phone off. Turn it back on but hold the power button until mgldr loads it menu where you can choose usb flasher. Run that plug in via usb and run dwi.exe.
reeg420 said:
You wouldnt flash it through the HSPL anyway if you already have an older build of wp7. You would flash it through MGLDR.
Turn phone off. Turn it back on but hold the power button until mgldr loads it menu where you can choose usb flasher. Run that plug in via usb and run dwi.exe.
Click to expand...
Click to collapse
Im doing that , And it doesnt notice im plugged in via USB
Check the drivers in device manager. Forgot what the name is but I had this problem also once. I uninstalled the driver then when I plugged the phone in again in reinstalled the driver and all worked fine after that.
Edit: daf.exe installs drier
reeg420 said:
Check the drivers in device manager. Forgot what the name is but I had this problem also once. I uninstalled the driver then when I plugged the phone in again in reinstalled the driver and all worked fine after that.
Edit: daf.exe installs drier
Click to expand...
Click to collapse
There is nothing in device manager to uninstall , ive done a clean install of Windows 7 X64 to see if that was the problem. And no it still doesnt show up.
Im seriously doubting 2 cables can be dead. Ones pretty much brand new.
Plug phone in while in USB flasher and run daf.exe from the original magldr download. Should pick up and install drivers from there. Or check out the band Android section for more specifics on magldr that's where alot of results came from when I googled daf.exe
Sent from my hd2 using XDA Windows Phone 7 App
Im sure your not listening to what i say.
USB Flasher Mode and ALL USB Modes dont work.
USB Flasher mode
Wait USB....
**Plugs in USB** Nothing happens. It just stays on Wait USB and has done the whole time.
And again , i have NOT been trying to flash via HSPL i never said i had at all. I used HSPL to check to see if it noticed USB connection. As when your in HSPL and plug it into USB itll say USB... Not be Blamk or say Serial.
My feeling is that the Data Parts of the USB are dead, It still charges fine , just doesnt let any data through
Hi Guys,
Please I am in some serious mess and I need help. i messed up with my bootloader and now my phone seems dead. now here's what happens, the phone is completely dead and does not power on. any time i connect it to pc, it shows under device manager as USB Input device. under the tap 'HUMAN INTERFACE DEVICE (HID) the red light stays on for some time then it goes off. Actually i have all the necessary flash firmwares to kick it back to life, but the issue i am having is, my phone is not being detected by my pc. i installed Gionee drivers from the official webpage but still it won't detect my phone. it always sees my phone as 'USB INPUT DEVICE' i was told it needs to be detected under com port before my flashing sotware can recognize it.
please Help
Steps Parku said:
Hi Guys,
Please I am in some serious mess and I need help. i messed up with my bootloader and now my phone seems dead. now here's what happens, the phone is completely dead and does not power on. any time i connect it to pc, it shows under device manager as USB Input device. under the tap 'HUMAN INTERFACE DEVICE (HID) the red light stays on for some time then it goes off. Actually i have all the necessary flash firmwares to kick it back to life, but the issue i am having is, my phone is not being detected by my pc. i installed Gionee drivers from the official webpage but still it won't detect my phone. it always sees my phone as 'USB INPUT DEVICE' i was told it needs to be detected under com port before my flashing sotware can recognize it.
please Help
Click to expand...
Click to collapse
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Still Not Helpful.
freak_on said:
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Click to expand...
Click to collapse
Thanks for the support, but actually i have already visited the link. right now, the issue is, my device detects as a USB HID DEVICE, instead of the qualcom. i have downloaded all the necessary drivers but still. And the above link said he has no idea how to deal with that.
Steps Parku said:
Thanks for the support, but actually i have already visited the link. right now, the issue is, my device detects as a USB HID DEVICE, instead of the qualcom. i have downloaded all the necessary drivers but still. And the above link said he has no idea how to deal with that.
Click to expand...
Click to collapse
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Still Not Helpful.
andresplata94 said:
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Click to expand...
Click to collapse
Still Not Helpful.
andresplata94 said:
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Click to expand...
Click to collapse
Hi, Thanks for the help but i did that several times, i even formatted my pc re-installed windows, re-installed the gionee drivers and over and over again, i even tried doing this from windows xp, 32bit, 64 bit, windows vista, windows 7, windows 8. and in all of this above mentioned os, anytime i connect my phone, it displays under Human Interface Devices as USB INPUT DEVICE, with the red light flashing. in this mode, GNQ downloader never gets to recognize my phone. Please any help?
:crying:
Same Problem...
Steve, did you solve the problem? If yes, how did you solve it?
I have the same problem with my Blu Life Pure XL, which is a similar phone.
Regards,
Ricardo
Steps Parku said:
Hi, Thanks for the help but i did that several times, i even formatted my pc re-installed windows, re-installed the gionee drivers and over and over again, i even tried doing this from windows xp, 32bit, 64 bit, windows vista, windows 7, windows 8. and in all of this above mentioned os, anytime i connect my phone, it displays under Human Interface Devices as USB INPUT DEVICE, with the red light flashing. in this mode, GNQ downloader never gets to recognize my phone. Please any help?
:crying:
Click to expand...
Click to collapse
freak_on said:
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Click to expand...
Click to collapse
hey.
I have this problem with my e7 ,
could you fix it , please ?
I have the same problem with zte nubia z7max, so its qualcomm issue that has rarely been talked about and I couldn't find any solution to it at all too.
if find one,let me know plzzzz.
thnx